357-9843 CYLINDER GP-BUCKET S/N CLA1-UP 88.9-MM (3.5-IN) BORE X 286-MM (11.3-IN) STROKE PART OF 352-2302 BUCKET GP-TILTABLE AN ATTACHMENT 311D LRR

HYDRAULIC SYSTEM

CYLINDER GP

0. 357-9843 CYLINDER G
1. 273-4147 CYLINDER G
2. 300-6024 CYLINDER G
3. 289-7726 CYLINDER G

DRIVE GP

4. 169-5549 DRIVE GP-S
5. 267-6841 DRIVE GP-S
6. 267-6841 DRIVE GP-S
7. 267-6842 DRIVE GP-S
8. 267-6846 DRIVE GP-S
9. 267-6847 DRIVE GP-S
0. INFORMATION

EXCAVATOR 311D LRR EXCAVATOR CLA
311D LRR Excavator CLA00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP4947 311D LRR CLA (2008)

HYDRAULIC SYSTEM

CYLINDER GP

289-8086 CYLINDER GP-BUCKET

295-2006 CYLINDER GP-BUCKET

357-9843 CYLINDER GP-BUCKET

273-4147 CYLINDER GP-COUPLER

300-6024 CYLINDER GP-COUPLER

289-7726 CYLINDER GP-STICK

#SEBP49470540

357-9843: CYLINDER GP-BUCKET

CYLINDER GP-BUCKET

357-9843 CYLINDER GP-BUCKET
S/N CLA1-UP
88.9-MM (3.5-IN) BORE X 286-MM (11.3-IN) STROKE
PART OF 352-2302 BUCKET GP-TILTABLE
AN ATTACHMENT

i06876347 SEBP4947

For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	357-9844	[1]	BRACKET-RETAINER
2.	3S-1349	[1]	WASHER-HARD (31X52.5X6-MM THK)
3.	1C-0569	[1]	BOLT (5/16-18X0.5-IN)
4.	3S-1356	[1]	NUT-FULL (1-1/8-12-THD)
5.	3B-4505	[1]	LOCKWASHER
6.	357-9845	[1]	ADAPTER
7.	357-9840	[1]	ADAPTER
8.	357-9847	[1]	BUSHING
9.	357-9848	[1]	PISTON
10.	357-9849	[1]	ADAPTER
11.	6F-6673	[1]	SEAL-O-RING
12.	4J-9224	[1]	RING-BACKUP
13.	7J-9885	[1]	RING-WEAR
14.	4T-8054	[1]	SEAL AS
15.	2H-3931	[2]	SEAL-O-RING
16.	289-2935	[1]	SEAL AS-BUFFER
17.	289-2946	[1]	SEAL-U-CUP
18.	7J-8277	[1]	SEAL-LIP TYPE
19.	027-1287	[1]	FITTING-GREASE
20.	357-9850	[1]	TUBE AS

#SEBP49470541

273-4147: CYLINDER GP-COUPLER

CYLINDER GP-COUPLER

273-4147 CYLINDER GP-COUPLER
S/N CLA1-UP
63-MM (2.5-IN) BORE X 105-MM (4.1-IN) STROKE
PART OF 236-4153 COUPLER GP-QUICK
AN ATTACHMENT

i02785035 SEBP4947

2734147 CYLINDER GP-COUPLER Parts scheme

For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	091-5928	[2]	FITTING-GREASE
2.	172-8406	[1]	VALVE GP-CHECK (HYD CYLINDER, QUICK COUPLER)
	2U-5338	[1]	SEAL-O-RING (15.6-MM ID)
	107-7640	[1]	SEAL-O-RING (12.1-MM ID)
	9W-3340	[1]	SEAL-O-RING (10.1-MM ID)

			AVAILABLE REPAIR KIT(S):
	326-5237	[1]	KIT-SEAL (COUPLER CYLINDER)
			(INCLUDES 3 O-RING SEALS, BACK-UP RING, WEAR RING, WIPER SEAL, GLAND SEAL & PISTON SEAL)

#SEBP49470542

300-6024: CYLINDER GP-COUPLER

CYLINDER GP-COUPLER

300-6024 CYLINDER GP-COUPLER
S/N CLA1-UP
63.5-MM (2.5-IN) BORE X 137-MM (5.39-IN) STROKE
PART OF 292-4159 COUPLER GP-QUICK
AN ATTACHMENT

i03823032 SEBP4947

3006024 CYLINDER GP-COUPLER Parts scheme

For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
2.	9F-2167	[1]	SCREW-PURGE (3/8-24X1.164-IN)
3.	346-5585	[1]	BEARING
4.	346-5586	[2]	BEARING (TRUNNION)
5.	346-5587	[1]	PISTON
6.	346-5588	[1]	HEAD
7.	346-5589	[1]	ROD AS
8.	346-5590	[1]	TUBE AS
9.	346-6711 J	[1]	VALVE AS-COUNTERBALANCE
10.	010-2570	[3]	SETSCREW (1/4-20X0.375-IN)
11.	2D-4534	[12]	BOLT-SOCKET HEAD (3/8-16X1-IN)
12.	9S-8002	[3]	PLUG (7/16-20-THD)
13.	9S-8004	[1]	PLUG (9/16-18-THD)

			AVAILABLE REPAIR KIT(S):
	346-5584	[1]	KIT-SEAL (COUPLER CYLINDER)
			(INCLUDES WIPER, DOUBLE LIP SEAL, WEAR RING, O-RING, BACK-UP RING, PISTON RING SET & PISTON RING)
	161-1980 J	[1]	KIT-SERVICE (COUNTERBALANCE VALVE)
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP49470543

289-7726: CYLINDER GP-STICK

CYLINDER GP-STICK

289-7726 CYLINDER GP-STICK
S/N CLA1-UP
110-MM (4.3-IN) BORE X 1194-MM (47-IN) STROKE
PART OF 289-7725 CYLINDER & SEAL GP-STICK
AN ATTACHMENT

i02795775 SEBP4947

For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-3030	[1]	STOP
2.	9X-7301	[1]	SEAL AS
3.	099-0661	[1]	RING-RETAINING
4.	099-0674	[1]	RING
5.	103-8441	[1]	RING-RETAINING
6.	103-8442	[1]	RING
7.	105-7398	[1]	STOP
8.	143-8031 J	[2]	RING
9.	143-8150 M	[1]	LOCKNUT-SPECIAL
10.	165-9284 J	[1]	SEAL-LIP TYPE
11.	170-9842 J	[1]	SEAL-BUFFER
12.	170-9858 J	[1]	SEAL-U-CUP
13.	173-3351	[1]	HEAD
14.	283-5926	[1]	PISTON
15.	283-5927 J	[2]	RING
16.	283-5971 J	[1]	RING-SEAL
17.	289-7727	[1]	CYLINDER AS
17A.	273-6811	[1]	BUSHING
18.	289-7729	[1]	ROD AS
18A.	273-6811	[1]	BUSHING
19.	095-1627 J	[2]	SEAL-O-RING
20.	095-1674 J	[1]	SEAL-O-RING
21.	096-3467 J	[1]	RING-BACKUP
22.	099-0660 J	[3]	RING-BACKUP
23.	114-0750	[1]	BUSHING
24.	8T-4241	[2]	RING-RETAINING

			AVAILABLE REPAIR KIT(S):
	289-7733 J	[1]	KIT-SEAL (STICK CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP49470544

169-5549: DRIVE GP-SWING

DRIVE GP-SWING

169-5549 DRIVE GP-SWING -WITHOUT MOTOR
S/N CLA1-265
PART OF 267-6842, 267-6847 DRIVE GP-SWING
FIELD REPLACEMENT ORDER @@@@@333-3073@@@@@
ALSO AN ATTACHMENT

i01462617 SEBP4947

For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	191-2600	[3]	GEAR-PLANETARY
2.	191-2599	[1]	CARRIER-PLANETARY
3.	191-2604	[3]	PIN-SPRING
4.	191-2603	[3]	SHAFT-PLANETARY
5.	191-2609	[3]	SHAFT-PLANETARY
6.	191-2605	[1]	WASHER (30X75X3-MM THK)
7.	191-2611	[1]	GEAR-SUN
8.	191-2612	[1]	GEAR-SUN
9.	114-8224 M	[1]	BOLT (M20X1.5-THD)
10.	191-2613	[1]	GEAR-RING
11.	093-6089	[2]	DOWEL
12.	095-0893	[1]	PIN-SPRING
13.	7I-7625	[1]	BEARING AS-ROLLER
14.	191-2615	[1]	HOUSING
15.	191-2614	[1]	SHAFT-PINION
16.	7I-7632 B	[1]	SPACER (69.5-MM THK)
	7I-7633 B	[1]	SPACER (69.8-MM THK)
	7I-7634 B	[1]	SPACER (70.1-MM THK)
	7I-7635 B	[1]	SPACER (70.4-MM THK)
	7I-7636 B	[1]	SPACER (70.7-MM THK)
21.	7I-7626	[1]	BEARING AS-ROLLER
22.	8T-4195 M	[8]	BOLT (M10X1.5X30-MM)
23.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
24.	099-0233	[1]	SEAL-LIP TYPE
25.	099-0235	[1]	CAGE
26.	7I-7638 B	[1]	SPACER (10-MM THK)
	7I-7639 B	[1]	SPACER (10.03-MM THK)
	7I-7640 B	[1]	SPACER (10.05-MM THK)
	7I-7641 B	[1]	SPACER (10.08-MM THK)
	7I-7642 B	[1]	SPACER (10.1-MM THK)
	7I-7643 B	[1]	SPACER (10.12-MM THK)
	7I-7644 B	[1]	SPACER (10.15-MM THK)
	7I-7645 B	[1]	SPACER (10.18-MM THK)
	7I-7646 B	[1]	SPACER (10.2-MM THK)
	7I-7647 B	[1]	SPACER (10.23-MM THK)
	7I-7648 B	[1]	SPACER (10.25-MM THK)
	7I-7649 B	[1]	SPACER (10.28-MM THK)
38.	191-2607	[1]	CARRIER-PLANETARY
39.	114-8223	[1]	RETAINER
40.	191-2610	[3]	PIN-SPRING
41.	191-2602	[12]	WASHER (32X56X1.2-MM THK)
42.	191-2601	[9]	BEARING
43.	191-2608	[3]	GEAR-PLANETARY
44.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP49470545

267-6841: DRIVE GP-SWING

DRIVE GP-SWING

267-6841 DRIVE GP-SWING -WITH MOTOR
S/N CLA1-UP
PART OF 283-8792 CONTROL AR-FINE SWING
Type 1
AN ATTACHMENT

i02795999 SEBP4947

For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	171-9420	[1]	FITTING-PIPE
2.	171-9423	[1]	PIPE AS
	3K-0360	[1]	SEAL-O-RING
3.	191-2661	[1]	TUBE
4.	191-2662	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
5.	203-2059	[1]	CONNECTOR AS
	6V-8397	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	8C-6869	[1]	CONNECTOR
	8C-6869	[1]	CONNECTOR
6.	266-7932 Y	[1]	VALVE GP-SOLENOID (FINE SWING)
7.	267-6842 Y	[1]	DRIVE GP-SWING
8.	267-6856	[1]	BREATHER AS (SWING DRIVE)
9.	095-1581	[1]	SEAL-O-RING
10.	095-1698	[2]	SEAL-O-RING
11.	1B-5174	[1]	PLUG-PIPE
12.	4B-5984	[2]	ELBOW
13.	6V-8213 M	[6]	BOLT-SOCKET HEAD (M8X1.25X70-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49470546

267-6841: DRIVE GP-SWING

DRIVE GP-SWING

267-6841 DRIVE GP-SWING -WITH MOTOR
S/N CLA1-UP
PART OF 283-8792 CONTROL AR-FINE SWING
Type 2
AN ATTACHMENT

i03153991 SEBP4947

For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	171-9420	[1]	FITTING-PIPE
2.	171-9423	[1]	PIPE AS
	3K-0360	[1]	SEAL-O-RING
3.	191-2661	[1]	TUBE
4.	191-2662	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
5.	203-2059	[1]	CONNECTOR AS
	6V-8397	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	8C-6869	[1]	CONNECTOR
	8C-6869	[1]	CONNECTOR
6.	322-8717 CY	[1]	VALVE GP-SOLENOID (FINE SWING)
7.	267-6842 Y	[1]	DRIVE GP-SWING
8.	267-6856	[1]	BREATHER AS (SWING DRIVE)
9.	095-1581	[1]	SEAL-O-RING
10.	095-1698	[2]	SEAL-O-RING
11.	1B-5174	[1]	PLUG-PIPE
12.	4B-5984	[2]	ELBOW
13.	6V-8213 M	[6]	BOLT-SOCKET HEAD (M8X1.25X70-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49470547

267-6842: DRIVE GP-SWING

DRIVE GP-SWING

267-6842 DRIVE GP-SWING -WITH MOTOR
S/N CLA1-UP
PART OF 267-6841 DRIVE GP-SWING
AN ATTACHMENT

i02796000 SEBP4947

For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	169-5549 Y	[1]	DRIVE GP-SWING (WITHOUT MOTOR)
2.	274-2637 Y	[1]	MOTOR GP-PISTON
3.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	8T-5041 M	[12]	BOLT (M12X1.75X120-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49470548

267-6846: DRIVE GP-SWING

DRIVE GP-SWING

267-6846 DRIVE GP-SWING -WITH MOTOR
S/N CLA1-265
PART OF 267-6849 POWER TRAIN AR

i02794298 SEBP4947

For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	171-9420	[1]	FITTING-PIPE
2.	171-9423	[1]	PIPE AS
	3K-0360	[1]	SEAL-O-RING
3.	191-2661	[1]	TUBE
4.	191-2662	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
5.	267-6744	[1]	BREATHER AS (SWING DRIVE)
	4H-6112	[1]	BREATHER (SWING DRIVE)
	267-6786	[1]	FITTING
6.	267-6847 Y	[1]	DRIVE GP-SWING
7.	1B-5174	[1]	PLUG-PIPE
8.	4B-5984	[2]	ELBOW
	Y		SEPARATE ILLUSTRATION

#SEBP49470549

267-6847: DRIVE GP-SWING

DRIVE GP-SWING

267-6847 DRIVE GP-SWING -WITH MOTOR
S/N CLA1-265
PART OF 267-6846 DRIVE GP-SWING

i02794296 SEBP4947

For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	169-5549 Y	[1]	DRIVE GP-SWING (WITHOUT MOTOR)
2.	274-2635 Y	[1]	MOTOR GP-SWING
3.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	8T-5041 M	[12]	BOLT (M12X1.75X120-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Retrofitting Boom Lowering Control Valve/Stick Lowering Control Valve on 311D Excavators {1408, 5057, 5059, 5456, 5458, 7405, 7557}
Retrofitting Boom Lowering Control Valve/Stick Lowering Control Valve on 311D Excavators {1408, 5057, 5059, 5456, 5458, 7405, 7557}

Technical Information Bulletin

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Boom Lines
311D Excavator Machine System Specifications

Stick Cylinder
311D Excavator Machine System Specifications

Boom Cylinder Lines
311D Excavator Machine System Specifications

Boom Cylinder
311D Excavator Machine System Specifications

Bucket Cylinder
311D Excavator Machine System Specifications

Blade Lift Cylinder
311D Excavator Machine System Specifications

Boom Cylinder Lines
311D Excavator Machine System Specifications

Load Control Valve (Boom)
311D Excavator Machine System Specifications

Cylinder Guard
311D Excavator Machine System Specifications

Blade Lift Cylinder
311D Excavator Machine System Specifications

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Systems Operation

Cylinders (Boom, Stick and Bucket)
311D Excavator Hydraulic System

Blade Hydraulic System
311D Excavator Hydraulic System

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Testing and Adjusting

Cylinder Drift - Check - Empty Bucket
311D Excavator Hydraulic System

Cylinder Drift - Check - Loaded Bucket
311D Excavator Hydraulic System

Cylinder Speed - Check - Blade (If Equipped)
311D Excavator Hydraulic System

Cylinder Speed - Check
311D Excavator Hydraulic System

Boom Down Regeneration (PRV) - Calibrate
311D Excavator Hydraulic System

Bench Test Procedures

Disassembly and Assembly

Blade Cylinder - Remove and Install
311D LRR Excavator Machine Systems

Stick Cylinder - Remove and Install
311D LRR Excavator Machine Systems

Bucket Cylinder - Remove and Install
311D LRR Excavator Machine Systems

Boom Cylinder - Remove and Install
311D LRR Excavator Machine Systems

Service Magazine

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}

Caterpillar Parts SIS Catalog 311D LRR :

295-2006 CYLINDER GP-BUCKET

289-8086 CYLINDER GP-BUCKET

289-7699 CYLINDER GP-BUCKET

283-6176 CYLINDER GP-BOOM

326-4451 CYLINDER GP-BLADE

326-4445 CYLINDER GP-BLADE

274-2683 CYLINDER GP-BLADE

274-2682 CYLINDER GP-BLADE

273-4147 CYLINDER GP-COUPLER

300-6024 CYLINDER GP-COUPLER

289-7726 CYLINDER GP-STICK

169-5549 DRIVE GP-SWING

267-6841 DRIVE GP-SWING

267-6842 DRIVE GP-SWING

267-6846 DRIVE GP-SWING

Truck sale:

89,181

Caterpillar 311 D LRR, Construction
- Crawler Excavators
WESTRAC
Western Australia, Australia

90,000

Caterpillar 311DLRR, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC

98,500

Caterpillar 311DLRR, Construction
- Crawler Excavators
OHIO CAT

89,000

Caterpillar 311DLRR, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC

$57,905 USD

CATERPILLAR 311DLRR 2011
- TRACK EXCAVATORS
GOUGH CAT
16 Branston Street - Christchurch -