HYDRAULIC SYSTEM
TANK GPVALVE GP-PILOT
VALVE GP-CHECK
VALVE GP-CONTROL
HYDRAULIC SYSTEM
TANK GP
#SEBP49230460
227-0566: TANK & FILTER GP-HYDRAULIC
227-0566 TANK & FILTER GP-HYDRAULIC
S/N PAL1-UP
PART OF 227-0565 TANK & MTG GP-HYDRAULIC
Type 2
S/N PAL1-UP
PART OF 227-0565 TANK & MTG GP-HYDRAULIC
Type 2
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 2. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 3. | 292-7299 C | [1] | SUPPORT AS | |
| 4. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 7. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 8. | 8T-4136 CM | [3] | BOLT (M10X1.5X25-MM) | |
| 9. | 8T-4121 C | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8C-3451 | [1] | CAP-DUST (HYDRAULIC OIL) | |
| 11. | 6V-0852 | [1] | CAP-DUST | |
| 12. | 275-1362 | [1] | BRACKET | |
| 13. | 289-8194 CY | [1] | FILTER GP-OIL (HYDRAULIC, CASE DRAIN) | |
| 14. | 158-8987 Y | [1] | FILTER & VALVE GP-PILOT (HYDRAULIC OIL) | |
| 15. | 6J-2680 | [1] | SEAL-O-RING | |
| 16. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 17. | 164-5590 | [1] | VALVE AS-FLUID SAMPLING (HYDRAULIC OIL) | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 8C-3446 | [1] | VALVE-SAMPLING (HYDRAULIC OIL) | ||
| 18. | 8T-7971 C | [2] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 19. | 188-4140 Y | [1] | FILTER GP-OIL (HYDRAULIC RETURN) | |
| 20. | 289-5564 Y | [1] | TANK GP-HYDRAULIC | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49230461
227-0565: TANK & MTG GP-HYDRAULIC
For full view, you need register
#SEBP49230462
289-5564: TANK GP-HYDRAULIC
289-5564 TANK GP-HYDRAULIC
S/N PAL1-UP
260-L (69-US GAL)
PART OF 227-0566 TANK & FILTER GP-HYDRAULIC
S/N PAL1-UP
260-L (69-US GAL)
PART OF 227-0566 TANK & FILTER GP-HYDRAULIC
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 342-2924 | [1] | SENDER AS-TEMPERATURE (HYDRAULIC OIL) | |
| 095-0826 | [2] | LOCKWASHER | ||
| 095-7930 M | [2] | SCREW-MACHINE (M4X0.7X6-MM) | ||
| 2. | 6I-0723 | [1] | PLUG-OIL DRAIN (HYDRAULIC TANK) | |
| 3. | 6I-0724 | [1] | ADAPTER-PLUG | |
| 4. | 213-0677 | [1] | SWITCH AS-LIQUID LEVEL (HYDRAULIC OIL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 227-0590 | [1] | BREATHER (HYDRAULIC TANK) | |
| 6. | 227-0620 Y | [1] | GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL) | |
| 8. | 236-3170 | [1] | COVER AS | |
| 9. | 259-0922 Y | [1] | SCREEN GP-HYDRAULIC (TANK) | |
| 10. | 207-6403 | [1] | PLUG | |
| 11. | 207-6404 | [1] | WASHER (49.5X60.5X1.5-MM THK) | |
| 12. | 095-1608 | [1] | SEAL-O-RING | |
| 13. | 095-1735 | [1] | SEAL-O-RING | |
| 14. | 165-3256 | [1] | PIPE AS | |
| 15. | 3D-2824 | [1] | SEAL-O-RING | |
| 16. | 3K-0360 | [1] | SEAL-O-RING | |
| 17. | 4J-0527 | [1] | SEAL-O-RING | |
| 18. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 19. | 5P-8068 | [1] | SEAL-O-RING | |
| 20. | 6D-9157 | [1] | SEAL-O-RING | |
| 21. | 8T-0267 M | [2] | BOLT-SOCKET HEAD (M6X1X12-MM) | |
| 22. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 24. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 26. | 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | |
| 27. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49230463
255-5726: VALVE AR-ALT PATTERN CONTROL
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 247-7490 Y | [1] | FILM GP (ALT PATTERN CONTROL, WARNING) | ||
| -OR- | ||||
| 354-1028 Y | [1] | FILM GP (ALT PATTERN CONTROL, WARNING)(ALT PATTERN CONTROL, WARNING) | ||
| 255-1657 Y | [1] | LINES GP-PILOT (ALT PATTERN CONTROL, 2-WAY) | ||
| -OR- | ||||
| 354-3727 Y | [1] | LINES GP-PILOT (ALT PATTERN CONTROL, 2-WAY) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49230464
173-4672: VALVE GP-CHECK
173-4672 VALVE GP-CHECK -OIL COOLER BYPASS
S/N PAL1-UP
PART OF 248-9831 LINES GP-CONTROL
S/N PAL1-UP
PART OF 248-9831 LINES GP-CONTROL
For full view, you need register
#SEBP49230465
239-8825: VALVE GP-CONTROL
239-8825 VALVE GP-CONTROL -WITHOUT COVERS, HOUSINGS
S/N PAL1-UP
PART OF 259-7432 VALVE GP-CONTROL
S/N PAL1-UP
PART OF 259-7432 VALVE GP-CONTROL
For full view, you need register
#SEBP49230466
239-8826: VALVE GP-CONTROL
239-8826 VALVE GP-CONTROL -WITHOUT COVERS, HOUSINGS
S/N PAL1-UP
PART OF 255-5652 VALVE GP-CONTROL
S/N PAL1-UP
PART OF 255-5652 VALVE GP-CONTROL
For full view, you need register
#SEBP49230467
255-5652: VALVE GP-CONTROL
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-2274 | [5] | COVER | |
| 2. | 6E-5731 | [4] | VALVE (LOAD CHECK) | |
| 3. | 7I-1248 | [5] | SPRING | |
| 4. | 153-5286 | [1] | VALVE (LOAD CHECK) | |
| 5. | 153-5288 | [1] | SPRING | |
| 6. | 153-5289 | [1] | GUIDE | |
| 7. | 153-5290 | [1] | PLUG | |
| 8. | 153-5291 | [1] | CONNECTOR | |
| 9. | 153-5292 | [1] | VALVE-CHECK | |
| 10. | 153-5293 | [1] | SPRING | |
| 11. | 158-8159 | [5] | HOUSING | |
| 12. | 236-6419 | [5] | PLUG | |
| 13. | 236-6421 | [1] | PLUG | |
| 14. | 239-8826 Y | [1] | VALVE GP-CONTROL (WITHOUT COVERS, HOUSINGS) | |
| 15. | 255-5661 Y | [3] | VALVE GP-RELIEF (LINE) | |
| 16. | 095-1590 | [5] | SEAL-O-RING | |
| 17. | 095-1787 | [5] | RING-BACKUP | |
| 18. | 109-5152 Y | [1] | VALVE GP-RELIEF (NEGATIVE FLOW CONTROL) | |
| 19. | 111-9959 | [1] | PLUG-PIPE | |
| 20. | 2M-9780 | [1] | SEAL-O-RING | |
| 21. | 4I-6397 | [1] | RING-BACKUP | |
| 22. | 4J-0520 | [2] | SEAL-O-RING | |
| 23. | 6E-4816 Y | [2] | PLUG GP-CONTROL VALVE | |
| 24. | 6V-3922 | [1] | SEAL-O-RING | |
| 25. | 6V-5597 | [10] | SEAL-O-RING | |
| 26. | 7M-8485 | [1] | SEAL-O-RING | |
| 27. | 7Y-8099 | [2] | COVER | |
| 28. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4195 M | [28] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49230468
259-7432: VALVE GP-CONTROL
For full view, you need register
Parts for your 325D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-3148 | [3] | SPRING | |
| 2. | 6E-2274 | [5] | COVER | |
| 3. | 6E-5169 | [1] | SPRING | |
| 4. | 7I-1248 | [1] | SPRING | |
| 5. | 121-1491 Y | [1] | VALVE GP-SOLENOID (STRAIGHT TRAVEL) | |
| 6. | 153-5288 | [1] | SPRING | |
| 7. | 153-5289 | [1] | GUIDE | |
| 8. | 153-5290 | [2] | PLUG | |
| 9. | 153-5291 | [1] | CONNECTOR | |
| 10. | 153-5292 | [1] | VALVE-CHECK | |
| 11. | 153-5293 | [1] | SPRING | |
| 12. | 153-5295 Y | [1] | VALVE GP-PRIORITY (SWING) | |
| 13. | 153-5298 | [1] | SLEEVE | |
| 14. | 153-5299 | [1] | VALVE | |
| 15. | 153-5306 | [1] | SPRING | |
| 16. | 153-5309 | [1] | SLEEVE | |
| 17. | 153-5311 | [1] | SPRING | |
| 18. | 158-8150 | [1] | VALVE GP-UNLOADING (STICK) | |
| 19. | 158-8159 | [4] | HOUSING | |
| 20. | 158-8206 | [1] | HOUSING | |
| 21. | 158-8207 | [1] | STOPPER | |
| 22. | 165-9595 | [1] | COVER | |
| 23. | 201-9263 | [2] | PLUG | |
| 24. | 222-4737 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 4J-7533 | [1] | SEAL-O-RING | ||
| 9S-4180 | [1] | PLUG | ||
| 25. | 236-6419 | [1] | PLUG | |
| 26. | 236-6421 | [1] | PLUG | |
| 27. | 264-9961 | [1] | PLUG | |
| 28. | 239-8774 Y | [1] | VALVE GP-RELIEF (MAIN, HEAVY LIFT) | |
| 29. | 239-8825 Y | [1] | VALVE GP-CONTROL (WITHOUT COVERS, HOUSINGS) | |
| 30. | 250-2446 | [1] | PLUG | |
| 31. | 250-2447 | [1] | PLUG | |
| 32. | 255-5661 Y | [1] | VALVE GP-RELIEF (LINE) | |
| 33. | 095-1575 | [1] | SEAL-O-RING | |
| 34. | 095-1590 | [3] | SEAL-O-RING | |
| 35. | 095-1603 | [1] | SEAL-O-RING | |
| 36. | 095-1778 | [1] | RING-BACKUP | |
| 37. | 095-1787 | [3] | RING-BACKUP | |
| 38. | 103-8173 | [1] | SEAL-O-RING | |
| 39. | 103-8177 | [1] | ADAPTER | |
| 40. | 123-2485 | [1] | PLUG | |
| 41. | 2M-9780 | [1] | SEAL-O-RING | |
| 42. | 3J-1907 | [1] | SEAL-O-RING | |
| 43. | 4I-3569 | [1] | RING-BACKUP | |
| 44. | 4I-6397 | [3] | RING-BACKUP | |
| 45. | 4J-5309 | [1] | SEAL-O-RING | |
| 46. | 4T-5074 | [1] | RING-BACKUP | |
| 47. | 6E-3653 | [1] | PLUG | |
| 48. | 6E-5643 | [3] | VALVE (LOAD CHECK) | |
| 49. | 6E-5731 | [1] | VALVE (LOAD CHECK) | |
| 50. | 6V-3922 | [3] | SEAL-O-RING | |
| 51. | 6V-5393 | [1] | SEAL-O-RING | |
| 52. | 6V-5556 | [1] | SEAL-O-RING | |
| 53. | 6V-5597 | [9] | SEAL-O-RING | |
| 54. | 7I-2272 M | [2] | BOLT (M5X0.8X12-MM) | |
| 55. | 7M-8485 | [2] | SEAL-O-RING | |
| 56. | 7X-2621 M | [1] | BOLT (M10X1.5X12-MM) | |
| 57. | 7Y-5219 | [1] | SEAL-O-RING | |
| 58. | 8T-4121 | [24] | WASHER-HARD (11X21X2.5-MM THK) | |
| 59. | 8T-4195 M | [20] | BOLT (M10X1.5X30-MM) | |
| 60. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 61. | 8T-6759 | [2] | PLUG-PIPE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49230469
340-3327: VALVE GP-CONTROL
340-3327 VALVE GP-CONTROL -QUICK COUPLER
S/N PAL1-UP
PART OF 451-9080 LINES GP-FRONT
AN ATTACHMENT
S/N PAL1-UP
PART OF 451-9080 LINES GP-FRONT
AN ATTACHMENT
For full view, you need register
