308-8788 FRAME GP-UPPER S/N JBC1-UP; HCW1-UP PART OF 330-8811, 346-4465 SPECIAL AR Type 2 AN ATTACHMENT 312D



FRAME AND BODY
FRAME GP
GEAR & BEARING GP

EXCAVATOR 312D EXCAVATOR HCW
 312D & 312D L Excavators HCW00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP4949 312D HCW   (2008)

FRAME AND BODY

FRAME GP
FRAME GP-UPPER
278-9259 FRAME GP-UPPER
FRAME GP-UPPER
278-9259 FRAME GP-UPPER
FRAME GP-UPPER
278-9259 FRAME GP-UPPER
FRAME GP-UPPER
278-9259 FRAME GP-UPPER
FRAME GP-UPPER
308-8788 FRAME GP-UPPER
FRAME GP-UPPER
308-8788 FRAME GP-UPPER
FRAME GP-UPPER
308-8788 FRAME GP-UPPER
 

#SEBP49490440
 

308-8788: FRAME GP-UPPER

308-8788 FRAME GP-UPPER
S/N JBC1-UP; HCW1-UP
PART OF 330-8811, 346-4465 SPECIAL AR
Type 2
AN ATTACHMENT
i04310090 SEBP4949
3088788 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0349 [1] WASHER (22X60X6-MM THK)  
7. 093-0357 [2] SPACER (63X100X9-MM THK)  
8. 093-0363 [1] SPACER (83X120X12-MM THK)  
9. 133-2425 B [2] SHIM (0.5-MM THK)  
10. 133-2717 B [4] SHIM (0.5-MM THK)  
11. 212-2837 [2] SHIM (2-MM THK)  
12. 245-7900 [1] CAP  
13. 245-7901 [1] CAP  
14. 352-9639 C [1] FRAME AS-UPPER  
14A. 7Y-0633 [1] BOSS  
14B. 186-5639 [1] STEP AS  
15. 308-8807 [1] PIN AS  
16. 308-8914 [1] PLATE  
17. 086-0297 [2] WASHER (13X50X6-MM THK)  
18. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
19. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
21. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
22. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
   
    THE FOLLOWING REPAIR PART IS AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  180-7614 F [1] PLATE-SKIRT (1100-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP49490441
 

308-8788: FRAME GP-UPPER

308-8788 FRAME GP-UPPER
S/N JBC1-UP; HCW1-UP
PART OF 330-8811, 346-4465 SPECIAL AR
Type 3
AN ATTACHMENT
i04991850 SEBP4949
3088788 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0349 [1] WASHER (22X60X6-MM THK)  
7. 093-0357 [2] SPACER (63X100X9-MM THK)  
9. 133-2425 B [2] SHIM (0.5-MM THK)  
10. 133-2717 B [4] SHIM (0.5-MM THK)  
11. 212-2837 [2] SHIM (2-MM THK)  
12. 245-7900 [1] CAP  
13. 245-7901 [1] CAP  
14. 385-3257 C [1] FRAME AS-UPPER  
14A. 186-5639 [1] STEP AS  
15. 385-3225 C [1] PIN AS  
16. 308-8914 [1] PLATE  
17. 086-0297 [2] WASHER (13X50X6-MM THK)  
18. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
19. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
21. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
22. 453-2845 CM [1] BOLT (M20X2.5X40-MM)  
   
    THE FOLLOWING REPAIR PART IS AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  180-7614 F [1] PLATE-SKIRT (1100-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP49490442
 

169-5567: GEAR & BEARING GP-SWING

169-5567 GEAR & BEARING GP-SWING
S/N JBC1-UP; HCW1-UP
PART OF 260-7056, 260-7057 FRAME AR-UNDERCARRIAGE
Type 1
i01441479 SEBP4949
1695567 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 4I-7511 [1] RETAINER  
2. 4I-7512 [1] CLAMP-HOSE  
3. 4I-7444 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 7X-2555 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP (LOOP)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 169-5568 [1] TUBE AS  
15. 229-1077 Y [1] GEAR & BEARING GP-SWING (127-BEARING)  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 1U-8846 B SEALANT-GASKET  
19. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49490443
 

169-5567: GEAR & BEARING GP-SWING

169-5567 GEAR & BEARING GP-SWING
S/N JBC1-UP; HCW1-UP
PART OF 260-7056, 260-7057 FRAME AR-UNDERCARRIAGE
Type 2
i04886985 SEBP4949
1695567 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 4I-7511 [1] RETAINER  
2. 4I-7512 [1] CLAMP-HOSE  
3. 4I-7444 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 447-1708 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP (LOOP)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 169-5568 [1] TUBE AS  
15. 378-9588 CY [1] GEAR & BEARING GP-SWING  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49490444
 

199-4573: GEAR & BEARING GP-SWING

199-4573 GEAR & BEARING GP-SWING
S/N JBC1-UP; HCW1-UP
PART OF 260-7124, 260-7125, 301-2453, 301-2454 INSTALLATION AR-BLADE
Type 1
AN ATTACHMENT
i01678913 SEBP4949
1994573 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 121-5204 [1] RETAINER  
2. 099-0913 [1] CLAMP-HOSE  
3. 121-5203 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 7X-2555 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP (LOOP)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 169-5568 [1] TUBE AS  
15. 229-1077 Y [1] GEAR & BEARING GP-SWING (127-BEARING)  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 1U-8846 B SEALANT-GASKET  
19. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49490445
 

199-4573: GEAR & BEARING GP-SWING

199-4573 GEAR & BEARING GP-SWING
S/N JBC1-UP; HCW1-UP
PART OF 260-7124, 260-7125, 301-2453, 301-2454 INSTALLATION AR-BLADE
Type 2
AN ATTACHMENT
i04846373 SEBP4949
1994573 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 121-5204 [1] RETAINER  
2. 099-0913 [1] CLAMP-HOSE  
3. 121-5203 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 447-1708 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP (LOOP)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 169-5568 [1] TUBE AS  
15. 378-9588 CY [1] GEAR & BEARING GP-SWING (127-BEARING)  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49490446
 

229-1077: GEAR & BEARING GP-SWING

229-1077 GEAR & BEARING GP-SWING
S/N JBC1-UP; HCW1-UP
PART OF 169-5567, 199-4573 GEAR & BEARING GP-SWING
ALSO AN ATTACHMENT
i04861899 SEBP4949
2291077 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 229-1078 [1] SEAL-DUST  
3. 148-4685 E SEAL ((309-CM))  
  E   ORDER BY THE CENTIMETER
 

#SEBP49490447
 

378-9588: GEAR & BEARING GP-SWING

378-9588 GEAR & BEARING GP-SWING
S/N JBC1-UP; HCW1-UP
PART OF 169-5567, 199-4573 GEAR & BEARING GP-SWING
ALSO AN ATTACHMENT
i04862049 SEBP4949
3789588 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 229-1078 [1] SEAL-DUST  
3. 148-4685 E SEAL (309-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP49490448
 

378-9596: GEAR & BEARING GP-SWING

378-9596 GEAR & BEARING GP-SWING
S/N JBC1-UP; HCW1-UP
PART OF 260-7056, 260-7057 FRAME AR-UNDERCARRIAGE
i04937380 SEBP4949
3789596 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 4I-7444 [1] BOOT  
2. 4I-7446 [1] GASKET  
3. 4I-7511 [1] RETAINER  
4. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
5. 378-9598 Y [1] GEAR & BEARING GP-SWING  
6. 227-6186 [38] SPACER (16.6X32X26-MM THK)  
7. 095-1299 [1] DOWEL  
8. 4I-7326 [1] STRIP  
9. 4I-7512 [1] CLAMP-HOSE  
10. 447-1708 M [34] BOLT (M16X2X80-MM)  
11. 8T-0357 M [38] BOLT (M16X2X70-MM)  
12. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49490449
 

378-9597: GEAR & BEARING GP-SWING

378-9597 GEAR & BEARING GP-SWING
S/N JBC1-UP; HCW1-UP
PART OF 260-7124, 260-7125, 301-2453, 301-2454, 385-4066, 385-4067, 385-4068, 385-4074 INSTALLATION AR-BLADE
AN ATTACHMENT
i04844209 SEBP4949
3789597 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 4I-7446 [1] GASKET  
2. 121-5203 [1] BOOT  
3. 121-5204 [1] RETAINER  
4. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
5. 378-9598 Y [1] GEAR & BEARING GP-SWING  
6. 227-6186 [38] SPACER (16.6X32X26-MM THK)  
7. 095-1299 [1] DOWEL  
8. 099-0913 [1] CLAMP-HOSE  
9. 4I-7326 [1] STRIP  
10. 447-1708 M [34] BOLT (M16X2X80-MM)  
11. 8T-0357 M [38] BOLT (M16X2X70-MM)  
12. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Undercarriage - Check
312D and 313D Excavators
Specifications
Upper Frame
312D and 313D Excavators Machine System Specifications
Upper Frame
312D and 313D Excavators Machine System Specifications
Disassembly and Assembly
Undercarriage Frame - Remove
312D and 313D Excavators Machine Systems
Undercarriage Frame - Install
312D and 313D Excavators Machine Systems
Service Magazine
Skirt Material for the Repair of the Upper Frame Is Available {7051}
2010/05/13
Front Linkage Clearance has been Improved on Certain Excavators {7051}
2011/04/19

Caterpillar Parts SIS Catalog 312D :

FRAME GP-UPPER
308-8788 FRAME GP-UPPER
FRAME GP-UPPER
278-9259 FRAME GP-UPPER
FRAME GP-UPPER
278-9259 FRAME GP-UPPER
FRAME GP-UPPER
278-9259 FRAME GP-UPPER
FRAME GP-UPPER
278-9259 FRAME GP-UPPER
FENDER & COVER GP
330-1163 FENDER & COVER GP
FENDER & COVER GP
244-8041 FENDER & COVER GP
ENCLOSURE GP-ENGINE
283-3593 ENCLOSURE GP-ENGINE
FRAME GP-UPPER
308-8788 FRAME GP-UPPER
GEAR & BEARING GP-SWING
169-5567 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
169-5567 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
199-4573 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
199-4573 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
229-1077 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9588 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9596 GEAR & BEARING GP-SWING