POWER TRAIN
AXLE GPPOWER TRAIN
AXLE GP
#SEBP48930310
331-1400: AXLE & TRANSMISSION AR
331-1400 AXLE & TRANSMISSION AR
S/N W5M1-UP
PART OF 308-2459 AXLE AR-REAR
Type 4
S/N W5M1-UP
PART OF 308-2459 AXLE AR-REAR
Type 4
For full view, you need register
Parts for your M315D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 416-1916 Y | [1] | TRANSMISSION GP (DIRECT DRIVE) | |
| 2. | 333-8043 | [2] | HOUSING-AXLE | |
| 3. | 333-8044 | [2] | SHAFT-AXLE | |
| 4. | 233-8738 | [1] | HOUSING | |
| 5. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 128-7675 B | [2] | SHIM (0.35-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 B | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 45. | 6Y-2942 | [2] | BEARING-TAPERED ROLLER | |
| 46. | 6Y-2943 | [2] | CUP-BEARING (TAPERED ROLLER) | |
| 47. | 8U-6079 | [2] | SEAL-O-RING | |
| 48. | 5W-5627 M | [32] | BOLT (M18X2.5X60-MM) | |
| 49. | 263-3629 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 203-0215 | [1] | SEAL-O-RING | ||
| 50. | 203-0215 | [1] | SEAL-O-RING | |
| 51. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| 52. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 53. | 6V-8149 M | [10] | NUT (M12X1.75-THD) | |
| 54. | 372-4119 | [1] | GEAR-CROWN | |
| 55. | 519-7018 C | [1] | CASE-DIFFERENTIAL | |
| 56. | 331-1391 | [1] | COVER | |
| 58. | 331-1393 | [2] | WASHER-THRUST | |
| 59. | 416-2319 | [2] | GEAR-DIFFERENTIAL | |
| 60. | 331-1396 | [4] | GEAR-DIFFERENTIAL | |
| 61. | 331-1397 | [4] | WASHER-THRUST | |
| 62. | 331-1398 | [1] | SHAFT | |
| 63. | 519-7019 C | [2] | SHAFT | |
| 64. | 2M-3521 C | [2] | PIN-SPRING | |
| 65. | 336-7377 M | [16] | BOLT-SOCKET HEAD (M12X1.5X35-MM) | |
| 66. | 233-8739 | [2] | HUB GP-WHEEL | |
| (EACH INCLUDES) | ||||
| 243-0378 | [1] | NUT | ||
| 67. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 68. | 8T-4140 M | [28] | BOLT (M16X2X60-MM) | |
| 69. | 8U-5927 | [2] | SEAL-O-RING | |
| 70. | 375-2548 | [2] | GEAR-SUN | |
| 71. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 72. | 121-8167 | [4] | BEARING-ROLLER | |
| 73. | 238-3298 | [2] | SLEEVE-SPACER | |
| 74. | 333-8029 | [2] | HUB-FLANGE | |
| 75. | 7X-5762 | [2] | SEAL-O-RING | |
| 76. | 263-3701 | [2] | GEAR-CARRIER | |
| 77. | 320-9728 | [4] | SEAL-O-RING | |
| 78. | 320-9731 | [2] | SEAL-O-RING | |
| 79. | 298-2314 | [2] | GEAR-INTERNAL | |
| 80. | 328-8804 | [2] | PISTON | |
| 81. | 263-4057 | [8] | DOWEL | |
| 82. | 355-2319 | [2] | SEAL | |
| 83. | 238-3303 | [2] | RING (2-MM THK) | |
| 84. | 8U-0754 | [2] | SEAL | |
| 85. | 238-3304 | [2] | RING (2-MM THK) | |
| 86. | 8U-3592 | [16] | SPRING | |
| 87. | 238-3305 | [16] | SPRING | |
| 88. | 298-2315 | [16] | BOLT-SPECIAL | |
| 89. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 90. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 91. | 238-3309 | [10] | DISC-CLUTCH (2.5-MM THK) | |
| 92. | 238-3307 B | [2] | DISC-CLUTCH (2-MM THK) | |
| 93. | 238-3308 B | [2] | DISC-CLUTCH (3-MM THK) | |
| 94. | 238-3309 B | [2] | DISC-CLUTCH (2.5-MM THK) | |
| 95. | 375-1360 | [2] | WASHER-THRUST (10X40.2X5.1-MM THK) | |
| 96. | 375-8264 | [2] | CAGE-PINION | |
| 97. | 375-1359 | [6] | GEAR-PLANETARY | |
| 99. | 110-4737 | [6] | RING-RETAINING | |
| 100. | 6V-3668 M | [4] | BOLT (M12X1.75X30-MM) | |
| 101. | 243-5336 M | [2] | BOLT (M10X1.5X20-MM) | |
| 102. | 333-8037 | [20] | STUD-WHEEL | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48930311
252-7278: AXLE AR-FRONT
252-7278 AXLE AR-FRONT -DISC BRAKE
S/N W5M1-UP
PART OF 306-5903, 333-2270, 333-2273, 333-2277, 333-2280, 333-2284, 347-2518, 352-1744, 360-3209 UNDERCARRIAGE AR
S/N W5M1-UP
PART OF 306-5903, 333-2270, 333-2273, 333-2277, 333-2280, 333-2284, 347-2518, 352-1744, 360-3209 UNDERCARRIAGE AR
For full view, you need register
Parts for your M315D WHEELED EXCAVATOR:
CATERPILLAR SIS#SEBP48930312
308-2459: AXLE AR-REAR
For full view, you need register
Parts for your M315D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1C-9934 I | [1] | HOSE AS | |
| 2. | 5W-0965 | [20] | RING | |
| 3. | 5W-1386 M | [20] | NUT (M22X1.5-THD) | |
| 4. | 8U-5923 | [2] | FITTING AS | |
| 5. | 237-4535 Y | [1] | AXLE & TRANSMISSION AR | |
| 6. | 241-6199 | [1] | ELBOW AS | |
| 6V-8398 | [1] | SEAL-O-RING | ||
| 8T-6850 | [1] | SEAL-O-RING | ||
| 241-6192 | [1] | ELBOW | ||
| 7. | 244-3269 I | [1] | HOSE AS | |
| 8. | 303-9446 | [20] | LOCKWASHER | |
| 9. | 188-2720 M | [8] | LOCKNUT (M20X2.5-THD) | |
| 10. | 4I-6766 M | [8] | BOLT (M20X2.5X230-MM) | |
| 11. | 6V-6560 | [2] | SEAL-O-RING | |
| 12. | 6V-8398 | [3] | SEAL-O-RING | |
| 13. | 8T-4123 | [16] | WASHER (22X35X3.5-MM THK) | |
| 14. | 8T-6850 | [1] | SEAL-O-RING | |
| 15. | 8T-7488 | [1] | CONNECTOR | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48930313
308-2459: AXLE AR-REAR
For full view, you need register
Parts for your M315D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1C-9934 I | [1] | HOSE AS | |
| 2. | 5W-0965 | [20] | RING | |
| 3. | 303-9445 M | [20] | NUT-HEX FLANGE (M22X1.5-THD) | |
| 4. | 8U-5923 | [2] | FITTING AS | |
| 5. | 331-1400 CY | [1] | AXLE & TRANSMISSION AR (REAR) | |
| 6. | 241-6199 | [1] | ELBOW AS | |
| 6V-8398 | [1] | SEAL-O-RING | ||
| 8T-6850 | [1] | SEAL-O-RING | ||
| 241-6192 | [1] | ELBOW | ||
| 7. | 244-3269 I | [1] | HOSE AS | |
| 8. | 303-9446 | [20] | LOCKWASHER | |
| 9. | 6V-7688 M | [8] | LOCKNUT (M20X2.5-THD) | |
| 10. | 4I-6766 M | [8] | BOLT (M20X2.5X230-MM) | |
| 11. | 6V-6560 | [2] | SEAL-O-RING | |
| 12. | 6V-8398 | [3] | SEAL-O-RING | |
| 13. | 8T-4123 | [16] | WASHER (22X35X3.5-MM THK) | |
| 14. | 8T-6850 | [1] | SEAL-O-RING | |
| 15. | 8T-7488 | [1] | CONNECTOR | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48930314
308-2460: AXLE AR-WIDE
308-2460 AXLE AR-WIDE -DISC BRAKE
S/N W5M1-UP
PART OF 333-2287, 333-2289, 347-2521, 352-1752, 360-3214 UNDERCARRIAGE AR
S/N W5M1-UP
PART OF 333-2287, 333-2289, 347-2521, 352-1752, 360-3214 UNDERCARRIAGE AR
For full view, you need register
Parts for your M315D WHEELED EXCAVATOR:
CATERPILLAR SIS#SEBP48930315
237-4520: AXLE GP-STEERING
For full view, you need register
Parts for your M315D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 233-8728 | [1] | GEAR-CROWN | |
| 2. | 290-0297 | [1] | PINION | |
| 3. | 9R-6814 B | [1] | WASHER (88X104.6X1.5-MM THK) | |
| 9R-6805 B | [1] | WASHER (88X104.6X0.9-MM THK) | ||
| 9R-6806 B | [1] | WASHER (88X104.6X0.95-MM THK) | ||
| 9R-6807 B | [1] | WASHER (88X104.6X1-MM THK) | ||
| 9R-6808 B | [1] | WASHER (88X104.6X1.05-MM THK) | ||
| 9R-6809 B | [1] | WASHER (88X104.6X1.1-MM THK) | ||
| 9R-6810 B | [1] | WASHER (88X104.6X1.15-MM THK) | ||
| 9R-6811 B | [1] | WASHER (88X104.6X1.2-MM THK) | ||
| 9R-6812 B | [1] | WASHER (88X104.6X1.25-MM THK) | ||
| 9R-6813 B | [1] | WASHER (88X104.6X1.3-MM THK) | ||
| 9R-6801 B | [1] | WASHER (88X104.6X0.7-MM THK) | ||
| 9R-6802 B | [1] | WASHER (88X104.6X0.75-MM THK) | ||
| 9R-6803 B | [1] | WASHER (88X104.6X0.8-MM THK) | ||
| 9R-6804 B | [1] | WASHER (88X104.6X0.85-MM THK) | ||
| 17. | 7T-9342 | [1] | CONE-BEARING | |
| 18. | 7T-9343 | [1] | CUP-BEARING | |
| 19. | 9R-6932 B | [1] | RING (11.3-MM THK) | |
| 9R-6933 B | [1] | RING (11.33-MM THK) | ||
| 9R-6934 B | [1] | RING (11.36-MM THK) | ||
| 9R-6935 B | [1] | RING (11.39-MM THK) | ||
| 9R-6936 B | [1] | RING (11.42-MM THK) | ||
| 9R-6937 B | [1] | RING (11.45-MM THK) | ||
| 9R-6938 B | [1] | RING (11.48-MM THK) | ||
| 9R-6939 B | [1] | RING (11.51-MM THK) | ||
| 9R-6940 B | [1] | RING (11.54-MM THK) | ||
| 9R-6941 B | [1] | RING (11.57-MM THK) | ||
| 9R-6942 B | [1] | RING (11.6-MM THK) | ||
| 9R-6943 B | [1] | RING (11.63-MM THK) | ||
| 9R-6944 B | [1] | RING (11.66-MM THK) | ||
| 9R-6945 B | [1] | RING (11.69-MM THK) | ||
| 9R-6836 B | [1] | RING (11.72-MM THK) | ||
| 9R-6837 B | [1] | RING (11.75-MM THK) | ||
| 9R-6838 B | [1] | RING (11.78-MM THK) | ||
| 9R-6839 B | [1] | RING (11.81-MM THK) | ||
| 9R-6840 B | [1] | RING (11.84-MM THK) | ||
| 9R-6841 B | [1] | RING (11.87-MM THK) | ||
| 9R-6842 B | [1] | RING (11.9-MM THK) | ||
| 9R-6843 B | [1] | RING (11.93-MM THK) | ||
| 9R-6844 B | [1] | RING (11.96-MM THK) | ||
| 9R-6845 B | [1] | RING (11.99-MM THK) | ||
| 9R-6846 B | [1] | RING (12.02-MM THK) | ||
| 9R-6847 B | [1] | RING (12.05-MM THK) | ||
| 9R-6848 B | [1] | RING (12.08-MM THK) | ||
| 9R-6849 B | [1] | RING (12.11-MM THK) | ||
| 9R-6850 B | [1] | RING (12.14-MM THK) | ||
| 9R-6924 B | [1] | RING (12.17-MM THK) | ||
| 9R-6925 B | [1] | RING (12.2-MM THK) | ||
| 9R-6926 B | [1] | RING (12.23-MM THK) | ||
| 9R-6927 B | [1] | RING (12.26-MM THK) | ||
| 9R-6928 B | [1] | RING (12.29-MM THK) | ||
| 9R-6929 B | [1] | RING (12.32-MM THK) | ||
| 9R-6930 B | [1] | RING (12.35-MM THK) | ||
| 9R-6931 B | [1] | RING (12.38-MM THK) | ||
| 8U-5669 B | [1] | SPACER (11.27-MM THK) | ||
| 8U-5670 B | [1] | SPACER (11.24-MM THK) | ||
| 8U-5671 B | [1] | SPACER (11.21-MM THK) | ||
| 8U-5672 B | [1] | SPACER (11.18-MM THK) | ||
| 8U-5673 B | [1] | SPACER (11.15-MM THK) | ||
| 128-7637 B | [1] | RING (11.12-MM THK) | ||
| 128-7638 B | [1] | RING (11.09-MM THK) | ||
| 128-7639 B | [1] | RING (11.06-MM THK) | ||
| 128-7640 B | [1] | RING (11.03-MM THK) | ||
| 128-7641 B | [1] | RING (11-MM THK) | ||
| 128-7642 B | [1] | RING (10.97-MM THK) | ||
| 128-7643 B | [1] | RING (10.94-MM THK) | ||
| 68. | 9R-7002 | [1] | BEARING-TAPERED ROLLER | |
| 69. | 229-2712 | [1] | SEAL-SHAFT | |
| 70. | 9R-6985 | [1] | WASHER (27.1X50X5-MM THK) | |
| 71. | 5W-5352 M | [1] | NUT (M27X1.5-THD) | |
| 72. | 5W-5666 | [1] | FLANGE | |
| 73. | 229-2711 | [1] | PLATE-DEFLECTOR | |
| 74. | 9R-6991 | [1] | CASE-DIFFERENTIAL | |
| 75. | 9R-6964 | [2] | GEAR-DIFFERENTIAL | |
| 76. | 6T-5749 | [2] | WASHER-THRUST | |
| 77. | 128-7855 | [4] | GEAR-PINION | |
| 78. | 9R-6994 | [4] | WASHER-THRUST | |
| 79. | 119-9288 | [2] | SHAFT | |
| 80. | 9R-6818 M | [12] | BOLT (M12X1.5X125-MM) | |
| 81. | 9R-6819 | [12] | WASHER (13X21.9X3-MM THK) | |
| 82. | 8T-2450 | [4] | PIN-SPRING | |
| 83. | 9R-6962 | [4] | PIN-CLAMPING | |
| 84. | 243-0902 | [2] | HOUSING-AXLE | |
| 85. | 243-0903 | [1] | HOUSING | |
| 86. | 220-2593 | [4] | BUSHING-SLEEVE | |
| 87. | 9R-6996 | [4] | SEAL | |
| 89. | 121-7675 | [4] | BUSHING | |
| 90. | 243-0904 Y | [2] | UNIVERSAL JOINT GP | |
| 91. | 243-0909 | [1] | TIE ROD GP (LH)(LH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6535 | [1] | JOINT AS (LH) | ||
| 92. | 243-0911 | [1] | TIE ROD GP (RH)(RH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6536 | [1] | JOINT AS (RH) | ||
| 93. | 164-5912 M | [2] | LOCKNUT (M27X1.5-THD) | |
| 94. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 128-7675 B | [2] | SHIM (0.35-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 B | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 134. | 9R-7003 | [1] | BEARING-TAPERED ROLLER | |
| 135. | 6Y-2942 | [1] | BEARING-TAPERED ROLLER | |
| 136. | 6Y-2943 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 137. | 8U-6079 | [2] | SEAL-O-RING | |
| 138. | 238-4666 M | [32] | BOLT (M18X2.5X65-MM) | |
| 139. | 5W-5531 | [32] | WASHER (19X30X3-MM THK) | |
| 140. | 263-3629 | [3] | PLUG AS | |
| 141. | 203-0215 | [4] | SEAL-O-RING | |
| 142. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| 143. | 296-3947 C | [1] | HOUSING GP-AXLE (LH) | |
| 143A. | 243-0378 | [1] | NUT | |
| 144. | 296-3948 C | [1] | HOUSING GP-AXLE (RH) | |
| 144A. | 243-0378 | [1] | NUT | |
| 146. | 4D-8648 | [4] | CUP-BEARING | |
| 147. | 6V-2652 | [4] | CONE-BEARING | |
| 148. | 243-0914 | [4] | CAP-SEALING | |
| 149. | 242-6281 | [4] | SEAL-O-RING | |
| 150. | 296-3949 BC | [2] | SHIM (0.6-MM THK) | |
| 296-3950 BC | [2] | SHIM (0.8-MM THK) | ||
| 296-3951 BC | [2] | SHIM (1-MM THK) | ||
| 296-3952 BC | [2] | SHIM (1.2-MM THK) | ||
| 156. | 296-3953 C | [2] | TRUNNION | |
| 157. | 296-3954 C | [2] | TRUNNION | |
| 158. | 296-4057 CM | [16] | BOLT (M18X2.5X35-MM) | |
| 159. | 5W-2998 C | [4] | FITTING-GREASE | |
| 161. | 243-0917 | [2] | WASHER-THRUST | |
| 162. | 243-0918 | [2] | WASHER-THRUST | |
| 163. | 110-0846 | [2] | RING-RETAINING | |
| 164. | 135-3437 | [2] | SEAL-O-RING | |
| 166. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 167. | 8U-2354 B | [2] | SHIM (6-MM THK) | |
| 5W-6405 B | [2] | SHIM (6.5-MM THK) | ||
| 5W-7644 B | [2] | SHIM (4-MM THK) | ||
| 5W-7642 B | [2] | SHIM (5-MM THK) | ||
| 5W-7641 B | [2] | SHIM (5.5-MM THK) | ||
| 5W-7643 B | [2] | SHIM (4.5-MM THK) | ||
| 128-1733 B | [2] | SHIM (2-MM THK) | ||
| 128-1734 B | [2] | SHIM (3-MM THK) | ||
| 202-8149 B | [2] | WASHER (18.5X35X14-MM THK) | ||
| 176. | 5W-2173 M | [4] | BOLT (M18X2.5X40-MM) | |
| 177. | 241-8122 M | [2] | NUT (M18X2.5-THD) | |
| 178. | 278-7551 Y | [1] | CYLINDER GP-STEERING | |
| 186. | 6V-3823 M | [5] | BOLT (M12X1.75X60-MM) | |
| 189. | 263-4057 | [8] | DOWEL | |
| 190. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 191. | 121-8167 | [4] | BEARING-ROLLER | |
| 192. | 238-3298 | [2] | SLEEVE-SPACER | |
| 193. | 263-3700 | [2] | HUB | |
| 194. | 110-4745 | [2] | SEAL-O-RING | |
| 195. | 263-3701 | [2] | GEAR-CARRIER | |
| 196. | 320-9728 | [4] | SEAL-O-RING | |
| 197. | 320-9731 | [2] | SEAL-O-RING | |
| 198. | 298-2314 C | [2] | GEAR-INTERNAL | |
| 199. | 263-3703 | [2] | PISTON | |
| 200. | 8U-2373 | [2] | SEAL | |
| 201. | 238-3303 | [2] | RING (2-MM THK) | |
| 202. | 8U-0754 | [2] | SEAL | |
| 203. | 238-3304 | [2] | RING (2-MM THK) | |
| 204. | 8U-3592 | [16] | SPRING | |
| 205. | 238-3305 | [16] | SPRING | |
| 206. | 298-2315 C | [16] | BOLT-SPECIAL | |
| 207. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 208. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 209. | 238-3307 B | [12] | DISC-CLUTCH (2-MM THK) | |
| 238-3308 B | [12] | DISC-CLUTCH (3-MM THK) | ||
| 238-3309 B | [12] | DISC-CLUTCH (2.5-MM THK) | ||
| 212. | 110-0165 B | [2] | WASHER-THRUST (1.5-MM THK) | |
| 110-0164 B | [2] | WASHER-THRUST (1.7-MM THK) | ||
| 110-0163 B | [2] | WASHER-THRUST (2-MM THK) | ||
| 110-0162 B | [2] | WASHER-THRUST (2.2-MM THK) | ||
| 110-0161 B | [2] | WASHER-THRUST (2.5-MM THK) | ||
| 110-0160 B | [2] | WASHER-THRUST (2.7-MM THK) | ||
| 110-0159 B | [2] | WASHER-THRUST (3-MM THK) | ||
| 219. | 238-3310 | [2] | HOUSING (PINION) | |
| 220. | 238-3311 | [6] | GEAR-PLANETARY | |
| 221. | 213-9783 | [6] | BEARING-ROLLER | |
| 222. | 190-8590 | [12] | RING-SNAP | |
| 223. | 190-8591 | [12] | WASHER (64.5X72.1X2-MM THK) | |
| 224. | 110-4737 | [6] | RING-RETAINING | |
| 225. | 110-2455 M | [4] | BOLT (M12X1.5X20-MM) | |
| 226. | 9R-3168 M | [2] | SCREW (M10X1.5X20-MM) | |
| 227. | 238-3312 | [20] | STUD-WHEEL | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48930316
237-4530: AXLE GP-STEERING
For full view, you need register
Parts for your M315D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 233-8728 | [1] | GEAR-CROWN | |
| 2. | 290-0297 | [1] | PINION | |
| 3. | 9R-6814 B | [1] | WASHER (88X104.6X1.5-MM THK) | |
| 9R-6805 B | [1] | WASHER (88X104.6X0.9-MM THK) | ||
| 9R-6806 B | [1] | WASHER (88X104.6X0.95-MM THK) | ||
| 9R-6807 B | [1] | WASHER (88X104.6X1-MM THK) | ||
| 9R-6808 B | [1] | WASHER (88X104.6X1.05-MM THK) | ||
| 9R-6809 B | [1] | WASHER (88X104.6X1.1-MM THK) | ||
| 9R-6810 B | [1] | WASHER (88X104.6X1.15-MM THK) | ||
| 9R-6811 B | [1] | WASHER (88X104.6X1.2-MM THK) | ||
| 9R-6812 B | [1] | WASHER (88X104.6X1.25-MM THK) | ||
| 9R-6813 B | [1] | WASHER (88X104.6X1.3-MM THK) | ||
| 9R-6801 B | [1] | WASHER (88X104.6X0.7-MM THK) | ||
| 9R-6802 B | [1] | WASHER (88X104.6X0.75-MM THK) | ||
| 9R-6803 B | [1] | WASHER (88X104.6X0.8-MM THK) | ||
| 9R-6804 B | [1] | WASHER (88X104.6X0.85-MM THK) | ||
| 17. | 7T-9342 | [1] | CONE-BEARING | |
| 18. | 7T-9343 | [1] | CUP-BEARING | |
| 19. | 9R-6932 B | [1] | RING (11.3-MM THK) | |
| 9R-6933 B | [1] | RING (11.33-MM THK) | ||
| 9R-6934 B | [1] | RING (11.36-MM THK) | ||
| 9R-6935 B | [1] | RING (11.39-MM THK) | ||
| 9R-6936 B | [1] | RING (11.42-MM THK) | ||
| 9R-6937 B | [1] | RING (11.45-MM THK) | ||
| 9R-6938 B | [1] | RING (11.48-MM THK) | ||
| 9R-6939 B | [1] | RING (11.51-MM THK) | ||
| 9R-6940 B | [1] | RING (11.54-MM THK) | ||
| 9R-6941 B | [1] | RING (11.57-MM THK) | ||
| 9R-6942 B | [1] | RING (11.6-MM THK) | ||
| 9R-6943 B | [1] | RING (11.63-MM THK) | ||
| 9R-6944 B | [1] | RING (11.66-MM THK) | ||
| 9R-6945 B | [1] | RING (11.69-MM THK) | ||
| 9R-6836 B | [1] | RING (11.72-MM THK) | ||
| 9R-6837 B | [1] | RING (11.75-MM THK) | ||
| 9R-6838 B | [1] | RING (11.78-MM THK) | ||
| 9R-6839 B | [1] | RING (11.81-MM THK) | ||
| 9R-6840 B | [1] | RING (11.84-MM THK) | ||
| 9R-6841 B | [1] | RING (11.87-MM THK) | ||
| 9R-6842 B | [1] | RING (11.9-MM THK) | ||
| 9R-6843 B | [1] | RING (11.93-MM THK) | ||
| 9R-6844 B | [1] | RING (11.96-MM THK) | ||
| 9R-6845 B | [1] | RING (11.99-MM THK) | ||
| 9R-6846 B | [1] | RING (12.02-MM THK) | ||
| 9R-6847 B | [1] | RING (12.05-MM THK) | ||
| 9R-6848 B | [1] | RING (12.08-MM THK) | ||
| 9R-6849 B | [1] | RING (12.11-MM THK) | ||
| 9R-6850 B | [1] | RING (12.14-MM THK) | ||
| 9R-6924 B | [1] | RING (12.17-MM THK) | ||
| 9R-6925 B | [1] | RING (12.2-MM THK) | ||
| 9R-6926 B | [1] | RING (12.23-MM THK) | ||
| 9R-6927 B | [1] | RING (12.26-MM THK) | ||
| 9R-6828 B | [1] | RING (0.4-MM THK) | ||
| 9R-6929 B | [1] | RING (12.32-MM THK) | ||
| 9R-6930 B | [1] | RING (12.35-MM THK) | ||
| 9R-6931 B | [1] | RING (12.38-MM THK) | ||
| 8U-5669 B | [1] | SPACER (11.27-MM THK) | ||
| 8U-5670 B | [1] | SPACER (11.24-MM THK) | ||
| 8U-5671 B | [1] | SPACER (11.21-MM THK) | ||
| 8U-5672 B | [1] | SPACER (11.18-MM THK) | ||
| 8U-5673 B | [1] | SPACER (11.15-MM THK) | ||
| 128-7637 B | [1] | RING (11.12-MM THK) | ||
| 128-7638 B | [1] | RING (11.09-MM THK) | ||
| 128-7639 B | [1] | RING (11.06-MM THK) | ||
| 128-7640 B | [1] | RING (11.03-MM THK) | ||
| 128-7641 B | [1] | RING (11-MM THK) | ||
| 128-7642 B | [1] | RING (10.97-MM THK) | ||
| 128-7643 B | [1] | RING (10.94-MM THK) | ||
| 68. | 9R-7002 | [1] | BEARING-TAPERED ROLLER | |
| 69. | 229-2712 | [1] | SEAL-SHAFT | |
| 70. | 9R-6985 | [1] | WASHER (27.1X50X5-MM THK) | |
| 71. | 5W-5352 M | [1] | NUT (M27X1.5-THD) | |
| 72. | 5W-5666 | [1] | FLANGE | |
| 73. | 229-2711 | [1] | PLATE-DEFLECTOR | |
| 74. | 9R-6991 | [1] | CASE-DIFFERENTIAL | |
| 75. | 9R-6964 | [2] | GEAR-DIFFERENTIAL | |
| 76. | 6T-5749 | [2] | WASHER-THRUST | |
| 77. | 128-7855 | [4] | GEAR-PINION | |
| 78. | 9R-6994 | [4] | WASHER-THRUST | |
| 79. | 119-9288 | [2] | SHAFT | |
| 80. | 9R-6818 M | [12] | BOLT (M12X1.5X125-MM) | |
| 81. | 9R-6819 | [12] | WASHER (13X21.9X3-MM THK) | |
| 82. | 8T-2450 | [4] | PIN-SPRING | |
| 83. | 9R-6962 | [4] | PIN-CLAMPING | |
| 84. | 243-0970 | [2] | HOUSING-AXLE | |
| 85. | 243-0903 | [1] | HOUSING | |
| 86. | 220-2593 | [4] | BUSHING-SLEEVE | |
| 87. | 9R-6996 | [4] | SEAL | |
| 89. | 121-7675 | [4] | BUSHING | |
| 90. | 243-0972 Y | [2] | UNIVERSAL JOINT GP | |
| 91. | 243-0976 | [1] | TIE ROD GP | |
| 92. | 243-0978 | [1] | TIE ROD GP | |
| (EACH TIE ROD GP INCLUDES) | ||||
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 93. | 164-5912 M | [2] | LOCKNUT (M27X1.5-THD) | |
| 94. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 128-7675 B | [2] | SHIM (0.35-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8141 B | [2] | SHIM (1.8-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 134. | 9R-7003 | [1] | BEARING-TAPERED ROLLER | |
| 135. | 6Y-2942 | [1] | BEARING-TAPERED ROLLER | |
| 136. | 6Y-2943 | [1] | CUP-BEARING (TAPERED ROLLER) | |
| 137. | 8U-6079 | [2] | SEAL-O-RING | |
| 138. | 238-4666 M | [32] | BOLT (M18X2.5X65-MM) | |
| 139. | 5W-5531 | [32] | WASHER (19X30X3-MM THK) | |
| 140. | 263-3629 | [3] | PLUG AS | |
| 141. | 203-0215 | [4] | SEAL-O-RING | |
| 142. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| 143. | 296-3947 C | [1] | HOUSING GP-AXLE | |
| 143A. | 243-0378 | [1] | NUT | |
| 144. | 296-3948 C | [1] | HOUSING GP-AXLE | |
| 144A. | 243-0378 | [1] | NUT | |
| 146. | 4D-8648 | [4] | CUP-BEARING | |
| 147. | 6V-2652 | [4] | CONE-BEARING | |
| 148. | 243-0914 | [4] | CAP-SEALING | |
| 149. | 242-6281 | [4] | SEAL-O-RING | |
| 150. | 296-3949 BC | [2] | SHIM (0.6-MM THK) | |
| 296-3950 BC | [2] | SHIM (0.8-MM THK) | ||
| 296-3951 BC | [2] | SHIM (1-MM THK) | ||
| 296-3952 BC | [2] | SHIM (1.2-MM THK) | ||
| 156. | 296-3953 C | [2] | TRUNNION | |
| 157. | 296-3954 C | [2] | TRUNNION | |
| 158. | 296-4057 CM | [16] | BOLT (M18X2.5X35-MM) | |
| 159. | 5W-2998 C | [4] | FITTING-GREASE | |
| 161. | 243-0917 | [2] | WASHER-THRUST | |
| 162. | 243-0918 | [2] | WASHER-THRUST | |
| 163. | 110-0846 | [2] | RING-RETAINING | |
| 164. | 135-3437 | [2] | SEAL-O-RING | |
| 166. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 167. | 8U-2354 B | [2] | SHIM (6-MM THK) | |
| 5W-6405 B | [2] | SHIM (6.5-MM THK) | ||
| 5W-7644 B | [2] | SHIM (4-MM THK) | ||
| 5W-7642 B | [2] | SHIM (5-MM THK) | ||
| 5W-7641 B | [2] | SHIM (5.5-MM THK) | ||
| 5W-7643 B | [2] | SHIM (4.5-MM THK) | ||
| 128-1733 B | [2] | SHIM (2-MM THK) | ||
| 128-1734 B | [2] | SHIM (3-MM THK) | ||
| 202-8149 B | [2] | WASHER (18.5X35X14-MM THK) | ||
| 176. | 5W-2173 M | [4] | BOLT (M18X2.5X40-MM) | |
| 177. | 241-8122 M | [2] | NUT (M18X2.5-THD) | |
| 182. | 278-7551 Y | [1] | CYLINDER GP-STEERING | |
| 186. | 6V-3823 M | [5] | BOLT (M12X1.75X60-MM) | |
| 189. | 263-4057 | [8] | DOWEL | |
| 190. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 191. | 121-8167 | [4] | BEARING-ROLLER | |
| 192. | 238-3298 | [2] | SLEEVE-SPACER | |
| 193. | 263-3700 | [2] | HUB | |
| 194. | 110-4745 | [2] | SEAL-O-RING | |
| 195. | 263-3701 | [2] | GEAR-CARRIER | |
| 196. | 320-9728 | [4] | SEAL-O-RING | |
| 197. | 320-9731 | [2] | SEAL-O-RING | |
| 198. | 298-2314 C | [2] | GEAR-INTERNAL | |
| 199. | 263-3703 | [2] | PISTON | |
| 200. | 8U-2373 | [2] | SEAL | |
| 201. | 238-3303 | [2] | RING (2-MM THK) | |
| 202. | 8U-0754 | [2] | SEAL | |
| 203. | 238-3304 | [2] | RING (2-MM THK) | |
| 204. | 8U-3592 | [16] | SPRING | |
| 205. | 238-3305 | [16] | SPRING | |
| 206. | 298-2315 C | [16] | BOLT-SPECIAL | |
| 207. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 208. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 209. | 238-3307 | [12] | DISC-CLUTCH (2-MM THK) | |
| 210. | 238-3308 | [12] | DISC-CLUTCH (3-MM THK) | |
| 211. | 238-3309 | [12] | DISC-CLUTCH (2.5-MM THK) | |
| 212. | 110-0165 B | [2] | WASHER-THRUST (1.5-MM THK) | |
| 110-0164 B | [2] | WASHER-THRUST (1.7-MM THK) | ||
| 110-0163 B | [2] | WASHER-THRUST (2-MM THK) | ||
| 110-0162 B | [2] | WASHER-THRUST (2.2-MM THK) | ||
| 110-0161 B | [2] | WASHER-THRUST (2.5-MM THK) | ||
| 110-0160 B | [2] | WASHER-THRUST (2.7-MM THK) | ||
| 110-0159 B | [2] | WASHER-THRUST (3-MM THK) | ||
| 219. | 238-3310 | [2] | HOUSING | |
| 220. | 238-3311 | [6] | GEAR-PLANETARY | |
| 221. | 213-9783 | [6] | BEARING-ROLLER | |
| 222. | 190-8590 | [12] | RING-SNAP | |
| 223. | 190-8591 | [12] | WASHER (64.5X72.1X2-MM THK) | |
| 224. | 110-4737 | [6] | RING-RETAINING | |
| 225. | 110-2455 M | [4] | BOLT (M12X1.5X20-MM) | |
| 226. | 9R-3168 M | [2] | SCREW (M10X1.5X20-MM) | |
| 227. | 238-3312 | [20] | STUD-WHEEL | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48930317
331-1380: AXLE GP-STEERING
For full view, you need register
Parts for your M315D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 331-1373 | [1] | GEAR-CROWN | |
| 2. | 331-1377 | [1] | PINION | |
| 3. | 110-0124 B | [1] | SHIM (2-MM THK) | |
| 110-0122 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0121 B | [1] | SHIM (1.5-MM THK) | ||
| 110-0120 B | [1] | SHIM (1.2-MM THK) | ||
| 129-9912 B | [1] | SHIM (1.9-MM THK) | ||
| 129-9913 B | [1] | SHIM (1.7-MM THK) | ||
| 129-9914 B | [1] | SHIM (1.6-MM THK) | ||
| 129-9915 B | [1] | SHIM (1.4-MM THK) | ||
| 129-9916 B | [1] | SHIM (1.3-MM THK) | ||
| 190-8567 B | [1] | SHIM (1-MM THK) | ||
| 190-8566 B | [1] | SHIM (0.9-MM THK) | ||
| 190-8565 B | [1] | SHIM (0.8-MM THK) | ||
| 190-8563 B | [1] | SHIM (0.7-MM THK) | ||
| 190-8561 B | [1] | SHIM (0.6-MM THK) | ||
| 5W-2074 B | [1] | SHIM (0.5-MM THK) | ||
| 5W-2073 B | [1] | SHIM (0.3-MM THK) | ||
| 5W-3644 B | [1] | SHIM (0.2-MM THK) | ||
| 5W-2072 B | [1] | SHIM (0.1-MM THK) | ||
| 193-1123 B | [1] | SHIM (0.75-MM THK) | ||
| 193-1124 B | [1] | SHIM (0.65-MM THK) | ||
| 331-1378 B | [1] | SHIM (1.25-MM THK) | ||
| 331-1379 B | [1] | SHIM (1.35-MM THK) | ||
| 331-1381 B | [1] | SHIM (1.45-MM THK) | ||
| 331-1382 B | [1] | SHIM (1.55-MM THK) | ||
| 331-1383 B | [1] | SHIM (1.65-MM THK) | ||
| 331-1384 B | [1] | SHIM (1.75-MM THK) | ||
| 331-1386 B | [1] | SHIM (1.85-MM THK) | ||
| 30. | 333-8048 | [1] | BEARING-TAPERED ROLLER | |
| 31. | 110-0158 B | [1] | RING (16-MM THK) | |
| 110-0157 B | [1] | RING (16.1-MM THK) | ||
| 110-0156 B | [1] | RING (16.2-MM THK) | ||
| 110-0155 B | [1] | RING (16.3-MM THK) | ||
| 110-0154 B | [1] | RING (16.4-MM THK) | ||
| 110-0153 B | [1] | RING (16.5-MM THK) | ||
| 110-0152 B | [1] | RING (16.6-MM THK) | ||
| 110-0151 B | [1] | RING (16.7-MM THK) | ||
| 110-0150 B | [1] | RING (16.8-MM THK) | ||
| 110-0146 B | [1] | RING (16.92-MM THK) | ||
| 110-0140 B | [1] | RING (17.1-MM THK) | ||
| 110-0139 B | [1] | RING (17.2-MM THK) | ||
| 110-0138 B | [1] | RING (17.3-MM THK) | ||
| 110-0137 B | [1] | RING (17.4-MM THK) | ||
| 110-0148 B | [1] | RING (16.86-MM THK) | ||
| 110-0144 B | [1] | RING (16.98-MM THK) | ||
| 110-0142 B | [1] | RING (17.04-MM THK) | ||
| 202-9635 B | [1] | RING (16.56-MM THK) | ||
| 202-9636 B | [1] | RING (16.62-MM THK) | ||
| 202-9637 B | [1] | RING (16.64-MM THK) | ||
| 202-9643 B | [1] | RING (16.68-MM THK) | ||
| 202-9644 B | [1] | RING (16.72-MM THK) | ||
| 202-9669 B | [1] | RING (16.74-MM THK) | ||
| 202-9670 B | [1] | RING (16.76-MM THK) | ||
| 202-9671 B | [1] | RING (16.78-MM THK) | ||
| 202-9673 B | [1] | RING (16.84-MM THK) | ||
| 202-9679 B | [1] | RING (16.88-MM THK) | ||
| 202-9680 B | [1] | RING (16.9-MM THK) | ||
| 202-9681 B | [1] | RING (16.94-MM THK) | ||
| 193-1454 B | [1] | RING (16.66-MM THK) | ||
| 193-1455 B | [1] | RING (16.96-MM THK) | ||
| 193-1458 B | [1] | RING (17-MM THK) | ||
| 193-1460 B | [1] | RING (17.02-MM THK) | ||
| 193-1461 B | [1] | RING (17.06-MM THK) | ||
| 193-1462 B | [1] | RING (17.08-MM THK) | ||
| 193-1463 B | [1] | RING (17.12-MM THK) | ||
| 193-1464 B | [1] | RING (17.14-MM THK) | ||
| 193-1465 B | [1] | RING (17.16-MM THK) | ||
| 193-1466 B | [1] | RING (17.18-MM THK) | ||
| 193-1467 B | [1] | RING (17.22-MM THK) | ||
| 193-1469 B | [1] | RING (17.24-MM THK) | ||
| 193-1470 B | [1] | RING (17.26-MM THK) | ||
| 193-1471 B | [1] | RING (17.28-MM THK) | ||
| 75. | 269-2407 | [1] | BEARING-ROLLER | |
| 76. | 269-2408 | [1] | SEAL-RING | |
| 77. | 8U-2506 | [1] | WASHER (30.5X55.5X6-MM THK) | |
| 78. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 79. | 331-1387 | [1] | FLANGE-DRIVE | |
| 80. | 331-1388 | [1] | PLATE-DEFLECTOR | |
| 81. | 371-7328 | [1] | CASE-DIFFERENTIAL | |
| 82. | 331-1391 | [1] | COVER | |
| 83. | 331-1392 | [2] | SHIM (15-MM THK) | |
| 84. | 331-1393 | [2] | WASHER-THRUST | |
| 85. | 331-1394 | [2] | GEAR-DIFFERENTIAL | |
| 86. | 331-1396 | [4] | GEAR-DIFFERENTIAL | |
| 87. | 331-1397 | [4] | WASHER-THRUST | |
| 88. | 331-1398 | [1] | SHAFT | |
| 89. | 331-1399 | [2] | SHAFT | |
| 90. | 204-3975 | [2] | PIN-SPRING | |
| 91. | 336-7377 M | [16] | BOLT-SOCKET HEAD (M12X1.5X35-MM) | |
| 92. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 132. | 6Y-2942 | [2] | BEARING-TAPERED ROLLER | |
| 133. | 6Y-2943 | [2] | CUP-BEARING (TAPERED ROLLER) | |
| 134. | 8U-6079 | [2] | SEAL-O-RING | |
| 135. | 5W-5627 M | [32] | BOLT (M18X2.5X60-MM) | |
| 136. | 263-3629 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 203-0215 | [1] | SEAL-O-RING | ||
| 137. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| 138. | 203-0215 | [1] | SEAL-O-RING | |
| 139. | 333-8001 | [2] | HOUSING-AXLE | |
| 140. | 331-1409 | [1] | HOUSING | |
| 141. | 220-2593 | [4] | BUSHING-SLEEVE | |
| 142. | 333-8005 | [4] | SEAL-RING | |
| 143. | 121-7675 | [4] | BUSHING | |
| 144. | 333-8009 | [2] | UNIVERSAL JOINT GP | |
| (EACH INCLUDES) | ||||
| 243-0905 | [1] | FORK | ||
| 243-0906 | [2] | SPIDER AS | ||
| (EACH INCLUDES) | ||||
| 8T-9597 | [4] | RING-RETAINING | ||
| 146. | 243-0909 | [1] | TIE ROD GP (LH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6535 | [1] | JOINT AS (LH) | ||
| 147. | 243-0911 | [1] | TIE ROD GP (RH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6536 | [1] | JOINT AS (RH) | ||
| 148. | 164-5912 M | [2] | LOCKNUT (M27X1.5-THD) | |
| 149. | 333-8016 | [1] | HOUSING GP-AXLE (LH) | |
| 149A. | 243-0378 | [1] | NUT | |
| 150. | 333-8017 | [1] | HOUSING GP-AXLE (RH) | |
| 150A. | 243-0378 | [1] | NUT | |
| 151. | 4D-8648 | [4] | CUP-BEARING | |
| 152. | 110-0858 | [4] | CAP-SEALING | |
| 153. | 110-4743 | [4] | SEAL-O-RING | |
| 154. | 333-8023 | [2] | TRUNNION | |
| 155. | 333-8024 | [2] | TRUNNION | |
| 156. | 135-3437 | [2] | SEAL-O-RING | |
| 157. | 296-4057 M | [16] | BOLT (M18X2.5X35-MM) | |
| 158. | 5W-2998 | [4] | FITTING-GREASE | |
| 160. | 243-0917 | [2] | WASHER-THRUST | |
| 161. | 243-0918 | [2] | WASHER-THRUST | |
| 162. | 110-0846 | [2] | RING-RETAINING | |
| 163. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 164. | 8U-2354 B | [2] | SHIM (6-MM THK) | |
| 5W-6405 B | [2] | SHIM (6.5-MM THK) | ||
| 5W-7644 B | [2] | SHIM (4-MM THK) | ||
| 5W-7642 B | [2] | SHIM (5-MM THK) | ||
| 5W-7641 B | [2] | SHIM (5.5-MM THK) | ||
| 5W-7643 B | [1] | SHIM (4.5-MM THK) | ||
| 128-1733 B | [2] | SHIM (2-MM THK) | ||
| 128-1734 B | [2] | SHIM (3-MM THK) | ||
| 5W-6408 B | [2] | WASHER (18.5X35X8-MM THK) | ||
| 202-8145 B | [2] | WASHER (18.5X35X9-MM THK) | ||
| 202-8149 B | [2] | WASHER (18.5X35X14-MM THK) | ||
| 175. | 5W-2173 M | [4] | BOLT (M18X2.5X40-MM) | |
| 176. | 241-8122 M | [2] | NUT (M18X2.5-THD) | |
| 177. | 278-7551 Y | [1] | CYLINDER GP-STEERING | |
| 178. | 6V-3823 M | [5] | BOLT (M12X1.75X60-MM) | |
| 179. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 180. | 121-8167 | [4] | BEARING-ROLLER | |
| 181. | 238-3298 | [2] | SLEEVE-SPACER | |
| 182. | 333-8029 | [2] | HUB-FLANGE | |
| 183. | 7X-5762 | [2] | SEAL-O-RING | |
| 184. | 263-3701 | [2] | GEAR-CARRIER | |
| 185. | 320-9728 | [4] | SEAL-O-RING | |
| 186. | 320-9731 | [2] | SEAL-O-RING | |
| 187. | 298-2314 | [2] | GEAR-INTERNAL | |
| 188. | 328-8804 | [2] | PISTON | |
| 189. | 263-4057 | [8] | DOWEL | |
| 190. | 355-2319 | [2] | SEAL | |
| 191. | 238-3303 | [2] | RING (2-MM THK) | |
| 192. | 8U-0754 | [2] | SEAL | |
| 193. | 238-3304 | [2] | RING (2-MM THK) | |
| 194. | 8U-3592 | [16] | SPRING | |
| 195. | 238-3305 | [16] | SPRING | |
| 196. | 298-2315 | [16] | BOLT-SPECIAL | |
| 197. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 198. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 199. | 238-3309 | [10] | DISC-CLUTCH (2.5-MM THK) | |
| 200. | 238-3307 B | [2] | DISC-CLUTCH (2-MM THK) | |
| 238-3308 B | [2] | DISC-CLUTCH (3-MM THK) | ||
| 238-3309 B | [2] | DISC-CLUTCH (2.5-MM THK) | ||
| 203. | 110-0161 | [2] | WASHER-THRUST (2.5-MM THK) | |
| 204. | 333-8035 | [2] | CAGE-PINION | |
| 205. | 333-8036 | [6] | GEAR-PLANETARY | |
| 206. | 333-8050 | [6] | BEARING-ROLLER | |
| 207. | 110-4737 | [6] | RING-RETAINING | |
| 208. | 6V-3668 M | [4] | BOLT (M12X1.75X30-MM) | |
| 209. | 243-5336 M | [2] | BOLT (M10X1.5X20-MM) | |
| 210. | 333-8037 | [20] | STUD-WHEEL | |
| 211. | 6V-2652 | [4] | CONE-BEARING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48930318
331-1380: AXLE GP-STEERING
For full view, you need register
Parts for your M315D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4119 | [1] | GEAR-CROWN | |
| 2. | 372-4122 | [1] | PINION | |
| 3. | 110-0124 B | [1] | SHIM (2-MM THK) | |
| 110-0122 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0121 B | [1] | SHIM (1.5-MM THK) | ||
| 110-0120 B | [1] | SHIM (1.2-MM THK) | ||
| 129-9912 B | [1] | SHIM (1.9-MM THK) | ||
| 129-9913 B | [1] | SHIM (1.7-MM THK) | ||
| 129-9914 B | [1] | SHIM (1.6-MM THK) | ||
| 129-9915 B | [1] | SHIM (1.4-MM THK) | ||
| 129-9916 B | [1] | SHIM (1.3-MM THK) | ||
| 190-8567 B | [1] | SHIM (1-MM THK) | ||
| 190-8566 B | [1] | SHIM (0.9-MM THK) | ||
| 190-8565 B | [1] | SHIM (0.8-MM THK) | ||
| 190-8563 B | [1] | SHIM (0.7-MM THK) | ||
| 190-8561 B | [1] | SHIM (0.6-MM THK) | ||
| 5W-2074 B | [1] | SHIM (0.5-MM THK) | ||
| 5W-2073 B | [1] | SHIM (0.3-MM THK) | ||
| 5W-3644 B | [1] | SHIM (0.2-MM THK) | ||
| 5W-2072 B | [1] | SHIM (0.1-MM THK) | ||
| 193-1123 B | [1] | SHIM (0.75-MM THK) | ||
| 193-1124 B | [1] | SHIM (0.65-MM THK) | ||
| 331-1378 B | [1] | SHIM (1.25-MM THK) | ||
| 331-1379 B | [1] | SHIM (1.35-MM THK) | ||
| 331-1381 B | [1] | SHIM (1.45-MM THK) | ||
| 331-1382 B | [1] | SHIM (1.55-MM THK) | ||
| 331-1383 B | [1] | SHIM (1.65-MM THK) | ||
| 331-1384 B | [1] | SHIM (1.75-MM THK) | ||
| 331-1386 B | [1] | SHIM (1.85-MM THK) | ||
| 30. | 333-8048 | [1] | BEARING-TAPERED ROLLER | |
| 31. | 110-0158 B | [1] | RING (16-MM THK) | |
| 110-0157 B | [1] | RING (16.1-MM THK) | ||
| 110-0156 B | [1] | RING (16.2-MM THK) | ||
| 110-0155 B | [1] | RING (16.3-MM THK) | ||
| 110-0154 B | [1] | RING (16.4-MM THK) | ||
| 110-0153 B | [1] | RING (16.5-MM THK) | ||
| 110-0152 B | [1] | RING (16.6-MM THK) | ||
| 110-0151 B | [1] | RING (16.7-MM THK) | ||
| 110-0150 B | [1] | RING (16.8-MM THK) | ||
| 110-0146 B | [1] | RING (16.92-MM THK) | ||
| 110-0140 B | [1] | RING (17.1-MM THK) | ||
| 110-0139 B | [1] | RING (17.2-MM THK) | ||
| 110-0138 B | [1] | RING (17.3-MM THK) | ||
| 110-0137 B | [1] | RING (17.4-MM THK) | ||
| 110-0148 B | [1] | RING (16.86-MM THK) | ||
| 110-0144 B | [1] | RING (16.98-MM THK) | ||
| 110-0142 B | [1] | RING (17.04-MM THK) | ||
| 202-9635 B | [1] | RING (16.56-MM THK) | ||
| 202-9636 B | [1] | RING (16.62-MM THK) | ||
| 202-9637 B | [1] | RING (16.64-MM THK) | ||
| 202-9643 B | [1] | RING (16.68-MM THK) | ||
| 202-9644 B | [1] | RING (16.72-MM THK) | ||
| 202-9669 B | [1] | RING (16.74-MM THK) | ||
| 202-9670 B | [1] | RING (16.76-MM THK) | ||
| 202-9671 B | [1] | RING (16.78-MM THK) | ||
| 202-9673 B | [1] | RING (16.84-MM THK) | ||
| 202-9679 B | [1] | RING (16.88-MM THK) | ||
| 202-9680 B | [1] | RING (16.9-MM THK) | ||
| 202-9681 B | [1] | RING (16.94-MM THK) | ||
| 193-1454 B | [1] | RING (16.66-MM THK) | ||
| 193-1455 B | [1] | RING (16.96-MM THK) | ||
| 193-1458 B | [1] | RING (17-MM THK) | ||
| 193-1460 B | [1] | RING (17.02-MM THK) | ||
| 193-1461 B | [1] | RING (17.06-MM THK) | ||
| 193-1462 B | [1] | RING (17.08-MM THK) | ||
| 193-1463 B | [1] | RING (17.12-MM THK) | ||
| 193-1464 B | [1] | RING (17.14-MM THK) | ||
| 193-1465 B | [1] | RING (17.16-MM THK) | ||
| 193-1466 B | [1] | RING (17.18-MM THK) | ||
| 193-1467 B | [1] | RING (17.22-MM THK) | ||
| 193-1469 B | [1] | RING (17.24-MM THK) | ||
| 193-1470 B | [1] | RING (17.26-MM THK) | ||
| 193-1471 B | [1] | RING (17.28-MM THK) | ||
| 75. | 269-2407 | [1] | BEARING-ROLLER | |
| 76. | 269-2408 | [1] | SEAL-RING | |
| 77. | 8U-2506 | [1] | WASHER (30.5X55.5X6-MM THK) | |
| 78. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 79. | 331-1387 | [1] | FLANGE-DRIVE | |
| 80. | 331-1388 | [1] | PLATE-DEFLECTOR | |
| 81. | 371-7328 | [1] | CASE-DIFFERENTIAL | |
| 82. | 331-1391 | [1] | COVER | |
| 83. | 331-1392 | [2] | SHIM (15-MM THK) | |
| 84. | 331-1393 | [2] | WASHER-THRUST | |
| 85. | 331-1394 | [2] | GEAR-DIFFERENTIAL | |
| 86. | 331-1396 | [4] | GEAR-DIFFERENTIAL | |
| 87. | 331-1397 | [4] | WASHER-THRUST | |
| 88. | 331-1398 | [1] | SHAFT | |
| 89. | 331-1399 | [2] | SHAFT | |
| 90. | 204-3975 | [2] | PIN-SPRING | |
| 91. | 336-7377 M | [16] | BOLT-SOCKET HEAD (M12X1.5X35-MM) | |
| 92. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 132. | 6Y-2942 | [2] | BEARING-TAPERED ROLLER | |
| 133. | 6Y-2943 | [2] | CUP-BEARING (TAPERED ROLLER) | |
| 134. | 8U-6079 | [2] | SEAL-O-RING | |
| 135. | 5W-5627 M | [32] | BOLT (M18X2.5X60-MM) | |
| 136. | 263-3629 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 203-0215 | [1] | SEAL-O-RING | ||
| 137. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| 138. | 203-0215 | [1] | SEAL-O-RING | |
| 139. | 333-8001 | [2] | HOUSING-AXLE | |
| 140. | 331-1409 | [1] | HOUSING | |
| 141. | 220-2593 | [4] | BUSHING-SLEEVE | |
| 142. | 333-8005 | [4] | SEAL-RING | |
| 143. | 388-2516 | [2] | BUSHING | |
| 144. | 333-8009 | [2] | UNIVERSAL JOINT GP | |
| (EACH INCLUDES) | ||||
| 243-0905 | [1] | FORK | ||
| 243-0906 | [2] | SPIDER AS | ||
| (EACH INCLUDES) | ||||
| 8T-9597 | [4] | RING-RETAINING | ||
| 146. | 243-0909 | [1] | TIE ROD GP (LH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6535 | [1] | JOINT AS (LH) | ||
| 147. | 243-0911 | [1] | TIE ROD GP (RH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6536 | [1] | JOINT AS (RH) | ||
| 148. | 164-5912 M | [2] | LOCKNUT (M27X1.5-THD) | |
| 149. | 333-8016 | [1] | HOUSING GP-AXLE (LH) | |
| 149A. | 243-0378 | [1] | NUT | |
| 150. | 333-8017 | [1] | HOUSING GP-AXLE (RH) | |
| 150A. | 243-0378 | [1] | NUT | |
| 151. | 4D-8648 | [4] | CUP-BEARING | |
| 152. | 110-0858 | [4] | CAP-SEALING | |
| 153. | 110-4743 | [4] | SEAL-O-RING | |
| 154. | 333-8023 | [2] | TRUNNION | |
| 155. | 333-8024 | [2] | TRUNNION | |
| 156. | 135-3437 | [2] | SEAL-O-RING | |
| 157. | 296-4057 M | [16] | BOLT (M18X2.5X35-MM) | |
| 158. | 5W-2998 | [4] | FITTING-GREASE | |
| 160. | 243-0917 | [2] | WASHER-THRUST | |
| 161. | 243-0918 | [2] | WASHER-THRUST | |
| 162. | 110-0846 | [2] | RING-RETAINING | |
| 163. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 164. | 8U-2354 B | [2] | SHIM (6-MM THK) | |
| 5W-6405 B | [2] | SHIM (6.5-MM THK) | ||
| 5W-7644 B | [2] | SHIM (4-MM THK) | ||
| 5W-7642 B | [2] | SHIM (5-MM THK) | ||
| 5W-7641 B | [2] | SHIM (5.5-MM THK) | ||
| 5W-7643 B | [1] | SHIM (4.5-MM THK) | ||
| 128-1733 B | [2] | SHIM (2-MM THK) | ||
| 128-1734 B | [2] | SHIM (3-MM THK) | ||
| 5W-6408 B | [2] | WASHER (18.5X35X8-MM THK) | ||
| 202-8145 B | [2] | WASHER (18.5X35X9-MM THK) | ||
| 202-8149 B | [2] | WASHER (18.5X35X14-MM THK) | ||
| 175. | 5W-2173 M | [4] | BOLT (M18X2.5X40-MM) | |
| 176. | 241-8122 M | [2] | NUT (M18X2.5-THD) | |
| 177. | 375-1285 Y | [1] | CYLINDER GP-STEERING | |
| 178. | 6V-3823 M | [5] | BOLT (M12X1.75X60-MM) | |
| 179. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 180. | 121-8167 | [4] | BEARING-ROLLER | |
| 181. | 238-3298 | [2] | SLEEVE-SPACER | |
| 182. | 333-8029 | [2] | HUB-FLANGE | |
| 183. | 7X-5762 | [2] | SEAL-O-RING | |
| 184. | 263-3701 | [2] | GEAR-CARRIER | |
| 185. | 320-9728 | [4] | SEAL-O-RING | |
| 186. | 320-9731 | [2] | SEAL-O-RING | |
| 187. | 298-2314 | [2] | GEAR-INTERNAL | |
| 188. | 328-8804 | [2] | PISTON | |
| 189. | 263-4057 | [8] | DOWEL | |
| 190. | 355-2319 | [2] | SEAL | |
| 191. | 238-3303 | [2] | RING (2-MM THK) | |
| 192. | 8U-0754 | [2] | SEAL | |
| 193. | 238-3304 | [2] | RING (2-MM THK) | |
| 194. | 8U-3592 | [16] | SPRING | |
| 195. | 238-3305 | [16] | SPRING | |
| 196. | 298-2315 | [16] | BOLT-SPECIAL | |
| 197. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 198. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 199. | 238-3309 | [10] | DISC-CLUTCH (2.5-MM THK) | |
| 200. | 238-3307 B | [2] | DISC-CLUTCH (2-MM THK) | |
| 238-3308 B | [2] | DISC-CLUTCH (3-MM THK) | ||
| 238-3309 B | [2] | DISC-CLUTCH (2.5-MM THK) | ||
| 203. | 375-1360 C | [2] | WASHER-THRUST (10X40.2X5.1-MM THK) | |
| 204. | 375-8264 C | [2] | CAGE-PINION | |
| 205. | 375-1359 | [6] | GEAR-PLANETARY | |
| 207. | 110-4737 | [6] | RING-RETAINING | |
| 208. | 6V-3668 M | [4] | BOLT (M12X1.75X30-MM) | |
| 209. | 243-5336 M | [2] | BOLT (M10X1.5X20-MM) | |
| 210. | 333-8037 | [20] | STUD-WHEEL | |
| 211. | 6V-2652 | [4] | CONE-BEARING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48930319
331-1380: AXLE GP-STEERING
For full view, you need register
Parts for your M315D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-4119 | [1] | GEAR-CROWN | |
| 2. | 372-4122 | [1] | PINION | |
| 3. | 110-0124 B | [1] | SHIM (2-MM THK) | |
| 110-0122 B | [1] | SHIM (1.8-MM THK) | ||
| 110-0121 B | [1] | SHIM (1.5-MM THK) | ||
| 110-0120 B | [1] | SHIM (1.2-MM THK) | ||
| 129-9912 B | [1] | SHIM (1.9-MM THK) | ||
| 129-9913 B | [1] | SHIM (1.7-MM THK) | ||
| 129-9914 B | [1] | SHIM (1.6-MM THK) | ||
| 129-9915 B | [1] | SHIM (1.4-MM THK) | ||
| 129-9916 B | [1] | SHIM (1.3-MM THK) | ||
| 190-8567 B | [1] | SHIM (1-MM THK) | ||
| 190-8566 B | [1] | SHIM (0.9-MM THK) | ||
| 190-8565 B | [1] | SHIM (0.8-MM THK) | ||
| 190-8563 B | [1] | SHIM (0.7-MM THK) | ||
| 190-8561 B | [1] | SHIM (0.6-MM THK) | ||
| 5W-2074 B | [1] | SHIM (0.5-MM THK) | ||
| 5W-2073 B | [1] | SHIM (0.3-MM THK) | ||
| 5W-3644 B | [1] | SHIM (0.2-MM THK) | ||
| 5W-2072 B | [1] | SHIM (0.1-MM THK) | ||
| 193-1123 B | [1] | SHIM (0.75-MM THK) | ||
| 193-1124 B | [1] | SHIM (0.65-MM THK) | ||
| 331-1378 B | [1] | SHIM (1.25-MM THK) | ||
| 331-1379 B | [1] | SHIM (1.35-MM THK) | ||
| 331-1381 B | [1] | SHIM (1.45-MM THK) | ||
| 331-1382 B | [1] | SHIM (1.55-MM THK) | ||
| 331-1383 B | [1] | SHIM (1.65-MM THK) | ||
| 331-1384 B | [1] | SHIM (1.75-MM THK) | ||
| 331-1386 B | [1] | SHIM (1.85-MM THK) | ||
| 30. | 333-8048 | [1] | BEARING-TAPERED ROLLER | |
| 31. | 110-0158 B | [1] | RING (16-MM THK) | |
| 110-0157 B | [1] | RING (16.1-MM THK) | ||
| 110-0156 B | [1] | RING (16.2-MM THK) | ||
| 110-0155 B | [1] | RING (16.3-MM THK) | ||
| 110-0154 B | [1] | RING (16.4-MM THK) | ||
| 110-0153 B | [1] | RING (16.5-MM THK) | ||
| 110-0152 B | [1] | RING (16.6-MM THK) | ||
| 110-0151 B | [1] | RING (16.7-MM THK) | ||
| 110-0150 B | [1] | RING (16.8-MM THK) | ||
| 110-0146 B | [1] | RING (16.92-MM THK) | ||
| 110-0140 B | [1] | RING (17.1-MM THK) | ||
| 110-0139 B | [1] | RING (17.2-MM THK) | ||
| 110-0138 B | [1] | RING (17.3-MM THK) | ||
| 110-0137 B | [1] | RING (17.4-MM THK) | ||
| 110-0148 B | [1] | RING (16.86-MM THK) | ||
| 110-0144 B | [1] | RING (16.98-MM THK) | ||
| 110-0142 B | [1] | RING (17.04-MM THK) | ||
| 202-9635 B | [1] | RING (16.56-MM THK) | ||
| 202-9636 B | [1] | RING (16.62-MM THK) | ||
| 202-9637 B | [1] | RING (16.64-MM THK) | ||
| 202-9643 B | [1] | RING (16.68-MM THK) | ||
| 202-9644 B | [1] | RING (16.72-MM THK) | ||
| 202-9669 B | [1] | RING (16.74-MM THK) | ||
| 202-9670 B | [1] | RING (16.76-MM THK) | ||
| 202-9671 B | [1] | RING (16.78-MM THK) | ||
| 202-9673 B | [1] | RING (16.84-MM THK) | ||
| 202-9679 B | [1] | RING (16.88-MM THK) | ||
| 202-9680 B | [1] | RING (16.9-MM THK) | ||
| 202-9681 B | [1] | RING (16.94-MM THK) | ||
| 193-1454 B | [1] | RING (16.66-MM THK) | ||
| 193-1455 B | [1] | RING (16.96-MM THK) | ||
| 193-1458 B | [1] | RING (17-MM THK) | ||
| 193-1460 B | [1] | RING (17.02-MM THK) | ||
| 473-6651 B | [1] | RING (17.06-MM THK) | ||
| 193-1462 B | [1] | RING (17.08-MM THK) | ||
| 193-1463 B | [1] | RING (17.12-MM THK) | ||
| 193-1464 B | [1] | RING (17.14-MM THK) | ||
| 193-1465 B | [1] | RING (17.16-MM THK) | ||
| 193-1466 B | [1] | RING (17.18-MM THK) | ||
| 193-1467 B | [1] | RING (17.22-MM THK) | ||
| 193-1469 B | [1] | RING (17.24-MM THK) | ||
| 193-1470 B | [1] | RING (17.26-MM THK) | ||
| 193-1471 B | [1] | RING (17.28-MM THK) | ||
| 75. | 269-2407 | [1] | BEARING-ROLLER | |
| 76. | 418-8616 | [1] | SEAL-LIP TYPE | |
| 77. | 8U-2506 | [1] | WASHER (30.5X55.5X6-MM THK) | |
| 78. | 110-0848 M | [1] | NUT (M30X1.5-THD) | |
| 79. | 417-6660 | [1] | FLANGE-DRIVE | |
| 80. | 331-1388 | [1] | PLATE-DEFLECTOR | |
| 81. | 371-7328 | [1] | CASE-DIFFERENTIAL | |
| 82. | 331-1391 | [1] | COVER | |
| 84. | 331-1393 | [2] | WASHER-THRUST | |
| 85. | 416-2319 C | [2] | GEAR-DIFFERENTIAL | |
| 86. | 331-1396 | [4] | GEAR-DIFFERENTIAL | |
| 87. | 331-1397 | [4] | WASHER-THRUST | |
| 88. | 331-1398 | [1] | SHAFT | |
| 89. | 331-1399 | [2] | SHAFT | |
| 90. | 204-3975 | [2] | PIN-SPRING | |
| 91. | 336-7377 M | [16] | BOLT-SOCKET HEAD (M12X1.5X35-MM) | |
| 92. | 054-6514 B | [2] | SHIM (0.1-MM THK) | |
| 121-7679 B | [2] | SHIM (0.15-MM THK) | ||
| 054-6513 B | [2] | SHIM (0.2-MM THK) | ||
| 121-7680 B | [2] | SHIM (0.25-MM THK) | ||
| 054-6512 B | [2] | SHIM (0.3-MM THK) | ||
| 7T-0564 B | [2] | SHIM (0.4-MM THK) | ||
| 121-7677 B | [2] | SHIM (0.45-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 121-7678 B | [2] | SHIM (0.55-MM THK) | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0563 B | [2] | SHIM (0.5-MM THK) | ||
| 128-7678 B | [2] | CYLINDER GP-LIFT | ||
| 7T-0562 B | [2] | SHIM (0.6-MM THK) | ||
| 128-7676 B | [2] | SHIM (0.65-MM THK) | ||
| 128-7677 B | [2] | SHIM (0.7-MM THK) | ||
| 128-7680 B | [2] | SHIM (0.75-MM THK) | ||
| 7T-0561 B | [2] | SHIM (0.8-MM THK) | ||
| 128-7681 B | [2] | SHIM (0.85-MM THK) | ||
| 128-7683 B | [2] | SHIM (0.9-MM THK) | ||
| 128-7684 B | [2] | SHIM (0.95-MM THK) | ||
| 7T-0560 B | [2] | SHIM (1-MM THK) | ||
| 128-7685 B | [2] | SHIM (1.05-MM THK) | ||
| 128-7686 B | [2] | SHIM (1.1-MM THK) | ||
| 128-7687 B | [2] | SHIM (1.15-MM THK) | ||
| 128-7688 B | [2] | SHIM (1.25-MM THK) | ||
| 128-7689 B | [2] | SHIM (1.3-MM THK) | ||
| 128-7690 B | [2] | SHIM (1.35-MM THK) | ||
| 7T-0558 B | [2] | SHIM (1.4-MM THK) | ||
| 128-7691 B | [2] | SHIM (1.45-MM THK) | ||
| 128-7692 B | [2] | SHIM (1.5-MM THK) | ||
| 128-7693 B | [2] | SHIM (1.55-MM THK) | ||
| 128-7694 B | [2] | SHIM (1.6-MM THK) | ||
| 128-7695 B | [2] | SHIM (1.65-MM THK) | ||
| 7T-0552 B | [2] | SHIM (2-MM THK) | ||
| 202-8137 B | [2] | SHIM (1.47-MM THK) | ||
| 202-8138 B | [2] | SHIM (1.63-MM THK) | ||
| 202-8139 B | [2] | SHIM (1.75-MM THK) | ||
| 202-8140 B | [2] | SHIM (1.7-MM THK) | ||
| 202-8142 B | [2] | SHIM (1.85-MM THK) | ||
| 202-8143 B | [2] | SHIM (1.9-MM THK) | ||
| 202-8144 B | [2] | SHIM (1.95-MM THK) | ||
| 132. | 6Y-2942 | [2] | BEARING-TAPERED ROLLER | |
| 133. | 6Y-2943 | [2] | CUP-BEARING (TAPERED ROLLER) | |
| 134. | 8U-6079 | [2] | SEAL-O-RING | |
| 135. | 5W-5627 M | [32] | BOLT (M18X2.5X60-MM) | |
| 136. | 263-3629 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 203-0215 | [1] | SEAL-O-RING | ||
| 137. | 263-3630 | [1] | PLUG AS-MAGNET (AXLE HOUSING) | |
| 138. | 203-0215 | [1] | SEAL-O-RING | |
| 139. | 333-8001 | [2] | HOUSING-AXLE | |
| 140. | 331-1409 | [1] | HOUSING | |
| 141. | 220-2593 | [4] | BUSHING-SLEEVE | |
| 142. | 333-8005 | [4] | SEAL-RING | |
| 143. | 388-2516 | [2] | BUSHING | |
| 144. | 333-8009 | [2] | UNIVERSAL JOINT GP | |
| (EACH INCLUDES) | ||||
| 271-2840 | [1] | FORK | ||
| 243-0906 | [2] | SPIDER AS | ||
| (EACH INCLUDES) | ||||
| 8T-9597 | [4] | RING-RETAINING | ||
| 146. | 243-0909 | [1] | TIE ROD GP (LH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6535 | [1] | JOINT AS (LH) | ||
| 147. | 243-0911 | [1] | TIE ROD GP (RH) | |
| 243-0910 | [1] | BALL JOINT AS | ||
| 295-6358 M | [1] | NUT (M28X1.5-THD) | ||
| 295-6536 | [1] | JOINT AS (RH) | ||
| 148. | 164-5912 M | [2] | LOCKNUT (M27X1.5-THD) | |
| 149. | 333-8016 | [1] | HOUSING GP-AXLE (LH) | |
| 149A. | 243-0378 | [1] | NUT | |
| 150. | 333-8017 | [1] | HOUSING GP-AXLE (RH) | |
| 150A. | 243-0378 | [1] | NUT (M110X2-THD) | |
| 151. | 4D-8648 | [4] | CUP-BEARING | |
| 152. | 110-0858 | [4] | CAP-SEALING | |
| 153. | 110-4743 | [4] | SEAL-O-RING | |
| 154. | 333-8023 | [2] | TRUNNION | |
| 155. | 333-8024 | [2] | TRUNNION | |
| 156. | 135-3437 | [2] | SEAL-O-RING | |
| 157. | 296-4057 M | [16] | BOLT (M18X2.5X35-MM) | |
| 158. | 5W-2998 | [4] | FITTING-GREASE | |
| 160. | 243-0917 | [2] | WASHER-THRUST | |
| 161. | 243-0918 | [2] | WASHER-THRUST | |
| 162. | 110-0846 | [2] | RING-RETAINING | |
| 163. | 5W-5682 | [2] | VALVE AS-PURGE (AXLE) | |
| 164. | 8U-2354 B | [2] | SHIM (6-MM THK) | |
| 5W-6405 B | [2] | SHIM (6.5-MM THK) | ||
| 5W-7644 B | [2] | SHIM (4-MM THK) | ||
| 5W-7642 B | [2] | SHIM (5-MM THK) | ||
| 5W-7641 B | [2] | SHIM (5.5-MM THK) | ||
| 5W-7643 B | [1] | SHIM (4.5-MM THK) | ||
| 128-1733 B | [2] | SHIM (2-MM THK) | ||
| 128-1734 B | [2] | SHIM (3-MM THK) | ||
| 5W-6408 B | [2] | WASHER (18.5X35X8-MM THK) | ||
| 202-8145 B | [2] | WASHER (18.5X35X9-MM THK) | ||
| 202-8149 B | [2] | WASHER (18.5X35X14-MM THK) | ||
| 175. | 5W-2173 M | [4] | BOLT (M18X2.5X40-MM) | |
| 176. | 241-8122 M | [2] | NUT (M18X2.5-THD) | |
| 177. | 375-1285 Y | [1] | CYLINDER GP-STEERING | |
| 178. | 6V-3823 M | [5] | BOLT (M12X1.75X60-MM) | |
| 179. | 203-5417 | [2] | SEAL-LIP TYPE | |
| 180. | 121-8167 | [4] | BEARING-ROLLER | |
| 181. | 238-3298 | [2] | SLEEVE-SPACER | |
| 182. | 333-8029 | [2] | HUB-FLANGE | |
| 183. | 7X-5762 | [2] | SEAL-O-RING | |
| 184. | 263-3701 | [2] | GEAR-CARRIER | |
| 185. | 320-9728 | [4] | SEAL-O-RING | |
| 186. | 320-9731 | [2] | SEAL-O-RING | |
| 187. | 298-2314 | [2] | GEAR-INTERNAL | |
| 188. | 328-8804 | [2] | PISTON | |
| 189. | 263-4057 | [8] | DOWEL | |
| 190. | 355-2319 | [2] | SEAL | |
| 191. | 238-3303 | [2] | RING (2-MM THK) | |
| 192. | 8U-0754 | [2] | SEAL | |
| 193. | 238-3304 | [2] | RING (2-MM THK) | |
| 194. | 8U-3592 | [16] | SPRING | |
| 195. | 238-3305 | [16] | SPRING | |
| 196. | 298-2315 | [16] | BOLT-SPECIAL | |
| 197. | 8U-3591 | [16] | SPACER (6.5X15X7-MM THK) | |
| 198. | 263-3704 | [12] | DISC-CLUTCH (4.5-MM THK) | |
| 199. | 238-3309 | [10] | DISC-CLUTCH (2.5-MM THK) | |
| 200. | 238-3307 B | [2] | DISC-CLUTCH (2-MM THK) | |
| 238-3308 B | [2] | DISC-CLUTCH (3-MM THK) | ||
| 238-3309 B | [2] | DISC-CLUTCH (2.5-MM THK) | ||
| 203. | 375-1360 | [2] | WASHER-THRUST (10X40.2X5.1-MM THK) | |
| 204. | 375-8264 | [2] | CAGE-PINION | |
| 205. | 375-1359 | [6] | GEAR-PLANETARY | |
| 207. | 110-4737 | [6] | RING-RETAINING | |
| 208. | 6V-3668 M | [4] | BOLT (M12X1.75X30-MM) | |
| 209. | 243-5336 M | [2] | BOLT (M10X1.5X20-MM) | |
| 210. | 333-8037 | [20] | STUD-WHEEL | |
| 211. | 6V-2652 | [4] | CONE-BEARING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
