238-1570 WIRING GP-REFUELING PUMP S/N SRC1-UP; C3N1-UP PART OF 229-1784 PUMP AR-FUEL TRANSFER Type 1 AN ATTACHMENT 325D

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 238-1570 WIRING GP-
1. 238-1570 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

2. 148-4233 DRIVE GP-F
3. 149-3577 DRIVE GP-F
4. 227-6115 DRIVE GP-F
5. 227-6116 DRIVE GP-F
6. 267-6796 DRIVE GP-F
7. 267-6877 DRIVE GP-F
8. 333-2909 DRIVE GP-F
9. 367-8289 DRIVE GP-F
0. INFORMATION

MOBILE HYD POWER UNIT 325D MOBILE HYD POWER UNIT C3N
325D L Mobile Hydraulic Power Units C3N00001-UP (MACHINE) POWERED BY C7 Engine SEBP4910 325D C3N (2006)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

259-4949 WIRING GP-MEDIUM PRESSURE

251-0430 WIRING GP-PLATFORM

238-1570 WIRING GP-REFUELING PUMP

#SEBP49100390

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N SRC1-UP; C3N1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT

i02180323 SEBP4910

2381570 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	238-1593	[1]	WIRE AS
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49100391

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N SRC1-UP; C3N1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT

i03161300 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	319-1335 C	[1]	HARNESS AS-WIRING
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328 C	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
16.	7K-1181 C	[11]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49100392

148-4233: DRIVE GP-FINAL

DRIVE GP-FINAL

148-4233 DRIVE GP-FINAL -WITH MOTOR
S/N C3N1-UP
PART OF 234-7132, 234-7133, 234-7137, 248-5903 FRAME GP-UNDERCARRIAGE
AN ATTACHMENT

i02640346 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	149-3577 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
2.	152-0921 Y	[1]	MOTOR GP-TRAVEL
3.	8T-6430 M	[2]	BOLT (M20X2.5X50-MM)

	417-3715 FM	[4]	BOLT (M24X10.9X140-MM)

			AVAILABLE REPAIR KIT(S):
	327-5313	[1]	KIT-SEAL (TRAVEL MOTOR)
	327-5316	[1]	KIT-SEAL (FINAL DRIVE)
	327-5318	[1]	KIT-DISC (FINAL DRIVE)
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49100393

149-3577: DRIVE GP-FINAL

DRIVE GP-FINAL

149-3577 DRIVE GP-FINAL -WITHOUT MOTOR
S/N C3N1-UP
PART OF 148-4233 DRIVE GP-FINAL
AN ATTACHMENT

i02640350 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Part No	Qty	Parts name
		NO BREAKDOWN OF SERVICEABLE PARTS AVAILABLE AT TIME OF PUBLICATION

		AVAILABLE REPAIR KIT(S):
327-5316 AJ	[1]	KIT-SEAL (FINAL DRIVE)
327-5318 AN	[1]	KIT-DISC (FINAL DRIVE)
		(ALSO INCLUDES SPRINGS)
A		NOT PART OF THIS GROUP
J		KIT MARKED J SERVICES PART(S) MARKED J IN GRAPHIC
N		KIT MARKED N SERVICES PART(S) MARKED N IN GRAPHIC

#SEBP49100394

227-6115: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6115 DRIVE GP-FINAL -WITH TRAVEL MOTOR
S/N SRC1-UP
PART OF 171-9410 POWER TRAIN AR

i02297547 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	227-6116 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
2.	204-2674 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP49100395

227-6116: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6116 DRIVE GP-FINAL -WITHOUT MOTOR
S/N SRC1-UP
PART OF 227-6115 DRIVE GP-FINAL

i02117254 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	094-0578 B	[1]	PLATE (8-MM THK)
3.	094-0579 B	[1]	PLATE (9-MM THK)
4.	094-0580 B	[1]	PLATE (10-MM THK)
5.	094-1528	[12]	WASHER (53X84X1-MM THK)
6.	168-8452 J	[2]	BALL BEARING
7.	169-5585 J	[1]	HOUSING
8.	169-5589	[1]	GEAR-SUN (24-TEETH)
9.	169-5590	[1]	GEAR-SUN (24-TEETH)
10.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
11.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
12.	169-5601	[3]	SHAFT-PLANETARY
13.	169-5602	[3]	SHAFT-PLANETARY
14.	171-9387	[1]	GEAR-RING (64-TEETH)
15.	191-2569	[3]	BEARING AS (CAGED ROLLER)
16.	191-2570	[6]	BEARING AS (CAGED ROLLER)
17.	191-2571	[1]	CARRIER-PLANETARY
18.	191-2676	[1]	GEAR-RING (72-TEETH)
19.	191-2683	[1]	GEAR-SUN (20-TEETH)
20.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
21.	191-2685	[3]	BEARING AS
22.	191-2686	[1]	CARRIER AS
23.	191-2689	[3]	WASHER (34X70X1-MM THK)
24.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
25.	199-4503	[1]	COVER
26.	207-1571 J	[1]	SEAL GP-DUO-CONE
26A.	214-3570	[2]	RING-TORIC
26B.	Z	[2]	SEAL-RING
27.	227-6117 J	[1]	HOUSING-MOTOR
28.	227-6118 J	[1]	RETAINER
29.	227-6119	[1]	CARRIER-PLANETARY
30.	227-6123 J	[2]	DOWEL
31.	227-6124 J	[2]	PLATE-WASHER
32.	093-1731	[2]	RING-RETAINING
33.	095-0891	[6]	PIN-SPRING
34.	096-0433	[3]	RING-RETAINING
35.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
36.	171-9298	[1]	SEAL-O-RING
37.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
38.	7M-8485	[2]	SEAL-O-RING
39.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
40.	8T-0293 JM	[4]	BOLT (M12X1.75X20-MM)
41.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
42.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
43.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	227-6125 J	[1]	KIT-HOUSING (FINAL DRIVE)
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Z		NOT SERVICED SEPARATELY

#SEBP49100396

267-6796: DRIVE GP-FINAL

DRIVE GP-FINAL

267-6796 DRIVE GP-FINAL -WITHOUT MOTOR
S/N SRC1-UP; C3N1-UP
PART OF 267-6877 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@333-2909@@@@@
ALSO AN ATTACHMENT

i03077037 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	267-6863 BJ	[1]	SHIM (0.75-MM THK)
	7Y-0752 BJ	[1]	SHIM (0.8-MM THK)
	267-6864 BJ	[1]	SHIM (0.85-MM THK)
	267-6865 BJ	[1]	SHIM (0.9-MM THK)
	267-6866 BJ	[1]	SHIM (0.95-MM THK)
	7Y-0753 BJ	[1]	SHIM (1-MM THK)
	267-6867 BJ	[1]	SHIM (1.2-MM THK)
	267-6868 BJ	[1]	SHIM (1.4-MM THK)
	7Y-0754 BJ	[1]	SHIM (1.6-MM THK)
	267-6869 BJ	[1]	SHIM (1.8-MM THK)
	267-6870 BJ	[1]	SHIM (2-MM THK)
	267-6871 BJ	[1]	SHIM (2.3-MM THK)
5.	094-0578 B	[1]	PLATE (8-MM THK)
	094-0579 B	[1]	PLATE (9-MM THK)
	094-0580 B	[1]	PLATE (10-MM THK)
8.	094-1528	[12]	WASHER (53X84X1-MM THK)
9.	114-1540 J	[4]	PIN-DOWEL
10.	168-8452 J	[2]	BALL BEARING
11.	169-5589	[1]	GEAR-SUN (24-TEETH)
12.	169-5590	[1]	GEAR-SUN (24-TEETH)
13.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
14.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
15.	169-5601	[3]	SHAFT-PLANETARY
16.	169-5602	[3]	SHAFT-PLANETARY
17.	171-9387	[1]	GEAR-RING (64-TEETH)
18.	191-2569	[3]	BEARING AS (CAGED ROLLER)
19.	191-2570	[6]	BEARING AS (CAGED ROLLER)
20.	191-2571	[1]	CARRIER-PLANETARY
21.	191-2676	[1]	GEAR-RING (72-TEETH)
22.	191-2683	[1]	GEAR-SUN (20-TEETH)
23.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
24.	191-2685	[3]	BEARING AS
25.	191-2686	[1]	CARRIER AS
	191-2687	[3]	RACE-BEARING
26.	191-2689	[3]	WASHER (34X70X1-MM THK)
27.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
28.	199-4503	[1]	COVER
29.	207-1571 J	[1]	SEAL GP-DUO-CONE
	214-3570	[2]	RING-TORIC
30.	267-6797 J	[1]	HOUSING-MOTOR
31.	267-6798 J	[1]	HOUSING
32.	267-6799	[1]	CARRIER-PLANETARY
33.	267-6800 J	[1]	GEAR-COUPLING
43.	093-1731	[2]	RING-RETAINING
44.	095-0891	[6]	PIN-SPRING
45.	096-0433	[3]	RING-RETAINING
46.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
47.	171-9298	[1]	SEAL-O-RING
48.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
49.	7M-8485	[2]	SEAL-O-RING
50.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
51.	7Y-5217 JM	[16]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
52.	8T-3282 J	[16]	WASHER-HARD (22X35X3.5-MM THK)
53.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
54.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
55.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	267-6818 J	[1]	KIT-FINAL DRIVE BEARING
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP49100397

267-6877: DRIVE GP-FINAL

DRIVE GP-FINAL

267-6877 DRIVE GP-FINAL -WITH MOTOR
S/N SRC1-UP; C3N1-UP
PART OF 338-7337 FRAME AR-UNDERCARRIAGE, 171-9410 POWER TRAIN AR
ALSO AN ATTACHMENT

i03077012 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	204-2674 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	267-6796 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP49100398

333-2909: DRIVE GP-FINAL

DRIVE GP-FINAL

333-2909 DRIVE GP-FINAL -WITHOUT MOTOR
S/N SRC1-UP; C3N1-UP
PART OF 367-8289 DRIVE GP-FINAL
FIELD REPLACEMENT FOR @@@@@267-6796@@@@@
AN ATTACHMENT

i04308621 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
2.	267-6863 B	[1]	SHIM (0.75-MM THK)
	7Y-0752 B	[1]	SHIM (0.8-MM THK)
	267-6864 B	[1]	SHIM (0.85-MM THK)
	267-6865 B	[1]	SHIM (0.9-MM THK)
	267-6866 B	[1]	SHIM (0.95-MM THK)
	7Y-0753 B	[1]	SHIM (1-MM THK)
	267-6867 B	[1]	SHIM (1.2-MM THK)
	267-6868 B	[1]	SHIM (1.4-MM THK)
	7Y-0754 B	[1]	SHIM (1.6-MM THK)
	267-6869 B	[1]	SHIM (1.8-MM THK)
	267-6870 B	[1]	SHIM (2-MM THK)
	267-6871 B	[1]	SHIM (2.3-MM THK)
3.	191-2690	[3]	WASHER (42.3X70X1-MM THK)
5.	094-0578 B	[1]	PLATE (8-MM THK)
6.	094-0579 B	[1]	PLATE (9-MM THK)
7.	094-0580 B	[1]	PLATE (10-MM THK)
8.	094-1528	[12]	WASHER (53X84X1-MM THK)
9.	114-1540	[4]	PIN-DOWEL
10.	333-2914	[2]	BALL BEARING
11.	169-5589	[1]	GEAR-SUN (24-TEETH)
12.	169-5590	[1]	GEAR-SUN (24-TEETH)
13.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
14.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
15.	171-9387	[1]	GEAR-RING (64-TEETH)
16.	169-5601	[3]	SHAFT-PLANETARY
17.	169-5602	[3]	SHAFT-PLANETARY
18.	191-2689	[3]	WASHER (34X70X1-MM THK)
19.	333-2916	[3]	BEARING AS
20.	333-2917	[6]	BEARING AS
21.	191-2571	[1]	CARRIER-PLANETARY
22.	191-2683	[1]	GEAR-SUN (20-TEETH)
23.	191-2684	[3]	GEAR-PLANETARY (21-TEETH)
24.	191-2676	[1]	GEAR-RING (72-TEETH)
25.	296-6248	[3]	BEARING AS-ROLLER
26.	191-2686	[1]	CARRIER AS
27.	199-4503	[1]	COVER
28.	207-1571	[1]	SEAL GP-DUO-CONE
	214-3570	[2]	RING-TORIC
29.	267-6797	[1]	HOUSING-MOTOR
30.	267-6799	[1]	CARRIER-PLANETARY
31.	267-6800	[1]	GEAR-COUPLING
41.	267-6798	[1]	HOUSING
42.	093-1731	[2]	RING-RETAINING
43.	095-0891	[6]	PIN-SPRING
44.	096-0433	[3]	RING-RETAINING
45.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
46.	171-9298	[1]	SEAL-O-RING
47.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
48.	7M-8485	[2]	SEAL-O-RING
49.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
50.	7Y-5217 M	[16]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
51.	8T-3282	[16]	WASHER-HARD (22X35X3.5-MM THK)
52.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
53.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
54.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP49100399

367-8289: DRIVE GP-FINAL

DRIVE GP-FINAL

367-8289 DRIVE GP-FINAL -WITH MOTOR
S/N C3N1-UP
PART OF 338-7337 FRAME AR-UNDERCARRIAGE
AN ATTACHMENT

i04825012 SEBP4910

For full view, you need register

Parts for your 325D MOBILE HYD POWER UNIT:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	204-2674 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	333-2909 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Engine Start Switch
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Battery or Battery Cable - Inspect/Replace
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Battery - Recycle
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Fuses - Replace
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Installation of the 251-0437 Auxiliary Control Wiring Gp {1408}
Installation of the 251-0437 Auxiliary Control Wiring Gp {1408}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}
Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE WIPER CONTROL ON VARIOUS 312C, 312D, 315C, 315D, 318C, 319C, 319D, 320C, 322C, 323D, 324D, 325C, 325D, 330C, 330D, 345C, 345D, 365C, AND 385C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WIPER CONTROL ON VARIOUS 312C, 312D, 315C, 315D, 318C, 319C, 319D, 320C, 322C, 323D, 324D, 325C, 325D, 330C, 330D, 345C, 345D, 365C, AND 385C EXCAVATORS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Specifications

Wiring (Battery)
325D MHPU Mobile Hydraulic Power Unit Machine System Specifications

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Systems Operation

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Testing and Adjusting

Electric Starting System - Test
C7 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

An Improved Radio Power Converter is used on Excavators. {1408, 1421, 7338}
2009/04/20

An Improved Wiper Control Gp is Now Used {1408, 7301}
2008/08/25

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/08/10

A New Harness Assembly for the Right Hand Console is Now Available {1408}
2011/04/04

The Connector for the Chassis Harness and the Platform Harness Should Be Tightened to the Specified Torque on Certain Excavators {1408}
2009/08/03

Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
2010/04/22

An Updated Power Converter is Now Used for Certain D Series Excavators {1421}
2010/08/23