AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

290-9287 STICK GP-HOE S/N THJ1-UP; ERN1-UP 2.55-M (8.4-FT). TB1-FAMILY PART OF 290-1823 STICK AR-HOE AN ATTACHMENT 330D L


IMPLEMENTS
STICK GP
BOOM GP
ACTUATOR GP
WORK TOOLS
BUCKET GP

EXCAVATOR 330D L EXCAVATOR ERN
 330D Excavator ERN00001-UP (MACHINE) POWERED BY C-9 Engine SEBP4920 330D L ERN   (2006)

IMPLEMENTS

STICK GP
STICK GP-HOE
290-9275 STICK GP-HOE
STICK GP-HOE
290-9284 STICK GP-HOE
STICK GP-HOE
290-9287 STICK GP-HOE
STICK GP-HOE
290-9318 STICK GP-HOE
SUPPORT AR-BOOM & STICK
252-8233 SUPPORT AR-BOOM & STICK
 

#SEBP49201190
 

290-9287: STICK GP-HOE

290-9287 STICK GP-HOE
S/N THJ1-UP; ERN1-UP
2.55-M (8.4-FT). TB1-FAMILY
PART OF 290-1823 STICK AR-HOE
AN ATTACHMENT
i02763617 SEBP4920
2909287 STICK GP-HOE Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 9X-4598 [2] SEAL-LIP TYPE  
3. 093-0349 [2] WASHER (22X60X6-MM THK)  
4. 148-3386 [2] PIN AS  
5. 201-3003 [2] SPACER (92X160X7-MM THK)  
6. 290-9288 [1] STICK & BEARING AS  
6A. 4I-6897 [2] BUSHING  
6B. 228-5619 [2] BUSHING  
6C. 236-8561 [2] BUSHING  
7. 093-0366 [2] SPACER (93X130X12-MM THK)  
8. 166-1487 [2] SHIM (2-MM THK)  
9. 166-1494 [2] SEAL-LIP TYPE  
10. 166-1498 [2] SEAL-LIP TYPE  
11. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
12. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
  M   METRIC PART
 

#SEBP49201191
 

290-9318: STICK GP-HOE

290-9318 STICK GP-HOE -MASS
S/N THJ1-UP; ERN1-UP
2.2-M (7.1-FT). TB1-FAMILY, QUICK COUPLER
PART OF 290-1824 STICK AR-HOE
AN ATTACHMENT
i02763573 SEBP4920
2909318 STICK GP-HOE Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 9X-4598 [2] SEAL-LIP TYPE  
3. 093-0349 [2] WASHER (22X60X6-MM THK)  
4. 148-3386 [2] PIN AS  
5. 201-3003 [2] SPACER (92X160X7-MM THK)  
6. 290-9319 [1] STICK & BEARING AS  
6A. 4I-6897 [2] BUSHING  
6B. 228-5619 [2] BUSHING  
6C. 236-8561 [2] BUSHING  
7. 093-0366 [2] SPACER (93X130X12-MM THK)  
8. 166-1487 [2] SHIM (2-MM THK)  
9. 166-1494 [2] SEAL-LIP TYPE  
10. 166-1498 [2] SEAL-LIP TYPE  
11. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
12. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
  M   METRIC PART
 

#SEBP49201192
 

252-8233: SUPPORT AR-BOOM & STICK

252-8233 SUPPORT AR-BOOM & STICK -TRANSPORTATION
S/N THJ1-UP; ERN1-UP
PART OF 290-9705 FRONT AR-LONG REACH
AN ATTACHMENT
i02200654 SEBP4920
2528233 SUPPORT AR-BOOM & STICK Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-9722 [2] BINDER AS-LOAD  
2. 199-1284 [2] CHAIN  
3. 199-1285 [6] ROD  
4. 252-8219 Y [1] SUPPORT GP-BOOM  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49201193
 

217-5029: SUPPORT GP-BOOM

217-5029 SUPPORT GP-BOOM -TRANSPORTATION
S/N THJ1-UP
PART OF 277-6000, 277-9000 BOOM AR
AN ATTACHMENT
i01711661 SEBP4920
2175029 SUPPORT GP-BOOM Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-5030 Y [1] SUPPORT GP-BOOM  
2. 199-1285 [8] ROD  
3. 1U-9722 [2] BINDER AS-LOAD  
4. 199-1284 [4] CHAIN  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49201194
 

217-5030: SUPPORT GP-BOOM

217-5030 SUPPORT GP-BOOM -TRANSPORTATION
S/N THJ1-UP
PART OF 217-5029 SUPPORT GP-BOOM
AN ATTACHMENT
i01711939 SEBP4920
2175030 SUPPORT GP-BOOM Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-5031 [1] SUPPORT AS  
2. 217-6090 [1] LINK AS  
  7X-2559 M [2] BOLT (M16X2X160-MM)  
  8T-4132 M [2] NUT (M16X2-THD)  
3. 217-6091 [2] PIN AS  
4. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP49201195
 

252-8219: SUPPORT GP-BOOM

252-8219 SUPPORT GP-BOOM -TRANSPORTATION
S/N THJ1-UP; ERN1-UP
PART OF 252-8233 SUPPORT AR-BOOM & STICK
AN ATTACHMENT
i02200710 SEBP4920
2528219 SUPPORT GP-BOOM Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-6090 [1] LINK AS  
2. 217-6091 [2] PIN AS  
3. 252-8218 [1] SUPPORT AS  
4. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
 

#SEBP49201196
 

275-4873: ACTUATOR GP-CLAMSHELL

275-4873 ACTUATOR GP-CLAMSHELL -D-FAMILY
S/N THJ1-UP; ERN1-UP
Type 1
AN ATTACHMENT
i02437385 SEBP4920
2754873 ACTUATOR GP-CLAMSHELL Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-8011 [2] CAP-PROTECTION  
2. 8X-7933 [1] SPACER (33X57X14-MM THK)  
3. 119-2378 [2] SUPPORT AS  
4. 145-4488 [1] TUBE AS  
5. 145-5836 [1] BRACKET  
6. 145-7053 I [2] HOSE AS  
7. 200-5670 [2] CONNECTOR AS  
    (EACH INCLUDES)
  4K-1388 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  [1] CONNECTOR  
8. 207-0352 [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
9. 207-0353 [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
10. 231-9164 J [2] FITTING GP-HYDRAULIC (QUICK DISCONNECT, MALE)  
11. 276-3404 [1] CHANNEL  
12. 289-8717 [1] BRACKET  
13. 289-9027 [1] BRACKET  
14. 1P-3703 [3] SEAL-RECTANGULAR  
15. 6V-0400 [4] FLANGE-HALF  
16. 6V-9172 [2] NUT (1-7/16-12-THD)  
17. 7X-2572 M [1] BOLT (M24X3X35-MM)  
18. 7Y-3732 [2] CLIP  
19. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
21. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
22. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
23. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
24. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
25. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
28. 9X-2199 M [1] BOLT (M30X3.5X50-MM)  
29. 3V-9744 [2] SPACER  
30. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
   
    AVAILABLE REPAIR KIT(S):
  239-3483 J [1] KIT-REPAIR (QUICK DISCONNECT)  
    (INCLUDES O-RINGS, VALVE SEALS, ELASTIC RINGS & BACKUP RING)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP49201197
 

275-4873: ACTUATOR GP-CLAMSHELL

275-4873 ACTUATOR GP-CLAMSHELL -D-FAMILY
S/N THJ1-UP; ERN1-UP
Type 2
AN ATTACHMENT
i02710980 SEBP4920
2754873 ACTUATOR GP-CLAMSHELL Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-8011 [2] CAP-PROTECTION  
2. 8X-7933 [1] SPACER (33X57X14-MM THK)  
3. 119-2378 [2] SUPPORT AS  
4. 145-4488 [1] TUBE AS  
5. 145-5836 [1] BRACKET  
6. 145-7053 I [2] HOSE AS  
7. 200-5670 [2] CONNECTOR AS  
    (EACH INCLUDES)
  4K-1388 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  [1] CONNECTOR  
8. 290-9756 CH [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
9. 290-9757 CH [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0184 [1] VALVE-RELIEF  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
10. 231-9164 J [2] FITTING GP-HYDRAULIC (QUICK DISCONNECT, MALE)  
11. 276-3404 [1] CHANNEL  
12. 289-8717 [1] BRACKET  
13. 289-9027 [1] BRACKET  
14. 1P-3703 [3] SEAL-RECTANGULAR  
15. 6V-0400 [4] FLANGE-HALF  
16. 6V-9172 [2] NUT (1-7/16-12-THD)  
17. 7X-2572 M [1] BOLT (M24X3X35-MM)  
18. 7Y-3732 [2] CLIP  
19. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
21. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
22. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
23. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
24. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
25. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
28. 9X-2199 M [1] BOLT (M30X3.5X50-MM)  
29. 3V-9744 [2] SPACER  
30. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
   
    AVAILABLE REPAIR KIT(S):
  239-3483 J [1] KIT-REPAIR (QUICK DISCONNECT)  
    (INCLUDES O-RINGS, VALVE SEALS, ELASTIC RINGS & BACKUP RING)
  290-9759 H [1] KIT-SEAL (SELECTOR VALVE)  
  C   CHANGE FROM PREVIOUS TYPE
  H   KIT MARKED H SERVICES PART(S) MARKED H
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP49201198
 

275-4873: ACTUATOR GP-CLAMSHELL

275-4873 ACTUATOR GP-CLAMSHELL -D-FAMILY
S/N THJ1-UP; ERN1-UP
Type 3
AN ATTACHMENT
i03151475 SEBP4920
2754873 ACTUATOR GP-CLAMSHELL Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8U-8011 [2] CAP-PROTECTION  
2. 8X-7933 C [2] SPACER (33X57X14-MM THK)  
3. 119-2378 [2] SUPPORT AS  
4. 145-4488 [1] TUBE AS  
5. 145-5836 [1] BRACKET  
6. 145-7053 I [2] HOSE AS  
7. 200-5670 [2] CONNECTOR AS  
    (EACH INCLUDES)
  4K-1388 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  [1] CONNECTOR  
8. 290-9756 H [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
9. 290-9757 H [1] VALVE GP-SELECTOR (BUCKET/CLAMSHELL)  
  188-0184 [1] VALVE-RELIEF  
  188-0185 [1] VALVE-CHECK  
  188-0186 [1] HANDLE  
10. 231-9164 J [2] FITTING GP-HYDRAULIC (QUICK DISCONNECT, MALE)  
11. 166-5495 C [1] CHANNEL  
12. 289-8717 [1] BRACKET  
13. 289-9027 [1] BRACKET  
14. 1P-3703 [3] SEAL-RECTANGULAR  
15. 6V-0400 [4] FLANGE-HALF  
16. 6V-9172 [2] NUT (1-7/16-12-THD)  
17. 326-7298 C [1] PIN AS  
18. 7Y-3732 [2] CLIP  
19. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
20. 326-7295 C [1] PIN AS  
21. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
22. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
23. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
24. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
25. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
27. 8T-7930 M [4] BOLT (M12X1.75X160-MM)  
28. 7X-7900 CM [1] BOLT (M30X3.5X50-MM)  
29. 3V-9744 [2] SPACER  
30. 8T-4910 M [4] BOLT (M12X1.75X60-MM)  
   
    AVAILABLE REPAIR KIT(S):
  239-3483 J [1] KIT-REPAIR (QUICK DISCONNECT)  
    (INCLUDES O-RINGS, VALVE SEALS, ELASTIC RINGS & BACKUP RING)
  290-9759 H [1] KIT-SEAL (SELECTOR VALVE)  
  C   CHANGE FROM PREVIOUS TYPE
  H   KIT MARKED H SERVICES PART(S) MARKED H
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP49201199
 

250-6430: ADJUSTER GP-BUCKET

250-6430 ADJUSTER GP-BUCKET -DB-FAMILY
S/N THJ1-UP; ERN1-UP
PART OF 270-1282, 270-1283, 270-1284, 270-1285, 270-1286, 270-1292, 270-1295, 270-1303, 270-1304, 270-1307, 270-1309, 270-1310, 270-1312, 270-1313 BUCKET & ADJUSTER GP
AN ATTACHMENT
i02421903 SEBP4920
2506430 ADJUSTER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-6605 B [6] SHIM (1-MM THK)  
2. 4I-6604 B [4] SHIM (0.5-MM THK)  
3. 4I-6626 [1] PIN  
4. 134-8951 [1] PLATE  
5. 7X-2563 M [5] BOLT (M20X2.5X60-MM)  
6. 8T-4123 [5] WASHER (3.62X5.75X0.375-MM THK)  
7. 250-6457 [1] FLANGE  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Boom, Stick and Bucket Operation
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Boom and Stick Linkage - Lubricate
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Boom and Stick Linkage - Lubricate
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Boom/Stick/Bucket Combinations
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Special Instruction
Procedure for the Repair of Cracks on Reach Sticks for Certain Excavators{6502}
Procedure for the Repair of Cracks on Reach Sticks for Certain Excavators{6502}
Installation Procedure For Mounting Blocks{0679, 6502}
Installation Procedure For Mounting Blocks{0679, 6502}
Rework Procedure to Repair Cracks from the Weld of the Support Plate for the Auxiliary Stop Valve of the Auxiliary Stick on Certain 330D and 336D Excavators{6502}
Rework Procedure to Repair Cracks from the Weld of the Support Plate for the Auxiliary Stop Valve of the Auxiliary Stick on Certain 330D and 336D Excavators{6502}
Specifications
Stick - 3.9 m (12.80 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Stick - 2.15 m (7.1 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Stick - 2.6 m (8.36 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Stick - 3.2 m (10.50 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Stick - 2.80 m (9.2 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Stick - 2.2 m (7.05 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Stick - 7.12 m (23.360 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Stick - 6.00 m (19.7 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Disassembly and Assembly
Stick Bearings and Seals - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Stick Bearings and Seals - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Stick - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Stick - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
An Improved 3.9 Meter Stick is Now Available for 330D and 336D Excavators {6502}
2010/06/09
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2010/10/12
An Improvement has been Made to Reduce the Amount of Radial Play of the Front Linkage Pin on Certain Excavators {6501, 6502, 6513}
2010/12/08
Improved Pin Assemblies and Bushings for the Boom, the Stick, and the Bucket Pin Joints Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458, 6501, 6502, 6513}
2013/06/20
A New Procedure is Available to Improve the Durability of the Reach Sticks on Certain Excavators {6502}
2011/03/16
A Procedure is Now Used to Install Mounting Blocks for the Auxiliary Lines on Sticks for Certain Excavators {0679, 6502}
2011/09/29
311D to 390D Excavator Front Linkage Bushing Diameter {6001, 6501, 6502, 6513, 6700}
2013/03/04
A New Stick and Bearing Assembly is Now Used on Certain 330D and 336D Excavators {6502}
2014/03/17
A New Steel Bushing for the Stick Nose is Now Available for Certain Excavators {6502}
A New Steel Bushing for the Stick Nose is Now Available for Certain Excavators {6502}

Caterpillar Parts SIS Catalog 330D L :

STICK GP-HOE
290-9284 STICK GP-HOE
STICK GP-HOE
290-9275 STICK GP-HOE
STICK GP-HOE
290-9263 STICK GP-HOE
STICK GP-HOE
290-9263 STICK GP-HOE
STICK GP-HOE
290-9251 STICK GP-HOE
STICK GP-HOE
290-9251 STICK GP-HOE
STICK GP-HOE
289-8274 STICK GP-HOE
STICK GP-HOE
285-3023 STICK GP-HOE
STICK GP-HOE
290-9318 STICK GP-HOE
SUPPORT AR-BOOM & STICK
252-8233 SUPPORT AR-BOOM & STICK
SUPPORT GP-BOOM
217-5029 SUPPORT GP-BOOM
SUPPORT GP-BOOM
217-5030 SUPPORT GP-BOOM
SUPPORT GP-BOOM
252-8219 SUPPORT GP-BOOM
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL
ACTUATOR GP-CLAMSHELL
275-4873 ACTUATOR GP-CLAMSHELL

Truck sale:

Caterpillar 330DL, Construction
130,000 
Caterpillar 330DL, Construction
- Crawler Excavators
WYOMING MACHINERY
 
 
Caterpillar 330DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 330DL, Construction
56,700 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 330DL, Construction
 
Caterpillar 330DL, Construction
- Crawler Excavators
MANTRAC GHANA LIMITED
Ghana
Caterpillar 330DL, Construction
73,710 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.