WORK TOOLS
BUCKET GPCOUPLER GP-QUICK
GROUND ENGAGING TOOLS (G.E.T.)
WORK TOOLS
BUCKET GP
#SEBP49480660
442-1786: BUCKET AR-DITCH CLEANING
442-1786 BUCKET AR-DITCH CLEANING
S/N DDW1-UP
1800-MM (72-IN) WIDE X 0.68-CU M (0.89-CU YD) CAPACITY
AN ATTACHMENT
S/N DDW1-UP
1800-MM (72-IN) WIDE X 0.68-CU M (0.89-CU YD) CAPACITY
AN ATTACHMENT
For full view, you need register
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS#SEBP49480661
305-1595: BUCKET AS-GENERAL PURPOSE
305-1595 BUCKET AS-GENERAL PURPOSE
S/N DDW1-UP
750-MM (30-IN) WIDE X 0.4-CU M (0.5-CU YD) CAPACITY. J-250 ADAPTERS, (5X)
PART OF 229-7651 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N DDW1-UP
750-MM (30-IN) WIDE X 0.4-CU M (0.5-CU YD) CAPACITY. J-250 ADAPTERS, (5X)
PART OF 229-7651 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
#SEBP49480662
439-7332: BUCKET GP-DITCH CLEANING
439-7332 BUCKET GP-DITCH CLEANING
S/N DDW1-UP
1800-MM (72-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY
AN ATTACHMENT
S/N DDW1-UP
1800-MM (72-IN) WIDE X 0.90-CU M (1.18-CU YD) CAPACITY
AN ATTACHMENT
For full view, you need register
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 2. | 439-7364 | [1] | BUCKET AS-DITCH CLEANING | |
| 3. | 441-6631 | [1] | EDGE AS-CUTTING | |
| 3A. | 8J-8141 | [1] | EDGE-CUTTING | |
| 4. | 442-1818 | [1] | EDGE | |
| 5. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 6. | 442-1793 | [2] | PLATE-SIDE BAR | |
| 7. | 442-1795 | [2] | PLATE (CORNER) | |
| 8. | 442-1825 | [1] | PLATE-WEAR | |
| 9. | 442-1826 | [2] | PLATE-WEAR | |
| 10. | 442-1831 | [1] | PLATE AS-HINGE |
#SEBP49480663
439-7333: BUCKET GP-DITCH CLEANING
439-7333 BUCKET GP-DITCH CLEANING
S/N DDW1-UP
2000-MM (78-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY
PART OF 439-7311 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
S/N DDW1-UP
2000-MM (78-IN) WIDE X 1.0-CU M (1.31-CU YD) CAPACITY
PART OF 439-7311 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
For full view, you need register
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 2. | 439-7365 | [1] | BUCKET AS-DITCH CLEANING | |
| 2A. | 442-1819 | [1] | EDGE | |
| 2B. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 2C. | 442-1793 | [2] | PLATE-SIDE BAR | |
| 2D. | 442-1795 | [2] | PLATE (CORNER) | |
| 2E. | 442-1827 | [1] | PLATE-WEAR | |
| 2F. | 442-1828 | [2] | PLATE-WEAR | |
| 2G. | 442-1832 | [1] | PLATE AS-HINGE |
#SEBP49480664
439-7340: BUCKET GP-DITCH CLEANING
439-7340 BUCKET GP-DITCH CLEANING
S/N DDW1-UP
1800-MM (72-IN) WIDE X 0.68-CU M (0.89-CU YD) CAPACITY
PART OF 439-7312 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
S/N DDW1-UP
1800-MM (72-IN) WIDE X 0.68-CU M (0.89-CU YD) CAPACITY
PART OF 439-7312 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
For full view, you need register
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 2. | 439-7369 | [1] | BUCKET AS-DITCH CLEANING | |
| 2A. | 442-1826 | [2] | PLATE-WEAR | |
| 2B. | 442-1847 | [1] | EDGE | |
| 2C. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 2D. | 442-1795 | [2] | PLATE (CORNER) | |
| 2E. | 442-1855 | [2] | PLATE-SIDE BAR | |
| 2F. | 442-1858 | [1] | PLATE-WEAR | |
| 2G. | 442-1860 | [1] | PLATE AS-HINGE |
#SEBP49480665
439-7355: BUCKET GP-DITCH CLEANING
439-7355 BUCKET GP-DITCH CLEANING
S/N DDW1-UP
1800-MM (72-IN) WIDE X 0.68-CU M (0.89-CU YD) CAPACITY
PART OF 442-1786 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
S/N DDW1-UP
1800-MM (72-IN) WIDE X 0.68-CU M (0.89-CU YD) CAPACITY
PART OF 442-1786 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
For full view, you need register
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 2. | 439-7398 | [1] | BUCKET AS-DITCH CLEANING | |
| 3. | 442-1826 | [2] | PLATE-WEAR | |
| 4. | 442-1847 | [1] | EDGE | |
| 5. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 6. | 442-1795 | [2] | PLATE (CORNER) | |
| 7. | 442-1855 | [2] | PLATE-SIDE BAR | |
| 8. | 442-1858 | [1] | PLATE-WEAR | |
| 9. | 442-1862 | [1] | PLATE AS-HINGE |
#SEBP49480666
282-5536: COUPLER AR-QUICK
For full view, you need register
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS#SEBP49480667
282-5537: COUPLER AR-QUICK
For full view, you need register
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS#SEBP49480668
236-4153: COUPLER GP-QUICK
236-4153 COUPLER GP-QUICK
S/N DDW1-UP
PART OF 253-6396 LINES GP-COUPLER
AN ATTACHMENT
S/N DDW1-UP
PART OF 253-6396 LINES GP-COUPLER
AN ATTACHMENT
For full view, you need register
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 273-4147 Y | [1] | CYLINDER GP-COUPLER | |
| 2. | 256-9793 | [1] | HOOK | |
| 3. | 256-9792 | [1] | PIN | |
| 4. | 256-9790 | [1] | PIN | |
| 5. | 256-9791 | [1] | PIN | |
| 6. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 7. | 201-3663 | [1] | SPRING | |
| 8. | 184-7495 | [1] | BEARING | |
| 9. | 256-9788 | [1] | BAR | |
| 10. | 273-4148 | [1] | BAR | |
| 11. | 256-9786 | [2] | CLIP | |
| 12. | 256-9787 | [4] | CLIP | |
| 13. | 273-4149 | [1] | PLATE-RETAINING | |
| 14. | 8C-6364 M | [2] | BOLT-SOCKET HEAD (M5X0.8X14-MM) | |
| 15. | Z | [1] | COUPLER AS-QUICK | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP49480669
442-5338: EDGE GP-CUTTING
442-5338 EDGE GP-CUTTING
S/N DDW1-UP
PART OF 439-7312, 442-1786 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
S/N DDW1-UP
PART OF 439-7312, 442-1786 BUCKET AR-DITCH CLEANING
AN ATTACHMENT
For full view, you need register
Parts for your 311D LRR EXCAVATOR:
CATERPILLAR SISInformation:
WORK TOOLS
BUCKET GP
Operation and Maintenance Manual
Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Service Magazine
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
A Procedure to Weld Bucket Adjuster Group Flange in Place for Use with Quick Couplers on Certain 311 to 349 Excavators {0679, 6001, 6503, 6513, 6531, 6700}
Caterpillar Parts SIS Catalog 311D LRR :
Truck sale:
$57,905 USD