191-2596 GEAR & BEARING GP-SWING S/N BYJ1-UP; PDP1-UP PART OF 260-7185, 260-7186 FRAME AR-UNDERCARRIAGE 314D LCR



FRAME AND BODY
GEAR & BEARING GP

EXCAVATOR 314D LCR EXCAVATOR BYJ
 314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP4950 314D LCR BYJ   (2008)

FRAME AND BODY

GEAR & BEARING GP
GEAR & BEARING GP-SWING
191-2596 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
191-2596 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
199-4692 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
199-4692 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
229-1079 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9589 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9601 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9602 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9603 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
436-2840 GEAR & BEARING GP-SWING
 

#SEBP49500410
 

191-2596: GEAR & BEARING GP-SWING

191-2596 GEAR & BEARING GP-SWING
S/N BYJ1-UP; PDP1-UP
PART OF 260-7185, 260-7186 FRAME AR-UNDERCARRIAGE
i01659095 SEBP4950
1912596 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 314D LCR EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 4I-7511 [1] RETAINER  
2. 4I-7512 [1] CLAMP-HOSE  
3. 4I-7444 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 7X-2555 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP (LOOP)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 191-2665 [1] TUBE AS  
15. 229-1079 [1] GEAR & BEARING GP-SWING (127-BEARING)  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
15A. 148-4685 E SEAL (309-CM)  
15B. 229-1078 [1] SEAL-DUST  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 1U-8846 B SEALANT-GASKET  
19. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49500411
 

191-2596: GEAR & BEARING GP-SWING

191-2596 GEAR & BEARING GP-SWING
S/N BYJ1-372; PDP1-226
PART OF 260-7185, 260-7186 FRAME AR-UNDERCARRIAGE
i04901119 SEBP4950
1912596 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 314D LCR EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 4I-7511 [1] RETAINER  
2. 4I-7512 [1] CLAMP-HOSE  
3. 4I-7444 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 7X-2555 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP (LOOP)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 191-2665 [1] TUBE AS  
15. 378-9589 CY [1] GEAR & BEARING GP-SWING  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 1U-8846 B SEALANT-GASKET  
19. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49500412
 

199-4692: GEAR & BEARING GP-SWING

199-4692 GEAR & BEARING GP-SWING
S/N BYJ1-UP; PDP1-UP
PART OF 260-7212, 260-7213 INSTALLATION AR-BLADE
Type 1
AN ATTACHMENT
i01665596 SEBP4950
1994692 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 314D LCR EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 121-5204 [1] RETAINER  
2. 099-0913 [1] CLAMP-HOSE  
3. 121-5203 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 7X-2555 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP (LOOP)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 191-2665 [1] TUBE AS  
15. 229-1079 Y [1] GEAR & BEARING GP-SWING (127-BEARING)  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 1U-8846 B SEALANT-GASKET  
19. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49500413
 

199-4692: GEAR & BEARING GP-SWING

199-4692 GEAR & BEARING GP-SWING
S/N BYJ1-UP; PDP1-UP
PART OF 260-7212, 260-7213 INSTALLATION AR-BLADE
Type 2
AN ATTACHMENT
i04846531 SEBP4950
1994692 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 314D LCR EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 121-5204 [1] RETAINER  
2. 099-0913 [1] CLAMP-HOSE  
3. 121-5203 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 447-1708 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP (LOOP)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 191-2665 [1] TUBE AS  
15. 378-9589 CY [1] GEAR & BEARING GP-SWING (127-BEARING)  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49500414
 

229-1079: GEAR & BEARING GP-SWING

229-1079 GEAR & BEARING GP-SWING
S/N BYJ1-UP; PDP1-UP
PART OF 199-4692 GEAR & BEARING GP-SWING
AN ATTACHMENT
i04862249 SEBP4950
2291079 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 314D LCR EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 229-1078 [1] SEAL-DUST  
3. 148-4685 E SEAL (309-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP49500415
 

378-9589: GEAR & BEARING GP-SWING

378-9589 GEAR & BEARING GP-SWING
S/N BYJ1-372; PDP1-226
PART OF 191-2596, 199-4692 GEAR & BEARING GP-SWING
ALSO AN ATTACHMENT
i04862330 SEBP4950
3789589 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 314D LCR EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 229-1078 [1] SEAL-DUST  
3. 148-4685 E SEAL (309-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP49500416
 

378-9601: GEAR & BEARING GP-SWING

378-9601 GEAR & BEARING GP-SWING
S/N BYJ373-UP; PDP227-UP
PART OF 260-7185, 260-7186 FRAME AR-UNDERCARRIAGE
i05294402 SEBP4950
3789601 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 314D LCR EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 4I-7444 [1] BOOT  
2. 4I-7446 [1] GASKET  
3. 4I-7511 [1] RETAINER  
4. 227-6186 [38] SPACER (16.6X32X26-MM THK)  
5. 378-9603 Y [1] GEAR & BEARING GP-SWING  
6. 095-1299 [1] DOWEL  
7. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
8. 4I-7326 [1] STRIP  
9. 4I-7512 [1] CLAMP-HOSE  
10. 447-1708 M [34] BOLT (M16X2X80-MM)  
11. 8T-0357 M [38] BOLT (M16X2X70-MM)  
12. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49500417
 

378-9602: GEAR & BEARING GP-SWING

378-9602 GEAR & BEARING GP-SWING
S/N BYJ1-UP; PDP1-UP
PART OF 260-7212, 260-7213, 385-4081, 385-4084, 419-4381, 419-4383 INSTALLATION AR-BLADE
AN ATTACHMENT
i04886184 SEBP4950
3789602 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 314D LCR EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 4I-7446 [1] GASKET  
2. 121-5203 [1] BOOT  
3. 121-5204 [1] RETAINER  
4. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
5. 378-9603 Y [1] GEAR & BEARING GP-SWING  
6. 227-6186 [38] SPACER (16.6X32X26-MM THK)  
7. 095-1299 [1] DOWEL  
8. 099-0913 [1] CLAMP-HOSE  
9. 4I-7326 [1] STRIP  
10. 447-1708 M [34] BOLT (M16X2X80-MM)  
11. 8T-0357 M [38] BOLT (M16X2X70-MM)  
12. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49500418
 

378-9603: GEAR & BEARING GP-SWING

378-9603 GEAR & BEARING GP-SWING
S/N BYJ373-UP; PDP227-UP
PART OF 378-9601, 378-9602, 436-2840 GEAR & BEARING GP-SWING
ALSO AN ATTACHMENT
i04886235 SEBP4950
3789603 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 314D LCR EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 229-1078 [1] SEAL-DUST  
3. 148-4685 E SEAL (309-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP49500419
 

436-2840: GEAR & BEARING GP-SWING

436-2840 GEAR & BEARING GP-SWING
S/N BYJ1-UP; PDP1-UP
PART OF 433-7980, 433-7981 INSTALLATION AR-BLADE
AN ATTACHMENT
i05430582 SEBP4950
4362840 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 314D LCR EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 4I-7446 [1] GASKET  
2. 121-5203 [1] BOOT  
3. 434-6222 [1] PLATE AS  
4. 468-5307 [34] SPACER (16.6X32X5-MM THK)  
5. 378-9603 Y [1] GEAR & BEARING GP-SWING  
6. 227-6186 [38] SPACER (16.6X32X26-MM THK)  
7. 095-1299 [1] DOWEL  
8. 099-0913 [1] CLAMP-HOSE  
9. 4I-7326 [1] STRIP  
10. 461-3875 M [34] BOLT (M16X2X80-MM)  
11. 461-3874 M [38] BOLT (M16X2X70-MM)  
12. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Swing Gear - Lubricate
314D Excavator
Swing Bearing - Lubricate
314D Excavator
Specifications
Swing Gear and Bearing
314D CR Excavator Machine System Specifications
Tool Operating Manual
451-0130 Swing Gear Inner Bearing Seal Installation Tool{0374, 0599, 0700, 0745, 7063}
451-0130 Swing Gear Inner Bearing Seal Installation Tool{0374, 0599, 0700, 0745, 7063}
Testing and Adjusting
Swing Bearing Movement - Measure
314D Excavator Hydraulic System
Disassembly and Assembly
Swing Gear and Bearing - Remove and Install
314D CR Hydraulic Excavator Machine Systems
Service Magazine
Installation of the Correct Dust Seal in the Swing Gear and Bearing {7063}
2009/05/18
A New Riveting Hammer Improves the Installation of the Swing Bearing Dust Seal on Certain Excavators {7063}
2012/03/23
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 314D LCR :

FRAME GP-UPPER
273-6772 FRAME GP-UPPER
FRAME GP-UPPER
273-6772 FRAME GP-UPPER
FENDER GP
286-6067 FENDER GP
FENDER AS-SOUND SUPPRESSION
313-8136 FENDER AS-SOUND SUPPRESSION
ENCLOSURE GP-SOUND SUPPRESSION
337-4880 ENCLOSURE GP-SOUND SUPPRESSION
ENCLOSURE GP-SOUND SUPPRESSION
337-4880 ENCLOSURE GP-SOUND SUPPRESSION
ENCLOSURE GP-SOUND SUPPRESSION
337-4880 ENCLOSURE GP-SOUND SUPPRESSION
ENCLOSURE GP-SOUND SUPPRESSION
337-4880 ENCLOSURE GP-SOUND SUPPRESSION
GEAR & BEARING GP-SWING
191-2596 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
199-4692 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
199-4692 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
229-1079 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9589 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9601 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9602 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9603 GEAR & BEARING GP-SWING

Truck sale:

Caterpillar 314DLCR, Construction
53,509 
Caterpillar 314DLCR, Construction
- Crawler Excavators
WESTRAC PTY. LTD. (NSW)
Australia
Caterpillar 314DLCR, Construction
90,000 
Caterpillar 314DLCR, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC
Caterpillar 314DLCR, Construction
131,250 
Caterpillar 314DLCR, Construction
- Crawler Excavators
WHAYNE SUPPLY COMPANY
Caterpillar 314DLCR, Construction
83,000 
Caterpillar 314DLCR, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.
CATERPILLAR 314DLCR 2012
 
CATERPILLAR 314DLCR 2012
- TRACK EXCAVATORS
WHAYNE SUPPLY CO