AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

319-1371 WIRING GP-HEATER S/N GKS1-UP FIELD INSTALLATION 320D EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 320D EXCAVATOR GKS
 320D Log Loader GKS00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4940 320D GKS   (2006)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-GRAPPLE CONTROL
283-2789 WIRING GP-GRAPPLE CONTROL
WIRING GP-HEATER
306-8690 WIRING GP-HEATER
WIRING GP-HEATER
319-1371 WIRING GP-HEATER
WIRING GP-PLATFORM
272-3099 WIRING GP-PLATFORM
WIRING GP-PUMP
291-7819 WIRING GP-PUMP
WIRING GP-WORK TOOL
283-2801 WIRING GP-WORK TOOL
 

#SEBP49400250
 

319-1371: WIRING GP-HEATER

319-1371 WIRING GP-HEATER
S/N GKS1-UP
FIELD INSTALLATION
i02980131 SEBP4940
3191371 WIRING GP-HEATER Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [6] STRAP-CABLE  
2. 116-0114 [1] SWITCH AS-MAGNETIC (24-VOLT)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 197-4330 [1] CONTROLLER-AIR (HEATER)  
4. 319-1359 [1] HARNESS AS-PANEL  
5. 319-1360 [1] CABLE AS  
  6V-2369 D CABLE (4-GA, BLACK)(0.5-M)  
  9G-4343 [2] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
6. 319-1361 [1] CABLE AS  
  6V-2369 D CABLE (4-GA, BLACK)(0.6-M)  
  9G-4343 [2] TERMINAL-RING (4-GA, 1/4-IN SCREW)  
7. 319-1363 [1] PLATE AS  
8. 5C-2890 M [2] NUT (M6X1-THD)  
9. 7X-2619 M [4] BOLT (M6X1X10-MM)  
10. 8T-4171 M [2] BOLT (M6X1X12-MM)  
11. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP49400251
 

272-3099: WIRING GP-PLATFORM

272-3099 WIRING GP-PLATFORM
S/N GKS1-UP
PART OF 291-6238, 291-6239 OPERATOR AR
AN ATTACHMENT
i02605412 SEBP4940
2723099 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [4] STRAP-CABLE  
4. 111-4838 [1] CLIP  
5. 111-4839 [1] STRAP  
6. 116-0118 [11] CLIP  
7. 209-0381 [2] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
8. 256-5046 [1] BRACKET  
9. 262-8555 Y [1] HARNESS AS-PLATFORM (OPERATOR STATION, FRONT)  
10. 272-3100 Y [1] HARNESS AS-PLATFORM (OPERATOR STATION, REAR)  
11. 278-9575 [1] COVER  
12. 095-0728 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
13. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
14. 111-4836 [2] CLIP  
15. 4P-8134 [3] CLIP (LADDER)(LADDER)  
16. 7X-2621 M [6] BOLT (M10X1.5X12-MM)  
17. 7Y-3173 M [12] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
18. 8T-0328 [12] WASHER-HARD (5.5X10X1-MM THK)  
19. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
21. 8T-4138 M [4] BOLT (M6X1X20-MM)  
22. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
23. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49400252
 

291-7819: WIRING GP-PUMP

291-7819 WIRING GP-PUMP -VACCUM PUMP
S/N GKS1-UP
PART OF 279-2816, 415-1539 PUMP AR-VACUUM
AN ATTACHMENT
i02895096 SEBP4940
2917819 WIRING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [12] STRAP-CABLE  
2. 7I-2673 [5] STRAP-CABLE  
3. 7K-1181 [15] STRAP-CABLE  
4. 116-0118 [1] CLIP  
5. 306-8702 [1] HARNESS AS-PUMP  
6. 306-8703 [1] SWITCH AS-ROCKER (VACUUM PUMP)(VACUUM PUMP)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [4] TERMINAL (MALE)  
 

#SEBP49400253
 

283-2801: WIRING GP-WORK TOOL

283-2801 WIRING GP-WORK TOOL -SLASHER
S/N GKS1-UP
PART OF 279-2708, 432-6541 CONTROL AR-WORK TOOL
AN ATTACHMENT
i02630843 SEBP4940
2832801 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [3] STRAP-CABLE  
2. 7K-1181 [7] STRAP-CABLE  
3. 306-8381 [1] HARNESS AS-VALVE  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
4. 132-5789 [2] CLIP (LADDER)  
5. 7X-2538 M [1] BOLT (M8X1.25X100-MM)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
  M   METRIC PART
 

#SEBP49400254
 

227-6116: DRIVE GP-FINAL

227-6116 DRIVE GP-FINAL -WITHOUT MOTOR
S/N GKS1-189
PART OF 267-6873 DRIVE GP-FINAL
i02117236 SEBP4940
2276116 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 094-0578 B [1] PLATE (8-MM THK)  
3. 094-0579 B [1] PLATE (9-MM THK)  
4. 094-0580 B [1] PLATE (10-MM THK)  
5. 094-1528 [12] WASHER (53X84X1-MM THK)  
6. 168-8452 J [2] BALL BEARING  
7. 169-5585 J [1] HOUSING  
8. 169-5589 [1] GEAR-SUN (24-TEETH)  
9. 169-5590 [1] GEAR-SUN (24-TEETH)  
10. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
11. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
12. 169-5601 [3] SHAFT-PLANETARY  
13. 169-5602 [3] SHAFT-PLANETARY  
14. 171-9387 [1] GEAR-RING (64-TEETH)  
15. 191-2569 [3] BEARING AS (CAGED ROLLER)  
16. 191-2570 [6] BEARING AS (CAGED ROLLER)  
17. 191-2571 [1] CARRIER-PLANETARY  
18. 191-2676 [1] GEAR-RING (72-TEETH)  
19. 191-2683 [1] GEAR-SUN (20-TEETH)  
20. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
21. 191-2685 [3] BEARING AS  
22. 191-2686 [1] CARRIER AS  
  [3] SHAFT-PLANETARY  
  191-2687 [3] RACE-BEARING  
23. 191-2689 [3] WASHER (34X70X1-MM THK)  
24. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
25. 199-4503 [1] COVER  
26. 207-1571 J [1] SEAL GP-DUO-CONE  
26A. 214-3570 [2] RING-TORIC  
26B. Z [2] SEAL-RING  
27. 227-6117 J [1] HOUSING-MOTOR  
28. 227-6118 J [1] RETAINER  
29. 227-6119 [1] CARRIER-PLANETARY  
30. 227-6123 J [2] DOWEL  
31. 227-6124 J [2] PLATE-WASHER  
32. 093-1731 [2] RING-RETAINING  
33. 095-0891 [6] PIN-SPRING  
34. 096-0433 [3] RING-RETAINING  
35. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
36. 171-9298 [1] SEAL-O-RING  
37. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
38. 7M-8485 [2] SEAL-O-RING  
39. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
40. 8T-0293 JM [4] BOLT (M12X1.75X20-MM)  
41. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
42. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
43. 1U-8846 B SEALANT-GASKET  
   
    AVAILABLE REPAIR KIT(S):
  227-6125 J [1] KIT-HOUSING (FINAL DRIVE)  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP49400255
 

267-6796: DRIVE GP-FINAL

267-6796 DRIVE GP-FINAL -WITHOUT MOTOR
S/N GKS190-265
PART OF 296-6242 DRIVE GP-FINAL
i02895171 SEBP4940
2676796 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 267-6863 BJ [1] SHIM (0.75-MM THK)  
  7Y-0752 BJ [1] SHIM (0.8-MM THK)  
  267-6864 BJ [1] SHIM (0.85-MM THK)  
  267-6865 BJ [1] SHIM (0.9-MM THK)  
  267-6866 BJ [1] SHIM (0.95-MM THK)  
  7Y-0753 BJ [1] SHIM (1-MM THK)  
  267-6867 BJ [1] SHIM (1.2-MM THK)  
  267-6868 BJ [1] SHIM (1.4-MM THK)  
  7Y-0754 BJ [1] SHIM (1.6-MM THK)  
  267-6869 BJ [1] SHIM (1.8-MM THK)  
  267-6870 BJ [1] SHIM (2-MM THK)  
  267-6871 BJ [1] SHIM (2.3-MM THK)  
5. 094-0578 B [1] PLATE (8-MM THK)  
  094-0579 B [1] PLATE (9-MM THK)  
  094-0580 B [1] PLATE (10-MM THK)  
8. 094-1528 [12] WASHER (53X84X1-MM THK)  
9. 114-1540 J [4] PIN-DOWEL  
10. 168-8452 J [2] BALL BEARING  
11. 169-5589 [1] GEAR-SUN (24-TEETH)  
12. 169-5590 [1] GEAR-SUN (24-TEETH)  
13. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
14. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
15. 169-5601 [3] SHAFT-PLANETARY  
16. 169-5602 [3] SHAFT-PLANETARY  
17. 171-9387 [1] GEAR-RING (64-TEETH)  
18. 191-2569 [3] BEARING AS (CAGED ROLLER)  
19. 191-2570 [6] BEARING AS (CAGED ROLLER)  
20. 191-2571 [1] CARRIER-PLANETARY  
21. 191-2676 [1] GEAR-RING (72-TEETH)  
22. 191-2683 [1] GEAR-SUN (20-TEETH)  
23. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
24. 191-2685 [3] BEARING AS  
25. 191-2686 [1] CARRIER AS  
  191-2687 [3] RACE-BEARING  
26. 191-2689 [3] WASHER (34X70X1-MM THK)  
27. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
28. 199-4503 [1] COVER  
29. 207-1571 J [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
30. 267-6797 J [1] HOUSING-MOTOR  
31. 267-6798 J [1] HOUSING  
32. 267-6799 [1] CARRIER-PLANETARY  
33. 267-6800 J [1] GEAR-COUPLING  
43. 093-1731 [2] RING-RETAINING  
44. 095-0891 [6] PIN-SPRING  
45. 096-0433 [3] RING-RETAINING  
46. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
47. 171-9298 [1] SEAL-O-RING  
48. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
49. 7M-8485 [2] SEAL-O-RING  
50. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
51. 7Y-5217 JM [16] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
52. 8T-3282 J [16] WASHER-HARD (22X35X3.5-MM THK)  
53. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
54. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
55. 1U-8846 B SEALANT-GASKET  
   
    AVAILABLE REPAIR KIT(S):
  267-6818 J [1] KIT-FINAL DRIVE BEARING  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP49400256
 

267-6873: DRIVE GP-FINAL

267-6873 DRIVE GP-FINAL -WITH MOTOR
S/N GKS1-189
PART OF 267-6872 POWER TRAIN AR
i02604590 SEBP4940
2676873 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-6116 Y [1] DRIVE GP-FINAL  
2. 289-7747 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49400257
 

296-6242: DRIVE GP-FINAL

296-6242 DRIVE GP-FINAL -WITH MOTOR
S/N GKS190-265
PART OF 267-6872 POWER TRAIN AR
i02922572 SEBP4940
2966242 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 267-6796 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
2. 289-7747 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49400258
 

367-8292: DRIVE GP-FINAL

367-8292 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N GKS266-UP
PART OF 267-6872 POWER TRAIN AR
i04703589 SEBP4940
3678292 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 194-1197 Y [1] SPROCKET GP  
2. 378-9572 Y [1] DRIVE GP-FINAL (WITH MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49400259
 

378-9567: DRIVE GP-FINAL

378-9567 DRIVE GP-FINAL -WITHOUT MOTOR
S/N GKS266-UP
PART OF 378-9572 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@515-0070@@@@@, @@@@@515-0073@@@@@
i04703631 SEBP4940
3789567 DRIVE GP-FINAL Parts scheme 3789567 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-0752 B [1] SHIM (0.8-MM THK)  
  7Y-0753 B [1] SHIM (1-MM THK)  
  7Y-0754 B [1] SHIM (1.6-MM THK)  
4. 094-0578 [1] PLATE (8-MM THK)  
5. 094-0579 [1] PLATE (9-MM THK)  
6. 094-0580 [1] PLATE (10-MM THK)  
7. 094-1528 [12] WASHER (53X84X1-MM THK)  
8. 114-1540 [4] PIN-DOWEL  
9. 169-5589 [1] GEAR-SUN (24-TEETH)  
10. 169-5590 [1] GEAR-SUN (24-TEETH)  
11. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
12. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
13. 169-5601 [3] SHAFT-PLANETARY  
14. 169-5602 [3] SHAFT-PLANETARY  
15. 171-9387 [1] GEAR-RING (64-TEETH)  
16. 191-2571 [1] CARRIER-PLANETARY  
17. 191-2676 [1] GEAR-RING (72-TEETH)  
18. 191-2683 [1] GEAR-SUN (20-TEETH)  
19. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
20. 191-2686 [1] CARRIER AS  
  191-2687 [3] RACE-BEARING  
21. 191-2689 [3] WASHER (34X70X1-MM THK)  
22. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
23. 199-4503 [1] COVER  
24. 207-1571 [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
25. 267-6798 [1] HOUSING  
26. 267-6799 [1] CARRIER-PLANETARY  
27. 267-6800 [1] GEAR-COUPLING  
28. 267-6863 B [1] SHIM (0.75-MM THK)  
  267-6864 B [1] SHIM (0.85-MM THK)  
  267-6865 B [1] SHIM (0.9-MM THK)  
  267-6866 B [1] SHIM (0.95-MM THK)  
  267-6867 B [1] SHIM (1.2-MM THK)  
  267-6868 B [1] SHIM (1.4-MM THK)  
  267-6869 B [1] SHIM (1.8-MM THK)  
  267-6870 B [1] SHIM (2-MM THK)  
  267-6871 B [1] SHIM (2.3-MM THK)  
37. 296-6248 [3] BEARING AS-ROLLER  
38. 333-2914 [2] BALL BEARING  
39. 333-2916 [3] BEARING AS  
40. 333-2917 [6] BEARING AS  
41. 367-8276 [1] HOUSING-MOTOR  
42. 093-1731 [2] RING-RETAINING  
43. 095-0891 [6] PIN-SPRING  
44. 096-0433 [3] RING-RETAINING  
45. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
46. 171-9298 [1] SEAL-O-RING  
47. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
48. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
49. 7M-8485 [2] SEAL-O-RING  
50. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
51. 7Y-5217 M [16] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
52. 8T-3282 [16] WASHER-HARD (22X35X3.5-MM THK)  
53. 451-2176 [16] WASHER-HARD (22X35X3.5-MM THK)  
54. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Systems Operation
Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines
Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Troubleshooting
MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Caterpillar Parts SIS Catalog 320D :

WIRING GP-HEATER
306-8690 WIRING GP-HEATER
WIRING GP-GRAPPLE CONTROL
283-2789 WIRING GP-GRAPPLE CONTROL
WIRING GP-FUEL SYSTEM
283-2790 WIRING GP-FUEL SYSTEM
WIRING GP-FUEL SYSTEM
283-2790 WIRING GP-FUEL SYSTEM
WIRING GP-FINE SWING
259-5052 WIRING GP-FINE SWING
WIRING GP-FAN
342-3006 WIRING GP-FAN
342-3005 WIRING GP-FAN
306-8501 WIRING GP-FAN
WIRING GP-PLATFORM
272-3099 WIRING GP-PLATFORM
WIRING GP-PUMP
291-7819 WIRING GP-PUMP
WIRING GP-WORK TOOL
283-2801 WIRING GP-WORK TOOL
DRIVE GP-FINAL
227-6116 DRIVE GP-FINAL
DRIVE GP-FINAL
267-6796 DRIVE GP-FINAL
DRIVE GP-FINAL
267-6873 DRIVE GP-FINAL
DRIVE GP-FINAL
296-6242 DRIVE GP-FINAL
DRIVE GP-FINAL
367-8292 DRIVE GP-FINAL

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.