AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

330D L Excavator HAS00001-UP (MACHINE) POWERED BY C9 Engine WORK TOOLS Caterpillar SIS



EXCAVATOR 330D L EXCAVATOR HAS
 330D L Excavator HAS00001-UP (MACHINE) POWERED BY C9 Engine SEBP4928 330D L HAS   (2006)

Parts group 330D L:

  For full view, you need register
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
TIP GP-GENERAL PURPOSE
309-1127 TIP GP-GENERAL PURPOSE
309-1127 TIP GP-GENERAL PURPOSE -K-110
S/N HAS1-UP
AN ATTACHMENT
TIP GP-HEAVY ABRASION
309-1129 TIP GP-HEAVY ABRASION
309-1129 TIP GP-HEAVY ABRASION -K-110
S/N HAS1-UP
AN ATTACHMENT
TIP GP-PENETRATION
309-1123 TIP GP-PENETRATION
309-1123 TIP GP-PENETRATION -K-110
S/N HAS1-UP
AN ATTACHMENT

Information:

(For parts list, see above)

Service Magazine
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2012/05/18
Operation and Maintenance Manual
Work Tool Changing
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Boom, Stick and Bucket Operation
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Quick Coupler - Lubricate - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Boom/Stick/Bucket Combinations
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Bucket - Remove and Install
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Quick Coupler Operation - Circuit for Universal Coupler (If Equipped)
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Modification of Hydraulic Excavator Buckets from D Family Linkage to DB Family Linkage{6503, 6513, 6700}
Modification of Hydraulic Excavator Buckets from D Family Linkage to DB Family Linkage{6503, 6513, 6700}
Installation of the 282-4232 Sleeve Bushing Gp (KIT){6513}
Installation of the 282-4232 Sleeve Bushing Gp (KIT){6513}
Rework Procedure for Weld Cracks of B, CB, DB and TB Buckets for Certain Excavators{0679, 6112, 6132, 6503, 6519, 6525}
Rework Procedure for Weld Cracks of B, CB, DB and TB Buckets for Certain Excavators{0679, 6112, 6132, 6503, 6519, 6525}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Bucket - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
Installation Procedure For The K Series Drive Through Tooth System {6805, 6822}
2007/11/26
Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
2008/08/25
A Rework Procedure for Weld Cracks of B, CB, DB and TB Buckets is Now Available {0679, 6112, 6132, 6503, 6519, 6525}
2009/03/23
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New Improved 122 cm (48 inch) and Wider General Duty Buckets and Wide Tip General Duty Buckets for use with TB Linkage Are Available on Certain 336D/E/F-ME, 345D, and 349E/F Excavators {6503, 6513}
2015/07/13
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
Operation and Maintenance Manual
Quick Coupler Operation - Circuit for Universal Coupler (If Equipped)
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
Connector Lines for Hydraulic Pin Grabber Quick Couplers on Excavators {5057, 6129, 7000}
2006/07/31
A New Pin Retainer is Available for the Pin Grabber Quick Coupler Used on 330D and the 336D L Excavators {6129}
2011/04/26
Lifting Eye Check and Rework for Couplers on Certain Hydraulic Excavators {6129}
2013/11/08
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
Operation and Maintenance Manual
Bucket Tips - Inspect/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Bucket Tips - Inspect/Replace - Drive-through System
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Bucket Tips - Inspect/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Special Instruction
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Technical Information Bulletin
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Retainer Installation Procedure For The K-Series Bucket Tips{6805, 6822}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Installation Procedure For The K Series Drive Through Tooth System {6805, 6822}
2007/11/26
K110 Tip and Retention Improvement {6803, 6805}
2008/05/26
Improved K110 Adapters are now available for Wheel Loaders and Excavators {6800}
2008/08/25
K Series Bucket Tip Slag Retainers For High Temperature Applications are Available {6805}
2009/01/26
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
Disassembly and Assembly
System Pressure - Release
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Special Instruction
Procedures for the Repair of Cracks in Reach Booms{6000, 6501}
Procedures for the Repair of Cracks in Reach Booms{6000, 6501}
Installation of the 282-4232 Sleeve Bushing Gp (KIT){6513}
Installation of the 282-4232 Sleeve Bushing Gp (KIT){6513}
Service Magazine
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
Special Instruction
Installation Procedure for Mounting Hydraulic Thumbs with Tool Bars{6547}
Installation Procedure for Mounting Hydraulic Thumbs with Tool Bars{6547}
Installation Procedure for <NOBR>378-2347</NOBR>, <NOBR>378-2486</NOBR>, <NOBR>378-2433</NOBR>, <NOBR>378-2467</NOBR> Bracket As for Stiff-Link Thumbs {0679, 6547}
Installation Procedure for 378-2347, 378-2486, 378-2433, 378-2467 Bracket As for Stiff-Link Thumbs {0679, 6547}

Truck sale:

Caterpillar 330DL, Construction
130,000 
Caterpillar 330DL, Construction
- Crawler Excavators
WYOMING MACHINERY
 
 
Caterpillar 330DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 330DL, Construction
56,700 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 330DL, Construction
 
Caterpillar 330DL, Construction
- Crawler Excavators
MANTRAC GHANA LIMITED
Ghana
Caterpillar 330DL, Construction
73,710 
Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.