OPERATOR STATION
MONITOR GPELECTRICAL AND STARTING SYSTEM
MOTOR GPCAMERA GP
SENSOR GP
PANEL GP-CIRCUIT BREAKER
OPERATOR STATION
CONSOLE GPOPERATOR STATION
MONITOR GP
#SEBP49510130
260-2211: MONITOR & MOUNTING GP
For full view, you need register
Parts for your 314D LCR EXCAVATOR:
CATERPILLAR SIS#SEBP49510131
316-8903: MOTOR GP-ELECTRIC
316-8903 MOTOR GP-ELECTRIC -AIR CONDITIONER CONDENSER
S/N SBP1-UP
PART OF 316-8809 CONDENSER GP-REFRIGERANT
S/N SBP1-UP
PART OF 316-8809 CONDENSER GP-REFRIGERANT
For full view, you need register
#SEBP49510132
330-1319: MOUNTING GP-CAMERA
330-1319 MOUNTING GP-CAMERA
S/N SBP1-UP
PART OF 330-8751 INSTALLATION AR
AN ATTACHMENT
S/N SBP1-UP
PART OF 330-8751 INSTALLATION AR
AN ATTACHMENT
For full view, you need register
Parts for your 314D LCR EXCAVATOR:
CATERPILLAR SIS#SEBP49510133
352-4011: MOUNTING GP-SENSOR
For full view, you need register
Parts for your 314D LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5C-9553 M | [3] | BOLT (M6X1X16-MM) | ||
| 6V-5683 M | [2] | BOLT (M6X1X16-MM) | ||
| 8T-4138 M | [4] | BOLT (M6X1X20-MM) | ||
| 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | ||
| [1] | PLATE-MOUNTING | |||
| [1] | PLATE-MOUNTING | |||
| [1] | PLATE-MOUNTING | |||
| 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | ||
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| M | METRIC PART | |||
#SEBP49510134
319-1405: PANEL GP-CIRCUIT BREAKER
319-1405 PANEL GP-CIRCUIT BREAKER
S/N SBP1-UP
PART OF 275-7106 BATTERY & WIRING GP, 306-8768 WIRING GP-HEATER
S/N SBP1-UP
PART OF 275-7106 BATTERY & WIRING GP, 306-8768 WIRING GP-HEATER
For full view, you need register
Parts for your 314D LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 7Y-5493 | [1] | TOOL (FUSE PULLER) | |
| 3. | 9G-8451 | [1] | BLOCK AS | |
| 1H-3244 | [1] | LOCKWASHER | ||
| 4B-4276 | [2] | WASHER (7X16X1.6-MM THK) | ||
| 4L-7124 | [1] | BOLT (1/4-20X1.25-IN) | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 4. | 9W-1442 | [12] | FUSE (10-AMPERE) | |
| 5. | 9W-1446 | [2] | FUSE (20-AMPERE) | |
| 6. | 094-2080 | [1] | SWITCH-MAGNETIC (24-VOLT)(START RELAY) | |
| 7. | 111-4837 | [1] | CLIP | |
| 8. | 116-0114 | [1] | SWITCH AS-MAGNETIC (24-VOLT)(HEATER RELAY) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9. | 127-4618 | [1] | FUSE (25-AMPERE) | |
| 10. | 139-5345 | [6] | FUSE (5-AMPERE) | |
| 11. | 140-0866 | [3] | RELAY (24-VOLT)(POWER RELAY) | |
| 11A. | 140-0866 | [1] | RELAY (24-VOLT)(BOOM FLOODLIGHT) | |
| 11B. | 140-0866 | [1] | RELAY (24-VOLT)(NEUTRAL START) | |
| 11C. | 140-0866 | [1] | RELAY (24-VOLT)(HORN) | |
| 11D. | 140-0866 | [1] | RELAY (24-VOLT)(CHASSIS LIGHT) | |
| 12. | 163-6758 | [1] | WIRE AS | |
| 13. | 170-9372 | [1] | COVER | |
| 14. | 170-9373 | [2] | LATCH | |
| 15. | 171-2208 | [1] | CIRCUIT BREAKER AS (60-AMPERE)(ALTERNATOR) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 16. | 197-4330 | [1] | CONTROLLER-AIR (HEATER) | |
| 17. | 319-1406 | [1] | HARNESS AS-PANEL (CIRCUIT BREAKER) | |
| 18. | 319-1407 | [1] | BRACKET AS | |
| 19. | 319-1414 | [1] | CABLE AS | |
| 6V-2369 D | CABLE (4-GA, BLACK)(0.3-M) | |||
| 9G-4343 | [1] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 20. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 21. | 6V-5645 | [2] | SCREW-MACHINE (10-32X0.87-IN) | |
| 22. | 7X-2619 M | [7] | BOLT (M6X1X10-MM) | |
| 23. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 25. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 26. | 8T-6411 M | [4] | SCREW-MACHINE (M6X1X12-MM) | |
| 27. | 9X-8256 | [15] | WASHER (6.6X12X2-MM THK) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49510135
251-0542: PANEL GP-SWITCH
251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N SBP1-UP
Type 1
CANNOT BE USED WITH @@@@@251-0544@@@@@
AN ATTACHMENT
S/N SBP1-UP
Type 1
CANNOT BE USED WITH @@@@@251-0544@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 314D LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 319-4420 CY | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 4. | 170-9324 | [1] | LAMP AS-INDICATOR (24-VOLT, 3-WATT) | |
| 5. | 185-9208 | [1] | KNOB AS (THROTTLE POSITION) | |
| 6. | 234-1156 | [1] | COVER | |
| 7. | 234-1158 | [1] | COVER | |
| 8. | 267-7976 | [1] | PANEL | |
| 9. | 328-0021 C | [1] | HARNESS AS-CONSOLE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECPTACLE AS & WEDGE) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [14] | TERMINAL (MALE) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 153-2540 | [10] | TERMINAL (FEMALE) | ||
| 153-2541 | [1] | PLUG-CONNECTOR (10-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 6V-9491 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49510136
251-0542: PANEL GP-SWITCH
251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N SBP1-UP
Type 2
CANNOT BE USED WITH @@@@@251-0544@@@@@
AN ATTACHMENT
S/N SBP1-UP
Type 2
CANNOT BE USED WITH @@@@@251-0544@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 314D LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 255-2751 CY | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 319-4420 Y | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 4. | 170-9324 | [1] | LAMP AS-INDICATOR (24-VOLT, 3-WATT) | |
| 5. | 185-9208 | [1] | KNOB AS (THROTTLE POSITION) | |
| 6. | 234-1156 | [1] | COVER | |
| 7. | 234-1158 | [1] | COVER | |
| 8. | 267-7976 | [1] | PANEL | |
| 9. | 328-0021 | [1] | HARNESS AS-CONSOLE | |
| 3S-2093 | [3] | STRAP-CABLE | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [14] | TERMINAL (MALE) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 153-2540 | [10] | TERMINAL (FEMALE) | ||
| 153-2541 | [1] | PLUG-CONNECTOR (10-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 6V-9491 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49510137
251-0542: PANEL GP-SWITCH
251-0542 PANEL GP-SWITCH -ENGINE SPEED, START
S/N SBP1-UP
Type 3
CANNOT BE USED WITH @@@@@251-0544@@@@@
AN ATTACHMENT
S/N SBP1-UP
Type 3
CANNOT BE USED WITH @@@@@251-0544@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 314D LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 170-9324 | [1] | LAMP AS-INDICATOR (24-VOLT, 3-WATT)(OPERATOR CONSOLE) | |
| 3. | 185-9208 | [1] | KNOB AS (THROTTLE POSITION) | |
| 4. | 234-1156 | [1] | COVER | |
| 5. | 234-1158 | [1] | COVER | |
| 6. | 255-2751 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 7. | 267-7976 | [1] | PANEL | |
| 8. | 319-4420 Y | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 9. | 495-9718 CY | [1] | HARNESS AS-PANEL | |
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 123-0707 M | [4] | SCREW-HEX SOCKET (M4X0.7X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49510138
251-0544: PANEL GP-SWITCH
251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N SBP1-UP
PART OF 309-5764 INSTALLATION GP-SECURITY
Type 1
AN ATTACHMENT
S/N SBP1-UP
PART OF 309-5764 INSTALLATION GP-SECURITY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 314D LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 106-0107 Y | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 4. | 185-9208 | [1] | KNOB AS | |
| 5. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 6. | 205-8257 | [1] | COIL AS (EXCITER) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 234-1156 | [1] | COVER | |
| 8. | 267-7977 | [1] | PANEL | |
| 9. | 251-0543 | [1] | HARNESS AS-CONSOLE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| [14] | PLATE | |||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 153-2540 | [10] | TERMINAL (FEMALE) | ||
| 153-2541 | [1] | PLUG-CONNECTOR (10-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 238-2366 | [7] | TERMINAL (MALE) | ||
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 6V-9491 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49510139
251-0544: PANEL GP-SWITCH
251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N SBP1-UP
PART OF 309-5764 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT
S/N SBP1-UP
PART OF 309-5764 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 314D LCR EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 319-4420 CY | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 4. | 185-9208 | [1] | KNOB AS | |
| 5. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 6. | 206-5208 | [1] | COIL AS (EXCITER) | |
| 7. | 234-1156 | [1] | COVER | |
| 8. | 267-7977 | [1] | PANEL | |
| 9. | 328-0021 C | [1] | HARNESS AS-CONSOLE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [14] | TERMINAL (MALE) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 153-2540 | [10] | TERMINAL (FEMALE) | ||
| 153-2541 | [1] | PLUG-CONNECTOR (10-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 6V-9491 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
OPERATOR STATION
MONITOR GP
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Troubleshooting
