330D L Mobile Hydraulic Power Unit D3D00001-UP (MACHINE) POWERED BY C9 Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS

MOBILE HYD POWER UNIT 330D MOBILE HYD POWER UNIT D3D
330D L Mobile Hydraulic Power Unit D3D00001-UP (MACHINE) POWERED BY C9 Engine SEBP4911 330D D3D (2006)

Parts group 330D:

For full view, you need register

ELECTRICAL AND STARTING SYSTEM

ALARM GP

132-1829 ALARM GP

132-1829 ALARM GP -ACTION
S/N D3D1-UP
24-VOLT
PART OF 251-0432 WIRING GP-CAB

231-1771 ALARM GP-TRAVEL

231-1771 ALARM GP-TRAVEL -BACKUP
S/N D3D1-UP
PART OF 278-9521, 282-2557, 287-3112, 287-7818, 288-1714, 290-4710, 290-9744, 291-4233, 291-4301, 324-8779, 329-8863, 335-8411, 350-3666 OEM AR-MOBILE HYD POWER UNIT

ALTERNATOR GP-CHARGING

177-6972 ALTERNATOR GP-CHARGING

177-6972 ALTERNATOR GP-CHARGING
S/N THY1-UP
24-VOLT, 65-AMPERE
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

185-5294 ALTERNATOR GP-CHARGING

185-5294 ALTERNATOR GP-CHARGING
S/N THY1-UP
24-VOLT, 65-AMPERE
PART OF 177-6972, 376-7735 ALTERNATOR GP-CHARGING

376-7735 ALTERNATOR GP-CHARGING

376-7735 ALTERNATOR GP-CHARGING
S/N THY1-UP
PART OF 224-9843 ENGINE AR

BATTERY GP

251-0618 BATTERY & WIRING GP

251-0618 BATTERY & WIRING GP
S/N D3D1-UP
PART OF 278-9511 CHASSIS AR
Type 1

251-0618 BATTERY & WIRING GP

251-0618 BATTERY & WIRING GP
S/N D3D1-UP
PART OF 278-9511 CHASSIS AR
Type 2

251-0618 BATTERY & WIRING GP

251-0618 BATTERY & WIRING GP
S/N D3D1-UP
PART OF 278-9511 CHASSIS AR
Type 3

251-0620 BATTERY & WIRING GP

251-0620 BATTERY & WIRING GP -COLD WEATHER
S/N D3D1-UP
PART OF 275-3748, 314-3587 STARTING AR-COLD WEATHER

306-8527 BATTERY & WIRING GP

306-8527 BATTERY & WIRING GP
S/N D3D378-UP
PART OF 278-9511 CHASSIS AR

306-8527 BATTERY & WIRING GP

306-8527 BATTERY & WIRING GP
S/N D3D1-377
PART OF 278-9511 CHASSIS AR

CONTROL GP-ELECTRONIC

346-8033 MOUNTING GP-CONTROL

346-8033 MOUNTING GP-CONTROL -WIPER, WASHER
S/N D3D1-UP
PART OF 343-1195 WIPER AR-WINDOW

ELECTRONICS GP-ENGINE

253-4522 CONTROL & MTG GP-ENGINE ELEK

253-4522 CONTROL & MTG GP-ENGINE ELEK
S/N THY1-UP
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

ELECTRONICS GP-MACHINE

221-8872 CONTROL & MTG GP-MACHINE

221-8872 CONTROL & MTG GP-MACHINE
S/N D3D1-UP
PART OF 229-9072 OPERATOR AR

260-2053 ELECTRONICS GP-MACHINE

260-2053 ELECTRONICS GP-MACHINE -HIGH POWER
S/N D3D1-UP
PART OF 278-9510 SPECIAL AR-OEM

297-4429 ELECTRONICS GP-MACHINE

297-4429 ELECTRONICS GP-MACHINE -HIGH POWER
S/N D3D1-UP
PART OF 278-9510 SPECIAL AR-OEM

LIGHTING GP

153-2521 LAMP GP-FLOOD

153-2521 LAMP GP-FLOOD
S/N D3D1-UP
24-VOLT
PART OF 238-1584 LIGHTING GP-FLOOD

153-2522 LAMP GP-FLOOD

153-2522 LAMP GP-FLOOD
S/N D3D1-UP
24-VOLT
FIELD REPLACEMENT FOR @@@@@153-2523@@@@@

153-2523 LAMP GP-FLOOD

153-2523 LAMP GP-FLOOD
S/N D3D1-UP
24-VOLT
PART OF 4I-5409 LIGHTING GP-FLOOD
FIELD REPLACEMENT ORDER @@@@@153-2522@@@@@

167-3441 LAMP GP-FLOOD

167-3441 LAMP GP-FLOOD
S/N D3D1-UP
24-VOLT
PART OF 252-1241, 252-1242 LIGHTING GP-FLOOD

339-3505 LAMP GP-FLOOD

339-3505 LAMP GP-FLOOD
S/N D3D1-UP
24-VOLT
PART OF 484-8798 KIT-OVERHEAD GUARD

238-1584 LIGHTING GP-FLOOD

238-1584 LIGHTING GP-FLOOD -BOOM
S/N D3D1-UP
PART OF 302-7339 BOOM AR-1 PIECE LONG

252-1241 LIGHTING GP-FLOOD

252-1241 LIGHTING GP-FLOOD -CAB
S/N D3D1-UP
PART OF 249-7107 PARTS AR-CAB

252-1242 LIGHTING GP-FLOOD

252-1242 LIGHTING GP-FLOOD -CAB GUARD
S/N D3D1-UP
PART OF 249-7109, 250-0712 GUARD AR-OVERHEAD

336-6072 LIGHTING GP-FLOOD

336-6072 LIGHTING GP-FLOOD -CAB GUARD
S/N D3D1-UP
PART OF 347-0297 INSTALLATION AR-CAB
FOR USE WITH FALLING OBJECT GUARD, MESH GUARD

4I-5409 LIGHTING GP-FLOOD

4I-5409 LIGHTING GP-FLOOD -CHASSIS
S/N D3D1-UP
PART OF 278-9511 CHASSIS AR

PANEL GP-CIRCUIT BREAKER

238-1432 PANEL & MTG GP-CIRCUIT BREAKER

238-1432 PANEL & MTG GP-CIRCUIT BREAKER
S/N D3D1-UP
PART OF 229-9072 OPERATOR AR

231-1756 PANEL GP-CIRCUIT BREAKER

231-1756 PANEL GP-CIRCUIT BREAKER
S/N D3D1-UP
PART OF 238-1432 PANEL & MTG GP-CIRCUIT BREAKER

SENSOR GP

231-1978 SENSOR GP-ENGINE

231-1978 SENSOR GP-ENGINE
S/N THY1-7204
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

330-6034 SENSOR GP-ENGINE

330-6034 SENSOR GP-ENGINE
S/N THY1-UP
PART OF 253-5330 ENGINE AR-COMPLETE, 384-3426, 384-3440 ENGINE AR-CORE

178-2345 SENSOR GP-LIQUID LEVEL

178-2345 SENSOR GP-LIQUID LEVEL -WATER IN FUEL
S/N D3D1-UP
PART OF 233-1124 SENSOR GP-LIQUID LEVEL

233-1124 SENSOR GP-LIQUID LEVEL

233-1124 SENSOR GP-LIQUID LEVEL -WATER SEPARATOR
S/N D3D1-UP
PART OF 278-9511 CHASSIS AR

194-6725 SENSOR GP-PRESSURE

194-6725 SENSOR GP-PRESSURE
S/N D3D1-UP
PART OF 239-2396 SENSOR GP-PRESSURE

197-8393 SENSOR GP-PRESSURE

197-8393 SENSOR GP-PRESSURE
S/N THY1-UP
PART OF 231-1978 SENSOR GP-ENGINE

224-4536 SENSOR GP-PRESSURE

224-4536 SENSOR GP-PRESSURE
S/N THY1-UP
PART OF 236-6220 SENSOR GP-PRESSURE

236-6220 SENSOR GP-PRESSURE

236-6220 SENSOR GP-PRESSURE
S/N THY1-UP
PART OF 231-1978 SENSOR GP-ENGINE

239-2396 SENSOR GP-PRESSURE

239-2396 SENSOR GP-PRESSURE -FUEL
S/N D3D1-UP
PART OF 237-8752 LINES GP-FUEL

267-1402 SENSOR GP-PRESSURE

267-1402 SENSOR GP-PRESSURE
S/N THY7205-UP
AMPSEAL CONNECTOR
PART OF 330-6034 SENSOR GP-ENGINE

303-3357 SENSOR GP-PRESSURE

303-3357 SENSOR GP-PRESSURE
S/N THY7205-UP
PART OF 330-6034 SENSOR GP-ENGINE

366-9311 SENSOR GP-PRESSURE

366-9311 SENSOR GP-PRESSURE
S/N D3D1-UP
PART OF 245-5080 LINES GP-SENSOR

236-6221 SENSOR GP-SPEED

236-6221 SENSOR GP-SPEED -ENGINE TIMING
S/N THY1-UP
PART OF 231-1978, 330-6034 SENSOR GP-ENGINE

242-9982 SENSOR GP-SPEED

242-9982 SENSOR GP-SPEED
S/N THY1-UP
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

4P-5820 SENSOR GP-SPEED

4P-5820 SENSOR GP-SPEED
S/N THY1-UP
PART OF 242-9982 SENSOR GP-SPEED

197-8391 SENSOR GP-TEMPERATURE

197-8391 SENSOR GP-TEMPERATURE -FUEL
S/N D3D1-UP
PART OF 237-8752 LINES GP-FUEL

197-8391 SENSOR GP-TEMPERATURE

197-8391 SENSOR GP-TEMPERATURE -FUEL
S/N D3D1-UP
PART OF 237-8752 LINES GP-FUEL

234-5012 SENSOR GP-TEMPERATURE

234-5012 SENSOR GP-TEMPERATURE
S/N THY7205-UP
AMPSEAL CONNECTOR
PART OF 330-6034 SENSOR GP-ENGINE

234-5013 SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE
S/N THY7205-UP
PART OF 330-6034 SENSOR GP-ENGINE

274-7395 SENSOR GP-TEMPERATURE

274-7395 SENSOR GP-TEMPERATURE
S/N THY1-UP
PART OF 231-1978 SENSOR GP-ENGINE

274-7396 SENSOR GP-TEMPERATURE

274-7396 SENSOR GP-TEMPERATURE
S/N THY1-UP
PART OF 231-1978 SENSOR GP-ENGINE

245-5080 LINES GP-SENSOR

245-5080 LINES GP-SENSOR -OVERLOAD WARNING DEVICE
S/N D3D1-UP
PART OF 288-1715 CONTROL AR-BOOM

245-5080 LINES GP-SENSOR

245-5080 LINES GP-SENSOR -OVERLOAD WARNING DEVICE
S/N D3D1-UP
PART OF 288-1715 CONTROL AR-BOOM

STARTING AID GP

238-3215 STARTING AID GP

238-3215 STARTING AID GP -AIR INLET HEATER
S/N THY1-UP
24-VOLT, 2000-WATT. LH SIDE OF ENGINE BETWEEN HEAD AND AIR INLET ELBOW
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE
Type 1

238-3215 STARTING AID GP

238-3215 STARTING AID GP -AIR INLET HEATER
S/N THY1-UP
24-VOLT, 2000-WATT. LH SIDE OF ENGINE BETWEEN HEAD AND AIR INLET ELBOW
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE
Type 2

239-6677 STARTING AID GP-ETHER

239-6677 STARTING AID GP-ETHER
S/N D3D1-UP
PART OF 275-3748 STARTING AR-COLD WEATHER
Type 1

239-6677 STARTING AID GP-ETHER

239-6677 STARTING AID GP-ETHER
S/N D3D1-UP
PART OF 275-3748, 314-3587 STARTING AR-COLD WEATHER
Type 2

239-1134 VALVE GP-ETHER STARTING

239-1134 VALVE GP-ETHER STARTING
S/N D3D1-UP
24-VOLT
PART OF 239-6677 STARTING AID GP-ETHER

STARTING AR

275-3748 STARTING AR-COLD WEATHER

275-3748 STARTING AR-COLD WEATHER
S/N D3D1-UP
PART OF 288-1714, 314-5052 OEM AR-MOBILE HYD POWER UNIT
REPLACED BY @@@@@314-3587@@@@@

314-3587 STARTING AR-COLD WEATHER

314-3587 STARTING AR-COLD WEATHER
S/N D3D1-UP
PART OF 288-1714, 314-5052 OEM AR-MOBILE HYD POWER UNIT

STARTING MOTOR GP

3T-9525 PLATE AS-BRUSH

3T-9525 PLATE AS-BRUSH
PART OF 338-3454 STARTING MOTOR GP-ELECTRIC

180-2435 STARTING MOTOR GP-ELECTRIC

180-2435 STARTING MOTOR GP-ELECTRIC
S/N D3D1-UP; THY5418-UP
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE, 275-3748 STARTING AR-COLD WEATHER

197-0986 STARTING MOTOR GP-ELECTRIC

197-0986 STARTING MOTOR GP-ELECTRIC
S/N THY1-5574
24 VOLT
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

207-1556 STARTING MOTOR GP-ELECTRIC

207-1556 STARTING MOTOR GP-ELECTRIC
S/N THY1-UP
24-VOLT
PART OF 197-0986 STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC
S/N D3D1-UP; THY5418-UP
24-VOLT
PART OF 180-2435 STARTING MOTOR GP-ELECTRIC

SWITCH GP

547-7976 SWITCH & WIRE GP-FUEL LEVEL

547-7976 SWITCH & WIRE GP-FUEL LEVEL
S/N D3D1-UP
FUEL LEVEL SWITCH KIT
PART OF 5C-6108 SWITCH GP-REFUELING

7N-0719 SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N D3D1-UP
PART OF 231-1756 PANEL GP-CIRCUIT BREAKER

125-1302 SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC -START RELAY
S/N D3D1-UP
24-VOLT
PART OF 231-1756 PANEL GP-CIRCUIT BREAKER

398-0940 SWITCH GP-MAGNETIC

398-0940 SWITCH GP-MAGNETIC
S/N THY1-UP
PART OF 269-3410 WIRING GP-HEATER

258-0883 SWITCH GP-PRESSURE

258-0883 SWITCH GP-PRESSURE -FUEL
S/N D3D1-UP
PART OF 237-8752 LINES GP-FUEL

238-1594 SWITCH GP-PUSH BUTTON

238-1594 SWITCH GP-PUSH BUTTON -REFUELING PUMP, START
S/N D3D1-UP
PART OF 238-1570 WIRING GP-REFUELING PUMP

238-1596 SWITCH GP-PUSH BUTTON

238-1596 SWITCH GP-PUSH BUTTON -REFUELING PUMP, STOP
S/N D3D1-UP
PART OF 238-1570 WIRING GP-REFUELING PUMP

5C-6108 SWITCH GP-REFUELING

5C-6108 SWITCH GP-REFUELING -FUEL TANK SHUTOFF
S/N D3D1-UP
PART OF 229-1785 PUMP GP-REFUELING

106-0107 SWITCH GP-ROTARY

106-0107 SWITCH GP-ROTARY -THROTTLE POSITION
S/N D3D1-UP
PART OF 251-0542 PANEL GP-SWITCH

319-4420 SWITCH GP-ROTARY

319-4420 SWITCH GP-ROTARY -THROTTLE POSITION
S/N D3D1-UP
PART OF 251-0542 PANEL GP-SWITCH

255-2751 SWITCH GP-START

255-2751 SWITCH GP-START -ENGINE, KEY
S/N D3D1-UP
PART OF 251-0542 PANEL GP-SWITCH

9G-7641 SWITCH GP-START

9G-7641 SWITCH GP-START -ENGINE, KEY
S/N D3D1-UP
PART OF 251-0542 PANEL GP-SWITCH

252-1225 SWITCH GP-WIPER

252-1225 SWITCH GP-WIPER
S/N D3D1-UP
PART OF 249-7112 WINDOW GP-CAB

WIRING GP

251-0618 BATTERY & WIRING GP

251-0618 BATTERY & WIRING GP
S/N D3D1-UP
PART OF 278-9511 CHASSIS AR
Type 1

251-0618 BATTERY & WIRING GP

251-0618 BATTERY & WIRING GP
S/N D3D1-UP
PART OF 278-9511 CHASSIS AR
Type 2

251-0618 BATTERY & WIRING GP

251-0618 BATTERY & WIRING GP
S/N D3D1-UP
PART OF 278-9511 CHASSIS AR
Type 3

251-0620 BATTERY & WIRING GP

251-0620 BATTERY & WIRING GP -COLD WEATHER
S/N D3D1-UP
PART OF 275-3748, 314-3587 STARTING AR-COLD WEATHER

306-8527 BATTERY & WIRING GP

306-8527 BATTERY & WIRING GP
S/N D3D378-UP
PART OF 278-9511 CHASSIS AR

306-8527 BATTERY & WIRING GP

306-8527 BATTERY & WIRING GP
S/N D3D1-377
PART OF 278-9511 CHASSIS AR

251-0526 FASTENER GP-WIRING HARNESS

251-0526 FASTENER GP-WIRING HARNESS -STRAIGHT TRAVEL
S/N D3D1-UP
PART OF 259-7176 PEDAL AR-AUXILIARY, 289-2191 PEDAL AR-THIRD

259-5237 FASTENER GP-WIRING HARNESS

259-5237 FASTENER GP-WIRING HARNESS -HEAVY LIFT
S/N D3D1-UP
PART OF 278-9513 HYDRAULIC AR

259-5293 FASTENER GP-WIRING HARNESS

259-5293 FASTENER GP-WIRING HARNESS -PEDAL CONTROL
S/N D3D1-UP
PART OF 255-5845 PEDAL AR-AUXILIARY

259-5295 FASTENER GP-WIRING HARNESS

259-5295 FASTENER GP-WIRING HARNESS -JOYSTICK
S/N D3D1-UP
PART OF 270-5688 CONTROL & MTG GP-JOYSTICK, 270-5687 CONTROL AR-AUXILIARY

235-8200 PLUG GP-CONNECTOR

235-8200 PLUG GP-CONNECTOR -ENGINE HARNESS, PROTECTIVE COVER
S/N THY1-UP
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

547-7976 SWITCH & WIRE GP-FUEL LEVEL

547-7976 SWITCH & WIRE GP-FUEL LEVEL
S/N D3D1-UP
FUEL LEVEL SWITCH KIT
PART OF 5C-6108 SWITCH GP-REFUELING

251-0623 WIRING GP-AUXILIARY CONTROL

251-0623 WIRING GP-AUXILIARY CONTROL -COMBINED FUNCTION, MEDIUM PRESSURE
S/N D3D1-UP
PART OF 297-0494 CONTROL AR-AUXILIARY

251-0619 WIRING GP-BOOM FLOAT

251-0619 WIRING GP-BOOM FLOAT
S/N D3D1-UP
PART OF 288-1715 CONTROL AR-BOOM

251-0432 WIRING GP-CAB

251-0432 WIRING GP-CAB
S/N D3D1-UP
PART OF 229-9072 OPERATOR AR

251-0432 WIRING GP-CAB

251-0432 WIRING GP-CAB
S/N D3D1-UP
PART OF 229-9072 OPERATOR AR

251-0613 WIRING GP-CAB

251-0613 WIRING GP-CAB -BOOM FLOAT
S/N D3D1-UP
PART OF 288-1715 CONTROL AR-BOOM

328-0048 WIRING GP-CAB

328-0048 WIRING GP-CAB -REAR VIEW DISPLAY
S/N D3D1-UP
PART OF 329-6574 CAMERA AR

328-0093 WIRING GP-CAB

328-0093 WIRING GP-CAB -BOOM FLOAT
S/N D3D1-UP
PART OF 288-1715 CONTROL AR-BOOM

336-6159 WIRING GP-CAB

336-6159 WIRING GP-CAB -WORK AREA VISUAL SYSTEM, REAR
S/N D3D1-UP
PART OF 340-3773 CAMERA AR

306-8721 WIRING GP-CAMERA

306-8721 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N D3D1-UP
PART OF 329-6574 CAMERA AR

342-3015 WIRING GP-CAMERA

342-3015 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N D3D1-UP
PART OF 340-3773 CAMERA AR

267-7803 WIRING GP-COMMUNICATION

267-7803 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N D3D1-UP
PART OF 314-3533 INSTALLATION AR-COMMUNICATION

267-7803 WIRING GP-COMMUNICATION

267-7803 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N D3D1-UP
PART OF 314-3533 INSTALLATION AR-COMMUNICATION

336-6242 WIRING GP-COMMUNICATION

336-6242 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N D3D1-UP
PART OF 340-3831 INSTALLATION AR-COMMUNICATION

231-1836 WIRING GP-CONSOLE

231-1836 WIRING GP-CONSOLE -LH
S/N D3D1-UP
PART OF 251-0433 WIRING GP-CONSOLE

251-0433 WIRING GP-CONSOLE

251-0433 WIRING GP-CONSOLE
S/N D3D1-UP
PART OF 229-9072 OPERATOR AR

251-0435 WIRING GP-CONSOLE

251-0435 WIRING GP-CONSOLE -RH
S/N D3D1-UP
PART OF 251-0433 WIRING GP-CONSOLE

251-0482 WIRING GP-CONVERTER

251-0482 WIRING GP-CONVERTER
S/N D3D1-UP
12-VOLT, 7-AMPERE
PART OF 278-9521, 282-2557, 287-3112, 287-7818, 288-1714, 290-4710, 290-9744, 291-4233, 291-4301, 329-8863, 335-8411 OEM AR-MOBILE HYD POWER UNIT
CANNOT BE USED WITH @@@@@251-0485@@@@@

251-0482 WIRING GP-CONVERTER

251-0482 WIRING GP-CONVERTER
S/N D3D1-UP
12-VOLT, 7-AMPERE
PART OF 278-9521 OEM AR-MOBILE HYD POWER UNIT
CANNOT BE USED WITH @@@@@251-0485@@@@@

251-0485 WIRING GP-CONVERTER

251-0485 WIRING GP-CONVERTER
S/N D3D1-UP
12-VOLT, 7-AMPERE
PART OF 278-9521, 282-2557, 287-3112, 287-7818, 288-1714, 290-4710, 329-8863, 356-3496 OEM AR-MOBILE HYD POWER UNIT, 345-7497 OPTION AR-CAB
CANNOT BE USED WITH @@@@@251-0482@@@@@

251-0485 WIRING GP-CONVERTER

251-0485 WIRING GP-CONVERTER
S/N D3D1-UP
12-VOLT, 7-AMPERE
PART OF 278-9521 OEM AR-MOBILE HYD POWER UNIT
CANNOT BE USED WITH @@@@@251-0482@@@@@

236-6226 WIRING GP-ELECTRONIC CONTROL

236-6226 WIRING GP-ELECTRONIC CONTROL
S/N THY1-UP
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

236-6226 WIRING GP-ELECTRONIC CONTROL

236-6226 WIRING GP-ELECTRONIC CONTROL
S/N THY1-7204
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

330-6018 WIRING GP-ELECTRONIC CONTROL

330-6018 WIRING GP-ELECTRONIC CONTROL
S/N THY7205-UP
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

330-6018 WIRING GP-ELECTRONIC CONTROL

330-6018 WIRING GP-ELECTRONIC CONTROL
S/N THY7205-UP
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

238-1568 WIRING GP-FINE SWING

238-1568 WIRING GP-FINE SWING
S/N D3D1-UP
PART OF 278-9511 CHASSIS AR

269-3410 WIRING GP-HEATER

269-3410 WIRING GP-HEATER -AIR INLET MANIFOLD
S/N THY1-UP
PART OF 224-9843 ENGINE AR, 253-5330 ENGINE AR-COMPLETE

259-4964 WIRING GP-MEDIUM PRESSURE

259-4964 WIRING GP-MEDIUM PRESSURE
S/N D3D1-UP
PART OF 255-5822 CONTROL AR-AUXILIARY

251-0430 WIRING GP-PLATFORM

251-0430 WIRING GP-PLATFORM
S/N D3D1-UP
PART OF 229-9072 OPERATOR AR

238-1570 WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N D3D1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 1

238-1570 WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N D3D1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 2

342-3108 WIRING GP-WINDOW WIPER

342-3108 WIRING GP-WINDOW WIPER
S/N D3D1-UP
PART OF 343-1195 WIPER AR-WINDOW

ELECTRONICS GP-MONITOR

221-8861 ELECTRONICS GP-MONITOR

221-8861 ELECTRONICS GP-MONITOR
S/N D3D1-UP
PART OF 278-9510 SPECIAL AR-OEM

ELECTRONICS GP-COMMUNICATION

309-5842 CONTROL & MTG GP-COMMUNICATION

309-5842 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 321SR
S/N D3D1-UP
PART OF 314-3533, 340-3831 INSTALLATION AR-COMMUNICATION

309-5887 CONTROL & MTG GP-COMMUNICATION

309-5887 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 121SR
S/N D3D1-UP
PART OF 314-3533 INSTALLATION AR-COMMUNICATION
Type 1

309-5887 CONTROL & MTG GP-COMMUNICATION

309-5887 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 121SR
S/N D3D1-UP
PART OF 314-3533 INSTALLATION AR-COMMUNICATION
Type 2

338-6891 CONTROL & MTG GP-COMMUNICATION

338-6891 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK 121SR
S/N D3D1-UP
PART OF 340-3831 INSTALLATION AR-COMMUNICATION

262-1421 ELECTRONICS GP-COMMUNICATION

262-1421 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 300
S/N D3D1-UP
PART OF 309-5842 CONTROL & MTG GP-COMMUNICATION

314-3533 INSTALLATION AR-COMMUNICATION

314-3533 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 321SR
S/N D3D1-UP
PART OF 268-1135 CONVERSION AR-MACHINE, 278-9520 CONVERSION AR-UPPER (OEM)

340-3831 INSTALLATION AR-COMMUNICATION

340-3831 INSTALLATION AR-COMMUNICATION -PRODUCT LINK 321SR
S/N D3D1-UP
PART OF 350-3666 OEM AR-MOBILE HYD POWER UNIT

267-7803 WIRING GP-COMMUNICATION

267-7803 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N D3D1-UP
PART OF 314-3533 INSTALLATION AR-COMMUNICATION

267-7803 WIRING GP-COMMUNICATION

267-7803 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N D3D1-UP
PART OF 314-3533 INSTALLATION AR-COMMUNICATION

336-6242 WIRING GP-COMMUNICATION

336-6242 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N D3D1-UP
PART OF 340-3831 INSTALLATION AR-COMMUNICATION

309-5789 ANTENNA & MOUNTING GP

309-5789 ANTENNA & MOUNTING GP -PRODUCT LINK
S/N D3D1-UP
CAB MOUNTED
PART OF 314-3533 INSTALLATION AR-COMMUNICATION

309-5789 ANTENNA & MOUNTING GP

309-5789 ANTENNA & MOUNTING GP -PRODUCT LINK
S/N D3D1-UP
CAB MOUNTED
PART OF 314-3533 INSTALLATION AR-COMMUNICATION

338-6882 ANTENNA & MOUNTING GP

338-6882 ANTENNA & MOUNTING GP -PRODUCT LINK
S/N D3D1-UP
PART OF 340-3831 INSTALLATION AR-COMMUNICATION

CAMERA GP

313-7833 CAMERA & MOUNTING GP

313-7833 CAMERA & MOUNTING GP -WORK AREA VISUAL SYSTEM, REAR
S/N D3D1-UP
PART OF 327-3329 CAMERA & MOUNTING GP

327-3329 CAMERA & MOUNTING GP

327-3329 CAMERA & MOUNTING GP -WORK AREA VISUAL SYSTEM, REAR
S/N D3D1-UP
PART OF 329-6574, 340-3773 CAMERA AR

329-6574 CAMERA AR

329-6574 CAMERA AR
S/N D3D1-UP
PART OF 329-6573 CAMERA & MIRROR AR

340-3773 CAMERA AR

340-3773 CAMERA AR -WORK AREA VISUAL SYSTEM, REAR
S/N D3D1-UP
PART OF 340-3835 CAMERA & MIRROR AR

336-6684 CAMERA GP

336-6684 CAMERA GP -WORK AREA VISUAL SYSTEM, REAR
S/N D3D1-UP
12-VOLT/24-VOLT
PART OF 313-7833 CAMERA & MOUNTING GP

306-8721 WIRING GP-CAMERA

306-8721 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N D3D1-UP
PART OF 329-6574 CAMERA AR

342-3015 WIRING GP-CAMERA

342-3015 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N D3D1-UP
PART OF 340-3773 CAMERA AR

329-6573 CAMERA & MIRROR AR

329-6573 CAMERA & MIRROR AR
S/N D3D1-UP
PART OF 278-9521, 282-2557, 287-3112, 287-7818, 288-1714, 290-4710, 291-4233, 291-4301, 314-5052, 324-8779, 329-8863, 335-8411 OEM AR-MOBILE HYD POWER UNIT
FOR USE WITH @@@@@332-1728@@@@@, @@@@@332-1729@@@@@

340-3835 CAMERA & MIRROR AR

340-3835 CAMERA & MIRROR AR
S/N D3D1-UP
PART OF 350-3666 OEM AR-MOBILE HYD POWER UNIT
FOR USE WITH @@@@@327-6553@@@@@

RADIO GP

263-9088 RADIO GP-COMMUNICATION

263-9088 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N D3D1-UP
PART OF 309-5887 CONTROL & MTG GP-COMMUNICATION
FIELD REPLACEMENT ORDER @@@@@336-3545@@@@@

336-3545 RADIO GP-COMMUNICATION

336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N D3D1-UP
PART OF 309-5887, 338-6891 CONTROL & MTG GP-COMMUNICATION
FIELD REPLACEMENT FOR @@@@@263-9088@@@@@

HARNESS GP

323-9140 HARNESS AS-ENGINE

323-9140 HARNESS AS-ENGINE
S/N THY7205-UP
PART OF 330-6018 WIRING GP-ELECTRONIC CONTROL

419-0841 HARNESS AS-ENGINE

419-0841 HARNESS AS-ENGINE
S/N THY7205-UP
PART OF 330-6018 WIRING GP-ELECTRONIC CONTROL

336-5964 HARNESS AS-LIGHTING

336-5964 HARNESS AS-LIGHTING
S/N D3D1-UP
PART OF 398-7289 KIT-GUARD, 484-8798 KIT-OVERHEAD GUARD

Information:

(For parts list, see above)

ELECTRICAL AND STARTING SYSTEM

ALARM GP

Operation and Maintenance Manual

Travel Alarm - Test - If Equipped
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Troubleshooting

MID 039 - CID 0271 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

New Guidelines For Cleaning Backup Alarms on Certain Cat Products {7406}
2012/03/15

ALTERNATOR GP-CHARGING

Engine News

Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}

Operation and Maintenance Manual

Belt - Inspect/Adjust/Replace
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Special Instruction

Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}

Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}

Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}

Specifications

Alternator and Regulator
C9 Engines for Caterpillar Built Machines

Testing and Adjusting

Charging System - Test
C9 Engines for Caterpillar Built Machines

Charging System - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

MID 039 - CID 0167 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0168 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Alternator - Charging Problem and/or Noisy Operation
C7 and C9 Engines for Caterpillar Built Machines

Disassembly and Assembly

Alternator - Remove and Install
330D MHPU
Mobile Hydraulic Power Unit
Engine Supplement

Service Magazine

Cat® Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/06/25

Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

BATTERY GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Battery - Clean
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Battery Hold-Down - Tighten
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Battery - Recycle
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Fuses - Replace
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Special Instruction

Procedure for the Installation of the New Components that Improve the Cold Starting Capability{1000, 1401, 1456, 1900, 1920}
Procedure for the Installation of the New Components that Improve the Cold Starting Capability{1000, 1401, 1456, 1900, 1920}

Technical Information Bulletin

Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}

Tool Operating Manual

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Testing and Adjusting

Battery - Test
C9 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
C7 and C9 Engines for Caterpillar Built Machines

Battery
C7 and C9 Engines for Caterpillar Built Machines

CID 0168 FMI 01 System Voltage Low
C7 and C9 Engines for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
C7 and C9 Engines for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Disassembly and Assembly

Battery - Remove and Install
330D MHPU
Mobile Hydraulic Power Unit
Engine Supplement

Service Magazine

New Components Improve the Cold Starting Capability {1401, 1453, 1456, 1920}
2008/10/27

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/03/11

CONTROL GP-ELECTRONIC

Systems Operation

Electronic Control System
330D MHPU Mobile Hydraulic Power Unit Hydraulic System

Service Magazine

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Real Time Clock is no Longer Supported {1901}
Real Time Clock is no Longer Supported {1901}

New Control Harness Assembly Is Now Used on Certain Cat® Engines {1408}
New Control Harness Assembly Is Now Used on Certain Cat^® Engines {1408}

ELECTRONICS GP-ENGINE

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Special Instruction

Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}

Service Letter-CSARL

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE ECM SOFTWARE ON CERTAIN OEM MOBILE HYDRAULIC POWER UNITS EQUIPPED WITH C9 ENGINE RATING SOFTWARE
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ENGINE ECM SOFTWARE ON CERTAIN OEM MOBILE HYDRAULIC POWER UNITS EQUIPPED WITH C9 ENGINE RATING SOFTWARE

Technical Information Bulletin

Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}

Specifications

Electronic Control Module
C9 Engines for Caterpillar Built Machines

Troubleshooting

ECM Will Not Communicate with Other Systems or Display Modules
C7 and C9 Engines for Caterpillar Built Machines

Self-Diagnostics
C7 and C9 Engines for Caterpillar Built Machines

Electronic Service Tool Will Not Communicate with ECM
C7 and C9 Engines for Caterpillar Built Machines

Programming Parameters
C7 and C9 Engines for Caterpillar Built Machines

Test ECM Mode
C7 and C9 Engines for Caterpillar Built Machines

CID 0268 FMI 02 Check Programmable Parameters
C7 and C9 Engines for Caterpillar Built Machines

Cat Data Link Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0253 FMI 02 Personality Module mismatch
C7 and C9 Engines for Caterpillar Built Machines

User Defined Shutdown Input Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Flash Programming
C7 and C9 Engines for Caterpillar Built Machines

Diagnostic Codes
C7 and C9 Engines for Caterpillar Built Machines

Replacing the ECM
C7 and C9 Engines for Caterpillar Built Machines

System Overview
C7 and C9 Engines for Caterpillar Built Machines

ECM Will Not Accept Factory Passwords
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0590 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Event Codes
C7 and C9 Engines for Caterpillar Built Machines

System Configuration Parameters
C7 and C9 Engines for Caterpillar Built Machines

Disassembly and Assembly

Speed/Timing Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines

Electronic Control Module - Remove and Install
C9 Engines for Caterpillar Built Machines

Engine Electronic Control - Remove and Install
330D MHPU
Mobile Hydraulic Power Unit
Engine Supplement

Service Magazine

New Engine Software is Now Used {1902, 7620}
2007/02/05

Update on the Factory Password System {1901, 7620}
2008/02/11

New Components Improve the Cold Starting Capability {1401, 1453, 1456, 1920}
2008/10/27

New Software Is Now Used for 330D and 336D Excavators {1902, 7620}
2011/06/02

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
New Machine Software for Cat^® Product Link Is Now Available on Certain Cat^® Products {7490, 7606, 7610, 7620}

Real Time Clock is no Longer Supported {1901}
Real Time Clock is no Longer Supported {1901}

ELECTRONICS GP-POWER TRAIN

Special Instruction

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

ELECTRONICS GP-IMPLEMENT

Special Instruction

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

ELECTRONICS GP-MACHINE

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Operation and Maintenance Manual

Machine Security System - If Equipped
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Special Instruction

Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Machine ECM Trouble Shooting Guideline on Certain Excavators and Mobile Hydraulic Power Units{7569, 7600}
Machine ECM Trouble Shooting Guideline on Certain Excavators and Mobile Hydraulic Power Units{7569, 7600}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Operation
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Diagnostic Operation
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (Machine)
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Related Components
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Letter-APD

Testing and Adjusting

Electronic Control Module (ECM) - Flash Program
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Glossary of Electrical Terms
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Calibration
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (ECM) - Configure
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electronic Control Module (ECM) - Replace
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

CID 1639 FMI 02 Machine Security System incorrect
C7 and C9 Engines for Caterpillar Built Machines

CID 1639 FMI 09 Machine Security System Module not communicating on link
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0041 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0254 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0262 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Diagnostic Code List
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0246 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0247 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0248 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 7600, 7610}
2008/05/19

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/03/11

Updated Machine Software is Available for the Electronics Group {7610, 7620}
2009/03/30

An Improvement to the Electronic Control Module is Made on Certain Excavators {1931, 7600}
2011/12/22

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

CONTROL GP-UNPROGRAMMED

Systems Operation

Testing and Adjusting

Service Magazine

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

CONVERTER GP-ELECTRICAL

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Service Letter-APD

Service Magazine

An Improved Radio Power Converter is used on Excavators. {1408, 1421, 7338}
2009/04/20

ELECTRONICS GP

Special Instruction

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat^® Products {1408}

Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}

Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}

Service Magazine

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}

Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat^® Products {1400}

HORN GP-ELECTRIC

New Horn Is Now Used On Certain Cat Products {7402}
2012/02/17

LIGHTING GP

A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/11/14

MOTOR GP

Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
2011/09/20

PANEL GP-CIRCUIT BREAKER

Operation and Maintenance Manual

Circuit Breakers - Reset
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Troubleshooting

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

PANEL GP-FUSE

Special Instruction

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

RECEPTACLE GP-AUXILIARY START

Service Magazine

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

SENDER GP

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2011/03/22

SENSOR GP

Special Instruction

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Specifications

Injection Actuation Pressure Sensor
C9 Engines for Caterpillar Built Machines

Coolant Temperature Sensor
C9 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor
C9 Engines for Caterpillar Built Machines

Injection Actuation Pressure Sensor
C9 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor
C9 Engines for Caterpillar Built Machines

Fuel Temperature Sensor
C9 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor
C9 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor
C9 Engines for Caterpillar Built Machines

Coolant Temperature Sensor
C9 Engines for Caterpillar Built Machines

Engine Oil Temperature Sensor
C9 Engines for Caterpillar Built Machines

Fuel Temperature Sensor
C9 Engines for Caterpillar Built Machines

Liquid Level Sensor (Water Separator)
C9 Engines for Caterpillar Built Machines

Coolant Temperature Sensor
C9 Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor
C9 Engines for Caterpillar Built Machines

Speed/Timing Sensor
C9 Engines for Caterpillar Built Machines

Engine Oil Temperature Sensor
C9 Engines for Caterpillar Built Machines

Fuel Temperature Sensor
C9 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Testing and Adjusting

Speed Sensor - Adjust
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0041 FMI 04 8 Volt DC Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0261 FMI 13 Engine Timing Calibration required
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Engine Speed/Timing Sensor - Calibrate
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Engine Speed/Timing Sensor Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 1129 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1129 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1129 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Engine Temperature Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0171 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0171 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0544 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0190 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2425 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2425 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2425 - FMI 13
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Disassembly and Assembly

Speed/Timing Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines

Turbocharger Outlet Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines

Coolant Temperature Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines

Injection Actuation Pressure Sensor - Remove and Install
C9 Engines for Caterpillar Built Machines

Service Magazine

Troubleshooting the "Water Separator Has Water" Warning Message {1263, 1439}
2011/12/22

Improved Fuel Level Sender As Is Now Used on Certain Cat® Products {1273, 7481}
2012/10/08

SOLENOID GP

Troubleshooting

MID 039 - CID 0362 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0362 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0362 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

STARTING AID GP

Operation and Maintenance Manual

Ether Starting Aid Cylinder - Replace - If Equipped
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Special Instruction

Technical Information Bulletin

Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}

Troubleshooting

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Ether Injection System - Test
C7 and C9 Engines for Caterpillar Built Machines

Disassembly and Assembly

Air Inlet Heater - Remove
C9 Engines for Caterpillar Built Machines

Air Inlet Heater - Install
C9 Engines for Caterpillar Built Machines

Starting Aid (Air Inlet Heater) - Remove and Install - Engine In Chassis
330D MHPU
Mobile Hydraulic Power Unit
Engine Supplement

Service Magazine

New Components Improve the Cold Starting Capability {1401, 1453, 1456, 1920}
2008/10/27

STARTING MOTOR GP

Special Instruction

Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Technical Information Bulletin

Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}

Specifications

Electric Starting Motor
C9 Engines for Caterpillar Built Machines

Testing and Adjusting

Electric Starting System - Test
C9 Engines for Caterpillar Built Machines

Pinion Clearance - Adjust
C9 Engines for Caterpillar Built Machines

Troubleshooting

MID 039 - CID 0444 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0444 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Disassembly and Assembly

Electric Starting Motor - Remove and Install
C9 Engines for Caterpillar Built Machines

Electric Starting Motor - Remove and Install
330D MHPU
Mobile Hydraulic Power Unit
Engine Supplement

Service Magazine

New Components Improve the Cold Starting Capability {1401, 1453, 1456, 1920}
2008/10/27

Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
2011/09/20

The Starter Solenoid is Improved on Certain Machines {1453}
2013/04/04

SWITCH GP

Operation and Maintenance Manual

Engine Start Switch
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Special Instruction

Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}

Systems Operation

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Troubleshooting

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Service Magazine

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/03/11

TOOLS

Tool Operating Manual

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

Electronic Service Tool Will Not Communicate with ECM
C7 and C9 Engines for Caterpillar Built Machines

Electronic Service Tools
C7 and C9 Engines for Caterpillar Built Machines

Factory Passwords
C7 and C9 Engines for Caterpillar Built Machines

Using Caterpillar Electronic Technician to Determine Diagnostic Codes
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Tools
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

VALVE GP

Systems Operation

Solenoid Valve (Proportional Reducing) - Power Shift System
330D MHPU Mobile Hydraulic Power Unit Hydraulic System

WARNING GP

Service Magazine

New Guidelines For Cleaning Backup Alarms on Certain Cat Products {7406}
2012/03/15

WIRING GP

Operation and Maintenance Manual

Engine Start Switch
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Battery or Battery Cable - Inspect/Replace
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Battery - Recycle
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Fuses - Replace
325D MHPU and 330D MHPU Mobile Hydraulic Power Units

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}
Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE WIPER CONTROL ON VARIOUS 312C, 312D, 315C, 315D, 318C, 319C, 319D, 320C, 322C, 323D, 324D, 325C, 325D, 330C, 330D, 345C, 345D, 365C, AND 385C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WIPER CONTROL ON VARIOUS 312C, 312D, 315C, 315D, 318C, 319C, 319D, 320C, 322C, 323D, 324D, 325C, 325D, 330C, 330D, 345C, 345D, 365C, AND 385C EXCAVATORS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Specifications

Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines

Tool Operating Manual

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Testing and Adjusting

Electric Starting System - Test
C9 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Service Magazine

An Improved Radio Power Converter is used on Excavators. {1408, 1421, 7338}
2009/04/20

An Improved Wiper Control Gp is Now Used {1408, 7301}
2008/08/25

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/03/11

A New Harness Assembly for the Right Hand Console is Now Available {1408}
2009/06/01

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2011/03/22

Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
2010/04/22

A New Console Harness Assembly Is Available for Certain Excavators {1408}
2014/02/24

New Routing of the Right and Left Joystick Wiring Harness Improves Reliability on Certain Excavators and Mobile Hydraulic Power Units {1408}
2013/02/21

A New Special Instruction , "Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators" is Available {1408, 7301}
2014/02/10

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

New Control Harness Assembly Is Now Used on Certain Cat® Engines {1408}
New Control Harness Assembly Is Now Used on Certain Cat^® Engines {1408}

CONNECTION GP

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}

ELECTRONICS GP-MONITOR

Engine News

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

Special Instruction

Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Cat® VIMS Converter Functionality {7610, 7620}
Cat^® VIMS Converter Functionality {7610, 7620}

Technical Information Bulletin

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Systems Operation

Setting Mode
D Series Excavator Monitoring System

Maintenance Information Mode
D Series Excavator Monitoring System

Service Mode
D Series Excavator Monitoring System

Password Change Mode
D Series Excavator Monitoring System

Password Entry
D Series Excavator Monitoring System

Device Test Mode
D Series Excavator Monitoring System

Override Mode
D Series Excavator Monitoring System

Tool Program Mode
D Series Excavator Monitoring System

Output Components
D Series Excavator Monitoring System

Status Mode
D Series Excavator Monitoring System

Input Components
D Series Excavator Monitoring System

Data Link
D Series Excavator Monitoring System

Prestart Monitoring Function
D Series Excavator Monitoring System

General Information
D Series Excavator Monitoring System

Warning Operation
D Series Excavator Monitoring System

Maintenance Mode
D Series Excavator Monitoring System

ECM Information Mode
D Series Excavator Monitoring System

Diagnostic Mode
D Series Excavator Monitoring System

Menu Outline
D Series Excavator Monitoring System

Calibration Mode
D Series Excavator Monitoring System

Performance Mode
D Series Excavator Monitoring System

Configuration Mode
D Series Excavator Monitoring System

Troubleshooting

CID 0286 FMI 05 EMS Oil Lamp open/short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0286 FMI 06 EMS Oil Lamp short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Service Magazine

New Software Prevents the Discrepancy Between the Display on the Monitor and the Service Hour Meter Reading for Certain Excavators {7490, 7601, 7610, 7620}
2008/12/29

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/22

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

New Phone Number for VIMS Support Is Now Available for All Cat® Products Equipped with VIMS {7601}
2015/03/02

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat^® Product Link {7606, 7610, 7620}

HEATER GP

Technical Information Bulletin

Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}

Specifications

Air Inlet Heater
C9 Engines for Caterpillar Built Machines

Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines

Troubleshooting

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Disassembly and Assembly

Air Inlet Heater - Remove
C9 Engines for Caterpillar Built Machines

Air Inlet Heater - Install
C9 Engines for Caterpillar Built Machines

ELECTRONICS GP-WORK TOOL

Special Instruction

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

ELECTRONICS GP-COMMUNICATION

Engine News

A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}

Special Instruction

Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}
Installation Procedure for Product Link PL522 and PL523 (Cellular) {7606}

Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}

Product LinkTM PL421 Installation Quick Reference Guide{7606}
Product Link^TM PL421 Installation Quick Reference Guide{7606}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 235C, 330, 330B, 330C, 330D, 336D, 336F, 345B, 345C, 349F, 350, 365B, 365C, 374D, 385B, 385C, 336E, 349E, 345D, AND 349D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 235C, 330, 330B, 330C, 330D, 336D, 336F, 345B, 345C, 349F, 350, 365B, 365C, 374D, 385B, 385C, 336E, 349E, 345D, AND 349D EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Orientation Of The Antenna For Product Link{733T, 7606}
Orientation Of The Antenna For Product Link{733T, 7606}

Product Link Machine Information Is Not Being Reported On Cat® Products Located in India{7606}
Product Link Machine Information Is Not Being Reported On Cat^® Products Located in India{7606}

Service Letter-China

Service Letter-Asia

Service Letter-APD

Service Magazine

Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2014/07/15

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software Is Now Available for All Cat® Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2014/12/10

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606}
2014/08/08

Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
2015/02/17

Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
2014/06/24

Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

New Inspection and Repair Procedure Is Now Available for Cat® Products Located in India Equipped with Product Link {7606}
2014/09/22

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24

Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat® Products with Cat® Product Link 121/321 {7606}
2014/12/24

Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06

Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17

New Software Is Now Available for All Cat® Products With PL522 China System {7606, 7620}
2015/03/04

New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606, 7620}
2015/06/26

New Troubleshooting Procedure Is Now Available for all Cat® Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12

Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02

New Product Link Software for PL300 Is Now Available for All Cat® Products {7606, 7620}
2015/09/11

CAMERA GP

Technical Information Bulletin

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Service Magazine

Improved Camera Is Now Available for Cat® Object Detection And Vision Applications On Certain Cat Products {7348}
Improved Camera Is Now Available for Cat^® Object Detection And Vision Applications On Certain Cat Products {7348}

ELECTRONICS GP-GENERATOR SET

Special Instruction

Service Magazine

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Cat® Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14

METER GP-SERVICE

Service Meter Adjustment Is Now Available in VisionLinkTM {7478, 7606}
2014/08/20

HARNESS GP

Special Instruction

Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat^® Products Equipped with BR Series Connectors {1408}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Tool Operating Manual

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Magazine