291-7713 WIRING GP-PLATFORM S/N BYJ1-UP; PDP1-UP PART OF 301-2529 SPECIAL AR-OFFSET BOOM Type 1 AN ATTACHMENT 314D LCR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 291-7713 WIRING GP-
1. 291-7713 WIRING GP-
2. 283-2610 WIRING GP-
3. 350-8147 WIRING GP-
4. 291-7498 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

5. 277-6695 DRIVE GP-F
6. 278-6920 DRIVE GP-F
7. 332-7499 DRIVE GP-F
8. 332-7499 DRIVE GP-F
9. 332-7500 DRIVE GP-F
0. INFORMATION

EXCAVATOR 314D LCR EXCAVATOR BYJ
314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP4950 314D LCR BYJ (2008)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

291-7712 WIRING GP-PLATFORM

291-7713 WIRING GP-PLATFORM

283-2610 WIRING GP-QUICK COUPLER

350-8147 WIRING GP-RADIO

#SEBP49500340

291-7713: WIRING GP-PLATFORM

WIRING GP-PLATFORM

291-7713 WIRING GP-PLATFORM
S/N BYJ1-UP; PDP1-UP
PART OF 301-2529 SPECIAL AR-OFFSET BOOM
Type 1
AN ATTACHMENT

i03439121 SEBP4950

For full view, you need register

Parts for your 314D LCR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[7]	STRAP-CABLE
3.	342-3289	[1]	STRAP AS-GROUND
4.	7K-1181	[5]	STRAP-CABLE
5.	104-8161	[1]	GROMMET
6.	111-4836	[14]	CLIP
7.	116-0118	[7]	CLIP
8.	301-7292	[1]	KIT-SERVICE METER
			(INCLUDES SERVICE METER & FILM)
9.	267-7933	[1]	BRACKET AS
10.	267-7937	[1]	BRACKET AS
11.	267-7950	[1]	HARNESS AS-CONTROL (PUMP, SECONDARY SHUTDOWN)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	131-1501	[1]	TERMINAL AS (14-GA TO 16-GA)
	2L-8074	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
12.	291-7686	[1]	HARNESS AS-SOLENOID
	8T-8737	[3]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	9X-3402	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES RECEPTACALE AS, WEDGE & INTERFACE AEAL)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
13.	291-7714	[1]	BRACKET AS
14.	306-8379	[1]	BRACKET AS
15.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
16.	8T-4121	[23]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[11]	BOLT (M10X1.5X20-MM)
18.	8T-4191 M	[10]	BOLT (M10X1.5X16-MM)
19.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
20.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49500341

291-7713: WIRING GP-PLATFORM

WIRING GP-PLATFORM

291-7713 WIRING GP-PLATFORM
S/N BYJ1-UP; PDP1-UP
PART OF 301-2529, 419-4391 SPECIAL AR-OFFSET BOOM
Type 2
AN ATTACHMENT

i04026508 SEBP4950

For full view, you need register

Parts for your 314D LCR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[7]	STRAP-CABLE
3.	342-3289	[1]	STRAP AS-GROUND
4.	7K-1181	[5]	STRAP-CABLE
5.	104-8161	[1]	GROMMET
6.	111-4836	[14]	CLIP
7.	116-0118	[7]	CLIP
8.	366-4622 C	[1]	KIT-SERVICE METER (32-VOLT DC)(32-VOLT DC)
			(INCLUDES SERVICE METER & FILM)
9.	267-7933	[1]	BRACKET AS
10.	267-7937	[1]	BRACKET AS
11.	267-7950	[1]	HARNESS AS-CONTROL (PUMP, SECONDARY SHUTDOWN)
	2L-8074	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
12.	291-7686	[1]	HARNESS AS-SOLENOID
	8T-8737	[3]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	9X-3402	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES RECEPTACALE AS, WEDGE & INTERFACE AEAL)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
13.	291-7714	[1]	BRACKET AS
14.	306-8379	[1]	BRACKET AS
15.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
16.	8T-4121	[23]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[11]	BOLT (M10X1.5X20-MM)
18.	8T-4191 M	[10]	BOLT (M10X1.5X16-MM)
19.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
20.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49500342

283-2610: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

283-2610 WIRING GP-QUICK COUPLER
S/N PDP1-UP
PART OF 345-7978 KIT-COUPLER LINES
AN ATTACHMENT

i02796266 SEBP4950

2832610 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 314D LCR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	7K-1181	[8]	STRAP-CABLE
3.	116-0118	[1]	CLIP
4.	283-2597	[1]	HARNESS AS-SOLENOID

#SEBP49500343

350-8147: WIRING GP-RADIO

WIRING GP-RADIO

350-8147 WIRING GP-RADIO
S/N BYJ1-UP; PDP1-UP
PART OF 350-3368, 354-1110, 359-2552 OPTION AR-REGIONAL
CANNOT BE USED WITH @@@@@251-0538@@@@@
AN ATTACHMENT

i04030011 SEBP4950

For full view, you need register

Parts for your 314D LCR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181	[5]	STRAP-CABLE
3.	121-0987	[1]	SOCKET-AUXILIARY POWER (12-VOLT, 7-AMPERE)
4.	340-7160	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
5.	306-8324	[1]	HARNESS AS-SWITCH
	8T-8729	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[13]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3402	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	243-4506	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
6.	306-8327	[1]	HARNESS AS-WIRING
	8T-8729	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	153-2602	[1]	RECEPTACLE-CONNECTOR (1-PIN)
	153-2631	[1]	TERMINAL (14-GA TO 20-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
7.	207-0210	[1]	GROMMET
8.	8T-6693 M	[2]	SCREW-MACHINE (M5X0.8X16-MM)
9.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49500344

291-7498: WIRING GP-SENSOR

WIRING GP-SENSOR

291-7498 WIRING GP-SENSOR -OFFSET BOOM
S/N BYJ1-UP; PDP1-UP
PART OF 338-7794, 419-4367 BOOM AR
AN ATTACHMENT

i03437262 SEBP4950

For full view, you need register

Parts for your 314D LCR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[13]	STRAP-CABLE
2.	7I-2673	[1]	STRAP-CABLE
3.	111-4837	[1]	CLIP
4.	116-0118	[1]	CLIP
5.		[1]	GUARD
6.	291-7499 Y	[1]	HARNESS AS-SENSOR (OFFSET BOOM)
7.	4K-8302	[2]	CLIP (LOOP)
8.	4K-8864	[4]	CLIP (LOOP)
9.	7X-2621 M	[1]	BOLT (M10X1.5X12-MM)
10.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4133 M	[6]	NUT (M10X1.5-THD)
12.	175-7141 M	[1]	NUT-HEX FLANGE (M10X1.5-THD)
13.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49500345

277-6695: DRIVE GP-FINAL

DRIVE GP-FINAL

277-6695 DRIVE GP-FINAL -WITH MOTOR
S/N BYJ1-302; PDP1-185
PART OF 267-6827 POWER TRAIN AR
FIELD REPLACEMENT ORDER @@@@@332-7499@@@@@

i02794290 SEBP4950

For full view, you need register

Parts for your 314D LCR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	277-6697 Y	[1]	MOTOR GP-TRAVEL
2.	278-6920 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

#SEBP49500346

278-6920: DRIVE GP-FINAL

DRIVE GP-FINAL

278-6920 DRIVE GP-FINAL -WITHOUT MOTOR
S/N BYJ1-302; PDP1-185
PART OF 277-6695 DRIVE GP-FINAL

i02794291 SEBP4950

For full view, you need register

Parts for your 314D LCR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	094-0580	[1]	PLATE (10-MM THK)
2.	165-5854 M	[1]	RING-LOCKING
3.	165-5855	[4]	BEARING
4.	165-5856	[4]	GEAR (37-TEETH)
5.	165-5857	[4]	RACE
6.	165-5859	[3]	RACE
7.	165-5860	[1]	COVER
8.	307-9371	[1]	CARRIER
9.	165-5864	[1]	GEAR-SUN (17-TEETH)
10.	332-7486	[1]	PLATE
11.	165-5866	[1]	RING
12.	165-5867	[1]	GEAR (19-TEETH)
13.	165-5868	[1]	HOUSING
14.	332-7487	[1]	PLATE
15.	191-0862	[1]	PLATE-LOCK
16.	204-1086	[4]	PLATE
17.	218-4246	[3]	GEAR-PLANETARY (40-TEETH)
18.	218-4247	[2]	BEARING
19.	310-4980	[1]	SEAL GP-DUO-CONE
20.	278-1980	[3]	BEARING-CAGED
21.	3E-2338	[2]	PLUG-PIPE
22.	6V-7726 M	[4]	SCREW-HEX SOCKET (M10X1.5X25-MM)
23.	7M-8485	[2]	SEAL-O-RING
24.	8T-1158 M	[16]	BOLT-SOCKET HEAD (M8X1.25X20-MM)
25.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
26.	8T-4185 M	[3]	BOLT (M10X1.5X50-MM)
27.	1U-8846 B		SEALANT-GASKET
28.	9X-2027	[1]	WASHER (11X18X2-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP49500347

332-7499: DRIVE GP-FINAL

DRIVE GP-FINAL

332-7499 DRIVE GP-FINAL -WITH MOTOR
S/N BYJ303-UP; PDP1-185
ADDITIONAL FIELD REPLACEMENT PARTS LISTED (349-9520, 352-7197, 347-4171) REPLACE EXISTING TRAVEL COUNTERBALANCE VALVE, SPOOL & PISTON IN OPPOSITE TRAVEL MOTOR & MAIN CONTROL VALVE. REFER TO SEPD1376.
PART OF 267-6827 POWER TRAIN AR
FIELD REPLACEMENT ORDER @@@@@374-5972@@@@@, @@@@@349-9520@@@@@, @@@@@352-7197@@@@@, 2-374-4171 PISTON
FIELD REPLACEMENT FOR @@@@@277-6695@@@@@

i03653647 SEBP4950

For full view, you need register

Parts for your 314D LCR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	277-6697 Y	[1]	MOTOR GP-TRAVEL (FINAL DRIVE)
2.	332-7500 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP49500348

332-7499: DRIVE GP-FINAL

DRIVE GP-FINAL

332-7499 DRIVE GP-FINAL -WITH MOTOR
S/N BYJ303-351; PDP186-204
ADDITIONAL FIELD REPLACEMENT PARTS LISTED (349-9520, 352-7197, 347-4171) REPLACE EXISTING TRAVEL COUNTERBALANCE VALVE, SPOOL & PISTON IN OPPOSITE TRAVEL MOTOR & MAIN CONTROL VALVE. REFER TO SEPD1376.
PART OF 353-0506 DRIVE GP-FINAL, 267-6827 POWER TRAIN AR
FIELD REPLACEMENT ORDER @@@@@374-5972@@@@@, @@@@@349-9520@@@@@, @@@@@352-7197@@@@@, 2-374-4171 PISTON
FIELD REPLACEMENT FOR @@@@@277-6695@@@@@

i04254572 SEBP4950

For full view, you need register

Parts for your 314D LCR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	277-6697 Y	[1]	MOTOR GP-TRAVEL (FINAL DRIVE)
2.	352-8148 CY	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP49500349

332-7500: DRIVE GP-FINAL

DRIVE GP-FINAL

332-7500 DRIVE GP-FINAL -WITHOUT MOTOR
S/N BYJ303-UP; PDP1-185
PART OF 332-7499 DRIVE GP-FINAL

i03653650 SEBP4950

For full view, you need register

Parts for your 314D LCR EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	094-0580	[1]	PLATE (10-MM THK)
2.	094-1528	[3]	WASHER (53X84X1-MM THK)
3.	165-5854 M	[1]	RING-LOCKING
4.	165-5855	[4]	BEARING
5.	165-5856	[4]	GEAR (37-TEETH)
6.	165-5857	[4]	RACE
7.	165-5859	[3]	RACE
8.	165-5860	[1]	COVER
9.	165-5864	[1]	GEAR-SUN (17-TEETH)
10.	165-5866	[1]	RING
11.	165-5867	[1]	GEAR (19-TEETH)
12.	165-5868	[1]	HOUSING
13.	191-0862	[1]	PLATE-LOCK
14.	204-1086	[4]	PLATE
15.	218-4247	[2]	BEARING
16.	278-1980	[3]	BEARING-CAGED
17.	310-4980	[1]	SEAL GP-DUO-CONE
18.	332-7484	[1]	CARRIER
19.	332-7485	[3]	GEAR-PLANETARY (40-TEETH)
20.	332-7486	[1]	PLATE
21.	332-7487	[1]	PLATE
22.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
23.	6V-7726 M	[4]	SCREW-HEX SOCKET (M10X1.5X25-MM)
24.	7M-8485	[2]	SEAL-O-RING
25.	8T-1158 M	[16]	BOLT-SOCKET HEAD (M8X1.25X20-MM)
26.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
27.	8T-4185 M	[3]	BOLT (M10X1.5X50-MM)
28.	9X-2027	[1]	WASHER (11X18X2-MM THK)
29.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
314D Excavator

Battery - Recycle
314D Excavator

Service Hour Meter
314D Excavator

Power Receptacle - If Equipped
314D Excavator

Battery Disconnect Switch
314D Excavator

Fuses - Replace
314D Excavator

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Procedure to Install 316-9110 Hydraulic Kit on Certain Excavators{1408, 5057, 5264, 5479, 6129}
Procedure to Install 316-9110 Hydraulic Kit on Certain Excavators{1408, 5057, 5264, 5479, 6129}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Rework Procedure for Heater Cable Assembly on Certain 311D Through 319D Excavators{1090}
Rework Procedure for Heater Cable Assembly on Certain 311D Through 319D Excavators{1090}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System

Senders
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System

Sensors
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System

Switches
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Sensors
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Relays
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Switches
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Tool Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Testing and Adjusting

Electric Starting System - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Overload Warning - Set - If Equipped
314D Excavator Hydraulic System

Electrical Connector - Inspect
AccuGrade^® Site and Laser Reference System For Excavators

Wiring Harness (Open Circuit) - Test
AccuGrade^® Site and Laser Reference System For Excavators

Wiring Harness (Short Circuit) - Test
AccuGrade^® Site and Laser Reference System For Excavators

Wiring Harness (Short Circuit) - Test
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Electrical Connector - Inspect
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Connector Contact Description
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

System Schematic
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

MID 039 - CID 0096 - FMI 05
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Electrical Connectors
C4.2 and C6.4 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines

MID 039 - CID 0110 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Electrical Power Supply
AccuGrade^® Site and Laser Reference System For Excavators

MID 039 - CID 1178 - FMI 03
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

CAN Data Link
AccuGrade^® Site and Laser Reference System For Excavators

MID 039 - CID 0588 - FMI 12
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

Electrical Component and Connector Locations
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

CAN Data Link - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

MID 039 - CID 2300 - FMI 09
311D, 312D, 312D2, 313D, 313D2, 314D, 315D, 318D, 318D2 and 319D Excavators Machine Electronic Control System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Disassembly and Assembly

Battery - Remove and Install
314D CR Hydraulic Excavator
C4.2 Engine Supplement

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14

Inspection Procedure for Switch Panel on Certain Excavators {1408, 7301, 7305, 7306, 7310}
2009/03/09

A New Harness Assembly for the Right Hand Console is Now Available {1408}
2011/04/04