AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

235-8910 CAB GP -EXTERIOR S/N KGF1-UP; FAL1-UP PART OF 229-9097, 229-9099, 229-9101, 229-9109 CAB GP Type 1 AN ATTACHMENT 320D


OPERATOR STATION
CAB GP

EXCAVATOR 320D EXCAVATOR FAL
 320D & 320D L Excavators FAL00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4874 320D FAL   (2006)

OPERATOR STATION

CAB GP
CAB GP
235-8908 CAB GP
CAB GP
235-8908 CAB GP
CAB GP
235-8910 CAB GP
CAB GP
235-8910 CAB GP
CAB GP
235-8910 CAB GP
CAB GP
235-8910 CAB GP
 

#SEBP48741750
 

235-8910: CAB GP

235-8910 CAB GP -EXTERIOR
S/N KGF1-UP; FAL1-UP
PART OF 229-9097, 229-9099, 229-9101, 229-9109 CAB GP
Type 1
AN ATTACHMENT
i02503145 SEBP4874
2358910 CAB GP Parts scheme 2358910 CAB GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER  
2. 139-7127 [1] HOLDER  
3. 156-6599 [1] STRIKER  
4. 161-3685 [1] ROD  
5. 235-8933 [1] HANDLE AS  
6. 161-3697 [1] GUARD  
7. 164-0523 [1] LEVER AS  
8. 164-0527 [1] ROD  
9. 164-0528 Y [1] LEVER GP-CAB DOOR  
10. 167-7018 [1] COVER AS  
11. 167-7042 [2] SEAL  
12. 171-7426 [1] CABLE AS  
13. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
14. 176-1942 [1] COVER  
15. 178-5570 [2] GROMMET  
16. 185-8196 [1] GROMMET  
17. 189-2704 [1] SEAL  
18. 189-3396 M [5] NUT (M10X1.5-THD)  
19. 189-3409 [3] WASHER  
20. 201-4530 [1] BRACKET AS  
21. 205-6295 [1] LATCH AS  
22. 210-5808 [1] SEAL  
23. 235-8912 [1] HANDLE AS  
24. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
25. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
26. 133-8016 [1] PACKING  
27. 156-6617 [1] MIRROR  
28. 259-7295 CY [1] BRACKET GP-MIRROR  
29. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)(DOME)  
30. 1R-5998 [2] LOCKWASHER  
31. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
32. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 3E-9874 M [2] SCREW-OVAL HEAD  
34. 4I-1205 [2] BUMPER  
35. 4I-1206 [2] GUIDE  
36. 4I-3063 [1] SPRING  
37. 4I-3123 M [2] BOLT (M10X1.5X20-MM)  
38. 4I-3144 [2] WASHER-HARD (10.2X22X3.2-MM THK)  
39. 4I-4270 [1] HOLDER-GLASS  
40. 4I-4392 [3] CLIP  
41. 5C-7793 [1] HOOK-COAT  
42. 6V-7636 [4] PIN AS-SPRING  
43. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
    -OR-
  099-3607 [2] WASHER-HARD (10.2X30X3.2-MM THK)  
44. 8T-4779 CM [1] BOLT (M16X2X35-MM)  
45. 9X-2041 M [1] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
46. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
47. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
48. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
49. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
50. 6I-5470 E SEAL (150-CM)  
51. 085-6452 [2] WASHER  
52. 105-2169 [2] BOLT AS  
53. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
54. 4I-3090 [4] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48741751
 

235-8910: CAB GP

235-8910 CAB GP -EXTERIOR
S/N KGF1-UP; FAL1-UP
PART OF 229-9097, 229-9099, 229-9101, 229-9109, 336-1136 CAB GP
Type 2
AN ATTACHMENT
i03087760 SEBP4874
2358910 CAB GP Parts scheme 2358910 CAB GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER  
2. 139-7127 [1] HOLDER  
3. 156-6599 [1] STRIKER  
4. 161-3685 [1] ROD  
5. 450-4908 [1] HANDLE AS  
6. 161-3697 [1] GUARD  
7. 164-0523 [1] LEVER AS  
8. 164-0527 [1] ROD  
9. 164-0528 Y [1] LEVER GP-CAB DOOR  
10. 167-7018 [1] COVER AS  
11. 167-7042 [2] SEAL  
12. 171-7426 [1] CABLE AS  
13. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
14. 176-1942 [1] COVER  
15. 178-5570 [2] GROMMET  
16. 185-8196 [1] GROMMET  
17. 189-2704 [1] SEAL  
18. 8T-4133 M [5] NUT (M10X1.5-THD)  
19. 4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
20. 201-4530 [1] BRACKET AS  
21. 205-6295 [1] LATCH AS  
22. 416-4309 [1] SEAL  
23. 235-8912 [1] HANDLE AS  
24. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
25. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
26. 133-8016 [1] PACKING  
27. 327-6550 CY [1] MIRROR GP-REAR VIEW  
28. 346-7375 Y [1] MOUNTING GP-MIRROR  
29. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)(DOME)  
30. 1R-5998 [4] LOCKWASHER  
31. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
32. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 3E-9874 M [2] SCREW-OVAL HEAD  
34. 4I-1205 [2] BUMPER  
35. 4I-1206 [2] GUIDE  
36. 4I-3063 [1] SPRING  
37. 4I-3123 M [2] BOLT (M10X1.5X20-MM)  
38. 4I-3144 [2] WASHER-HARD (10.2X22X3.2-MM THK)  
39. 4I-4270 [1] HOLDER-GLASS  
40. 4I-4392 [3] CLIP  
41. 5C-7793 [1] HOOK-COAT  
42. 6V-7636 [4] PIN AS-SPRING  
43. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
44. 8T-4779 M [1] BOLT (M16X2X35-MM)  
45. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
46. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
47. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
48. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
49. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
50. 6I-5470 E SEAL (140-CM)  
52. 105-2169 [2] BOLT AS  
53. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
54. 4I-3090 [4] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48741752
 

235-8910: CAB GP

235-8910 CAB GP -EXTERIOR
S/N KGF1-UP; FAL1-UP
PART OF 229-9097, 229-9099, 229-9101, 229-9109, 336-1136 CAB GP
Type 3
AN ATTACHMENT
i06048996 SEBP4874
2358910 CAB GP Parts scheme 2358910 CAB GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER  
2. 139-7127 [1] HOLDER  
3. 156-6599 [1] STRIKER  
4. 161-3685 [1] ROD  
5. 450-4908 [1] HANDLE AS  
6. 161-3697 [1] GUARD  
7. 164-0523 [1] LEVER AS  
8. 164-0527 [1] ROD  
9. 164-0528 Y [1] LEVER GP-CAB DOOR  
10. 167-7018 [1] COVER AS  
11. 167-7042 [2] SEAL  
12. 171-7426 [1] CABLE AS  
13. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
14. 176-1942 [1] COVER  
15. 178-5570 [2] GROMMET  
16. 185-8196 [1] GROMMET  
17. 189-2704 [1] SEAL  
18. 8T-4133 M [5] NUT (M10X1.5-THD)  
19. 4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
20. 201-4530 [1] BRACKET AS  
21. 383-5666 [1] LATCH AS  
22. 416-4309 [1] SEAL  
23. 235-8912 [1] HANDLE AS  
24. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
25. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
26. 133-8016 [1] PACKING  
27. 443-7858 CY [1] MIRROR GP-REAR VIEW  
28. 346-7375 Y [1] MOUNTING GP-MIRROR  
29. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)(DOME)  
30. 1R-5998 [4] LOCKWASHER  
31. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
32. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 3E-9874 M [2] SCREW-OVAL HEAD  
34. 4I-1205 [2] BUMPER  
35. 4I-1206 [2] GUIDE  
36. 4I-3063 [1] SPRING  
37. 4I-3123 M [2] BOLT (M10X1.5X20-MM)  
38. 7X-7729 C [2] WASHER (11X25X3-MM THK)  
39. 4I-4270 [1] HOLDER-GLASS  
40. 4I-4392 [3] CLIP  
41. 5C-7793 [1] HOOK-COAT  
42. 6V-7636 [4] PIN AS-SPRING  
43. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
44. 451-2180 CM [1] BOLT (M16X2X35-MM)  
45. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
46. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
47. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
48. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
49. 451-2175 C [1] WASHER-HARD (17.5X30X3.5-MM THK)  
50. 6I-5470 E SEAL (140-CM)  
52. 105-2169 [2] BOLT AS  
53. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
54. 4I-3090 [4] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48741753
 

235-8910: CAB GP

235-8910 CAB GP -EXTERIOR
S/N KGF1-UP; FAL1-UP
PART OF 229-9097, 229-9099, 229-9101, 229-9109, 336-1136 CAB GP
Type 4
AN ATTACHMENT
i06651198 SEBP4874
2358910 CAB GP Parts scheme 2358910 CAB GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER  
2. 139-7127 [1] HOLDER  
3. 156-6599 [1] STRIKER  
4. 161-3685 [1] ROD  
5. 450-4908 [1] HANDLE AS  
6. 161-3697 [1] GUARD  
7. 164-0523 [1] LEVER AS  
8. 164-0527 [1] ROD  
9. 164-0528 Y [1] LEVER GP-CAB DOOR  
10. 167-7018 [1] COVER AS  
11. 167-7042 [2] SEAL  
12. 171-7426 [1] CABLE AS  
13. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
14. 176-1942 [1] COVER  
15. 178-5570 [2] GROMMET  
16. 185-8196 [1] GROMMET  
17. 189-2704 [1] SEAL  
18. 8T-4133 M [5] NUT (M10X1.5-THD)  
19. 4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
20. 201-4530 [1] BRACKET AS  
21. 383-5666 [1] LATCH AS  
22. 416-4309 [1] SEAL  
23. 235-8912 [1] HANDLE AS  
24. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
25. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
26. 133-8016 [1] PACKING  
27. 394-9460 CY [1] MIRROR GP  
28. 346-7375 Y [1] MOUNTING GP-MIRROR  
29. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)(DOME)  
30. 1R-5998 [4] LOCKWASHER  
31. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
32. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 3E-9874 M [2] SCREW-OVAL HEAD  
34. 4I-1205 [2] BUMPER  
35. 4I-1206 [2] GUIDE  
36. 4I-3063 [1] SPRING  
37. 4I-3123 M [2] BOLT (M10X1.5X20-MM)  
38. 7X-7729 [2] WASHER (11X25X3-MM THK)  
39. 4I-4270 [1] HOLDER-GLASS  
40. 4I-4392 [3] CLIP  
41. 5C-7793 [1] HOOK-COAT  
42. 6V-7636 [4] PIN AS-SPRING  
43. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
44. 451-2180 M [1] BOLT (M16X2X35-MM)  
45. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
46. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
47. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
48. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
49. 451-2175 [1] WASHER-HARD (17.5X30X3.5-MM THK)  
50. 6I-5470 E SEAL (140-CM)  
52. 105-2169 [2] BOLT AS  
53. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
54. 4I-3090 [4] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48741754
 

235-8917: CAB GP

235-8917 CAB GP -INTERIOR
S/N KGF1-UP; FAL1-UP
PART OF 229-9109 CAB GP
Type 1
AN ATTACHMENT
i02485118 SEBP4874
2358917 CAB GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-6352 [1] LOUVER AS  
2. 164-0646 [1] CUP  
3. 164-0655 [1] PANEL-SWITCH  
4. 164-8474 [2] LOUVER AS-VENT  
5. 170-9724 [5] CLIP  
6. 171-7420 [10] CLIP  
7. 176-1972 [1] COVER  
8. 185-8205 [7] CLIP  
9. 185-8214 [1] BRACKET AS  
10. 189-2678 [3] SPACER  
11. 189-2853 [1] COVER  
12. 189-2854 [1] COVER  
13. 234-6468 [1] COVER AS  
  259-7353 [4] CLIP  
14. 234-6470 [1] COVER-MONITOR  
15. 234-6471 [1] COVER-DUCT  
16. 234-6472 [1] COVER  
17. 234-6473 [1] COVER-FRONT (UPPER, RH)  
18. 234-6474 [1] COVER-CONSOLE (UPPER, RH)  
19. 234-6475 [1] COVER (LOWER, RH)  
20. 234-6476 [1] DUCT  
21. 234-6477 [1] BRACKET AS  
22. 234-6478 [1] BRACKET AS  
23. 234-6480 [1] BRACKET AS  
24. 234-6483 [1] BRACKET AS  
25. 234-6485 [1] BRACKET AS  
26. 234-6490 [1] CUP  
27. 234-6491 [1] COVER  
28. 234-6497 [1] COVER  
29. 234-6498 [3] RIVET  
30. 234-6521 [1] COVER  
31. 234-6547 [1] COVER  
32. 234-6548 [1] COVER  
33. 234-6549 [1] COVER  
34. 234-6550 [1] COVER  
35. 234-6579 [2] NUT-SPEED  
36. 235-8922 [1] COVER  
37. 235-8923 [2] CAP  
38. 235-8930 [1] LINER  
39. 235-8950 [12] CLIP  
40. 245-7790 [2] SCREW-TAPPING  
41. 128-2135 M [13] SCREW-TRUSS HEAD (M6X1X13-MM)  
42. 128-2136 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 189-2855 [1] COVER  
44. 234-6469 [1] COVER  
45. 9X-2042 M [23] SCREW-TRUSS HEAD (M6X1X12-MM)  
  M   METRIC PART
 

#SEBP48741755
 

235-8917: CAB GP

235-8917 CAB GP -INTERIOR
S/N KGF1-UP; FAL1-UP
PART OF 229-9109, 346-8055 CAB GP
Type 2
AN ATTACHMENT
i02783571 SEBP4874
2358917 CAB GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-6352 [1] LOUVER AS  
2. 164-0646 [1] CUP  
3. 164-0655 [1] PANEL-SWITCH  
4. 164-8474 [2] LOUVER AS-VENT  
5. 170-9724 [5] CLIP  
6. 171-7420 [10] CLIP  
7. 176-1972 [1] COVER  
8. 185-8205 [7] CLIP  
9. 185-8214 [1] BRACKET AS  
10. 189-2678 [3] SPACER  
11. 189-2853 [1] COVER  
12. 189-2854 [1] COVER  
13. 234-6468 [1] COVER AS  
  259-7353 [4] CLIP  
14. 234-6470 [1] COVER-MONITOR  
15. 234-6471 [1] COVER-DUCT  
16. 234-6472 [1] COVER  
17. 234-6473 [1] COVER-FRONT (UPPER, RH)  
18. 234-6474 [1] COVER-CONSOLE (UPPER, RH)  
20. 234-6476 [1] DUCT  
21. 234-6477 [1] BRACKET AS  
23. 234-6480 [1] BRACKET AS  
24. 234-6483 [1] BRACKET AS  
25. 234-6485 [1] BRACKET AS  
26. 234-6490 [1] CUP  
27. 234-6491 [1] COVER  
28. 234-6497 [1] COVER  
29. 234-6498 [3] RIVET  
30. 234-6521 [1] COVER  
31. 234-6547 [1] COVER  
32. 234-6548 [1] COVER  
33. 234-6549 [1] COVER  
34. 234-6550 [1] COVER  
35. 234-6579 [2] NUT-SPEED  
36. 235-8922 [1] COVER  
37. 235-8923 [2] CAP  
38. 235-8930 [1] LINER  
39. 235-8950 C [10] CLIP  
40. 245-7790 [2] SCREW-TAPPING  
41. 128-2135 M [13] SCREW-TRUSS HEAD (M6X1X13-MM)  
42. 128-2136 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 189-2855 [1] COVER  
44. 234-6469 [1] COVER  
45. 9X-2042 M [23] SCREW-TRUSS HEAD (M6X1X12-MM)  
46. 305-0333 C [1] BRACKET  
47. 305-0330 C [1] COVER (LOWER, RH)  
48. 8R-1803 [1] WASHER (10.5X18X1-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP48741756
 

336-1136: CAB GP

336-1136 CAB GP
S/N KGF1-UP; FAL1-UP
PART OF 336-1147 CAB GP
AN ATTACHMENT
i03321052 SEBP4874
3361136 CAB GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] CAB AS  
1A. 185-8182 M [6] BOLT (M10X1.5X20-MM)  
1B. 185-8187 [6] WASHER (10.2X22X3.2-MM THK)  
1C. 151-6777 [2] HINGE  
1D. 9X-2041 M [6] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
2. 235-8910 Y [1] CAB GP (EXTERIOR)  
3. 235-8908 Y [1] CAB GP (INTERIOR)  
4. 235-8909 JY [1] WINDOW GP-CAB (SIDE, REAR)  
5. 234-6594 Y [1] WIPER GP-WINDOW (FRONT, UPPER)  
6. 336-1137 Y [1] DOOR & MTG GP-CAB  
7. 139-7101 Y [1] WINDOW GP-CAB (FRONT, UPPER)  
8. 176-1958 Y [1] WINDOW GP-CAB (FRONT, LOWER)  
9. 139-7099 Y [1] HATCH GP-ROOF  
   
  171-7503 FJY [1] WINDOW GP-CAB (FRONT, UPPER)  
  207-0144 FJY [1] WINDOW GP-CAB (FRONT, UPPER)  
  F   NOT SHOWN
  J   ITEMS MARKED J AVAILABLE FOR SERVICE REPAIR OF WINDOW GP MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48741757
 

336-1147: CAB GP

336-1147 CAB GP
S/N KGF1-UP; FAL1-UP
AN ATTACHMENT
i03334158 SEBP4874
3361147 CAB GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-2135 M [5] SCREW-TRUSS HEAD (M6X1X13-MM)  
2. 164-8474 [2] LOUVER AS-VENT  
3. 336-1136 Y [1] CAB GP  
4. 234-6501 Y [1] COVER GP-CAB (REAR)  
5. 235-9001 [1] SUPPORT  
6. 8T-4179 M [5] BOLT (M12X1.75X20-MM)  
7. 8T-4190 M [4] BOLT (M16X2X25-MM)  
8. 8T-4223 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
10. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
11. 8Y-6967 [2] LOUVER AS-VENT  
12. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48741758
 

346-8037: CAB GP

346-8037 CAB GP
S/N KGF1-UP; FAL1-UP
PART OF 338-9908, 338-9923, 347-3340, 354-1047, 354-1054, 354-1147, 354-1148, 354-1149, 354-1150, 359-2298, 359-2299, 359-2300, 359-2404, 359-2405, 359-2421, 359-2481, 359-2482, 367-8686, 367-8697, 367-8738, 367-8739, 367-8798, 367-8799, 367-8800, 367-8807, 367-8809, 367-8810, 379-7095, 379-7096, 379-7097, 379-7098, 379-7119, 379-7218, 379-7219, 379-7220, 379-7226, 379-7227, 379-7228, 379-7268, 379-7269, 379-7270, 385-4030, 385-4031, 385-4032, 385-4033, 385-4036, 385-4136, 385-4186, 385-4187, 396-6826, 396-6827, 396-6828, 421-6034, 421-6035, 421-6038, 421-6039, 421-6040, 421-6043, 421-6046, 421-6048, 421-6049, 447-3291, 447-3292 DISTRIBUTION AR, 351-9691, 359-2264 OPTION AR-COLD WEATHER, 351-9690, 359-2263, 367-8812, 367-8814, 379-7297, 379-7298, 379-7299, 379-7300, 415-8425, 415-8426 OPTION AR-REGIONAL
AN ATTACHMENT
i03882973 SEBP4874
3468037 CAB GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-2135 M [5] SCREW-TRUSS HEAD (M6X1X13-MM)  
2. 164-8474 [2] LOUVER AS-VENT  
3. 346-8053 Y [1] CAB GP  
4. 234-6501 Y [1] COVER GP-CAB (REAR)  
5. 235-9001 [1] SUPPORT  
6. 8T-4179 M [5] BOLT (M12X1.75X20-MM)  
7. 8T-4190 M [4] BOLT (M16X2X25-MM)  
8. 8T-4223 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
10. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
11. 8Y-6967 [2] LOUVER AS-VENT  
12. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP48741759
 

346-8038: CAB GP

346-8038 CAB GP
S/N KGF1-UP; FAL1-UP
PART OF 347-3344, 347-3345, 354-1154, 354-1155 OPTION AR-CAB
AN ATTACHMENT
i03838531 SEBP4874
3468038 CAB GP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-2135 M [5] SCREW-TRUSS HEAD (M6X1X13-MM)  
2. 164-8474 [2] LOUVER AS-VENT  
3. 346-8054 Y [1] CAB GP  
4. 234-6501 Y [1] COVER GP-CAB (REAR)  
5. 235-9001 [1] SUPPORT  
6. 8T-4179 M [5] BOLT (M12X1.75X20-MM)  
7. 8T-4190 M [4] BOLT (M16X2X25-MM)  
8. 8T-4223 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
10. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
11. 8Y-6967 [2] LOUVER AS-VENT  
12. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Windows - Clean
320D Excavator
Cab Air Filter (Fresh Air) - Clean/Replace
320D Excavator
Roof Hatch
320D Excavator
Cab Visor - If Equipped
320D Excavator
Work Tool Control (One-Way Flow) - Electric Joystick (If Equipped)
320D Excavator
Operator Station
320D Excavator
Work Tool Control (Two-Way Flow) - If Equipped
320D Excavator
Work Tool Control (One-Way Flow) - If Equipped
320D Excavator
Operator Controls
320D Excavator
Rollover Protective Structure (ROPS) - Inspect
320D Excavator
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
Technical Information Bulletin
Procedure to Install Bosses for Attaching Vandal Guards on Certain Excavators with ROPS Cabs{7301, 7315, 7325}
Procedure to Install Bosses for Attaching Vandal Guards on Certain Excavators with ROPS Cabs{7301, 7315, 7325}
Specifications
Cab
320D and 323D Excavators Machine System Specifications
Cab
320D and 323D Excavators Machine System Specifications
Cab - Internal
320D and 323D Excavators Machine System Specifications
Cab - Protection Visor
320D and 323D Excavators Machine System Specifications
Cab - Window Guard
320D and 323D Excavators Machine System Specifications
Cab - Air Duct
320D and 323D Excavators Machine System Specifications
Disassembly and Assembly
Cab - Remove
320D Excavator Machine Systems
Cab - Install
320D Excavator Machine Systems
Service Magazine
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557}
2009/04/20
Correct Handling and Removal Procedure of the Console Cover {5258, 7301, 7325}
2009/02/23
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02

Caterpillar Parts SIS Catalog 320D :

CAB GP
235-8908 CAB GP
CAB GP
235-8908 CAB GP
CAB GP
229-9109 CAB GP
CAB GP
229-9108 CAB GP
CAB GP
229-9101 CAB GP
CAB GP
229-9100 CAB GP
CAB GP
229-9099 CAB GP
CAB GP
229-9098 CAB GP
CAB GP
235-8910 CAB GP
CAB GP
235-8910 CAB GP
CAB GP
235-8910 CAB GP
CAB GP
235-8917 CAB GP
CAB GP
235-8917 CAB GP
CAB GP
336-1136 CAB GP
CAB GP
336-1147 CAB GP
CAB GP
346-8037 CAB GP

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.