AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

229-9100 CAB GP S/N JBC1-UP; HCW1-UP AN ATTACHMENT 312D EXCAVATOR


OPERATOR STATION
CAB GP

EXCAVATOR 312D EXCAVATOR HCW
 312D & 312D L Excavators HCW00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP4949 312D HCW   (2008)

OPERATOR STATION

CAB GP
CAB GP
229-9098 CAB GP
CAB GP
229-9099 CAB GP
CAB GP
229-9100 CAB GP
CAB GP
229-9101 CAB GP
CAB GP
235-8908 CAB GP
CAB GP
235-8908 CAB GP
 

#SEBP49491200
 

229-9100: CAB GP

229-9100 CAB GP
S/N JBC1-UP; HCW1-UP
AN ATTACHMENT
i02216150 SEBP4949
2299100 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-2135 M [5] SCREW-TRUSS HEAD (M6X1X13-MM)  
2. 164-8474 [2] LOUVER AS-VENT  
3. 229-9101 Y [1] CAB GP  
4. 234-6501 Y [1] COVER GP-CAB (REAR)  
5. 235-9001 [1] SUPPORT  
6. 8T-4179 M [5] BOLT (M12X1.75X20-MM)  
7. 8T-4190 M [4] BOLT (M16X2X25-MM)  
8. 8T-4223 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
10. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
11. 8Y-6967 [2] LOUVER AS-VENT  
12. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491201
 

229-9101: CAB GP

229-9101 CAB GP
S/N JBC1-UP; HCW1-UP
PART OF 229-9100 CAB GP
AN ATTACHMENT
i02216151 SEBP4949
2299101 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] CAB AS  
1A. 185-8182 M [6] BOLT (M10X1.5X20-MM)  
1B. 185-8187 [6] WASHER (10.2X22X3.2-MM THK)  
1C. 151-6777 [2] HINGE  
1D. 9X-2041 M [6] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
2. 235-8910 Y [1] CAB GP (EXTERIOR)  
3. 235-8908 Y [1] CAB GP (INTERIOR)  
4. 235-8915 Y [1] WINDOW GP-CAB (SIDE, REAR)  
5. 234-6594 Y [1] WIPER GP-WINDOW (FRONT, UPPER)  
6. 189-2793 Y [1] DOOR & MTG GP-CAB  
7. 139-7101 JY [1] WINDOW GP-CAB (FRONT, UPPER)  
8. 176-1958 Y [1] WINDOW GP-CAB (FRONT, LOWER)  
9. 139-7099 Y [1] HATCH GP-ROOF  
   
  171-7503 FJY [1] WINDOW GP-CAB (FRONT, UPPER)  
  207-0144 FJY [1] WINDOW GP-CAB (FRONT, UPPER)  
  F   NOT SHOWN
  J   ITEMS MARKED J AVAILABLE FOR SERVICE REPAIR OF WINDOW GP MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491202
 

235-8908: CAB GP

235-8908 CAB GP -INTERIOR
S/N JBC1-UP; HCW1-UP
PART OF 229-9099, 229-9101, 336-1136, 346-8053, 346-8054 CAB GP
Type 1
AN ATTACHMENT
i02211905 SEBP4949
2358908 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-6352 [1] LOUVER AS  
2. 156-6656 [1] RAIL  
3. 156-6657 [1] RAIL  
4. 164-0646 [1] CUP  
5. 164-0655 [1] PANEL-SWITCH  
6. 164-8474 [2] LOUVER AS-VENT  
7. 170-9724 [5] CLIP  
8. 171-7420 [6] CLIP  
9. 176-1946 [1] PLATE  
10. 176-1947 [1] PLATE  
11. 176-1972 [1] COVER  
12. 185-8214 [1] BRACKET AS  
13. 189-2678 [3] SPACER  
14. 234-6468 [1] COVER AS  
15. 234-6470 [1] COVER-MONITOR  
16. 234-6471 [1] COVER-DUCT  
17. 234-6472 [1] COVER  
18. 234-6473 [1] COVER-FRONT (UPPER, RH)  
19. 234-6474 [1] COVER-CONSOLE (UPPER, RH)  
20. 305-0330 [1] COVER (LOWER, RH)  
21. 234-6476 [1] DUCT  
22. 234-6477 [1] BRACKET AS  
23. 305-0333 [1] BRACKET  
24. 234-6480 [1] BRACKET AS  
25. 234-6483 [1] BRACKET AS  
26. 234-6485 [1] BRACKET AS  
27. 234-6490 [1] CUP  
28. 234-6491 [1] COVER  
29. 234-6497 [1] COVER  
30. 234-6498 [3] RIVET  
31. 234-6521 [1] COVER  
32. 234-6547 [1] COVER  
33. 234-6548 [1] COVER  
34. 234-6549 [1] COVER  
35. 234-6550 [1] COVER  
36. 234-6579 [2] NUT-SPEED  
37. 235-8922 [1] COVER  
38. 235-8923 [2] CAP  
39. 383-5706 [1] VISOR  
40. 235-8928 [1] LINER  
41. 235-8929 [2] HANDLE  
42. 185-8205 [5] CLIP  
43. 235-8950 [10] CLIP  
44. 245-7790 [2] SCREW-TAPPING  
45. 128-2135 M [13] SCREW-TRUSS HEAD (M6X1X13-MM)  
46. 128-2136 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
47. 189-2855 [1] COVER  
48. 234-6469 [1] COVER  
49. 9X-2042 M [23] SCREW-TRUSS HEAD (M6X1X12-MM)  
50. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
  M   METRIC PART
 

#SEBP49491203
 

235-8908: CAB GP

235-8908 CAB GP -INTERIOR
S/N JBC1-UP; HCW1-UP
PART OF 229-9099, 229-9101, 336-1136, 346-8053, 346-8054 CAB GP
Type 2
AN ATTACHMENT
i05228924 SEBP4949
2358908 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-6352 [1] LOUVER AS  
2. 156-6656 [1] RAIL  
3. 156-6657 [1] RAIL  
4. 164-0646 [1] CUP  
5. 164-0655 [1] PANEL-SWITCH  
6. 164-8474 [2] LOUVER AS-VENT  
7. 170-9724 [5] CLIP  
8. 171-7420 [6] CLIP  
9. 176-1946 [1] PLATE  
10. 176-1947 [1] PLATE  
11. 176-1972 [1] COVER  
12. 185-8214 [1] BRACKET AS  
13. 189-2678 [3] SPACER  
14. 234-6468 [1] COVER AS  
15. 234-6470 [1] COVER-MONITOR  
16. 234-6471 [1] COVER-DUCT  
17. 234-6472 [1] COVER  
18. 234-6473 [1] COVER-FRONT (UPPER, RH)  
19. 234-6474 [1] COVER-CONSOLE (UPPER, RH)  
20. 305-0330 [1] COVER (LOWER, RH)  
21. 234-6476 [1] DUCT  
22. 234-6477 [1] BRACKET AS  
23. 305-0333 [1] BRACKET  
24. 234-6480 [1] BRACKET AS  
25. 234-6483 [1] BRACKET AS  
26. 234-6485 [1] BRACKET AS  
27. 234-6490 [1] CUP  
28. 234-6491 [1] COVER  
29. 234-6497 [1] COVER  
30. 234-6498 [3] RIVET  
31. 234-6521 [1] COVER  
32. 234-6547 [1] COVER  
33. 234-6548 [1] COVER  
34. 234-6549 [1] COVER  
35. 234-6550 [1] COVER  
36. 234-6579 [2] NUT-SPEED  
37. 235-8922 [1] COVER  
38. 235-8923 [2] CAP  
39. 383-5706 [1] VISOR  
40. 235-8928 [1] LINER  
42. 185-8205 [5] CLIP  
43. 235-8950 [10] CLIP  
44. 245-7790 [2] SCREW-TAPPING  
45. 128-2135 M [13] SCREW-TRUSS HEAD (M6X1X13-MM)  
46. 128-2136 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
47. 189-2855 [1] COVER  
48. 234-6469 [1] COVER  
49. 9X-2042 M [23] SCREW-TRUSS HEAD (M6X1X12-MM)  
50. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
51. 8R-1803 [1] WASHER (10.5X18X1-MM THK)  
  M   METRIC PART
 

#SEBP49491204
 

235-8910: CAB GP

235-8910 CAB GP -EXTERIOR
S/N JBC1-UP; HCW1-UP
PART OF 229-9099, 229-9101, 316-8815 CAB GP
Type 1
AN ATTACHMENT
i02503145 SEBP4949
2358910 CAB GP Parts scheme 2358910 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER  
2. 139-7127 [1] HOLDER  
3. 156-6599 [1] STRIKER  
4. 161-3685 [1] ROD  
5. 235-8933 [1] HANDLE AS  
6. 161-3697 [1] GUARD  
7. 164-0523 [1] LEVER AS  
8. 164-0527 [1] ROD  
9. 164-0528 Y [1] LEVER GP-CAB DOOR  
10. 167-7018 [1] COVER AS  
11. 167-7042 [2] SEAL  
12. 171-7426 [1] CABLE AS  
13. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
14. 176-1942 [1] COVER  
15. 178-5570 [2] GROMMET  
16. 185-8196 [1] GROMMET  
17. 189-2704 [1] SEAL  
18. 189-3396 M [5] NUT (M10X1.5-THD)  
19. 189-3409 [3] WASHER  
20. 201-4530 [1] BRACKET AS  
21. 205-6295 [1] LATCH AS  
22. 210-5808 [1] SEAL  
23. 235-8912 [1] HANDLE AS  
24. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
25. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
26. 133-8016 [1] PACKING  
27. 156-6617 [1] MIRROR  
28. 259-7295 CY [1] BRACKET GP-MIRROR  
29. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)(DOME)  
30. 1R-5998 [2] LOCKWASHER  
31. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
32. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 3E-9874 M [2] SCREW-OVAL HEAD  
34. 4I-1205 [2] BUMPER  
35. 4I-1206 [2] GUIDE  
36. 4I-3063 [1] SPRING  
37. 4I-3123 M [2] BOLT (M10X1.5X20-MM)  
38. 4I-3144 [2] WASHER-HARD (10.2X22X3.2-MM THK)  
39. 4I-4270 [1] HOLDER-GLASS  
40. 4I-4392 [3] CLIP  
41. 5C-7793 [1] HOOK-COAT  
42. 6V-7636 [4] PIN AS-SPRING  
43. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
    -OR-
  099-3607 [2] WASHER-HARD (10.2X30X3.2-MM THK)  
44. 8T-4779 CM [1] BOLT (M16X2X35-MM)  
45. 9X-2041 M [1] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
46. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
47. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
48. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
49. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
50. 6I-5470 E SEAL (150-CM)  
51. 085-6452 [2] WASHER  
52. 105-2169 [2] BOLT AS  
53. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
54. 4I-3090 [4] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491205
 

235-8910: CAB GP

235-8910 CAB GP -EXTERIOR
S/N JBC1-UP; HCW1-UP
PART OF 229-9099, 229-9101, 316-8815, 336-1136 CAB GP
Type 2
AN ATTACHMENT
i03087760 SEBP4949
2358910 CAB GP Parts scheme 2358910 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER  
2. 139-7127 [1] HOLDER  
3. 156-6599 [1] STRIKER  
4. 161-3685 [1] ROD  
5. 450-4908 [1] HANDLE AS  
6. 161-3697 [1] GUARD  
7. 164-0523 [1] LEVER AS  
8. 164-0527 [1] ROD  
9. 164-0528 Y [1] LEVER GP-CAB DOOR  
10. 167-7018 [1] COVER AS  
11. 167-7042 [2] SEAL  
12. 171-7426 [1] CABLE AS  
13. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
14. 176-1942 [1] COVER  
15. 178-5570 [2] GROMMET  
16. 185-8196 [1] GROMMET  
17. 189-2704 [1] SEAL  
18. 8T-4133 M [5] NUT (M10X1.5-THD)  
19. 4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
20. 201-4530 [1] BRACKET AS  
21. 205-6295 [1] LATCH AS  
22. 416-4309 [1] SEAL  
23. 235-8912 [1] HANDLE AS  
24. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
25. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
26. 133-8016 [1] PACKING  
27. 327-6550 CY [1] MIRROR GP-REAR VIEW  
28. 346-7375 Y [1] MOUNTING GP-MIRROR  
29. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)(DOME)  
30. 1R-5998 [4] LOCKWASHER  
31. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
32. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 3E-9874 M [2] SCREW-OVAL HEAD  
34. 4I-1205 [2] BUMPER  
35. 4I-1206 [2] GUIDE  
36. 4I-3063 [1] SPRING  
37. 4I-3123 M [2] BOLT (M10X1.5X20-MM)  
38. 4I-3144 [2] WASHER-HARD (10.2X22X3.2-MM THK)  
39. 4I-4270 [1] HOLDER-GLASS  
40. 4I-4392 [3] CLIP  
41. 5C-7793 [1] HOOK-COAT  
42. 6V-7636 [4] PIN AS-SPRING  
43. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
44. 8T-4779 M [1] BOLT (M16X2X35-MM)  
45. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
46. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
47. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
48. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
49. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
50. 6I-5470 E SEAL (140-CM)  
52. 105-2169 [2] BOLT AS  
53. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
54. 4I-3090 [4] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491206
 

235-8910: CAB GP

235-8910 CAB GP -EXTERIOR
S/N JBC1-UP; HCW1-UP
PART OF 229-9099, 229-9101, 316-8815, 336-1136 CAB GP
Type 3
AN ATTACHMENT
i06048996 SEBP4949
2358910 CAB GP Parts scheme 2358910 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER  
2. 139-7127 [1] HOLDER  
3. 156-6599 [1] STRIKER  
4. 161-3685 [1] ROD  
5. 450-4908 [1] HANDLE AS  
6. 161-3697 [1] GUARD  
7. 164-0523 [1] LEVER AS  
8. 164-0527 [1] ROD  
9. 164-0528 Y [1] LEVER GP-CAB DOOR  
10. 167-7018 [1] COVER AS  
11. 167-7042 [2] SEAL  
12. 171-7426 [1] CABLE AS  
13. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
14. 176-1942 [1] COVER  
15. 178-5570 [2] GROMMET  
16. 185-8196 [1] GROMMET  
17. 189-2704 [1] SEAL  
18. 8T-4133 M [5] NUT (M10X1.5-THD)  
19. 4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
20. 201-4530 [1] BRACKET AS  
21. 383-5666 [1] LATCH AS  
22. 416-4309 [1] SEAL  
23. 235-8912 [1] HANDLE AS  
24. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
25. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
26. 133-8016 [1] PACKING  
27. 443-7858 CY [1] MIRROR GP-REAR VIEW  
28. 346-7375 Y [1] MOUNTING GP-MIRROR  
29. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)(DOME)  
30. 1R-5998 [4] LOCKWASHER  
31. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
32. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 3E-9874 M [2] SCREW-OVAL HEAD  
34. 4I-1205 [2] BUMPER  
35. 4I-1206 [2] GUIDE  
36. 4I-3063 [1] SPRING  
37. 4I-3123 M [2] BOLT (M10X1.5X20-MM)  
38. 7X-7729 C [2] WASHER (11X25X3-MM THK)  
39. 4I-4270 [1] HOLDER-GLASS  
40. 4I-4392 [3] CLIP  
41. 5C-7793 [1] HOOK-COAT  
42. 6V-7636 [4] PIN AS-SPRING  
43. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
44. 451-2180 CM [1] BOLT (M16X2X35-MM)  
45. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
46. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
47. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
48. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
49. 451-2175 C [1] WASHER-HARD (17.5X30X3.5-MM THK)  
50. 6I-5470 E SEAL (140-CM)  
52. 105-2169 [2] BOLT AS  
53. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
54. 4I-3090 [4] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491207
 

235-8910: CAB GP

235-8910 CAB GP -EXTERIOR
S/N JBC1-UP; HCW1-UP
PART OF 229-9099, 229-9101, 316-8815, 336-1136 CAB GP
Type 4
AN ATTACHMENT
i06651198 SEBP4949
2358910 CAB GP Parts scheme 2358910 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER  
2. 139-7127 [1] HOLDER  
3. 156-6599 [1] STRIKER  
4. 161-3685 [1] ROD  
5. 450-4908 [1] HANDLE AS  
6. 161-3697 [1] GUARD  
7. 164-0523 [1] LEVER AS  
8. 164-0527 [1] ROD  
9. 164-0528 Y [1] LEVER GP-CAB DOOR  
10. 167-7018 [1] COVER AS  
11. 167-7042 [2] SEAL  
12. 171-7426 [1] CABLE AS  
13. 176-1939 [1] LEVER AS  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
14. 176-1942 [1] COVER  
15. 178-5570 [2] GROMMET  
16. 185-8196 [1] GROMMET  
17. 189-2704 [1] SEAL  
18. 8T-4133 M [5] NUT (M10X1.5-THD)  
19. 4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
20. 201-4530 [1] BRACKET AS  
21. 383-5666 [1] LATCH AS  
22. 416-4309 [1] SEAL  
23. 235-8912 [1] HANDLE AS  
24. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
25. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
26. 133-8016 [1] PACKING  
27. 394-9460 CY [1] MIRROR GP  
28. 346-7375 Y [1] MOUNTING GP-MIRROR  
29. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)(DOME)  
30. 1R-5998 [4] LOCKWASHER  
31. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
32. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
33. 3E-9874 M [2] SCREW-OVAL HEAD  
34. 4I-1205 [2] BUMPER  
35. 4I-1206 [2] GUIDE  
36. 4I-3063 [1] SPRING  
37. 4I-3123 M [2] BOLT (M10X1.5X20-MM)  
38. 7X-7729 [2] WASHER (11X25X3-MM THK)  
39. 4I-4270 [1] HOLDER-GLASS  
40. 4I-4392 [3] CLIP  
41. 5C-7793 [1] HOOK-COAT  
42. 6V-7636 [4] PIN AS-SPRING  
43. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
44. 451-2180 M [1] BOLT (M16X2X35-MM)  
45. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
46. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
47. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
48. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
49. 451-2175 [1] WASHER-HARD (17.5X30X3.5-MM THK)  
50. 6I-5470 E SEAL (140-CM)  
52. 105-2169 [2] BOLT AS  
53. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
54. 4I-3090 [4] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491208
 

235-8917: CAB GP

235-8917 CAB GP -INTERIOR
S/N JBC1-UP; HCW1-UP
PART OF 316-8815 CAB GP
AN ATTACHMENT
i02783571 SEBP4949
2358917 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8Y-6352 [1] LOUVER AS  
2. 164-0646 [1] CUP  
3. 164-0655 [1] PANEL-SWITCH  
4. 164-8474 [2] LOUVER AS-VENT  
5. 170-9724 [5] CLIP  
6. 171-7420 [10] CLIP  
7. 176-1972 [1] COVER  
8. 185-8205 [7] CLIP  
9. 185-8214 [1] BRACKET AS  
10. 189-2678 [3] SPACER  
11. 189-2853 [1] COVER  
12. 189-2854 [1] COVER  
13. 234-6468 [1] COVER AS  
  259-7353 [4] CLIP  
14. 234-6470 [1] COVER-MONITOR  
15. 234-6471 [1] COVER-DUCT  
16. 234-6472 [1] COVER  
17. 234-6473 [1] COVER-FRONT (UPPER, RH)  
18. 234-6474 [1] COVER-CONSOLE (UPPER, RH)  
20. 234-6476 [1] DUCT  
21. 234-6477 [1] BRACKET AS  
23. 234-6480 [1] BRACKET AS  
24. 234-6483 [1] BRACKET AS  
25. 234-6485 [1] BRACKET AS  
26. 234-6490 [1] CUP  
27. 234-6491 [1] COVER  
28. 234-6497 [1] COVER  
29. 234-6498 [3] RIVET  
30. 234-6521 [1] COVER  
31. 234-6547 [1] COVER  
32. 234-6548 [1] COVER  
33. 234-6549 [1] COVER  
34. 234-6550 [1] COVER  
35. 234-6579 [2] NUT-SPEED  
36. 235-8922 [1] COVER  
37. 235-8923 [2] CAP  
38. 235-8930 [1] LINER  
39. 235-8950 C [10] CLIP  
40. 245-7790 [2] SCREW-TAPPING  
41. 128-2135 M [13] SCREW-TRUSS HEAD (M6X1X13-MM)  
42. 128-2136 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
43. 189-2855 [1] COVER  
44. 234-6469 [1] COVER  
45. 9X-2042 M [23] SCREW-TRUSS HEAD (M6X1X12-MM)  
46. 305-0333 C [1] BRACKET  
47. 305-0330 C [1] COVER (LOWER, RH)  
48. 8R-1803 [1] WASHER (10.5X18X1-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP49491209
 

316-8814: CAB GP

316-8814 CAB GP
S/N JBC1-UP; HCW1-UP
AN ATTACHMENT
i02884426 SEBP4949
3168814 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-2135 M [5] SCREW-TRUSS HEAD (M6X1X13-MM)  
2. 164-8474 [2] LOUVER AS-VENT  
3. 316-8815 Y [1] CAB GP  
4. 234-6501 Y [1] COVER GP-CAB (REAR)  
5. 235-9001 [1] SUPPORT  
6. 8T-4179 M [5] BOLT (M12X1.75X20-MM)  
7. 8T-4190 M [4] BOLT (M16X2X25-MM)  
8. 8T-4223 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4910 M [6] BOLT (M12X1.75X60-MM)  
10. 8T-6868 M [2] BOLT (M12X1.75X80-MM)  
11. 8Y-6967 [2] LOUVER AS-VENT  
12. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Cab Air Filter (Fresh Air) - Clean/Replace
312D and 313D Excavators
Roof Hatch
312D and 313D Excavators
Operator Station
312D and 313D Excavators
Work Tool Control (Two-Way Flow) - If Equipped
312D and 313D Excavators
Work Tool Control (One-Way Flow) - If Equipped
312D and 313D Excavators
Windows - Clean
312D and 313D Excavators
Sun Screen - If Equipped
312D and 313D Excavators
Operator Controls
312D and 313D Excavators
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Technical Information Bulletin
Procedure to Install Bosses for Attaching Vandal Guards on Certain Excavators with ROPS Cabs{7301, 7315, 7325}
Procedure to Install Bosses for Attaching Vandal Guards on Certain Excavators with ROPS Cabs{7301, 7315, 7325}
Specifications
Cab
312D and 313D Excavators Machine System Specifications
Cab
312D and 313D Excavators Machine System Specifications
Cab - Protection Visor
312D and 313D Excavators Machine System Specifications
Cab - Rear Window
312D and 313D Excavators Machine System Specifications
Disassembly and Assembly
Cab - Remove
312D and 313D Excavators Machine Systems
Cab - Install
312D and 313D Excavators Machine Systems
Service Magazine
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557}
2009/04/20
Correct Handling and Removal Procedure of the Console Cover {5258, 7301, 7325}
2009/02/23
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02

Caterpillar Parts SIS Catalog 312D :

CAB GP
229-9099 CAB GP
CAB GP
229-9098 CAB GP
BRACKET GP-MOUNTING
245-7890 BRACKET GP-MOUNTING
BRACKET GP-MIRROR
259-7295 BRACKET GP-MIRROR
ARMREST GP
259-7347 ARMREST GP
ARMREST GP
259-7346 ARMREST GP
AIR CONDITIONER GP
316-8916 AIR CONDITIONER GP
AIR CONDITIONER GP
316-8811 AIR CONDITIONER GP
CAB GP
229-9101 CAB GP
CAB GP
235-8908 CAB GP
CAB GP
235-8908 CAB GP
CAB GP
235-8910 CAB GP
CAB GP
235-8910 CAB GP
CAB GP
235-8910 CAB GP
CAB GP
235-8910 CAB GP
CAB GP
235-8917 CAB GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.