AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

197-0986 STARTING MOTOR GP-ELECTRIC S/N THY1-5574 24 VOLT PART OF 224-9843 ENGINE AR ALSO AN ATTACHMENT 330D L


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
SWITCH GP

EXCAVATOR 330D L EXCAVATOR ERN
 330D Excavator ERN00001-UP (MACHINE) POWERED BY C-9 Engine SEBP4920 330D L ERN   (2006)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
STARTING MOTOR GP-ELECTRIC
180-2435 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
197-0986 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
 

#SEBP49200270
 

197-0986: STARTING MOTOR GP-ELECTRIC

197-0986 STARTING MOTOR GP-ELECTRIC
S/N THY1-5574
24 VOLT
PART OF 224-9843 ENGINE AR
ALSO AN ATTACHMENT
i01761913 SEBP4920
1970986 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
2. 4H-7869 [1] GASKET  
3. 207-1556 Y [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
4. 8Y-9603 [1] CABLE AS-STARTING MOTOR  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(28 CM)  
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP49200271
 

207-1556: STARTING MOTOR GP-ELECTRIC

207-1556 STARTING MOTOR GP-ELECTRIC
S/N THY1-UP
24-VOLT
PART OF 197-0986 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
ALSO AN ATTACHMENT
i01593340 SEBP4920
2071556 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)(INSULATED)  
    (INCLUDES BOLT, NUTS, & CONNECTORS)
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
31. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES & SEAL)
32. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEAL, NUT, GASKET & RETAINER)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW AS, WASHERS, SPACER & NUT)
 

#SEBP49200272
 

237-1962: STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
S/N THY1-UP
24-VOLT
Type 1
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
FIELD REPLACEMENT FOR @@@@@207-1556@@@@@
i01972308 SEBP4920
2371962 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS (STARTING MOTOR)  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
45. 125-6537 [1] INSULATOR  
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 318-2082 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
65. 125-6536 [1] TERMINAL AS  
 

#SEBP49200273
 

237-1962: STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
S/N THY1-UP
24-VOLT
Type 2
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
FIELD REPLACEMENT FOR @@@@@207-1556@@@@@
i06991417 SEBP4920
2371962 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS (STARTING MOTOR)  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 338-3453 C [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP49200274
 

338-3454: STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC
S/N THJ1-UP; ERN1-UP; THY5575-UP
24-VOLT
PART OF 180-2435 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@237-1962@@@@@
ALSO AN ATTACHMENT
i03920474 SEBP4920
3383454 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 125-6535 [1] COVER-STARTING MOTOR  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 494-6475 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
40A. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49200275
 

547-7976: SWITCH & WIRE GP-FUEL LEVEL

547-7976 SWITCH & WIRE GP-FUEL LEVEL
S/N THJ1-UP; ERN1-UP
FUEL LEVEL SWITCH KIT
PART OF 5C-6108 SWITCH GP-REFUELING
AN ATTACHMENT
i07202495 SEBP4920
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [18] STRAP-CABLE  
  418-6596 [1] SWITCH AS-LIQUID LEVEL  
  3T-4696 [1] TERMINAL-RING (10-GA TO 12-GA, 7/16-IN SCREW)  
  6A-3361 H WIRE-ELECTRICAL (16-GA)(60-DM)  
  H   ORDER BY THE DECIMETER
 

#SEBP49200276
 

7N-0719: SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N THJ1-UP; ERN1-UP
PART OF 231-1756, 274-5081 PANEL GP-CIRCUIT BREAKER
ALSO AN ATTACHMENT
i00762190 SEBP4920
7N0719 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 2H-3922 [2] LOCKWASHER  
4. 9F-5644 [2] LOCKWASHER  
5. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
 

#SEBP49200277
 

125-1302: SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC -START RELAY
S/N THJ1-UP; ERN1-UP
24-VOLT
PART OF 231-1756, 274-5081 PANEL GP-CIRCUIT BREAKER
ALSO AN ATTACHMENT
i00526676 SEBP4920
1251302 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
4. 3B-4504 [2] LOCKWASHER  
5. 5C-2890 M [2] NUT (M6X1-THD)  
6. 9X-1813 E SLEEVE (16-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49200278
 

398-0940: SWITCH GP-MAGNETIC

398-0940 SWITCH GP-MAGNETIC
S/N THY1-UP
PART OF 269-3410 WIRING GP-HEATER
ALSO AN ATTACHMENT
i05281789 SEBP4920
3980940 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 3F-9556 [2] LOCKWASHER  
4. 6V-8186 [2] NUT-FULL (5/16-24-THD)  
5. 6V-8378 [2] NUT (10-32-THD)  
6. 8F-1434 [2] LOCKWASHER  
 

#SEBP49200279
 

258-0883: SWITCH GP-PRESSURE

258-0883 SWITCH GP-PRESSURE
S/N THJ1-UP; ERN1-UP
PART OF 237-8752, 259-3918 LINES GP-FUEL
ALSO AN ATTACHMENT
i02246432 SEBP4920
2580883 SWITCH GP-PRESSURE Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 9X-7737 [1] SEAL-O-RING  
3. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 9X-1813 E SLEEVE (14-CM)  
5. 6V-4589 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
 

Information:

Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Specifications
Electric Starting Motor
C9 Engines for Caterpillar Built Machines
Electric Starting Motor
C9 Engines for Caterpillar Built Machines
Electric Starting Motor
C9 Engines for Caterpillar Built Machines
Testing and Adjusting
Electric Starting System - Test
C9 Engines for Caterpillar Built Machines
Pinion Clearance - Adjust
C9 Engines for Caterpillar Built Machines
Troubleshooting
MID 039 - CID 0444 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0444 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C9 Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Service Magazine
New Components Improve the Cold Starting Capability {1401, 1453, 1456, 1920}
2008/10/27
Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
2011/09/20

Caterpillar Parts SIS Catalog 330D L :

STARTING MOTOR GP-ELECTRIC
180-2435 STARTING MOTOR GP-ELECTRIC
314-3587 STARTING AR-COLD WEATHER
275-3748 STARTING AR-COLD WEATHER
STARTING AID GP-ETHER
239-6677 STARTING AID GP-ETHER
STARTING AID GP-ETHER
239-6677 STARTING AID GP-ETHER
STARTING AID GP
238-3215 STARTING AID GP
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
237-1962 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
547-7976 SWITCH & WIRE GP-FUEL LEVEL
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC

Truck sale:

Caterpillar 330DL, Construction
130,000 
Caterpillar 330DL, Construction
- Crawler Excavators
WYOMING MACHINERY
 
 
Caterpillar 330DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 330DL, Construction
56,700 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 330DL, Construction
 
Caterpillar 330DL, Construction
- Crawler Excavators
MANTRAC GHANA LIMITED
Ghana
Caterpillar 330DL, Construction
73,710 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.