AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

346-8058 CAB GP -EXTERIOR S/N JBC1-UP; HCW1-UP PART OF 346-8053, 346-8054 CAB GP Type 2 AN ATTACHMENT 312D


OPERATOR STATION
CAB GP
AIR CONDITIONER GP

EXCAVATOR 312D EXCAVATOR HCW
 312D & 312D L Excavators HCW00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP4949 312D HCW   (2008)

OPERATOR STATION

CAB GP
CAB GP
346-8054 CAB GP
CAB GP
346-8058 CAB GP
CAB GP
346-8058 CAB GP
CAB GP
346-8058 CAB GP
FLOOR MAT
284-4376 FLOOR MAT
FLOOR MAT
284-4377 FLOOR MAT
 

#SEBP49491220
 

346-8058: CAB GP

346-8058 CAB GP -EXTERIOR
S/N JBC1-UP; HCW1-UP
PART OF 346-8053, 346-8054 CAB GP
Type 2
AN ATTACHMENT
i06643328 SEBP4949
3468058 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER (FRONT)  
2. 139-7127 [1] HOLDER (REAR)  
3. 156-6599 [1] STRIKER  
4. 161-3685 [1] ROD  
5. 161-3697 [1] GUARD  
6. 164-0523 [1] LEVER AS (BOTTOM)  
7. 164-0527 [1] ROD  
8. 164-0528 Y [1] LEVER GP-CAB DOOR (TOP)  
9. 167-7018 [1] COVER AS  
10. 167-7042 [2] SEAL  
11. 171-7426 [1] CABLE AS  
12. 176-1939 [1] LEVER AS (MIDDLE)  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
13. 178-5570 [2] GROMMET  
14. 185-8196 [1] GROMMET  
15. 189-2704 [1] SEAL  
16. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
17. 4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
18. 201-4530 [1] BRACKET AS  
19. 383-5666 [1] LATCH AS  
20. 416-4309 [1] SEAL  
21. 235-8912 [1] HANDLE AS (SIDE)  
22. 450-4908 [1] HANDLE AS (FRONT)  
23. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
24. 315-5313 [1] COVER  
25. 443-7858 CY [1] MIRROR GP-REAR VIEW  
26. 346-7375 Y [1] MOUNTING GP-MIRROR  
27. 451-2175 C [1] WASHER-HARD (17.5X30X3.5-MM THK)  
28. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
30. 105-2169 [2] BOLT AS  
31. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
32. 133-8016 [1] PACKING  
33. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)  
34. 1R-5998 [4] LOCKWASHER  
35. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
36. 095-0755 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
37. 4I-1205 [2] BUMPER  
38. 4I-1206 [2] GUIDE  
39. 4I-3063 [1] SPRING  
40. 4I-3090 [4] SEAL  
41. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
42. 7X-7729 C [2] WASHER (11X25X3-MM THK)  
43. 4I-4270 [1] HOLDER-GLASS  
44. 4I-4392 [3] CLIP  
45. 5C-7793 [1] HOOK-COAT  
46. 6V-7636 [4] PIN AS-SPRING  
47. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
48. 8T-4133 M [5] NUT (M10X1.5-THD)  
49. 451-2180 CM [1] BOLT (M16X2X35-MM)  
50. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
51. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
52. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
53. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
54. 6I-5470 E SEAL (140-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491221
 

346-8058: CAB GP

346-8058 CAB GP -EXTERIOR
S/N JBC1-UP; HCW1-UP
PART OF 346-8053, 346-8054 CAB GP
Type 3
AN ATTACHMENT
i06668771 SEBP4949
3468058 CAB GP Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-7126 [1] HOLDER (FRONT)  
2. 139-7127 [1] HOLDER (REAR)  
3. 156-6599 [1] STRIKER  
4. 161-3685 [1] ROD  
5. 161-3697 [1] GUARD  
6. 164-0523 [1] LEVER AS (BOTTOM)  
7. 164-0527 [1] ROD  
8. 164-0528 Y [1] LEVER GP-CAB DOOR (TOP)  
9. 167-7018 [1] COVER AS  
10. 167-7042 [2] SEAL  
11. 171-7426 [1] CABLE AS  
12. 176-1939 [1] LEVER AS (MIDDLE)  
  9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  176-1937 [1] BRACKET AS  
  176-1938 [1] LEVER  
13. 178-5570 [2] GROMMET  
14. 185-8196 [1] GROMMET  
15. 189-2704 [1] SEAL  
16. 189-2864 M [2] SCREW-FLAT HEAD (M8X1.25X30-MM)  
17. 4B-4278 [3] WASHER (10.2X20.5X1.6-MM THK)  
18. 201-4530 [1] BRACKET AS  
19. 205-6295 [1] LATCH AS  
20. 416-4309 [1] SEAL  
21. 235-8912 [1] HANDLE AS (SIDE)  
22. 450-4908 [1] HANDLE AS (FRONT)  
23. 284-4426 M [1] BOLT-WING (M8X1.25X15-MM)  
24. 315-5313 [1] COVER  
25. 394-9460 CY [1] MIRROR GP  
26. 346-7375 Y [1] MOUNTING GP-MIRROR  
27. 451-2175 [1] WASHER-HARD (17.5X30X3.5-MM THK)  
28. 099-0823 M [3] SCREW-MACHINE (M6X1X6-MM)  
30. 105-2169 [2] BOLT AS  
31. 127-0580 M [2] SCREW-FLAT HEAD (M8X1.25X20-MM)  
32. 133-8016 [1] PACKING  
33. 176-1986 [1] LAMP AS-DOME  
  201-4417 [1] LAMP (24-VOLT, 10-WATT)  
34. 1R-5998 [4] LOCKWASHER  
35. 3E-8020 M [6] SCREW-TRUSS HEAD (M6X1X25-MM)  
36. 095-0755 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
37. 4I-1205 [2] BUMPER  
38. 4I-1206 [2] GUIDE  
39. 4I-3063 [1] SPRING  
40. 4I-3090 [4] SEAL  
41. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
42. 7X-7729 [2] WASHER (11X25X3-MM THK)  
43. 4I-4270 [1] HOLDER-GLASS  
44. 4I-4392 [3] CLIP  
45. 5C-7793 [1] HOOK-COAT  
46. 6V-7636 [4] PIN AS-SPRING  
47. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
48. 8T-4133 M [5] NUT (M10X1.5-THD)  
49. 451-2180 M [1] BOLT (M16X2X35-MM)  
50. 9X-2041 M [3] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
51. 9X-2042 M [5] SCREW-TRUSS HEAD (M6X1X12-MM)  
52. 9X-2044 M [5] SCREW-TRUSS HEAD (M6X1X16-MM)  
53. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
54. 6I-5470 E SEAL (140-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491222
 

245-7836: COIL GP-EVAPORATOR

245-7836 COIL GP-EVAPORATOR
S/N JBC1-UP; HCW1-UP
PART OF 316-8811, 316-8916 AIR CONDITIONER GP
FIELD REPLACEMENT ORDER @@@@@353-2151@@@@@
AN ATTACHMENT
i02218138 SEBP4949
2457836 COIL GP-EVAPORATOR Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 245-7837 [1] VALVE AS-EXPANSION  
2. 245-7905 [1] INSULATOR  
3. 281-0791 M [2] BOLT-SOCKET HEAD (M5X0.8X40-MM)  
4. 121-7136 [1] SEAL-O-RING  
5. 121-7137 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP49491223
 

353-2151: COIL GP-EVAPORATOR

353-2151 COIL GP-EVAPORATOR
S/N JBC1-UP; HCW1-UP
FIELD REPLACEMENT FOR @@@@@245-7836@@@@@
i03975520 SEBP4949
3532151 COIL GP-EVAPORATOR Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 245-7837 [1] VALVE AS-EXPANSION  
2. 245-7905 [1] INSULATOR  
3. 281-0791 M [2] BOLT-SOCKET HEAD (M5X0.8X40-MM)  
4. 121-7136 [1] SEAL-O-RING  
5. 121-7137 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP49491224
 

259-7244: COMPRESSOR GP-REFRIGERANT

259-7244 COMPRESSOR GP-REFRIGERANT
S/N JBC1-UP; HCW1-UP
PART OF 310-9499 COMPRESSOR GP-REFRIGERANT
i02416798 SEBP4949
2597244 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-7286 [1] COIL AS (24-VOLT)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
2. 264-9982 B [1] WASHER (6.2X12.2X0.1-MM THK)  
3. 264-9983 B [1] WASHER (6.2X12.2X0.3-MM THK)  
4. 264-9984 B [1] WASHER (6.2X12.2X0.5-MM THK)  
  B   USE AS REQUIRED
 

#SEBP49491225
 

310-9499: COMPRESSOR GP-REFRIGERANT

310-9499 COMPRESSOR GP-REFRIGERANT
S/N JBC1-917; HCW1-427
PART OF 279-7794 INSTALLATION AR-ENGINE
i02794494 SEBP4949
3109499 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-9863 [1] PULLEY  
2. 255-3016 [1] V-BELT (REFRIGERANT COMPRESSOR)  
3. 255-3018 Y [1] PULLEY GP-IDLER  
4. 259-7244 Y [1] COMPRESSOR GP-REFRIGERANT  
5. 324-4168 [1] BRACKET AS  
6. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
7. 8T-3647 M [4] BOLT (M8X1.25X80-MM)  
8. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4172 M [3] BOLT (M10X1.5X80-MM)  
10. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
11. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
13. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491226
 

310-9499: COMPRESSOR GP-REFRIGERANT

310-9499 COMPRESSOR GP-REFRIGERANT
S/N JBC918-UP; HCW428-UP
PART OF 279-7794 INSTALLATION AR-ENGINE
i03983071 SEBP4949
3109499 COMPRESSOR GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 310-9694 [1] PULLEY  
2. 255-3016 [1] V-BELT (REFRIGERANT COMPRESSOR)  
3. 327-7193 CY [1] PULLEY GP-IDLER  
4. 259-7244 Y [1] COMPRESSOR GP-REFRIGERANT  
5. 324-4168 [1] BRACKET AS  
6. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
7. 8T-3647 M [4] BOLT (M8X1.25X80-MM)  
8. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4172 M [3] BOLT (M10X1.5X80-MM)  
10. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
11. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
13. 8T-4910 M [2] BOLT (M12X1.75X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491227
 

273-5349: CONDENSER & MTG GP-REFRIGERANT

273-5349 CONDENSER & MTG GP-REFRIGERANT
S/N JBC1-1360; HCW1-550
PART OF 279-7794 INSTALLATION AR-ENGINE
i02801923 SEBP4949
2735349 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-8561 [1] BUMPER  
2. 193-2764 [1] HANDLE AS  
3. 245-7749 Y [1] CONDENSER GP-REFRIGERANT  
4. 305-0433 [1] SUPPORT AS  
5. 284-4411 [1] SUPPORT AS  
6. 305-0435 [1] SUPPORT AS  
7. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4133 M [1] NUT (M10X1.5-THD)  
9. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
10. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
11. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4971 M [4] BOLT (M6X1X30-MM)  
13. 117-8929 [4] WASHER (6.6X22X2-MM THK)  
14. 305-0439 [2] SUPPORT AS  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491228
 

273-5349: CONDENSER & MTG GP-REFRIGERANT

273-5349 CONDENSER & MTG GP-REFRIGERANT
S/N JBC1361-UP; HCW551-UP
PART OF 279-7794 INSTALLATION AR-ENGINE
i04259949 SEBP4949
2735349 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-8561 [1] BUMPER  
2. 357-4101 C [1] HANDLE AS (COMPRESSION)  
3. 245-7749 Y [1] CONDENSER GP-REFRIGERANT  
4. 363-9553 C [1] SUPPORT AS  
5. 284-4411 [1] SUPPORT AS  
6. 363-9555 C [1] SUPPORT AS  
7. 8T-4121 C [5] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4133 M [1] NUT (M10X1.5-THD)  
9. 8T-4137 CM [4] BOLT (M10X1.5X20-MM)  
10. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
11. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4971 M [4] BOLT (M6X1X30-MM)  
13. 117-8929 [4] WASHER (6.6X22X2-MM THK)  
14. 305-0439 [2] SUPPORT AS  
15. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
16. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 5P-8523 C [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49491229
 

293-1248: CONDENSER & MTG GP-REFRIGERANT

293-1248 CONDENSER & MTG GP-REFRIGERANT
S/N JBC1-UP; HCW1-UP
AN ATTACHMENT
i02828840 SEBP4949
2931248 CONDENSER & MTG GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your 312D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 245-7749 Y [1] CONDENSER GP-REFRIGERANT  
2. 293-1249 [1] SUPPORT AS  
3. 305-0313 [1] SUPPORT AS  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
6. 8T-4971 M [4] BOLT (M6X1X30-MM)  
7. 117-8929 [4] WASHER (6.6X22X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Cab Air Filter (Fresh Air) - Clean/Replace
312D and 313D Excavators
Roof Hatch
312D and 313D Excavators
Operator Station
312D and 313D Excavators
Work Tool Control (Two-Way Flow) - If Equipped
312D and 313D Excavators
Work Tool Control (One-Way Flow) - If Equipped
312D and 313D Excavators
Windows - Clean
312D and 313D Excavators
Sun Screen - If Equipped
312D and 313D Excavators
Operator Controls
312D and 313D Excavators
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Technical Information Bulletin
Procedure to Install Bosses for Attaching Vandal Guards on Certain Excavators with ROPS Cabs{7301, 7315, 7325}
Procedure to Install Bosses for Attaching Vandal Guards on Certain Excavators with ROPS Cabs{7301, 7315, 7325}
Specifications
Cab
312D and 313D Excavators Machine System Specifications
Cab
312D and 313D Excavators Machine System Specifications
Cab - Protection Visor
312D and 313D Excavators Machine System Specifications
Cab - Rear Window
312D and 313D Excavators Machine System Specifications
Disassembly and Assembly
Cab - Remove
312D and 313D Excavators Machine Systems
Cab - Install
312D and 313D Excavators Machine Systems
Service Magazine
Ordering a Replacement Operator Protective Structure (OPS) Certification Film {7323, 7325, 7405, 7557}
2009/04/20
Correct Handling and Removal Procedure of the Console Cover {5258, 7301, 7325}
2009/02/23
Improved Procedure for the Retention of the Identification Film for the Roll Over Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) {7323, 7325, 7405, 7557}
2009/07/27
A Procedure for Replacing Bonded Windows on All Caterpillar Products Is Now Available {7310}
2009/11/02

Caterpillar Parts SIS Catalog 312D :

CAB GP
346-8058 CAB GP
CAB GP
346-8054 CAB GP
CAB GP
346-8053 CAB GP
CAB GP
346-8041 CAB GP
CAB GP
346-8041 CAB GP
CAB GP
346-8038 CAB GP
CAB GP
346-8037 CAB GP
CAB GP
336-1147 CAB GP
CAB GP
346-8058 CAB GP
COIL GP-EVAPORATOR
245-7836 COIL GP-EVAPORATOR
COIL GP-EVAPORATOR
353-2151 COIL GP-EVAPORATOR
COMPRESSOR GP-REFRIGERANT
259-7244 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
310-9499 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
310-9499 COMPRESSOR GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
273-5349 CONDENSER & MTG GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
273-5349 CONDENSER & MTG GP-REFRIGERANT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.