299-2954 WIRING GP-CHASSIS -ACCUGRADE READY S/N A6F1-UP; A8F1-UP PART OF 290-1774 CONVERSION AR-MACHINE Type 2 AN ATTACHMENT 320D

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 299-2954 WIRING GP-
1. 319-1387 WIRING GP-
2. 259-5045 WIRING GP-
3. 267-8007 WIRING GP-
4. 267-8007 WIRING GP-
5. 267-8008 WIRING GP-
6. 231-1836 WIRING GP-
7. 251-0433 WIRING GP-
8. 251-0435 WIRING GP-
9. 251-0485 WIRING GP-
0. INFORMATION

EXCAVATOR 320D EXCAVATOR A6F
320D & 320D L Excavators A6F00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4954 320D A6F (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

324-5774 WIRING GP-CAMERA

299-2954 WIRING GP-CHASSIS

319-1387 WIRING GP-CHASSIS

259-5045 WIRING GP-COMBINED FLOW

267-8007 WIRING GP-COMMUNICATION

#SEBP49540280

299-2954: WIRING GP-CHASSIS

WIRING GP-CHASSIS

299-2954 WIRING GP-CHASSIS -ACCUGRADE READY
S/N A6F1-UP; A8F1-UP
PART OF 290-1774 CONVERSION AR-MACHINE
Type 2
AN ATTACHMENT

i04380629 SEBP4954

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[46]	STRAP-CABLE
2.	111-4836	[1]	CLIP
3.	177-7707	[2]	BOSS
4.	275-6841	[1]	HARNESS AS-CONTROL (BODY TILT SENSOR, GPS RECEIVER)
	8T-8737	[16]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	239-7356	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
5.	275-6842	[1]	HARNESS AS-CONTROL (DISPLAY, GPS RADIO)
	8T-8737	[6]	PLUG-SEAL
	9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	167-8987	[1]	PLUG AS-CONNECTOR (8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
6.	279-7609	[1]	BRACKET AS
7.	364-0229 C	[1]	HARNESS AS-CONTROL (BLADE)
	3R-9965	[1]	PLUG AS-CONNECTOR (8-PIN)
	3S-2093	[1]	STRAP-CABLE
	6D-5257	[1]	PLUG AS-CONNECTOR (8-PIN)
	8L-8413	[3]	STRAP-CABLE (WHITE)
	8T-8737	[18]	PLUG-SEAL
	104-6871	[2]	CAP-DUST
	9W-0844	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM)
	9X-3402	[32]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-2540	[2]	RESISTOR AS-CONNECTION (3-PIN)
	9X-3401	[21]	PIN-CONNECTOR (16-GA TO 18-GA)
	174-0503	[2]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	243-5362	[1]	CAP-DUST
	253-2695	[1]	PLUG AS-CONNECTOR
	272-5000	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
8.	132-5789	[2]	CLIP
9.	2S-1647	[1]	GROMMET
10.	4P-7428	[1]	CLIP
11.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
13.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
14.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49540281

319-1387: WIRING GP-CHASSIS

WIRING GP-CHASSIS

319-1387 WIRING GP-CHASSIS -CAB, REAR
S/N A6F536-1013; A8F783-1340
PART OF 264-8638, 264-8639 CHASSIS AR

i02940524 SEBP4954

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7K-1181	[5]	STRAP-CABLE
3.	319-1348	[1]	HARNESS AS-CONTROL (ENGINE START, PUMP CONTROL)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	104-6573	[1]	PLUG-CONNECTOR
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	8T-8737	[6]	PLUG-SEAL
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[3]	STRAP-CABLE
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	7Y-3951	[3]	TERMINAL-BLADE (14-GA)
	7Y-3993	[1]	TERMINAL-BLADE (12-GA)
	125-7875 D		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	D		ORDER BY THE METER

#SEBP49540282

259-5045: WIRING GP-COMBINED FLOW

WIRING GP-COMBINED FLOW

259-5045 WIRING GP-COMBINED FLOW
S/N A6F1-UP; A8F1-UP
PART OF 259-7493, 259-7495 CONTROL AR-AUXILIARY
AN ATTACHMENT

i02790201 SEBP4954

2595045 WIRING GP-COMBINED FLOW Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[23]	STRAP-CABLE
2.	7K-1181	[11]	STRAP-CABLE
3.	111-4836	[2]	CLIP
4.	116-0118	[1]	CLIP
5.	204-1611	[4]	STRAP (DUAL)
6.	267-7636	[1]	HARNESS AS-AUXILIARY
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	8T-8737	[9]	PLUG-SEAL
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	8T-8730	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
	2L-8079	[3]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
7.	132-5789	[1]	CLIP
8.	156-6175	[1]	CLIP (LADDER)
9.	4P-7581	[1]	CLIP (LADDER)
10.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
12.	8T-4171 M	[1]	BOLT (M6X1X12-MM)
13.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
14.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
15.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49540283

267-8007: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

267-8007 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N A6F1-UP; A8F1-UP
PART OF 264-8665, 298-4115 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT

i02789464 SEBP4954

2678007 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[3]	STRAP-CABLE
4.	9X-3495	[1]	CLIP AS
6.	116-0118	[3]	CLIP
7.	259-4887	[1]	HARNESS AS-WIRING (PRODUCT LINK)
8.	259-4940	[1]	HARNESS AS-WIRING (SERVICE CONNECTOR)
9.	275-6979	[1]	HARNESS AS-CONTROL (PRODUCT LINK 121SR)
10.	111-4837	[1]	CLIP
11.	132-5789	[2]	CLIP
12.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4136 CM	[2]	BOLT (M10X1.5X25-MM)
14.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
16.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
17.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP49540284

267-8007: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

267-8007 WIRING GP-COMMUNICATION -PRODUCT LINK 321SR
S/N A6F1-UP; A8F1-UP
PART OF 298-4115 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT

i05662562 SEBP4954

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-7889	[1]	SPACER (11X25X45-MM THK)
2.	111-4837	[1]	CLIP
3.	116-0118 C	[1]	CLIP
4.	440-4822 C	[1]	HARNESS AS-CONTROL
	126-1774	[1]	COVER-CONNECTOR
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	8T-8737	[62]	PLUG-SEAL
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	9X-3402	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[20]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[3]	STRAP-CABLE
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
5.	132-5789	[2]	CLIP
6.	7K-1181	[3]	STRAP-CABLE
7.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4136 CM	[1]	BOLT (M10X1.5X25-MM)
9.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
10.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
11.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49540285

267-8008: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

267-8008 WIRING GP-COMMUNICATION -PRODUCT LINK 121SR
S/N A6F1-UP; A8F1-UP
PART OF 264-8666 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i02789409 SEBP4954

2678008 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[3]	STRAP-CABLE
4.	9X-3495	[1]	CLIP AS
	8C-3334	[2]	RIVET-TUBULAR
5.	091-9035	[1]	SPACER (11X25X20-MM THK)
6.	116-0118	[2]	CLIP
7.	259-4940	[1]	HARNESS AS-WIRING (SERVICE CONNECTOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[6]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	243-4508		RECEPTACLE AS-CONNECTOR (6-PIN)
8.	275-6979	[1]	HARNESS AS-CONTROL (PRODUCT LINK 121SR)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
9.	132-5789	[1]	CLIP
10.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
12.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
	M		METRIC PART

#SEBP49540286

231-1836: WIRING GP-CONSOLE

WIRING GP-CONSOLE

231-1836 WIRING GP-CONSOLE -LH
S/N A6F1-UP; A8F1-UP
PART OF 274-7465 CONSOLE GP-OPERATOR, 251-0433 WIRING GP-CONSOLE
ALSO AN ATTACHMENT

i02490120 SEBP4954

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	7K-1181	[1]	STRAP-CABLE
3.	163-6795	[2]	STRAP-CABLE
4.	251-0580	[1]	HARNESS AS-CONSOLE
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[9]	STRAP-CABLE
	5P-5995 D		TUBE (0.3-M)
	7Y-3963	[2]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[2]	TUBE (RECEPTACLE TERMINAL)
	8T-8737	[9]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[11]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER

#SEBP49540287

251-0433: WIRING GP-CONSOLE

WIRING GP-CONSOLE

251-0433 WIRING GP-CONSOLE
S/N A6F1-UP; A8F1-UP
PART OF 393-9426, 419-4748 CAB GP, 273-5387, 327-6568 OPERATOR AR
ALSO AN ATTACHMENT

i02490116 SEBP4954

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
231-1836 Y	[1]	WIRING GP-CONSOLE (LH)
251-0435 Y	[1]	WIRING GP-CONSOLE (RH)
Y		SEPARATE ILLUSTRATION

#SEBP49540288

251-0435: WIRING GP-CONSOLE

WIRING GP-CONSOLE

251-0435 WIRING GP-CONSOLE -RH
S/N A6F1-UP; A8F1-UP
PART OF 274-7466 CONSOLE GP-OPERATOR, 251-0433 WIRING GP-CONSOLE
ALSO AN ATTACHMENT

i02490155 SEBP4954

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	283-3074	[1]	SWITCH AS-TOGGLE (AUTO/MANUAL ENG SPEED CONTROL)
4.	163-6711	[1]	SWITCH AS-TOGGLE (MANUAL ENGINE SPEED CONTROL)
5.	163-6795	[2]	STRAP-CABLE
6.	251-0602	[1]	BRACKET
7.	259-4877	[1]	HARNESS AS-CONSOLE
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[10]	STRAP-CABLE
	7Y-3967	[2]	TERMINAL AS
			(EACH INCLUDES)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[1]	TUBE (RECEPTACLE TERMINAL)
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[14]	TERMINAL (FEMALE)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
8.	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
9.	8C-5063 E		CONDUIT-FLEXIBLE (15.49-MM ID, SPLIT)(10-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49540289

251-0485: WIRING GP-CONVERTER

WIRING GP-CONVERTER

251-0485 WIRING GP-CONVERTER -12-VOLT, 7-AMPERE
S/N A6F1-UP; A8F1-UP
PART OF 342-1374, 342-1375, 345-2291, 358-0080 OPTION AR-CAB
AN ATTACHMENT

i02507051 SEBP4954

2510485 WIRING GP-CONVERTER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	121-0987	[2]	SOCKET-AUXILIARY POWER (12-VOLT, 7-AMPERE)
2.	283-2783	[2]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
3.	251-0483	[2]	BRACKET
4.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
5.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
6.	8T-4171 M	[8]	BOLT (M6X1X12-MM)
7.	9X-8256	[8]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
320D Excavator

Battery or Battery Cable - Inspect/Replace
320D Excavator

Battery - Recycle
320D Excavator

Power Receptacle - If Equipped
320D Excavator

Fuses - Replace
320D Excavator

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}

Installation Procedure for 259-5045 Combined Flow Wiring Gp {1408}
Installation Procedure for 259-5045 Combined Flow Wiring Gp {1408}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Installation Procedure for 275-7203 Auxiliary Control Wiring Gp {1408}
Installation Procedure for 275-7203 Auxiliary Control Wiring Gp {1408}

Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Technical Information Bulletin

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Specifications

Wiring (Battery)
320D and 323D Excavators Machine System Specifications

Wiring (Battery) - Cold Weather
320D and 323D Excavators Machine System Specifications

Wiring (Refueling Pump)
320D and 323D Excavators Machine System Specifications

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C4.2 and C6.4 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
320D and 323D Excavators Hydraulic System

Electrical Connector - Inspect
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Open Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Wiring Harness (Short Circuit) - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Connector Contact Description
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connectors
C4.2 and C6.4 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C4.2 and C6.4 Engines for Caterpillar Built Machines

CAN Data Link - Test
AccuGrade^® GPS / Single UTS / Site and Laser Reference v11 for Excavators

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18

Troubleshooting Procedure for the Engine Oil Pressure Switch {1403, 1408}
2007/08/06

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/08/10