WORK TOOLS
BUCKET GPWORK TOOLS
BUCKET GP
#SEBP48741620
347-6719: BUCKET AS-GENERAL PURPOSE
347-6719 BUCKET AS-GENERAL PURPOSE -B-FAMILY
S/N KGF1-UP; FAL1-UP
1150-MM (46-IN) WIDE X 0.9-CU-M (1.18-CU YD) CAPACITY. K-80 ADAPTERS, QTY OF 5
PART OF 347-6717 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1150-MM (46-IN) WIDE X 0.9-CU-M (1.18-CU YD) CAPACITY. K-80 ADAPTERS, QTY OF 5
PART OF 347-6717 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 347-7584 | [1] | EDGE AS | |
| 1A. | 8P-9770 | [1] | PLATE | |
| 1B. | 220-9084 | [3] | ADAPTER-TIP (K-80, 2-STRAP, CENTER) | |
| 1C. | 232-2085 | [1] | ADAPTER-TIP (K-80, 2-STRAP, RH) | |
| 1D. | 232-2086 | [1] | ADAPTER-TIP (K-80, 2-STRAP, LH) | |
| 2. | 347-7532 | [1] | PLATE AS (RH) | |
| 2A. | 347-7477 | [1] | PLATE-WEAR | |
| 2B. | 347-7534 | [1] | PLATE | |
| 3. | 347-7479 | [1] | PLATE-WEAR | |
| 4. | 347-7482 | [4] | PLATE-WEAR | |
| 5. | 347-7527 | [1] | PLATE AS-HINGE | |
| 6. | 347-7531 | [1] | PLATE AS (LH) | |
| 6A. | 347-7477 | [1] | PLATE-WEAR | |
| 6B. | 347-7533 | [1] | PLATE |
#SEBP48741621
347-6720: BUCKET AS-GENERAL PURPOSE
347-6720 BUCKET AS-GENERAL PURPOSE -B-FAMILY
S/N KGF1-UP; FAL1-UP
1260-MM (50-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. K-80 ADAPTERS, QTY OF 5
PART OF 347-6718 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1260-MM (50-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. K-80 ADAPTERS, QTY OF 5
PART OF 347-6718 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 347-7586 | [1] | EDGE AS | |
| 1A. | 8P-9770 | [1] | PLATE | |
| 1B. | 220-9084 | [3] | ADAPTER-TIP (K-80, 2-STRAP, CENTER) | |
| 1C. | 232-2085 | [1] | ADAPTER-TIP (K-80, 2-STRAP, RH) | |
| 1D. | 232-2086 | [1] | ADAPTER-TIP (K-80, 2-STRAP, LH) | |
| 2. | 347-7532 | [1] | PLATE AS (RH) | |
| 2A. | 347-7477 | [1] | PLATE-WEAR | |
| 2B. | 347-7534 | [1] | PLATE | |
| 3. | 347-7480 | [1] | PLATE-WEAR | |
| 4. | 347-7483 | [4] | PLATE-WEAR | |
| 5. | 347-7528 | [1] | PLATE AS-HINGE | |
| 6. | 347-7531 | [1] | PLATE AS (LH) | |
| 6A. | 347-7477 | [1] | PLATE-WEAR | |
| 6B. | 347-7533 | [1] | PLATE |
#SEBP48741622
356-8419: BUCKET AS-GENERAL PURPOSE
356-8419 BUCKET AS-GENERAL PURPOSE -B-FAMILY
S/N KGF1-UP; FAL1-UP
1232-MM (49-IN) WIDE X 0.9-CU M (1.2-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 356-8418 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1232-MM (49-IN) WIDE X 0.9-CU M (1.2-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 356-8418 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 357-0518 | [1] | EDGE AS | |
| 1A. | 6I-6354 | [3] | ADAPTER-TIP (J-350, 2-STRAP, CENTER) | |
| 1B. | 6I-6355 | [1] | ADAPTER-TIP (J-350, 2-STRAP, RH) | |
| 1C. | 6I-6356 | [1] | ADAPTER-TIP (J-350, 2-STRAP, LH) | |
| 1D. | 8P-9770 | [1] | PLATE | |
| 2. | 358-6043 | [1] | PLATE AS-BOX | |
| 3. | 358-5459 | [1] | PLATE-WEAR | |
| 4. | 355-1682 | [2] | PLATE-WEAR | |
| 5. | 358-5457 | [4] | PLATE-WEAR | |
| 6. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 7. | 355-1675 | [1] | PLATE (LH) | |
| 8. | 355-1676 | [1] | PLATE (RH) |
#SEBP48741623
358-8627: BUCKET AS-GENERAL PURPOSE
358-8627 BUCKET AS-GENERAL PURPOSE
S/N KGF1-UP
900-MM (36-IN) WIDE X 0.5-CU M (0.7-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 5
PART OF 358-8615 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP
900-MM (36-IN) WIDE X 0.5-CU M (0.7-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 5
PART OF 358-8615 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS#SEBP48741624
371-9082: BUCKET AS-GENERAL PURPOSE
371-9082 BUCKET AS-GENERAL PURPOSE -B-FAMILY
S/N KGF1-UP; FAL1-UP
1250-MM (50-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 347-6849 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1250-MM (50-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 347-6849 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 378-0320 | [1] | EDGE AS | |
| 1A. | 6I-6354 | [3] | ADAPTER-TIP (J-350, 2-STRAP, CENTER) | |
| 1B. | 6I-6355 | [1] | ADAPTER-TIP (J-350, 2-STRAP, RH) | |
| 1C. | 6I-6356 | [1] | ADAPTER-TIP (J-350, 2-STRAP, LH) | |
| 1D. | 8P-9770 | [1] | PLATE | |
| 2. | 347-7480 | [1] | PLATE-WEAR | |
| 3. | 347-7483 | [4] | PLATE-WEAR | |
| 4. | 371-9130 | [1] | PLATE AS-HINGE | |
| 5. | 378-0319 | [2] | PLATE-WEAR |
#SEBP48741625
390-5448: BUCKET AS-GENERAL PURPOSE
390-5448 BUCKET AS-GENERAL PURPOSE -B-FAMILY
S/N KGF1-UP; FAL1-UP
1150-M (46-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 377-5419 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1150-M (46-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 377-5419 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 390-6802 | [1] | PLATE AS-HINGE | |
| 2. | 347-7479 | [1] | PLATE-WEAR | |
| 3. | 347-7482 | [4] | PLATE-WEAR | |
| 4. | 378-0319 | [2] | PLATE-WEAR | |
| 5. | 390-5451 | [1] | EDGE AS | |
| 5A. | 6I-6354 | [3] | ADAPTER-TIP (J-350, 2-STRAP, CENTER) | |
| 5B. | 6I-6355 | [1] | ADAPTER-TIP (J-350, 2-STRAP, RH) | |
| 5C. | 6I-6356 | [1] | ADAPTER-TIP (J-350, 2-STRAP, LH) | |
| 5D. | 8P-9770 | [1] | PLATE |
#SEBP48741626
418-5244: BUCKET AS-GENERAL PURPOSE
418-5244 BUCKET AS-GENERAL PURPOSE -B-FAMILY
S/N KGF1-UP; FAL1-UP
1250-MM (50-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 418-5243 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1250-MM (50-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 418-5243 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 378-0320 | [1] | EDGE AS | |
| 1A. | 8P-9770 | [1] | PLATE | |
| 1B. | 6I-6354 | [3] | ADAPTER-TIP (J-350, 2-STRAP, CENTER) | |
| 1C. | 6I-6355 | [1] | ADAPTER-TIP (J-350, 2-STRAP, RH) | |
| 1D. | 6I-6356 | [1] | ADAPTER-TIP (J-350, 2-STRAP, LH) | |
| 2. | 347-7480 | [1] | PLATE-WEAR | |
| 3. | 347-7483 | [4] | PLATE-WEAR | |
| 4. | 378-0319 | [2] | PLATE-WEAR | |
| 5. | 371-9130 | [1] | PLATE AS-HINGE |
#SEBP48741627
420-3351: BUCKET AS-GENERAL PURPOSE
420-3351 BUCKET AS-GENERAL PURPOSE -B-FAMILY
S/N KGF1-UP; FAL1-UP
1150-MM (46-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 420-3353 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
1150-MM (46-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY. J-350 ADAPTERS, QTY OF 5
PART OF 420-3353 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 390-6802 | [1] | PLATE AS-HINGE | |
| 2. | 347-7479 | [1] | PLATE-WEAR | |
| 3. | 347-7482 | [4] | PLATE-WEAR | |
| 4. | 390-5451 | [1] | EDGE AS | |
| 4A. | 8P-9770 | [1] | PLATE | |
| 4B. | 6I-6354 | [3] | ADAPTER-TIP (J-350, 2-STRAP, CENTER) | |
| 4C. | 6I-6355 | [1] | ADAPTER-TIP (J-350, 2-STRAP, RH) | |
| 4D. | 6I-6356 | [1] | ADAPTER-TIP (J-350, 2-STRAP, LH) | |
| 5. | 378-0319 | [2] | PLATE-WEAR |
#SEBP48741628
7Y-6660: BUCKET AS-GENERAL PURPOSE
7Y-6660 BUCKET AS-GENERAL PURPOSE
S/N KGF1-UP
770-MM (30-IN) WIDE X 0.45-CU M (0.58-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 5
PART OF 7Y-6402 BUCKET GP-GENERAL PURPOSE
AN ATTACHMENT
S/N KGF1-UP
770-MM (30-IN) WIDE X 0.45-CU M (0.58-CU YD) CAPACITY. J-250 ADAPTERS, QTY OF 5
PART OF 7Y-6402 BUCKET GP-GENERAL PURPOSE
AN ATTACHMENT
For full view, you need register
#SEBP48741629
287-6233: BUCKET AS-HEAVY DUTY
287-6233 BUCKET AS-HEAVY DUTY -B-FAMILY
S/N KGF1-UP; FAL1-UP
615-MM (24-IN) WIDE X 0.47-CU M (0.61-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 3
PART OF 327-3652 BUCKET GP-HEAVY DUTY
AN ATTACHMENT
S/N KGF1-UP; FAL1-UP
615-MM (24-IN) WIDE X 0.47-CU M (0.61-CU YD) CAPACITY. K-90 ADAPTERS, QTY OF 3
PART OF 327-3652 BUCKET GP-HEAVY DUTY
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 279-4090 | [1] | EDGE AS | |
| 1A. | 232-2096 | [1] | ADAPTER-TIP (K-90, 2-STRAP, LH) | |
| 1B. | 220-9094 | [1] | ADAPTER-TIP (K-90, 2-STRAP, CENTER) | |
| 1C. | 232-2095 | [1] | ADAPTER-TIP (K-90, 2-STRAP, RH) | |
| 1D. | 8P-9770 | [1] | PLATE | |
| 2. | 295-6864 | [1] | PLATE AS-BOX | |
| 3. | 287-6298 | [2] | PLATE-WEAR | |
| 4. | 273-3426 | [5] | PLATE-WEAR | |
| 5. | 273-3429 | [1] | PLATE-WEAR | |
| 6. | 273-3423 | [1] | PLATE-REINFORCEMENT | |
| 7. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) |
Information:
WORK TOOLS
BUCKET GP
Operation and Maintenance Manual
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Service Magazine
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
