259-4964 WIRING GP-MEDIUM PRESSURE S/N THJ1-UP; ERN1-UP PART OF 255-5822 CONTROL AR-AUXILIARY AN ATTACHMENT 330D L

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 259-4964 WIRING GP-
1. 251-0430 WIRING GP-
2. 283-8365 WIRING GP-
3. 283-8365 WIRING GP-
4. 238-1570 WIRING GP-
5. 238-1570 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

6. 227-6044 DRIVE GP-F
7. 227-6045 DRIVE GP-F
8. 227-6188 DRIVE GP-F
9. 227-6189 DRIVE GP-F
0. INFORMATION

EXCAVATOR 330D L EXCAVATOR ERN
330D Excavator ERN00001-UP (MACHINE) POWERED BY C-9 Engine SEBP4920 330D L ERN (2006)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

259-5062 WIRING GP-FUEL SYSTEM

269-3410 WIRING GP-HEATER

259-4964 WIRING GP-MEDIUM PRESSURE

251-0430 WIRING GP-PLATFORM

283-8365 WIRING GP-PLATFORM

#SEBP49200330

259-4964: WIRING GP-MEDIUM PRESSURE

WIRING GP-MEDIUM PRESSURE

259-4964 WIRING GP-MEDIUM PRESSURE
S/N THJ1-UP; ERN1-UP
PART OF 255-5822 CONTROL AR-AUXILIARY
AN ATTACHMENT

i02389279 SEBP4920

2594964 WIRING GP-MEDIUM PRESSURE Parts scheme

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7K-1181	[3]	STRAP-CABLE
3.	102-7886	[1]	SPACER (11X20X80-MM THK)
4.	204-1611	[1]	STRAP (DUAL)
5.	259-5125	[1]	HARNESS AS-CONTROL
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
6.	132-5789	[1]	CLIP (LADDER)
7.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4198 M	[1]	BOLT (M10X1.5X100-MM)
	M		METRIC PART

#SEBP49200331

251-0430: WIRING GP-PLATFORM

WIRING GP-PLATFORM

251-0430 WIRING GP-PLATFORM
S/N THJ1-UP; ERN1-UP
PART OF 229-9072 OPERATOR AR

i02296219 SEBP4920

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[16]	STRAP-CABLE
4.	111-4836	[4]	CLIP
5.	111-4838	[2]	CLIP
6.	111-4839	[2]	STRAP
7.	116-0118	[14]	CLIP
8.	234-1122	[1]	COVER
9.	251-0299	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	2L-8074	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
10.	264-7095	[1]	HARNESS AS-PLATFORM
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[25]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[23]	STRAP-CABLE
	8T-8737	[39]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[14]	TERMINAL (FEMALE)
	9W-0852	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[32]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	9X-3402	[97]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[97]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1768	[10]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8069	[4]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	155-2270	[12]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[3]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
	230-4011	[4]	PLUG AS-CONNECTOR (2-PIN)
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
	238-2363	[10]	TERMINAL (FEMALE)
	238-2366	[7]	TERMINAL (MALE)
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[4]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
11.	095-0728 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	3E-5169	[1]	GUARD-SWITCH
14.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
15.	7X-2621 M	[7]	BOLT (M10X1.5X12-MM)
16.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49200332

283-8365: WIRING GP-PLATFORM

WIRING GP-PLATFORM

283-8365 WIRING GP-PLATFORM -ULTRA-HIGH DEMOLITION
S/N THJ1-UP
PART OF 284-2246 OPERATOR AR
Type 1
AN ATTACHMENT

i02532478 SEBP4920

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	7K-1181	[11]	STRAP-CABLE
3.	111-4838	[4]	CLIP
4.	111-4839	[4]	STRAP
5.	116-0118	[12]	CLIP
6.	227-7196	[2]	PLATE
7.	227-7198	[4]	CLAMP
8.	287-4650	[1]	HARNESS AS-CHASSIS
	3S-2093	[23]	STRAP-CABLE
	197-4385	[3]	DIODE
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[13]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[4]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
9.	289-3228	[1]	HARNESS AS-SENSOR (BOOM FLOAT)
	3S-2093	[26]	STRAP-CABLE
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
10.	289-3230	[1]	HARNESS AS-QUICK COUPLER
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
11.	8T-4121	[17]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4137 M	[13]	BOLT (M10X1.5X20-MM)
13.	8T-4172 M	[4]	BOLT (M10X1.5X80-MM)
	M		METRIC PART

#SEBP49200333

283-8365: WIRING GP-PLATFORM

WIRING GP-PLATFORM

283-8365 WIRING GP-PLATFORM -ULTRA-HIGH DEMOLITION
S/N THJ1-UP
PART OF 284-2246 OPERATOR AR
Type 2
AN ATTACHMENT

i02873723 SEBP4920

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181 C	[13]	STRAP-CABLE
3.	111-4838	[4]	CLIP
4.	111-4839	[4]	STRAP
5.	116-0118	[12]	CLIP
6.	227-7196	[2]	PLATE
7.	227-7198	[4]	CLAMP
8.	316-9004 C	[1]	HARNESS AS-PLATFORM
9.	289-3228	[1]	HARNESS AS-SENSOR (BOOM FLOAT)
10.	289-3230	[1]	HARNESS AS-QUICK COUPLER
11.	8T-4121	[17]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4137 M	[13]	BOLT (M10X1.5X20-MM)
13.	8T-4172 M	[4]	BOLT (M10X1.5X80-MM)
14.	297-0761	[1]	HARNESS AS-PLATFORM
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP49200334

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N THJ1-UP; ERN1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 1
AN ATTACHMENT

i02180323 SEBP4920

2381570 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	238-1593	[1]	WIRE AS
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49200335

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N THJ1-UP; ERN1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
Type 2
AN ATTACHMENT

i03161300 SEBP4920

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	319-1335 C	[1]	HARNESS AS-WIRING
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328 C	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
16.	7K-1181 C	[11]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49200336

227-6044: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6044 DRIVE GP-FINAL -WITH MOTOR
S/N THJ1-UP
PART OF 353-0500 DRIVE GP-FINAL, 280-1355 FRAME AR-UNDERCARRIAGE
AN ATTACHMENT

i02449660 SEBP4920

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	225-4504 CY	[1]	MOTOR & MTG GP-TRAVEL
2.	227-6045 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP49200337

227-6045: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6045 DRIVE GP-FINAL -WITHOUT MOTOR
S/N THJ1-UP
PART OF 227-6044 DRIVE GP-FINAL
AN ATTACHMENT

i02180040 SEBP4920

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-0524	[2]	CONE-BEARING
2.	2R-0525	[2]	CUP-BEARING
3.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
4.	7M-8485	[2]	SEAL-O-RING
5.	7Y-0661	[3]	SHAFT-PLANETARY
6.	7Y-0662	[4]	SHAFT-PLANETARY
7.	199-4583	[11]	BEARING AS
8.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
9.	7Y-1469	[1]	COUPLING
10.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
11.	7Y-1472 B	[1]	SHIM (0.15-MM THK)
12.	7Y-1473 B	[1]	SHIM (0.3-MM THK)
13.	7Y-1474 B	[1]	SHIM (0.4-MM THK)
14.	7Y-1475 B	[1]	SHIM (0.5-MM THK)
15.	7Y-1476 B	[1]	SHIM (0.6-MM THK)
16.	7Y-1477 B	[1]	SHIM (0.7-MM THK)
17.	7Y-1478 B	[1]	SHIM (0.8-MM THK)
18.	7Y-1479 B	[1]	SHIM (1-MM THK)
19.	7Y-1480 B	[1]	SHIM (1.6-MM THK)
20.	7Y-1482	[1]	CARRIER-PLANETARY
21.	7Y-1483	[1]	GEAR-RING (63-TEETH)
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1487	[1]	GEAR-RING (85-TEETH)
24.	7Y-1488	[1]	CARRIER AS
	7Y-0656	[3]	SHAFT-PLANETARY
25.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
26.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
27.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
28.	7Y-1498	[1]	COVER
29.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
30.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
31.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
32.	110-7217	[2]	RING-RETAINING
33.	114-1541	[6]	PIN-DOWEL
34.	169-5559	[1]	GEAR-SUN (26-TEETH)
35.	199-4719	[1]	GEAR-COUPLING
36.	200-3489	[1]	HOUSING-MOTOR
37.	200-3490	[1]	HOUSING-GEAR
38.	205-9025	[1]	SEAL GP-DUO-CONE
	205-9024	[2]	RING-TORIC
39.	227-6048	[12]	WASHER (26X40X4-MM THK)
40.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
41.	199-4582	[3]	BEARING AS
42.	095-0891	[7]	PIN-SPRING
43.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
44.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
45.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
46.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
47.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
48.	8C-5240	[1]	SEAL-O-RING
49.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
50.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
51.	8T-4240	[3]	RING-RETAINING
52.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP49200338

227-6188: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6188 DRIVE GP-FINAL -WITH MOTOR
S/N THJ1-291; ERN275-299
PART OF 191-2576 POWER TRAIN AR

i02711885 SEBP4920

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	191-5606 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	227-6189 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP49200339

227-6189: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6189 DRIVE GP-FINAL -WITHOUT MOTOR
S/N THJ1-291; ERN275-299
PART OF 227-6188 DRIVE GP-FINAL

i02712020 SEBP4920

For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	7Y-0639	[1]	GEAR-SUN (21-TEETH)
3.	7Y-0642	[1]	GEAR-RING (63-TEETH)
4.	7Y-0643	[1]	CARRIER
5.	7Y-0645	[1]	CARRIER
6.	7Y-0659	[3]	GEAR-PLANETARY (22-TEETH)
7.	7Y-0661	[3]	SHAFT-PLANETARY
8.	7Y-0662	[4]	SHAFT-PLANETARY
9.	7Y-0663	[4]	GEAR-PLANETARY (20-TEETH)
10.	7Y-0667	[1]	RING-RETAINING
11.	7Y-0673	[1]	GEAR-RING (73-TEETH)
12.	7Y-0676	[3]	GEAR-PLANETARY (24-TEETH)
13.	7Y-0731	[1]	CARRIER AS
	7Y-0656	[3]	SHAFT-PLANETARY
14.	7Y-1056	[1]	SHIM (0.8-MM THK)
	7Y-1057	[1]	SHIM (1-MM THK)
	267-6809	[1]	SHIM (0.75-MM THK)
	267-6810	[1]	SHIM (0.85-MM THK)
	267-6811	[1]	SHIM (0.9-MM THK)
	267-6812	[1]	SHIM (0.95-MM THK)
	267-6813	[1]	SHIM (1.2-MM THK)
	267-6814	[1]	SHIM (1.4-MM THK)
	267-6815	[1]	SHIM (1.8-MM THK)
	267-6816	[1]	SHIM (2-MM THK)
	267-6817	[1]	SHIM (2.3-MM THK)
15.	1U-8846 B		SEALANT-GASKET
16.	7Y-1094 M	[14]	WASHER (66X102X1-MM THK)
17.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
18.	094-0577	[1]	PLATE (7-MM THK)
	094-0578	[1]	PLATE (8-MM THK)
	094-0579	[1]	PLATE (9-MM THK)
	094-0580	[1]	PLATE (10-MM THK)
19.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
20.	8T-4240	[3]	RING-RETAINING
21.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
22.	110-7231	[1]	GEAR-SUN (18-TEETH)
23.	114-1541	[6]	PIN-DOWEL
24.	191-2521	[1]	GEAR-SUN (23-TEETH)
25.	199-4582	[3]	BEARING AS
26.	199-4583	[11]	BEARING AS
27.	213-4737	[1]	SEAL GP-DUO-CONE
28.	227-6190	[1]	HOUSING-MOTOR
29.	227-6191	[1]	HOUSING (SPROCKET)
30.	227-6192	[1]	GEAR-COUPLING
31.	7Y-0644	[1]	SPACER (163X190X8-MM THK)
32.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
33.	7M-8485	[2]	SEAL-O-RING
34.	6V-8237	[10]	WASHER (26X44X4-MM THK)
35.	6V-8133 M	[10]	BOLT (M24X3X80-MM)
36.	2P-3628	[1]	SEAL-O-RING
37.	191-2645	[1]	COUPLING
38.	191-2526	[1]	COVER
39.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
40.	279-0344	[2]	BEARING AS-TAPERED ROLLER
41.	093-1731	[1]	RING-RETAINING
42.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
43.	095-0891	[7]	PIN-SPRING

			PARTS THAT ARE NOT CALLED OUT IN THE GRAPHIC ARE NOT SERVICED SEPARATELY
	B		USE AS REQUIRED
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Battery or Battery Cable - Inspect/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Battery - Recycle
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

SmartBoom Operation - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

SmartBoom Control - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Power Receptacle - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Fuses - Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}
Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}

Master Guide for Field Installation of 292-3101 Hydraulic Control Arrangement on Certain Hydraulic Excavators{1408, 5051, 5057, 5059, 5705, 7405, 7557}
Master Guide for Field Installation of 292-3101 Hydraulic Control Arrangement on Certain Hydraulic Excavators{1408, 5051, 5057, 5059, 5705, 7405, 7557}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE WIPER CONTROL ON VARIOUS 312C, 312D, 315C, 315D, 318C, 319C, 319D, 320C, 322C, 323D, 324D, 325C, 325D, 330C, 330D, 345C, 345D, 365C, AND 385C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WIPER CONTROL ON VARIOUS 312C, 312D, 315C, 315D, 318C, 319C, 319D, 320C, 322C, 323D, 324D, 325C, 325D, 330C, 330D, 345C, 345D, 365C, AND 385C EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN WIRING HARNESSES ON CERTAIN 324D L, 324D LN, 325D, 330D, 345C, 345C L, 365C L, 385C, M325D MH EXCAVATORS AND WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN WIRING HARNESSES ON CERTAIN 324D L, 324D LN, 325D, 330D, 345C, 345C L, 365C L, 385C, M325D MH EXCAVATORS AND WHEELED EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN WIRING HARNESSES ON CERTAIN 324D LN, 325D, 330D, 345C, 365C L, AND M325D MH EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN WIRING HARNESSES ON CERTAIN 324D LN, 325D, 330D, 345C, 365C L, AND M325D MH EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN WIRING HARNESSES ON CERTAIN 323D, 324D, 325D, 330D, 345B, 345D, 365B, AND 365C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CERTAIN WIRING HARNESSES ON CERTAIN 323D, 324D, 325D, 330D, 345B, 345D, 365B, AND 365C EXCAVATORS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Technical Information Bulletin

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Specifications

Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS

Testing and Adjusting

Electric Starting System - Test
C9 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS (CD700)

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS (CD700)

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS (CD700)

Overload Warning - Set - If Equipped
330D and 336D Excavators Hydraulic System

Connector Contact Description
AccuGrade^® GPS (CD700)

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Electrical Power Supply
AccuGrade^® GPS (CD700)

CAN Data Link - Test
AccuGrade^® GPS (CD700)

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17