AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

330D L Excavator HAS00001-UP (MACHINE) POWERED BY C9 Engine BASIC ENGINE Caterpillar SIS



EXCAVATOR 330D L EXCAVATOR HAS
 330D L Excavator HAS00001-UP (MACHINE) POWERED BY C9 Engine SEBP4928 330D L HAS   (2006)

Parts group 330D L:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
242-0674 CAMSHAFT GP
242-0674 CAMSHAFT GP
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
CRANKSHAFT GP
CRANKSHAFT GP
164-6148 CRANKSHAFT GP
164-6148 CRANKSHAFT GP
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
SEAL GP-CRANKSHAFT
178-3899 SEAL GP-CRANKSHAFT
178-3899 SEAL GP-CRANKSHAFT
S/N THY1-UP
PART OF 224-9843 ENGINE AR
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
202-3301 COVER GP-CYLINDER BLOCK
202-3301 COVER GP-CYLINDER BLOCK -CRANKCASE
S/N THY1-UP
PART OF 224-9843 ENGINE AR
CYLINDER BLOCK AS
325-3915 CYLINDER BLOCK AS
325-3915 CYLINDER BLOCK AS
S/N THY1-UP
PART OF 517-1908 CYLINDER BLOCK AS
CYLINDER BLOCK AS
517-1908 CYLINDER BLOCK AS
517-1908 CYLINDER BLOCK AS
S/N THY1-UP
PART OF 161-3406 CYLINDER BLOCK GP
CYLINDER BLOCK GP
161-3406 CYLINDER BLOCK GP
161-3406 CYLINDER BLOCK GP
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
297-4841 KIT-SEAL
297-4841 KIT-SEAL -SINGLE FUEL INJECTOR
S/N HAS1-UP
FOR USE WITH @@@@@224-9843@@@@@
FIELD INSTALLATION
PLUG GP-ENGINE
169-3105 PLUG GP-ENGINE
169-3105 PLUG GP-ENGINE
S/N THY1-UP
PART OF 224-9843 ENGINE AR
CYLINDER HEAD GP
CYLINDER HEAD AS
252-8438 CYLINDER HEAD AS
252-8438 CYLINDER HEAD AS
S/N THY1-UP
PART OF 252-8439 CYLINDER HEAD GP
CYLINDER HEAD AS
311-7229 CYLINDER HEAD AS
311-7229 CYLINDER HEAD AS
S/N THY1-UP
PART OF 252-8439 CYLINDER HEAD GP
CYLINDER HEAD AS
332-3619 CYLINDER HEAD AS
332-3619 CYLINDER HEAD AS
S/N THY1-UP
PART OF 252-8439 CYLINDER HEAD GP
CYLINDER HEAD GP
242-0672 CYLINDER HEAD GP
242-0672 CYLINDER HEAD GP
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
FOR USE WITH ENGINES THAT DO NOT REQUIRE SMART WASTE GATE
CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
S/N THY1-UP
PART OF 242-0672 CYLINDER HEAD GP
Type 1
CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
S/N THY1-UP
PART OF 242-0672 CYLINDER HEAD GP
Type 2
CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
252-8439 CYLINDER HEAD GP
S/N THY1-UP
PART OF 242-0672 CYLINDER HEAD GP
Type 3
FASTENER GP-CYLINDER HEAD
167-0171 FASTENER GP-CYLINDER HEAD
167-0171 FASTENER GP-CYLINDER HEAD
S/N THY1-UP
PART OF 213-4363 FASTENER GP-CYLINDER HEAD
FASTENER GP-CYLINDER HEAD
213-4363 FASTENER GP-CYLINDER HEAD
213-4363 FASTENER GP-CYLINDER HEAD
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
Type 1
FASTENER GP-CYLINDER HEAD
213-4363 FASTENER GP-CYLINDER HEAD
213-4363 FASTENER GP-CYLINDER HEAD
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
Type 2
FASTENER GP-VALVE COVER BASE
233-0423 FASTENER GP-VALVE COVER BASE
233-0423 FASTENER GP-VALVE COVER BASE
S/N THY1-UP
PART OF 224-9843 ENGINE AR
PLUG GP-ENGINE
169-3105 PLUG GP-ENGINE
169-3105 PLUG GP-ENGINE
S/N THY1-UP
PART OF 224-9843 ENGINE AR
DAMPER GP
DAMPER & PULLEY GP
165-4557 DAMPER & PULLEY GP
165-4557 DAMPER & PULLEY GP
S/N THY1-UP
PROVIDES VISCOUS DAMPER W/8 GROOVE POLY-RIB PULLEY
PART OF 224-9843 ENGINE AR
FASTENER GP-DAMPER & PULLEY
218-0859 FASTENER GP-DAMPER & PULLEY
218-0859 FASTENER GP-DAMPER & PULLEY
S/N THY1-UP
PART OF 224-9843 ENGINE AR
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
241-7605 DRIVE GP-ACCESSORY
241-7605 DRIVE GP-ACCESSORY
S/N THY1-UP
PART OF 224-9843 ENGINE AR
DRIVE GP-FAN
DRIVE GP-FAN
137-3750 DRIVE GP-FAN
137-3750 DRIVE GP-FAN
S/N HAS1-UP
PART OF 230-2899 FAN GP-SUCTION
ENGINE GP
428-9317 KIT-ENGINE GASKET
428-9317 KIT-ENGINE GASKET
S/N HAS1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP & ATTACHING LINES
FOR USE WITH REHS7938, REHS7939 & REHS7940
FIELD INSTALLATION
437-3247 KIT-ENGINE GASKET
437-3247 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE
S/N HAS1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP & BLOCK COVERS
FIELD REPLACEMENT FOR 338-3549 KIT-GASKET
FOR USE WITH @@@@@224-9843@@@@@
FIELD INSTALLATION
450-2548 KIT-ENGINE GASKET
450-2548 KIT-ENGINE GASKET
S/N HAS1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES.. KIT INCLUDES THE TURBO MOUNTING HARDWARE.
FOR USE WITH @@@@@224-9843@@@@@
FIELD INSTALLATION
459-0538 KIT-ENGINE GASKET
459-0538 KIT-ENGINE GASKET
S/N HAS1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FIELD INSTALLATION
FASTENER GP-ENGINE
FASTENER GP-VALVE COVER
236-7315 FASTENER GP-VALVE COVER
236-7315 FASTENER GP-VALVE COVER
S/N THY1-UP
PART OF 224-9843 ENGINE AR
FLYWHEEL GP
FLYWHEEL GP
102-3596 FLYWHEEL GP
102-3596 FLYWHEEL GP
S/N THY1-UP
PART OF 224-9843 ENGINE AR
GEAR GP
GEAR GP-FRONT
205-1321 GEAR GP-FRONT
205-1321 GEAR GP-FRONT
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
HOUSING GP-FRONT
245-3260 HOUSING GP-FRONT
245-3260 HOUSING GP-FRONT
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
S/N THY1-UP
LEFT STARTER BORE
PART OF 224-9843 ENGINE AR
HOUSING GP-FLYWHEEL
229-3568 HOUSING GP-FLYWHEEL
229-3568 HOUSING GP-FLYWHEEL
S/N THY1-UP
PART OF 224-9843 ENGINE AR
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
118-1727 COVER GP-FRONT HOUSING
118-1727 COVER GP-FRONT HOUSING -ACCESSORY DRIVE
S/N THY1-UP
REQUIRED ON ENGINES WITH NO FACTORY INSTALLED AIR COMPRESSOR
PART OF 224-9843 ENGINE AR
COVER GP-FRONT HOUSING
211-3285 COVER GP-FRONT HOUSING
211-3285 COVER GP-FRONT HOUSING
S/N THY1-UP
PART OF 224-9843 ENGINE AR
FASTENER GP-FRONT HOUSING
116-4556 FASTENER GP-FRONT HOUSING
116-4556 FASTENER GP-FRONT HOUSING
S/N THY1-UP
PART OF 224-9843 ENGINE AR
CANNOT BE USED WITH FRONT ENGINE SUPPORT
GEAR GP-FRONT
205-1321 GEAR GP-FRONT
205-1321 GEAR GP-FRONT
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
HOUSING GP-FRONT
245-3260 HOUSING GP-FRONT
245-3260 HOUSING GP-FRONT
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
439-8620 KIT-FRONT COVER GASKET
439-8620 KIT-FRONT COVER GASKET
S/N HAS1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@224-9843@@@@@
FIELD INSTALLATION
LIFTING GP-ENGINE
LIFTING GP-ENGINE
191-3063 LIFTING GP-ENGINE
191-3063 LIFTING GP-ENGINE
S/N THY1-UP
PART OF 224-9843 ENGINE AR
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
239-6474 MOUNTING GP-ENGINE
239-6474 MOUNTING GP-ENGINE
S/N HAS1-UP
PART OF 279-7825 INSTALLATION AR-ENGINE
PAN GP-OIL
PAN GP-OIL
187-0472 PAN GP-OIL
187-0472 PAN GP-OIL -ENGINE
S/N THY1-UP
PART OF 224-9843 ENGINE AR
PISTON & ROD GP
PISTON & ROD GP
265-1400 PISTON & ROD GP
265-1400 PISTON & ROD GP
S/N THY1-UP
16.1:1 COMPRESSION RATIO
PART OF 229-2665 ENGINE AR-CORE
PULLEY GP
FASTENER GP-DAMPER & PULLEY
218-0859 FASTENER GP-DAMPER & PULLEY
218-0859 FASTENER GP-DAMPER & PULLEY
S/N THY1-UP
PART OF 224-9843 ENGINE AR
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
235-8174 COVER GP-VALVE MECHANISM
235-8174 COVER GP-VALVE MECHANISM
S/N THY1-UP
PART OF 224-9843 ENGINE AR
Type 1
COVER GP-VALVE MECHANISM
235-8174 COVER GP-VALVE MECHANISM
235-8174 COVER GP-VALVE MECHANISM
S/N THY1-UP
PART OF 224-9843 ENGINE AR
Type 2
FASTENER GP-VALVE COVER
236-7315 FASTENER GP-VALVE COVER
236-7315 FASTENER GP-VALVE COVER
S/N THY1-UP
PART OF 224-9843 ENGINE AR
FASTENER GP-VALVE COVER BASE
233-0423 FASTENER GP-VALVE COVER BASE
233-0423 FASTENER GP-VALVE COVER BASE
S/N THY1-UP
PART OF 224-9843 ENGINE AR
ROCKER ARM GP
213-9320 ROCKER ARM GP
213-9320 ROCKER ARM GP -EXHAUST
S/N THY1-UP
PART OF 212-8926 VALVE MECHANISM GP
ROCKER ARM GP
242-0329 ROCKER ARM GP
242-0329 ROCKER ARM GP -INLET
S/N THY1-UP
PART OF 212-8926 VALVE MECHANISM GP
VALVE MECHANISM GP
212-8926 VALVE MECHANISM GP
212-8926 VALVE MECHANISM GP
S/N THY1-UP
PART OF 242-0447 VALVE MECHANISM GP
VALVE MECHANISM GP
242-0447 VALVE MECHANISM GP
242-0447 VALVE MECHANISM GP
S/N THY1-UP
PART OF 229-2665 ENGINE AR-CORE
HOUSING GP-REAR
448-1642 KIT-REAR COVER GASKET
448-1642 KIT-REAR COVER GASKET
S/N HAS1-UP
KIT INCLUDES GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER.. KIT DOES NOT INCLUDES THE OIL PAN GASKET.
FOR USE WITH @@@@@224-9843@@@@@
FIELD INSTALLATION
COVER GP-ENGINE
439-8620 KIT-FRONT COVER GASKET
439-8620 KIT-FRONT COVER GASKET
S/N HAS1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@224-9843@@@@@
FIELD INSTALLATION

Information:

(For parts list, see above)

Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Specifications
Belt Tensioner
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Belt Tightener - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Belt Tightener - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Specifications
Camshaft
C9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C9 Engines for Caterpillar Built Machines
Camshaft - Remove
C9 Engines for Caterpillar Built Machines
Camshaft - Install
C9 Engines for Caterpillar Built Machines
Service Magazine
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Specifications
Refrigerant Compressor
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Refrigerant Compressor
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Engine News
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
Specifications
Crankshaft Seals
C9 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C9 Engines for Caterpillar Built Machines
Main Bearing Journal
C9 Engines for Caterpillar Built Machines
Crankshaft
C9 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C9 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C9 Engines for Caterpillar Built Machines
Crankshaft - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft - Install
C9 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Crankshaft Front Seal - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Crankshaft Main Bearings - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C9 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C9 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C9 Engines for Caterpillar Built Machines
Crankshaft Vibration Damper and Pulley - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Crankshaft Vibration Damper and Pulley - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Improved Crankshaft Rear Seals are Used on Certain C9 Machine Engines {1161, 7555}
2015/08/12
Improved Crankshafts are Now Used on Certain Cat<SUP>&reg;</SUP> Products {1202}
Improved Crankshafts are Now Used on Certain Cat® Products {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Servicing the Pistons, Rings, and Liners in Certain C9 Engines{1213, 1215}
Servicing the Pistons, Rings, and Liners in Certain C9 Engines{1213, 1215}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Specifications
Cylinder Block
C9 Engines for Caterpillar Built Machines
Cylinder Liner
C9 Engines for Caterpillar Built Machines
Main Bearing Journal
C9 Engines for Caterpillar Built Machines
Cylinder Liner Projection
C9 Engines for Caterpillar Built Machines
Cylinder Block Cover Group
C9 Engines for Caterpillar Built Machines
Piston Cooling Jet
C9 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C9 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C9 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C9 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Crankshaft Front Seal - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Crankshaft Main Bearings - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C9 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C9 Engines for Caterpillar Built Machines
Cylinder Block Cover - Remove and Install
C9 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Valve Lash - Check
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Technical Information Bulletin
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
Specifications
Cylinder Head Valves
C9 Engines for Caterpillar Built Machines
Cylinder Head Valves
C9 Engines for Caterpillar Built Machines
Cylinder Head Valves
C9 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Rocker Arm and Shaft - Remove
C9 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C9 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
C9 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
C9 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C9 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C9 Engines for Caterpillar Built Machines
Cylinder Head - Remove
C9 Engines for Caterpillar Built Machines
Cylinder Head - Install
C9 Engines for Caterpillar Built Machines
Service Magazine
A New O-ring for the Injector Sleeve is Now Used {1100}
2007/12/24
A New Plug Assembly Is Used on the Cylinder Head of Certain Machines Engines {1100}
2008/02/25
Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
2009/08/10
A New Intake Valve Is Now Used {1100}
2009/11/05
Specifications
Vibration Damper and Pulley
C9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C9 Engines for Caterpillar Built Machines
Specifications
Accessory Drive
C9 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC FAN MOTOR ON CERTAIN 330D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING TWO PLUGS FROM THE HYDRAULIC FAN MOTOR ON CERTAIN 330D EXCAVATORS
Service Letter-CSARL
Specifications
Fan Drive
C9 Engines for Caterpillar Built Machines
Troubleshooting
MID 039 - CID 0362 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0362 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0362 - FMI 06
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0544 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Disassembly and Assembly
Fan Drive - Remove
C9 Engines for Caterpillar Built Machines
Fan Drive - Install
C9 Engines for Caterpillar Built Machines
Fan Drive - Disassemble
C9 Engines for Caterpillar Built Machines
Fan Drive - Assemble
C9 Engines for Caterpillar Built Machines
Fan Drive - Disassemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Fan Drive - Assemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Fan Drive - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Fan Drive - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Service Magazine
A New Lip Type Seal Is Available for the Fan Drive Group {1359}
2008/05/12
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel Housing
C9 Engines for Caterpillar Built Machines
Flywheel
C9 Engines for Caterpillar Built Machines
Flywheel
C9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove
C9 Engines for Caterpillar Built Machines
Flywheel - Install
C9 Engines for Caterpillar Built Machines
Flywheel - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Rear) - Remove and Install
C9 Engines for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Specifications
Flywheel Housing Cover
C9 Engines for Caterpillar Built Machines
Flywheel Housing
C9 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C9 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C9 Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install
C9 Engines for Caterpillar Built Machines
Specifications
Crankshaft Seals
C9 Engines for Caterpillar Built Machines
Front Housing and Covers
C9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Housing (Front) - Remove
C9 Engines for Caterpillar Built Machines
Housing (Front) - Install
C9 Engines for Caterpillar Built Machines
Front Cover - Remove
C9 Engines for Caterpillar Built Machines
Front Cover - Install
C9 Engines for Caterpillar Built Machines
Technical Information Bulletin
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Service Letter-NACD
Product Improvement Program To Inspect And Replace If Necessary The 139-8736 Engine Mount On Certain 330D And 345C Excavators
Product Improvement Program To Inspect And Replace If Necessary The 139-8736 Engine Mount On Certain 330D And 345C Excavators
Service Letter-CSARL
Specifications
Engine Mounting
330D and 336D Excavators and 330D Material Handlers Machine System Specifications
Disassembly and Assembly
Engine Front Mount - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Engine Front Mount - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Engine Rear Mount - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Engine Rear Mount - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Operation and Maintenance Manual
Engine Oil Level - Check
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Engine Oil and Filter - Change
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Specifications
Engine Oil Pan
C9 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C9 Engines for Caterpillar Built Machines
Oil Pan - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Service Magazine
Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31
Special Instruction
Replacement of the Double Notch Piston Skirts on C9 Engines{1225}
Replacement of the Double Notch Piston Skirts on C9 Engines{1225}
Servicing the Pistons, Rings, and Liners in Certain C9 Engines{1213, 1215}
Servicing the Pistons, Rings, and Liners in Certain C9 Engines{1213, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod Bearing Journal
C9 Engines for Caterpillar Built Machines
Connecting Rod
C9 Engines for Caterpillar Built Machines
Piston Cooling Jet
C9 Engines for Caterpillar Built Machines
Piston and Rings
C9 Engines for Caterpillar Built Machines
Piston and Rings
C9 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C9 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C9 Engines for Caterpillar Built Machines
Compression - Test
C9 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C9 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C9 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C9 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C9 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C9 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C9 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C9 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C9 Engines for Caterpillar Built Machines
Service Magazine
A New Single Notched Piston Skirt Is Now Used {1225}
2014/10/15
Specifications
Vibration Damper and Pulley
C9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C9 Engines for Caterpillar Built Machines
Crankshaft Vibration Damper and Pulley - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Crankshaft Vibration Damper and Pulley - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Operation and Maintenance Manual
Engine Valve Lash - Check
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Technical Information Bulletin
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Specifications
Valve Mechanism Cover
C9 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C9 Engines for Caterpillar Built Machines
Valve Mechanism
C9 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C9 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C9 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C9 Engines for Caterpillar Built Machines
Troubleshooting
Excessive Valve Lash
C7 and C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
C9 Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
C9 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C9 Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
C9 Engines for Caterpillar Built Machines
Rocker Arm - Assemble
C9 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C9 Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
C9 Engines for Caterpillar Built Machines
Service Magazine
A New Guide Spring for the Camshaft Lifter is Now Used {1102}
2008/03/17
An Improved Guide Spring and Valve Lifter Assembly Are Used in Certain Machines Equipped with C-9, C9 ACERT Engines, and C9.3 ACERT Engines {1104, 1108}
2012/05/03
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Information Release Memo
ENGINE OVERHAUL KITS FOR C-9 MACHINE ENGINES
ENGINE OVERHAUL KITS FOR C-9 MACHINE ENGINES

Truck sale:

Caterpillar 330DL, Construction
130,000 
Caterpillar 330DL, Construction
- Crawler Excavators
WYOMING MACHINERY
 
 
Caterpillar 330DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 330DL, Construction
56,700 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 330DL, Construction
 
Caterpillar 330DL, Construction
- Crawler Excavators
MANTRAC GHANA LIMITED
Ghana
Caterpillar 330DL, Construction
73,710 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.