341-2807 CYLINDER & SEAL GP-STICK S/N BZF1-UP; EAX1-UP 140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE FIELD REPLACEMENT FOR @@@@@349-4130@@@@@ 320D FM

HYDRAULIC SYSTEM

CYLINDER GP

0. 341-2807 CYLINDER &
1. 349-4130 CYLINDER &
2. 263-2914 CYLINDER G

DRIVE GP

3. 191-5537 DRIVE GP-A
4. 290-1912 DRIVE GP-P
5. 148-4644 DRIVE GP-S
6. 148-4679 DRIVE GP-S
7. 227-6166 FASTENER G
8. 267-6880 FASTENER G

FILTER GP

9. 158-8987 FILTER & V
0. INFORMATION

EXCAVATOR 320D FM EXCAVATOR BZF
320D Forest Machines BZF00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4939 320D FM BZF (2006)

HYDRAULIC SYSTEM

CYLINDER GP

349-4134 CYLINDER & SEAL GP-BUCKET

242-6744 CYLINDER & SEAL GP-STICK

341-2807 CYLINDER & SEAL GP-STICK

349-4130 CYLINDER & SEAL GP-STICK

263-2914 CYLINDER GP-CAB TILT

380-8801 GUARD GP-CYLINDER

#SEBP49390460

341-2807: CYLINDER & SEAL GP-STICK

CYLINDER & SEAL GP-STICK

341-2807 CYLINDER & SEAL GP-STICK
S/N BZF1-UP; EAX1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE
FIELD REPLACEMENT FOR @@@@@349-4130@@@@@

i04420609 SEBP4939

3412807 CYLINDER & SEAL GP-STICK Parts scheme

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	352-1098	[1]	CYLINDER AS-STICK
1A.	357-5711	[2]	BUSHING
2.	352-1104	[1]	ROD AS
2A.	240-2914	[1]	BUSHING
3.	188-4181	[1]	HEAD
4.	095-1721 J	[1]	SEAL-O-RING
5.	4I-3627 J	[1]	RING-BACKUP
6.	096-5625	[1]	BUSHING
7.	094-1931	[1]	RING-RETAINING
8.	350-0955 J	[1]	SEAL-BUFFER
9.	350-0960 J	[1]	SEAL-U-CUP
10.	121-1372 J	[1]	RING-BACKUP
11.	456-0195 J	[1]	SEAL-LIP TYPE
12.	214-4501 J	[1]	RING-SEAL
13.	378-1556	[1]	STOP
14.	247-8873	[1]	PISTON
15.	096-1571 J	[2]	RING
16.	247-8874 J	[2]	RING
17.	096-1570 J	[1]	SEAL AS
18.	4I-3631 J	[2]	RING-BACKUP
19.	4B-9880	[1]	BALL
20.	096-6210 M	[1]	SETSCREW-SOCKET (M14X2X14-MM)
21.	085-8605	[1]	RING-RETAINING
22.	194-8359 J	[1]	RING-SEAL
23.	085-8604	[2]	RING-RETAINING
24.	121-1549	[1]	STOP
25.	4I-3628 M	[12]	BOLT-SOCKET HEAD (M18X2.5X80-MM)
26.	166-1494	[4]	SEAL-LIP TYPE
27.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)

			AVAILABLE REPAIR KIT(S):
	456-0204 J	[1]	KIT-SEAL (STICK CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP49390461

349-4130: CYLINDER & SEAL GP-STICK

CYLINDER & SEAL GP-STICK

349-4130 CYLINDER & SEAL GP-STICK
S/N BZF1-UP; EAX1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE
PART OF 349-4129 CYLINDER & LINES GP-STICK
FIELD REPLACEMENT ORDER @@@@@341-2807@@@@@
AN ATTACHMENT

i04296122 SEBP4939

3494130 CYLINDER & SEAL GP-STICK Parts scheme

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-6904 J	[1]	SEAL-LIP TYPE
2.	121-1372 J	[1]	RING-BACKUP
3.	350-0960 J	[1]	SEAL-U-CUP
4.	350-0955 J	[1]	SEAL-BUFFER
5.	096-5625	[1]	BUSHING
6.	094-1931	[1]	RING-RETAINING
7.	188-4181	[1]	HEAD
8.	4I-3628 M	[12]	BOLT-SOCKET HEAD (M18X2.5X80-MM)
9.	095-1721 J	[1]	SEAL-O-RING
10.	4I-3627 J	[1]	RING-BACKUP
11.	247-8876	[1]	CYLINDER AS
11A.	241-7381	[1]	BUSHING
12.	247-8877	[1]	ROD AS
12A.	241-7381	[1]	BUSHING
13.	4I-8869	[1]	STOP
14.	214-4501 J	[1]	RING-SEAL
15.	4I-3631 J	[2]	RING-BACKUP
16.	096-1570 J	[1]	SEAL AS
17.	247-8874 J	[2]	RING
18.	096-1571 J	[2]	RING
19.	247-8873	[1]	PISTON
20.	096-6210 M	[1]	SETSCREW-SOCKET (M14X2X14-MM)
21.	4B-9880	[1]	BALL
22.	085-8605	[1]	RING-RETAINING
23.	194-8359 J	[1]	RING-SEAL
24.	121-1549	[1]	STOP
25.	085-8604	[2]	RING-RETAINING
26.	166-1494	[4]	SEAL-LIP TYPE
27.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)

			AVAILABLE REPAIR KIT(S):
	350-0971 J	[1]	KIT-SEAL (STICK CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP49390462

263-2914: CYLINDER GP-CAB TILT

CYLINDER GP-CAB TILT

263-2914 CYLINDER GP-CAB TILT
S/N BZF1-UP; EAX1-UP
127-MM (5-IN) BORE X 876.3-MM (34.5-IN) STROKE
PART OF 279-2779 CONTROL GP-CAB TILT

i02551221 SEBP4939

2632914 CYLINDER GP-CAB TILT Parts scheme

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	123-4396	[1]	ROD AS
2.	123-4397	[1]	CYLINDER AS
3.	113-0625	[1]	PISTON
4.	113-0626	[1]	HEAD
5.	108-6054	[1]	LOCKNUT
6.	113-0628	[1]	SETSCREW
7.	108-3344	[2]	PLUG
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	9S-4191	[1]	PLUG (9/16-18-THD)
8.	105-8117	[2]	VALVE GP-COUNTERBALANCE (CAB TILT CYLINDER)
9.	113-0631	[1]	CLEVIS
10.	231-3538 J	[1]	SEAL-WIPER
11.	167-2200 J	[1]	SEAL AS
12.	8T-4958 J	[1]	RING-WEAR
13.	5F-3144 J	[1]	SEAL-O-RING
14.	2K-4096 J	[1]	RING-BACKUP
15.	5J-5020	[1]	SEAL AS
16.	167-2307 J	[1]	SEAL-U-CUP
17.	4J-4630 J	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	241-7578 J	[1]	KIT-SEAL (CAB TILT CYLINDER)
	114-3616	[2]	KIT-SEAL (COUNTERBALANCE VALVE)
			(EACH INCLUDES O-RING SEALS & BACKUP RINGS)
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP49390463

191-5537: DRIVE GP-AUXILIARY PUMP

DRIVE GP-AUXILIARY PUMP

191-5537 DRIVE GP-AUXILIARY PUMP
S/N BZF1-UP; EAX1-UP
PART OF 290-1912 DRIVE GP-PUMP
AN ATTACHMENT

i01458566 SEBP4939

1915537 DRIVE GP-AUXILIARY PUMP Parts scheme

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	101-7402 M	[8]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
2.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
3.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
4.	191-5601	[2]	BEARING
5.	096-0121	[1]	SEAL-O-RING
6.	191-5541	[1]	COVER
7.	8T-5049	[1]	SEAL-O-RING
8.	177-2585	[1]	COVER
9.	173-3436	[1]	COVER
10.	095-1680	[1]	SEAL-O-RING
11.	9S-4191	[1]	PLUG (9/16-18-THD)
12.	3J-1907	[1]	SEAL-O-RING
13.	099-2096	[2]	BALL BEARING
14.	173-3406	[1]	SHAFT
15.	191-5540	[1]	GEAR (39-TEETH)
16.	191-5539	[1]	SHAFT
17.	129-7857	[1]	GASKET
18.	094-1875	[2]	DOWEL
	M		METRIC PART

#SEBP49390464

290-1912: DRIVE GP-PUMP

DRIVE GP-PUMP

290-1912 DRIVE GP-PUMP
S/N BZF1-UP; EAX1-UP
AN ATTACHMENT

i02668503 SEBP4939

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
191-5537 Y	[1]	DRIVE GP-AUXILIARY PUMP
298-2995 Y	[1]	SHEET AS-SOUND SUPPRESSION
Y		SEPARATE ILLUSTRATION

#SEBP49390465

148-4644: DRIVE GP-SWING

DRIVE GP-SWING

148-4644 DRIVE GP-SWING -WITHOUT MOTOR
S/N BZF1-UP; EAX1-UP
PART OF 148-4679 DRIVE GP-SWING

i01255064 SEBP4939

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
2.	094-1509	[3]	SHAFT-PLANETARY
3.	148-4733	[3]	GEAR-PLANETARY (26-TEETH)
4.	114-1581	[1]	SPACER (57.5X74X6-MM THK)
5.	148-4732	[1]	GEAR-SUN (20-TEETH)
6.	093-1729	[2]	RING-RETAINING
7.	148-4632	[1]	GEAR-SUN (23-TEETH)
8.	191-2578	[1]	CARRIER-PLANETARY
9.	7Y-1434	[1]	SPACER (40X69.5X6-MM THK)
10.	148-4637	[1]	CARRIER-PLANETARY
11.	148-4640	[1]	RING-RETAINING
12.	148-4643	[1]	BEARING
13.	095-1022	[1]	BEARING-ROLLER
14.	148-4642	[1]	SEAL-O-RING
15.	227-6228	[1]	CAGE
16.	453-3447 M	[6]	BOLT (M12X1.75X40-MM)
17.	451-2182	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	199-4561	[2]	SEAL-LIP TYPE
19.	148-4636	[1]	SHAFT-PINION
20.	148-4638	[1]	HOUSING
21.	3K-0360	[1]	SEAL-O-RING
22.	6V-7238	[1]	VALVE-SHUTOFF (SWING DRIVE)
23.	148-4634	[3]	SHAFT-PLANETARY
24.	095-0891	[3]	PIN-SPRING
25.	148-4635	[1]	GEAR-RING (73-TEETH)
26.	148-4633	[3]	GEAR-PLANETARY (25-TEETH)
27.	7Y-0252	[6]	BEARING AS-ROLLER
28.	094-0611	[6]	WASHER (47.3X76X1-MM THK)
29.	095-0886	[3]	PIN-SPRING
30.	094-1516	[3]	BEARING-ROLLER
31.	171-9383	[1]	SPACER

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP49390466

148-4679: DRIVE GP-SWING

DRIVE GP-SWING

148-4679 DRIVE GP-SWING -WITH MOTOR
S/N BZF1-UP; EAX1-UP
PART OF 267-6872, 267-6881 POWER TRAIN AR

i02448946 SEBP4939

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-4644 Y	[1]	DRIVE GP-SWING (WITHOUT MOTOR)
2.	114-1398	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
3.	114-1399	[1]	PIPE-GAUGE
4.	158-8985 Y	[1]	MOTOR & MTG GP-SWING
5.	227-6221	[1]	BREATHER AS (SWING DRIVE)
5A.	4H-6112	[1]	BREATHER (SWING DRIVE)
5B.	227-6215	[1]	BOSS (1/4-18-THD)
5C.	267-6785	[1]	PIPE

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	Y		SEPARATE ILLUSTRATION

#SEBP49390467

227-6166: FASTENER GP-SWING & FINAL DR

FASTENER GP-SWING & FINAL DR

227-6166 FASTENER GP-SWING & FINAL DR
S/N BZF1-UP
PART OF 267-6881 POWER TRAIN AR

i02418218 SEBP4939

2276166 FASTENER GP-SWING & FINAL DR Parts scheme

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2Y-5503	[2]	CORK
2.	5D-1026	[1]	CLAMP-BAND
3.	096-4755	[1]	PIN
4.	461-3878 M	[32]	BOLT (M20X2.5X160-MM)
5.	461-3882 M	[12]	BOLT (M24X3X70-MM)
6.	8T-3282	[32]	WASHER-HARD (22X35X3.5-MM THK)
7.	6V-8237	[12]	WASHER (26X44X4-MM THK)
8.	5P-0767 E		HOSE (90-CM)

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART

#SEBP49390468

267-6880: FASTENER GP-SWING DRIVE & MTR

FASTENER GP-SWING DRIVE & MTR

267-6880 FASTENER GP-SWING DRIVE & MTR
S/N EAX1-UP
PART OF 267-6872 POWER TRAIN AR

i02604655 SEBP4939

2676880 FASTENER GP-SWING DRIVE & MTR Parts scheme

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2Y-5503	[2]	CORK
2.	5D-1026	[1]	CLAMP-BAND
3.	096-4755	[1]	PIN
4.	106-4175 M	[40]	BOLT (M20X2.5X60-MM)
5.	201-7949 M	[12]	BOLT (M24X3X70-MM)
6.	8T-3282	[40]	WASHER-HARD (22X35X3.5-MM THK)
7.	6V-8237	[12]	WASHER (26X44X4-MM THK)
8.	5P-0767 E		HOSE (90-CM)

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART

#SEBP49390469

158-8987: FILTER & VALVE GP-PILOT

FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N BZF1-UP; EAX1-UP
PART OF 239-1711, 456-2227 TANK & FILTER GP-HYDRAULIC

i01256862 SEBP4939

1588987 FILTER & VALVE GP-PILOT Parts scheme

For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-8670	[1]	FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)
2.	215-4909	[1]	VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)
2A.	095-1584	[1]	SEAL-O-RING
2B.	095-1590	[1]	SEAL-O-RING
2C.	095-1596	[1]	SEAL-O-RING

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}

Technical Information Bulletin

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Lines - Harvester
320D Forest Machine Machine System Specifications

Bucket Cylinder
320D Forest Machine Machine System Specifications

Boom Cylinder
320D Forest Machine Machine System Specifications

Boom Cylinder Lines
320D Forest Machine Machine System Specifications

Boom Lines
320D Forest Machine Machine System Specifications

Stick Cylinder
320D Forest Machine Machine System Specifications

Boom Cylinder Lines - Left Hand
320D Forest Machine Machine System Specifications

Boom Cylinder Lines - Right Hand
320D Forest Machine Machine System Specifications

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Systems Operation

Cylinders (Boom, Stick and Bucket)
320D Forest Machine Hydraulic System

Cylinder (Boom, Stick and Heel)
320D Forest Machine Hydraulic System

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Testing and Adjusting

Cylinder Speed - Check
320D Forest Machine Hydraulic System

Cylinder Drift - Check - Empty Bucket
320D Forest Machine Hydraulic System

Cylinder Drift - Check - Loaded Bucket
320D Forest Machine Hydraulic System

Bench Test Procedures

Disassembly and Assembly

Cab Tilt Cylinder - Remove and Install
320D FM Excavator Machine Systems

Boom Cylinder - Remove and Install
320D FM Excavator Machine Systems

Service Magazine

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2012/05/18

New Implement Cylinder Rod Seals are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458}
2015/06/19

Caterpillar Parts SIS Catalog 320D FM :

242-6744 CYLINDER & SEAL GP-STICK

349-4134 CYLINDER & SEAL GP-BUCKET

341-2814 CYLINDER & SEAL GP-BUCKET

242-6756 CYLINDER & SEAL GP-BUCKET

383-1506 CYLINDER & SEAL GP-BOOM

349-4126 CYLINDER & SEAL GP-BOOM

341-2790 CYLINDER & SEAL GP-BOOM

242-6731 CYLINDER & SEAL GP-BOOM

349-4130 CYLINDER & SEAL GP-STICK

263-2914 CYLINDER GP-CAB TILT

191-5537 DRIVE GP-AUXILIARY PUMP

290-1912 DRIVE GP-PUMP

148-4644 DRIVE GP-SWING

148-4679 DRIVE GP-SWING

227-6166 FASTENER GP-SWING & FINAL DR

267-6880 FASTENER GP-SWING DRIVE & MTR

Truck sale:

Caterpillar 320D FM
- Knuckleboom loaders
WESTERN STATES EQUIPMENT

105,018

Caterpillar 320D FM, Forestry Excavators, Forestry equipment
- Forestry Excavators
FINNING CANADA

55,000

Caterpillar 320DFMST, Crawler Excavators, Construction
- Crawler Excavators
FINNING CHILE S.A.

47,999

Caterpillar 320DFMLL, Feller Bunchers, Forestry equipment
- Feller Bunchers
TERRA CAT

103,228

Caterpillar 320D FM, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA