OPERATOR STATION
CONSOLE GPELECTRICAL AND STARTING SYSTEM
RADIO GPSENSOR GP
STARTING MOTOR GP
SWITCH GP
OPERATOR STATION
CONSOLE GP
#SEBP49430140
251-0542: PANEL GP-SWITCH
251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N BYM1-UP
PART OF 275-9731 CAB AR
AN ATTACHMENT
S/N BYM1-UP
PART OF 275-9731 CAB AR
AN ATTACHMENT
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 106-0107 Y | [1] | SWITCH GP-ROTARY (ENGINE SPEED) | |
| 4. | 170-9324 | [1] | LAMP AS-INDICATOR (24-VOLT, 3-WATT) | |
| 5. | 185-9208 | [1] | KNOB AS (THROTTLE POSITION) | |
| 6. | 234-1156 | [1] | COVER | |
| 7. | 234-1158 | [1] | COVER | |
| 8. | 267-7976 | [1] | PANEL | |
| 9. | 251-0543 | [1] | HARNESS AS-CONSOLE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 6V-9491 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49430141
251-0542: PANEL GP-SWITCH
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 319-4420 CY | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 4. | 170-9324 | [1] | LAMP AS-INDICATOR (24-VOLT, 3-WATT) | |
| 5. | 185-9208 | [1] | KNOB AS (THROTTLE POSITION) | |
| 6. | 234-1156 | [1] | COVER | |
| 7. | 234-1158 | [1] | COVER | |
| 8. | 267-7976 | [1] | PANEL | |
| 9. | 328-0021 C | [1] | HARNESS AS-CONSOLE (RH) | |
| 3S-2093 | [3] | STRAP-CABLE | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [14] | TERMINAL (MALE) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 153-2540 | [10] | TERMINAL (FEMALE) | ||
| 153-2541 | [1] | PLUG-CONNECTOR (10-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 6V-9491 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49430142
251-0544: PANEL GP-SWITCH
251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N BYM1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
AN ATTACHMENT
S/N BYM1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
AN ATTACHMENT
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 106-0107 Y | [1] | SWITCH GP-ROTARY (ENGINE SPEED) | |
| 4. | 185-9208 | [1] | KNOB AS | |
| 5. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 6. | 205-8257 | [1] | COIL AS (EXCITER) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 207-5271 | [1] | WASHER (27X60.5X0.36-MM THK) | ||
| 7. | 234-1156 | [1] | COVER | |
| 8. | 267-7977 | [1] | PANEL | |
| 9. | 251-0543 | [1] | HARNESS AS-CONSOLE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 6V-9491 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49430143
263-9088: RADIO GP-COMMUNICATION
263-9088 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N BYM456-UP
PART OF 309-5881 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT
S/N BYM456-UP
PART OF 309-5881 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 336-3566 | [1] | SOFTWARE GP-COMMUNICATION (PRODUCT LINK 121SR) |
#SEBP49430144
296-4666: SENSOR GP-ENGINE
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (ENGINE COOLANT) | |
| 1A. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (AIR INLET MANIFOLD) | |
| 1B. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
| 2. | 238-0118 | [1] | SENSOR GP-PRESSURE (FUEL MANIFOLD) | |
| 3. | 296-4631 | [1] | WASHER (6.06X9.5X1-MM THK) | |
| 4. | 274-6720 | [1] | SENSOR GP-PRESSURE (AIR INLET MANIFOLD) | |
| 5. | 274-6721 | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 6. | 238-0120 | [1] | SENSOR GP-SPEED (ENGINE) | |
| 7. | 294-1804 | [4] | SEAL-O-RING | |
| 8. | 296-4633 | [1] | SEAL-O-RING | |
| 9. | 266-0136 | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 9X-1813 E | SLEEVE (8-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 237-0228 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 10. | 296-4621 | [2] | BOLT (M8X1.25-THD) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP49430145
178-2345: SENSOR GP-LIQUID LEVEL
178-2345 SENSOR GP-LIQUID LEVEL
S/N BYM1-UP
PART OF 272-4772 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT
S/N BYM1-UP
PART OF 272-4772 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-2334 | [1] | PROBE AS-LIQUID LEVEL (WATER SEPARATOR) | |
| 1A. | 3J-1907 | [1] | SEAL-O-RING | |
| 2. | 178-2335 | [1] | SENSOR AS-LIQUID LEVEL (WATER SEPARATOR) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
#SEBP49430146
272-4772: SENSOR GP-LIQUID LEVEL
272-4772 SENSOR GP-LIQUID LEVEL -WATER IN FUEL
S/N BYM1-UP
PART OF 279-5544 CONVERSION AR-MACHINE
AN ATTACHMENT
S/N BYM1-UP
PART OF 279-5544 CONVERSION AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 323D L EXCAVATOR:
#SEBP49430147
272-4774: STARTING MOTOR GP-ELECTRIC
272-4774 STARTING MOTOR GP-ELECTRIC
S/N GDC1-UP
24-VOLT
PART OF 287-0120 ENGINE AR, 296-4637 MOUNTING GP-STARTING MOTOR
S/N GDC1-UP
24-VOLT
PART OF 287-0120 ENGINE AR, 296-4637 MOUNTING GP-STARTING MOTOR
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-5947 | [1] | SETSCREW | |
| 2. | 294-1855 C | [1] | BRACKET AS | |
| 127-5937 | [1] | BEARING AS | ||
| 3. | 127-5944 | [1] | LEVER AS | |
| 4. | 294-1857 C | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT) | |
| 5. | 127-5948 | [1] | BALL | |
| 6. | 127-5949 | [1] | PACKING AS | |
| 7. | 127-5950 | [1] | ARMATURE AS | |
| 095-0410 | [1] | BEARING | ||
| 8. | 095-0085 | [1] | BOLT SET | |
| 9. | 279-7750 | [1] | PINION SET | |
| 094-9950 | [1] | STOP SET | ||
| 10. | 233-1279 | [1] | SHAFT GP-MOTOR | |
| 127-5939 | [1] | SHAFT AS-GEAR | ||
| 127-5940 | [1] | WASHER AS | ||
| 127-5941 | [1] | GEAR AS-INTERNAL | ||
| 127-5943 | [4] | GEAR AS (55/138-TEETH) | ||
| 233-1280 | [1] | CLUTCH | ||
| 11. | 094-9980 | [2] | GASKET | |
| 12. | 127-5952 | [1] | YOKE AS | |
| 127-5953 | [2] | BRUSH | ||
| 13. | 294-1858 C | [1] | HOLDER AS | |
| 14. | 135-2366 | [1] | BRACKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP49430148
547-7976: SWITCH & WIRE GP-FUEL LEVEL
547-7976 SWITCH & WIRE GP-FUEL LEVEL
S/N BYM1-UP
FUEL LEVEL SWITCH KIT
PART OF 5C-6108 SWITCH GP-REFUELING
AN ATTACHMENT
S/N BYM1-UP
FUEL LEVEL SWITCH KIT
PART OF 5C-6108 SWITCH GP-REFUELING
AN ATTACHMENT
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [18] | STRAP-CABLE | ||
| 418-6596 | [1] | SWITCH AS-LIQUID LEVEL | ||
| 3T-4696 | [1] | TERMINAL-RING (10-GA TO 12-GA, 7/16-IN SCREW) | ||
| 6A-3361 H | WIRE-ELECTRICAL (16-GA)(60-DM) | |||
| H | ORDER BY THE DECIMETER | |||
#SEBP49430149
7N-0719: SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N BYM1-UP
PART OF 259-5177, 319-1386 PANEL GP-CIRCUIT BREAKER
S/N BYM1-UP
PART OF 259-5177, 319-1386 PANEL GP-CIRCUIT BREAKER
For full view, you need register
Information:
OPERATOR STATION
CONSOLE GP
Operation and Maintenance Manual
Special Instruction
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into
Specifications
Disassembly and Assembly
Service Magazine
