WORK TOOLS
BUCKET GPWORK TOOLS
BUCKET GP#SEBP48741610
460-4325: BUCKET AR-GENERAL PURPOSE
460-4325 BUCKET AR-GENERAL PURPOSE -B-FAMILY
S/N KGF1-UP; FAL1-UP
600-MM (24-IN) WIDE X 0.46-CU M (0.61-CU YD) CAPACITY
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
600-MM (24-IN) WIDE X 0.46-CU M (0.61-CU YD) CAPACITY
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741611
342-9482: BUCKET AR-HEAVY DUTY
342-9482 BUCKET AR-HEAVY DUTY -HEAVY-DUTY, B-FAMILY
S/N KGF1-UP; FAL1-UP
1072-MM (42-IN) WIDE X 1-CU M (1.3-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1072-MM (42-IN) WIDE X 1-CU M (1.3-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741612
356-1585: BUCKET AR-HEAVY DUTY
356-1585 BUCKET AR-HEAVY DUTY -B-FAMILY
S/N KGF1-UP; FAL1-UP
1080-MM (42.5-IN) WIDE X 1-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1080-MM (42.5-IN) WIDE X 1-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741613
342-9483: BUCKET AR-HEAVY DUTY ROCK
342-9483 BUCKET AR-HEAVY DUTY ROCK -HEAVY-DUTY ROCK, B-FAMILY
S/N KGF1-UP; FAL1-UP
1072-MM (42-IN) WIDE X 1-CU M (1.3-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1072-MM (42-IN) WIDE X 1-CU M (1.3-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741614
121-1807: BUCKET AS-DITCH CLEANING
121-1807 BUCKET AS-DITCH CLEANING
S/N KGF1-UP
1110-MM (44-IN) WIDE X 0.60-CU M (0.79-CU YD) CAPACITY
FOR USE WITH LONG REACH LINKAGE ARRANGEMENT
AN ATTACHMENT
S/N KGF1-UP
1110-MM (44-IN) WIDE X 0.60-CU M (0.79-CU YD) CAPACITY
FOR USE WITH LONG REACH LINKAGE ARRANGEMENT
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741615
290-6000: BUCKET AS-DITCH CLEANING
290-6000 BUCKET AS-DITCH CLEANING -B-FAMILY
S/N FAL1-UP
1830-MM (72-IN) WIDE X 1.24-CU M (1.62-CU YD) CAPACITY
PART OF 327-3660 BUCKET GP-DITCH CLEANING
AN ATTACHMENT
S/N FAL1-UP
1830-MM (72-IN) WIDE X 1.24-CU M (1.62-CU YD) CAPACITY
PART OF 327-3660 BUCKET GP-DITCH CLEANING
AN ATTACHMENT
For full view, you need register
#SEBP48741616
251-3923: BUCKET AS-EXCAVATION
251-3923 BUCKET AS-EXCAVATION -B-FAMILY
S/N KGF1-UP
1200-MM (47-IN) WIDE X 1.08-CU M (1.4-CU YD) CAPACITY. K-80 ADAPTERS, QTY OF 5
PART OF 251-3871 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP
1200-MM (47-IN) WIDE X 1.08-CU M (1.4-CU YD) CAPACITY. K-80 ADAPTERS, QTY OF 5
PART OF 251-3871 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 251-8684 | [1] | PLATE AS-BOX | |
| 2. | 251-3523 | [2] | PLATE-WEAR | |
| 3. | 251-8674 | [6] | PLATE-WEAR | |
| 4. | 251-8663 | [1] | EDGE AS | |
| 4A. | 220-9086 | [1] | ADAPTER-TIP (K-80, 2-STRAP, LH) | |
| 4B. | 220-9084 | [3] | ADAPTER-TIP (K-80, 2-STRAP, CENTER) | |
| 4C. | 220-9085 | [1] | ADAPTER-TIP (K-80, 2-STRAP, RH) | |
| 4D. | 8P-9770 | [1] | PLATE |
#SEBP48741617
290-5892: BUCKET AS-EXCAVATION
290-5892 BUCKET AS-EXCAVATION -B-FAMILY
S/N KGF1-UP; FAL1-UP
1224-MM (48-IN) WIDE X 1-CU M (1.3-CU YD) CAPACITY. K-90 ADAPTERS, (6X)
PART OF 290-5890 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1224-MM (48-IN) WIDE X 1-CU M (1.3-CU YD) CAPACITY. K-90 ADAPTERS, (6X)
PART OF 290-5890 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 279-4094 | [1] | EDGE AS | |
| 1A. | 232-2096 | [1] | ADAPTER-TIP (K-90, 2-STRAP, LH) | |
| 1B. | 220-9094 | [4] | ADAPTER-TIP (K-90, 2-STRAP, CENTER) | |
| 1C. | 232-2095 | [1] | ADAPTER-TIP (K-90, 2-STRAP, RH) | |
| 1D. | 8P-9770 | [1] | PLATE | |
| 2. | [2] | PLATE-WEAR | ||
| 3. | 293-5678 | [4] | PLATE-WEAR | |
| 4. | 262-3840 | [1] | PLATE-WEAR | |
| 5. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
#SEBP48741618
290-5893: BUCKET AS-GENERAL PURPOSE
290-5893 BUCKET AS-GENERAL PURPOSE -B-FAMILY
S/N KGF1-UP; FAL1-UP
1224-MM (48-IN) WIDE X 0.9-CU M (1.18-CU YD) CAPACITY. K-90 ADAPTERS, (6X)
PART OF 290-5891 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1224-MM (48-IN) WIDE X 0.9-CU M (1.18-CU YD) CAPACITY. K-90 ADAPTERS, (6X)
PART OF 290-5891 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 279-4094 | [1] | EDGE AS | |
| 1A. | 232-2096 | [1] | ADAPTER-TIP (K-90, 2-STRAP, LH) | |
| 1B. | 220-9094 | [4] | ADAPTER-TIP (K-90, 2-STRAP, CENTER) | |
| 1C. | 232-2095 | [1] | ADAPTER-TIP (K-90, 2-STRAP, RH) | |
| 1D. | 8P-9770 | [1] | PLATE | |
| 2. | 294-5258 | [2] | PLATE-WEAR | |
| 3. | 293-5678 | [4] | PLATE-WEAR | |
| 4. | 262-3840 | [1] | PLATE-WEAR | |
| 5. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) |
#SEBP48741619
331-1879: BUCKET AS-GENERAL PURPOSE
331-1879 BUCKET AS-GENERAL PURPOSE -CB-FAMILY
S/N KGF1-UP; FAL1-UP
1333-MM (52-IN) WIDE X 1.1-CU M (1.4-CU YD) CAPACITY. K-100 ADAPTERS, QTY OF 5
PART OF 331-1878 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1333-MM (52-IN) WIDE X 1.1-CU M (1.4-CU YD) CAPACITY. K-100 ADAPTERS, QTY OF 5
PART OF 331-1878 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 331-1889 | [1] | HINGE AS | |
| 2. | 331-1885 | [1] | PLATE (RH) | |
| 3. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 4. | 331-1887 | [2] | PLATE-WEAR | |
| 5. | 331-1888 | [4] | PLATE-WEAR | |
| 6. | 331-1894 | [1] | PLATE-WEAR | |
| 7. | 331-1881 | [1] | EDGE AS | |
| 7A. | 232-2106 | [1] | ADAPTER-TIP (K-100, 2-STRAP, LH) | |
| 7B. | 220-9104 | [3] | ADAPTER-TIP (K-100, 2-STRAP, CENTER) | |
| 7C. | 232-2105 | [1] | ADAPTER-TIP (K-100, 2-STRAP, RH) | |
| 7D. | 8P-9770 | [1] | PLATE | |
| 8. | 331-1884 | [1] | PLATE (LH) |
Information:
WORK TOOLS
BUCKET GP
Operation and Maintenance Manual
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Service Magazine
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
