252-9551 FASTENER GP-FRONT COVER S/N C7C336-UP PART OF 253-5325, 263-2004, 264-9647 ENGINE AR-COMPLETE ALSO AN ATTACHMENT 325D

Pos.	Part No	Qty	Parts name
1.	9X-2098 M	[1]	STUD-TAPERLOCK (BOLT)
2.	6V-2317 M	[12]	BOLT (M8X1.25X30-MM)
3.	8T-0100 M	[2]	BOLT (M8X1.25X60-MM)
4.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP49100121

116-4556: FASTENER GP-FRONT HOUSING

FASTENER GP-FRONT HOUSING

116-4556 FASTENER GP-FRONT HOUSING
S/N C7C336-UP
PART OF 253-5325, 263-2004, 264-9647 ENGINE AR-COMPLETE
CANNOT BE USED WITH FRONT ENGINE SUPPORT
ALSO AN ATTACHMENT

i00483857 SEBP4910

1164556 FASTENER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8336 M	[6]	BOLT (M12X1.75X70-MM)
	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART

#SEBP49100122

113-6170: FASTENER GP-LIFTING

FASTENER GP-LIFTING

113-6170 FASTENER GP-LIFTING
S/N C7C336-UP
REAR
PART OF 253-5325, 263-2004, 264-9647 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i00997369 SEBP4910

1136170 FASTENER GP-LIFTING Parts scheme

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
2.	6V-4248 M	[3]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP49100123

186-5892: FLYWHEEL GP

FLYWHEEL GP

186-5892 FLYWHEEL GP
S/N C7C336-UP
FITS 10 INCH OR 11.5 INCH OVER THE CENTER CLUTCH
PART OF 253-5325, 263-2004, 264-9647 ENGINE AR-COMPLETE
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING
CANNOT BE USED WITH FLYWHEEL STUB SHAFT
ALSO AN ATTACHMENT

i01564247 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	202-2382	[1]	FLYWHEEL AS
1A.	1W-1064	[1]	GEAR-FLYWHEEL RING (126-TEETH)
2.	6V-8197 M	[8]	BOLT (M12X1.75X40-MM)
3.	5P-8245	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	3E-3213	[1]	PIN-SPRING
	M		METRIC PART

#SEBP49100124

205-1321: GEAR GP-FRONT

GEAR GP-FRONT

205-1321 GEAR GP-FRONT
S/N C7C336-UP
PART OF 227-5946, 236-4284, 253-5324 ENGINE AR-CORE
ALSO AN ATTACHMENT

i01686025 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	113-6069	[1]	PLATE-THRUST
2.	115-4219	[1]	PLATE-RETAINING
3.	200-4495	[1]	SHAFT-IDLER
4.	205-1320	[1]	GEAR AS-IDLER (50-TEETH)
4A.	115-4072	[1]	BEARING
5.	136-4183 M	[1]	BOLT-12 POINT HEAD (M10X1.5X30-MM)
6.	6V-5843 M	[2]	BOLT (M10X1.5X45-MM)
	M		METRIC PART

#SEBP49100125

7W-8813: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

7W-8813 HOUSING GP-FLYWHEEL
S/N C7C336-UP
SAE NO. 3. PROVIDES STARTING MOTOR MOUNTING FLANGE ON RH SIDE
PART OF 253-5325, 263-2004, 264-9647 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i00417846 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-5233	[1]	HOUSING-FLYWHEEL
2.	2P-1294	[1]	PLUG-SEAL
3.	6V-5842 M	[2]	BOLT (M10X1.5X40-MM)
4.	7X-3347 M	[10]	BOLT-LOCKING (M14X2X45-MM)
5.	9S-4182	[1]	PLUG (7/16-20-THD)
6.	9S-4183 CB	[1]	PLUG (1-1/16-12-THD)(DRAIN)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP49100126

245-3260: HOUSING GP-FRONT

HOUSING GP-FRONT

245-3260 HOUSING GP-FRONT
S/N C7C336-UP
PART OF 227-5946, 236-4284, 253-5324 ENGINE AR-CORE
ALSO AN ATTACHMENT

i02297319 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	245-3259	[1]	HOUSING-FRONT
2.	6V-3918 M	[4]	BOLT (M8X1.25X50-MM)
3.	6V-5217 M	[8]	BOLT (M8X1.25X20-MM)
4.	9M-1974	[12]	WASHER-HARD (8.8X16X2-MM THK)
5.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP49100127

453-2213: KIT-CYLINDER HEAD GASKET

KIT-CYLINDER HEAD GASKET

453-2213 KIT-CYLINDER HEAD GASKET
S/N SRC1-UP; C3N1-UP
KIT CONTAINS GASKETS, SEALS AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES THE TURBO MOUNTING HARDWARE
FIELD INSTALLATION

i05743556 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Part No	Qty	Parts name
7C-7431	[1]	GASKET (TURBOCHARGER)
126-5466	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
272-1956	[6]	GASKET (EXHAUST MANIFOLD)
133-4995	[1]	GASKET AS-CYLINDER HEAD
282-2468	[1]	GASKET-CYLINDER HEAD
282-2474	[1]	GASKET-CYLINDER HEAD
136-0812	[1]	GASKET-WATER REGULATOR
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
304-4924	[1]	SEAL AS (VALVE MECHANISM BASE)
6V-9027	[1]	SEAL-O-RING
112-3540	[1]	SEAL-O-RING
214-7567	[1]	SEAL-O-RING
3J-1907	[3]	SEAL-O-RING
5P-7814	[1]	SEAL-O-RING
6V-3250	[2]	SEAL-O-RING
6V-3251	[1]	SEAL-O-RING
6V-3831	[1]	SEAL-O-RING
6V-5048	[1]	SEAL-O-RING
6V-6609	[7]	SEAL-O-RING
7F-8268	[1]	SEAL-O-RING
8H-2046	[1]	SEAL-O-RING
061-9456	[1]	SEAL-O-RING
214-7566	[7]	SEAL-O-RING
214-7568	[10]	SEAL-O-RING
228-7089	[1]	SEAL-O-RING
228-7090	[2]	SEAL-O-RING
238-5079	[2]	SEAL-O-RING
238-5080	[2]	SEAL-O-RING
238-5084	[2]	SEAL-O-RING
160-0526	[1]	SEAL-O-RING
341-0979	[1]	SEAL-O-RING
272-0388	[1]	SEAL-VALVE COVER
418-6781 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)


		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP49100128

453-2204: KIT-ENGINE GASKET

KIT-ENGINE GASKET

453-2204 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE
S/N SRC1-UP; C3N1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS
FOR USE WITH @@@@@253-5325@@@@@
FIELD INSTALLATION

i05841323 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Part No	Qty	Parts name
4Y-9652	[2]	GASKET
7W-5340	[1]	GASKET
371-3481	[1]	GASKET
166-2905	[1]	SEAL-INTEGRAL
2K-8199	[2]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
3P-1156	[2]	SEAL-O-RING
4F-9653	[1]	SEAL-O-RING
6V-5063	[2]	SEAL-O-RING
6V-6609	[1]	SEAL-O-RING
112-3540	[1]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
214-7566	[3]	SEAL-O-RING
214-7568	[2]	SEAL-O-RING
238-5081	[2]	SEAL-O-RING
228-7089	[1]	SEAL-O-RING
238-5080	[1]	SEAL-O-RING
295-5609	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP49100129

439-8620: KIT-FRONT COVER GASKET

KIT-FRONT COVER GASKET

439-8620 KIT-FRONT COVER GASKET
S/N SRC1-UP; C3N1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@263-2004@@@@@, @@@@@264-9647@@@@@
FIELD INSTALLATION

i06071304 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Part No	Qty	Parts name
4R-9999	[1]	EXCLUDER-CRANKSHAFT SEAL
166-1781	[1]	GASKET
245-7339	[1]	SEAL-CRANKSHAFT (FRONT)
135-9819	[1]	SEAL-INTEGRAL
061-9455	[1]	SEAL-O-RING
203-3940	[2]	SEAL-O-RING
227-5904	[1]	SEAL-O-RING
228-4947	[2]	SEAL-O-RING
126-1757	[2]	WASHER (10.85X19.3X1.27-MM THK)