ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP49480200
299-2697: WIRING GP-CAB
299-2697 WIRING GP-CAB -GRADE CONTROL
S/N DDW1-UP
PART OF 301-2552, 301-2555 SPECIAL AR
AN ATTACHMENT
S/N DDW1-UP
PART OF 301-2552, 301-2555 SPECIAL AR
AN ATTACHMENT
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [9] | STRAP-CABLE | |
| 2. | 7K-1181 | [22] | STRAP-CABLE | |
| 3. | 113-8491 | [2] | FUSE (15-AMPERE) | |
| 4. | 204-1790 | [3] | RESISTOR AS | |
| 5. | 283-3074 | [1] | SWITCH AS-TOGGLE (ACCUGRADE BACKUP) | |
| 6. | 299-2701 | [1] | HARNESS AS-CAB | |
| 7. | 299-2841 | [1] | HARNESS AS-SOLENOID | |
| 8. | 299-2952 | [1] | SHEET AS | |
| 9. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 10. | 7X-2619 M | [6] | BOLT (M6X1X10-MM) | |
| 11. | 9X-8256 | [9] | WASHER (6.6X12X2-MM THK) | |
| 12. | 251-0602 | [1] | BRACKET | |
| 13. | 163-6795 | [1] | STRAP-CABLE | |
| 14. | 9X-2042 M | [3] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| M | METRIC PART | |||
#SEBP49480201
328-0048: WIRING GP-CAB
328-0048 WIRING GP-CAB -WORK AREA VISUAL SYSTEM, REAR
S/N DDW1-UP
PART OF 330-8747 CAMERA AR
AN ATTACHMENT
S/N DDW1-UP
PART OF 330-8747 CAMERA AR
AN ATTACHMENT
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [13] | STRAP-CABLE | |
| 2. | 7K-1181 | [16] | STRAP-CABLE | |
| 3. | 306-8590 | [1] | HARNESS AS-WIRING (WORK AREA VISUAL SYSTEM, REAR) | |
| 4. | 327-9998 | [1] | HARNESS AS-AUXILIARY (WORK AREA VISUAL SYSTEM, REAR) | |
| 3S-2093 | [1] | STRAP-CABLE | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3963 | [2] | TERMINAL-BULLET (FEMALE) | ||
| 125-7875 BE | TUBE-HEAT SHRINK (7.44-MM DIA) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP49480202
336-6334: WIRING GP-CAB
336-6334 WIRING GP-CAB -GRADE CONTROL
S/N DDW1-UP
PART OF 346-4463 SPECIAL AR
AN ATTACHMENT
S/N DDW1-UP
PART OF 346-4463 SPECIAL AR
AN ATTACHMENT
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [6] | STRAP-CABLE | |
| 2. | 7K-1181 | [20] | STRAP-CABLE | |
| 3. | 113-8491 | [1] | FUSE (15-AMPERE) | |
| 4. | 204-1790 | [3] | RESISTOR AS | |
| 5. | 259-4939 | [1] | RECEPTACLE AS | |
| 8T-8737 | [6] | PLUG-SEAL | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 6. | 299-2701 | [1] | HARNESS AS-CAB | |
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| 176-9299 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 8L-8413 | [2] | STRAP-CABLE (WHITE) | ||
| 8T-8737 | [19] | PLUG-SEAL | ||
| 9W-0844 | [9] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 BE | TUBE-HEAT SHRINK (10.85-MM DIA) | |||
| 125-7874 BE | TUBE-HEAT SHRINK (5.72-MM DIA) | |||
| 125-7875 BE | TUBE-HEAT SHRINK (7.44-MM DIA) | |||
| 9X-3402 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 153-2602 | [6] | RECEPTACLE-CONNECTOR (1-PIN) | ||
| 153-2631 | [6] | TERMINAL (FEMALE) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 170-6890 | [2] | TERMINAL-BLADE (14-GA) | ||
| 174-3016 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 230-5008 | [3] | PLUG AS-CONNECTOR (4-PIN) | ||
| 230-5010 | [2] | PLUG AS-CONNECTOR (6-PIN) | ||
| 243-4507 | [3] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 243-5362 | [1] | CAP-DUST | ||
| 248-5358 | [1] | PLUG AS-CONNECTOR (39-PIN) | ||
| 253-2695 | [1] | PLUG AS-CONNECTOR | ||
| 287-8404 | [1] | CAP AS-DUST | ||
| 7. | 299-2952 | [1] | SHEET AS | |
| 8. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 9. | 7X-2619 M | [6] | BOLT (M6X1X10-MM) | |
| 10. | 9X-8256 | [9] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49480203
328-0080: WIRING GP-CAMERA
328-0080 WIRING GP-CAMERA -WORK AREA VISUAL SYSTEM, REAR
S/N DDW1-UP
PART OF 330-8747 CAMERA AR
AN ATTACHMENT
S/N DDW1-UP
PART OF 330-8747 CAMERA AR
AN ATTACHMENT
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS#SEBP49480204
306-8535: WIRING GP-CHASSIS
306-8535 WIRING GP-CHASSIS -ACCUGRADE
S/N DDW1-UP
PART OF 301-2552, 301-2555 SPECIAL AR
Type 1
AN ATTACHMENT
S/N DDW1-UP
PART OF 301-2552, 301-2555 SPECIAL AR
Type 1
AN ATTACHMENT
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [36] | STRAP-CABLE | |
| 2. | 7K-1181 | [21] | STRAP-CABLE | |
| 3. | 111-4836 | [2] | CLIP | |
| 4. | 111-4837 | [1] | CLIP | |
| 5. | 116-0118 | [1] | CLIP | |
| 6. | 306-8537 | [1] | HARNESS AS-CHASSIS | |
| 7. | 306-8657 | [1] | SUPPORT AS | |
| 8. | 309-5790 | [1] | BRACKET AS | |
| 9. | 4P-7581 | [3] | CLIP (LADDER) | |
| 10. | 8D-1470 | [2] | GROMMET | |
| 11. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 13. | 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | |
| M | METRIC PART | |||
#SEBP49480205
306-8535: WIRING GP-CHASSIS
306-8535 WIRING GP-CHASSIS -ACCUGRADE
S/N DDW1-UP
PART OF 301-2552, 301-2555, 346-4463 SPECIAL AR
Type 2
AN ATTACHMENT
S/N DDW1-UP
PART OF 301-2552, 301-2555, 346-4463 SPECIAL AR
Type 2
AN ATTACHMENT
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [36] | STRAP-CABLE | |
| 2. | 7K-1181 | [21] | STRAP-CABLE | |
| 3. | 111-4836 | [2] | CLIP | |
| 4. | 111-4837 | [1] | CLIP | |
| 5. | 116-0118 | [1] | CLIP | |
| 6. | 342-3151 C | [1] | HARNESS AS-CHASSIS | |
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3R-9965 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 3S-2093 | [10] | STRAP-CABLE | ||
| 6D-5257 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 8L-8413 | [4] | STRAP-CABLE (WHITE) | ||
| 8T-8737 | [87] | PLUG-SEAL | ||
| 9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 104-6871 | [2] | CAP-DUST | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [13] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 BE | TUBE-HEAT SHRINK (10.85-MM DIA) | |||
| 125-7874 BE | TUBE-HEAT SHRINK (5.72-MM DIA) | |||
| 125-7875 BE | TUBE-HEAT SHRINK (7.44-MM DIA) | |||
| 9X-3402 | [34] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 176-9299 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [39] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 174-3016 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| 230-4009 | [6] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [2] | PLUG AS-CONNECTOR (6-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 243-4508 | [2] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 243-4510 | [6] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 243-5362 | [2] | CAP-DUST | ||
| 253-2695 | [1] | PLUG AS-CONNECTOR | ||
| 262-8088 E | HOSE (70-CM) | |||
| 7. | 306-8657 | [1] | SUPPORT AS | |
| 8. | 309-5790 | [1] | BRACKET AS | |
| 9. | 4P-7581 | [3] | CLIP (LADDER) | |
| 10. | 8D-1470 | [2] | GROMMET | |
| 11. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 13. | 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49480206
283-2604: WIRING GP-COMMUNICATION
283-2604 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N DDW1-UP
PART OF 301-2584 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
S/N DDW1-UP
PART OF 301-2584 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [6] | STRAP-CABLE | |
| 2. | 7K-1181 | [12] | STRAP-CABLE | |
| 3. | 111-4837 | [1] | CLIP | |
| 4. | 116-0118 | [2] | CLIP | |
| 5. | 259-4887 Y | [1] | HARNESS AS-WIRING (PRODUCT LINK) | |
| 6. | 259-4940 Y | [1] | HARNESS AS-WIRING (SERVICE CONNECTOR) | |
| 7. | 319-1149 | [1] | HARNESS AS-CONTROL | |
| 8. | 132-5789 | [1] | CLIP (LADDER) | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49480207
283-2605: WIRING GP-COMMUNICATION
283-2605 WIRING GP-COMMUNICATION -PRODUCT LINK 121SR
S/N DDW1-UP
PART OF 301-2583 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
S/N DDW1-UP
PART OF 301-2583 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
#SEBP49480208
231-1836: WIRING GP-CONSOLE
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [1] | STRAP-CABLE | |
| 3. | 163-6795 | [2] | STRAP-CABLE | |
| 4. | 251-0580 | [1] | HARNESS AS-CONSOLE | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [9] | STRAP-CABLE | ||
| 5P-5995 D | TUBE (0.3-M) | |||
| 7Y-3963 | [2] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [2] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [11] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 247-2693 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP49480209
251-0433: WIRING GP-CONSOLE
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Operation and Maintenance Manual
Special Instruction
Procedure to Install 316-9110 Hydraulic Kit on Certain Excavators{1408, 5057, 5264, 5479, 6129}
Procedure to Install 316-9110 Hydraulic Kit on Certain Excavators{1408, 5057, 5264, 5479, 6129}
Procedure to Install 316-9110 Hydraulic Kit on Certain Excavators{1408, 5057, 5264, 5479, 6129}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Rework Procedure for Heater Cable Assembly on Certain 311D Through 319D Excavators{1090}
Rework Procedure for Heater Cable Assembly on Certain 311D Through 319D Excavators{1090}
Rework Procedure for Heater Cable Assembly on Certain 311D Through 319D Excavators{1090}
Installation Procedure for 283-2619 Medium Pressure Wiring for Certain Hydraulic Excavators{1408}
Installation Procedure for 283-2619 Medium Pressure Wiring for Certain Hydraulic Excavators{1408}
Installation Procedure for 283-2619 Medium Pressure Wiring for Certain Hydraulic Excavators{1408}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Installation Procedure for the 291-7880 Boom Wiring on Certain Hydraulic Excavators {1408}
Installation Procedure for the 291-7880 Boom Wiring on Certain Hydraulic Excavators {1408}
Installation Procedure for the 291-7880 Boom Wiring on Certain Hydraulic Excavators {1408}
Retrofitting Boom Lowering Control Valve/Stick Lowering Control Valve on 311D Excavators {1408, 5057, 5059, 5456, 5458, 7405, 7557}
Retrofitting Boom Lowering Control Valve/Stick Lowering Control Valve on 311D Excavators {1408, 5057, 5059, 5456, 5458, 7405, 7557}
Retrofitting Boom Lowering Control Valve/Stick Lowering Control Valve on 311D Excavators {1408, 5057, 5059, 5456, 5458, 7405, 7557}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Relays
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System
Senders
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System
Sensors
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System
Switches
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
Sensors
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
Relays
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
Switches
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System
Testing and Adjusting
Electrical Connector - Inspect
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
Wiring Harness (Open Circuit) - Test
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
Electrical Connector - Inspect
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Wiring Harness (Open Circuit) - Test
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Wiring Harness (Short Circuit) - Test
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
Connector Contact Description
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
AccuGrade® GPS / Single UTS / Site and Laser Reference v11 for Excavators
System Schematic
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
Troubleshooting
MID 039 - CID 0096 - FMI 05
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 0096 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 0586 - FMI 05
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 0586 - FMI 12
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 0588 - FMI 09
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 2280 - FMI 03
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 0588 - FMI 12
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
Electrical Component and Connector Locations
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
MID 039 - CID 2300 - FMI 09
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System
Disassembly and Assembly
Service Magazine
Inspection Procedure for Switch Panel on Certain Excavators {1408, 7301, 7305, 7306, 7310}
2009/03/09
2009/03/09
Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
2010/04/22
2010/04/22
New Torque Specification for Position Sensor on 3054E, C6.6, and C4.4 Machine Engines {1408, 1907}
2012/02/16
2012/02/16
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
The Control Panel Assembly has been Improved for Certain 311D to 349D Excavators {1408, 7301}
2014/03/27
2014/03/27
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Caterpillar Parts SIS Catalog 311D LRR :
Truck sale:
$57,905 USD




