AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

294-8011 CYLINDER GP-COUPLER S/N A6F1-UP; A8F1-UP 88.9-MM (3.5-IN) BORE X 165.1-MM (6.5-IN) STROKE PART OF 292-4151 COUPLER GP-QUICK AN ATTACHMENT 320D


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 320D EXCAVATOR A6F
 320D & 320D L Excavators A6F00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4954 320D A6F   (2007)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BUCKET
289-7948 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
172-8402 CYLINDER GP-COUPLER
CYLINDER GP-COUPLER
294-8011 CYLINDER GP-COUPLER
 

#SEBP49540500
 

294-8011: CYLINDER GP-COUPLER

294-8011 CYLINDER GP-COUPLER
S/N A6F1-UP; A8F1-UP
88.9-MM (3.5-IN) BORE X 165.1-MM (6.5-IN) STROKE
PART OF 292-4151 COUPLER GP-QUICK
AN ATTACHMENT
i04821832 SEBP4954
2948011 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
3. 339-3730 J [1] VALVE-COUNTERBALANCE  
4. [1] BEARING  
5. [2] BUSHING  
6. [1] PISTON  
7. 346-5594 [1] HEAD  
8. 346-5595 [1] ROD AS  
9. 346-5596 [1] TUBE AS  
10. 3F-7147 [12] BOLT (1/2-13X1.5-IN)  
11. 4B-9808 [3] SETSCREW (1/4-20X0.5-IN)  
12. 9S-8002 [4] PLUG (7/16-20-THD)  
13. 9S-8004 [1] PLUG (9/16-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  346-0643 [1] KIT-SEAL (COUPLER CYLINDER)  
    (KIT INCLUDES WIPER, DOUBLE LIP SEAL, WEAR-RING, O-RING, BACK-UP RING, PISTON RING SET, & C1 PISTON RING)
  161-1980 J [1] KIT-SERVICE (COUNTERBALANCE VALVE)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP49540501
 

148-4644: DRIVE GP-SWING

148-4644 DRIVE GP-SWING -WITHOUT MOTOR
S/N A6F1-UP; A8F1-UP
PART OF 148-4679 DRIVE GP-SWING
i01375366 SEBP4954
1484644 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
2. 094-1509 [3] SHAFT-PLANETARY  
3. 148-4733 [3] GEAR-PLANETARY (26-TEETH)  
4. 114-1581 [1] SPACER (57.5X74X6-MM THK)  
5. 148-4732 [1] GEAR-SUN (20-TEETH)  
6. 093-1729 [2] RING-RETAINING  
7. 148-4632 [1] GEAR-SUN (23-TEETH)  
8. 191-2578 [1] CARRIER-PLANETARY  
9. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
10. 148-4637 [1] CARRIER-PLANETARY  
11. 148-4640 [1] RING-RETAINING  
12. 148-4643 [1] BEARING  
13. 095-1022 [1] BEARING-ROLLER  
14. 148-4642 [1] SEAL-O-RING  
15. 227-6228 [1] CAGE  
16. 453-3447 M [6] BOLT (M12X1.75X40-MM)  
17. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 199-4561 [2] SEAL-LIP TYPE  
19. 148-4636 [1] SHAFT-PINION  
20. 148-4638 [1] HOUSING  
21. 3K-0360 [1] SEAL-O-RING  
22. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
23. 148-4634 [3] SHAFT-PLANETARY  
24. 095-0891 [3] PIN-SPRING  
25. 148-4635 [1] GEAR-RING (73-TEETH)  
26. 148-4633 [3] GEAR-PLANETARY (25-TEETH)  
27. 7Y-0252 [6] BEARING AS-ROLLER  
28. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
29. 095-0886 [3] PIN-SPRING  
30. 094-1516 [3] BEARING-ROLLER  
31. 171-9383 [1] SPACER  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP49540502
 

148-4679: DRIVE GP-SWING

148-4679 DRIVE GP-SWING -WITH MOTOR
S/N A6F1-UP; A8F1-UP
PART OF 267-6767 POWER TRAIN AR
i02776400 SEBP4954
1484679 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
2. 114-1399 [1] PIPE-GAUGE  
3. 148-4644 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
4. 158-8985 Y [1] MOTOR & MTG GP-SWING  
5. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
6. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP49540503
 

227-6166: FASTENER GP-SWING & FINAL DR

227-6166 FASTENER GP-SWING & FINAL DR
S/N A6F1-UP; A8F1-UP
PART OF 267-6767 POWER TRAIN AR
i02776476 SEBP4954
2276166 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5503 [2] CORK  
2. 5D-1026 [1] CLAMP-BAND  
3. 096-4755 [1] PIN  
4. 461-3878 M [32] BOLT (M20X2.5X160-MM)  
5. 461-3882 M [12] BOLT (M24X3X70-MM)  
6. 8T-3282 [32] WASHER-HARD (22X35X3.5-MM THK)  
7. 6V-8237 [12] WASHER (26X44X4-MM THK)  
8. 5P-0767 E HOSE (90-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP49540504
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N A6F1-UP; A8F1-UP
PART OF 239-1711 TANK & FILTER GP-HYDRAULIC
i01356767 SEBP4954
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
 

#SEBP49540505
 

247-7459: FILTER AR-HYDRAULIC

247-7459 FILTER AR-HYDRAULIC
S/N A6F1-UP; A8F1-UP
AN ATTACHMENT
i02790865 SEBP4954
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  239-1726 Y [1] LINES GP-RETURN & FILTER (HAMMER)  
  259-5046 Y [1] WIRING GP-HYDRAULIC CONTROL (RETURN FILTER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49540506
 

188-4140: FILTER GP-OIL

188-4140 FILTER GP-OIL -HYDRAULIC RETURN
S/N A6F1-2354; A8F1-3464
PART OF 239-1711 TANK & FILTER GP-HYDRAULIC
i02496815 SEBP4954
1884140 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-3503 Y [1] BLOCK GP-HYDRAULIC  
2. 129-8034 [1] VALVE AS-BYPASS  
3. 123-2003 [2] SEAL-O-RING  
4. 173-3507 [1] HOUSING AS  
5. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 188-4142 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
10. 159-7784 [1] SEAL-O-RING  
11. 6V-4298 M [4] BOLT (M5X0.8X16-MM)  
12. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49540507
 

188-4140: FILTER GP-OIL

188-4140 FILTER GP-OIL -HYDRAULIC RETURN
S/N A6F2355-UP; A8F3465-UP
PART OF 239-1711 TANK & FILTER GP-HYDRAULIC
i05537184 SEBP4954
1884140 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-3503 Y [1] BLOCK GP-HYDRAULIC  
2. 129-8034 [1] VALVE AS-BYPASS  
3. 123-2003 [2] SEAL-O-RING  
4. 173-3507 [1] HOUSING AS  
5. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 419-8528 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
10. 159-7784 [1] SEAL-O-RING  
12. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49540508
 

188-4142: FILTER GP-OIL

188-4142 FILTER GP-OIL -HYDRAULIC RETURN
S/N A6F1-2354; A8F1-3464
PART OF 188-4140 FILTER GP-OIL
i02178159 SEBP4954
1884142 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-2762 [1] PLATE  
2. 173-3529 JM [6] BOLT (M6X1X15-MM)  
3. 3T-7528 J [6] SEAL-O-RING  
4. 173-3513 [1] BASE  
5. 3E-4297 J [2] SEAL-O-RING  
6. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
7. 188-4143 [1] FILM-INSTRUCTION (HYDRAULIC OIL RETURN FILTER)  
8. 179-9806 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)(HYDRAULIC RETURN)  
9. 137-3623 J [4] SEAL-O-RING  
10. 6V-7658 J [2] SEAL-O-RING  
11. 177-2553 J [1] SEAL-O-RING  
12. 095-1681 J [1] SEAL-O-RING  
13. 173-3515 [1] RING-RETAINING  
14. 173-3516 [1] HANDLE  
15. 4J-7533 J [1] SEAL-O-RING  
16. 9S-4180 J [1] PLUG  
17. 137-3624 JM [8] SCREW (M3X0.5X5-MM)  
18. 137-3625 J [2] PAD  
19. 173-3517 [1] PLATE  
20. 137-3628 J [1] SHIM (0.1-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  201-9299 J [1] KIT-SERVICE (HYDRAULIC RETURN FILTER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP49540509
 

224-1687: FILTER GP-OIL

224-1687 FILTER GP-OIL -HYDRAULIC
S/N A6F1-UP; A8F1-UP
PART OF 239-1726 LINES GP-RETURN & FILTER
AN ATTACHMENT
i02790945 SEBP4954
2241687 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 224-1685 [1] SWITCH AS (HYDRAULIC FILTER BYPASS)  
2. 096-6073 [1] PLUG  
3. 095-1582 [1] SEAL-O-RING  
4. 216-6678 [1] CASE  
5. 216-6676 [1] FILTER ELEMENT AS-OIL (HYDRAULIC)  
6. 216-6677 [1] HEAD AS  
7. 095-1717 [1] SEAL-O-RING  
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
The Bucket Cylinder May Cause Abnormal Noise on 320D and 323D Excavators{5457}
The Bucket Cylinder May Cause Abnormal Noise on 320D and 323D Excavators{5457}
Specifications
Boom Cylinder Lines - Right Hand
320D and 323D Excavators Machine System Specifications
Boom Cylinder Lines - Left Hand
320D and 323D Excavators Machine System Specifications
Bucket Cylinder
320D and 323D Excavators Machine System Specifications
Boom Cylinder
320D and 323D Excavators Machine System Specifications
Bucket Cylinder
320D and 323D Excavators Machine System Specifications
Boom Lines
320D and 323D Excavators Machine System Specifications
Stick Cylinder
320D and 323D Excavators Machine System Specifications
Boom Cylinder
320D and 323D Excavators Machine System Specifications
Bucket Cylinder
320D and 323D Excavators Machine System Specifications
Boom Lines
320D and 323D Excavators Machine System Specifications
Boom Lines - Coupler Lines for Reach Boom
320D and 323D Excavators Machine System Specifications
Boom Cylinder Lines
320D and 323D Excavators Machine System Specifications
Boom Cylinder Lines
320D and 323D Excavators Machine System Specifications
Stick Cylinder
320D and 323D Excavators Machine System Specifications
Stick Cylinder
320D and 323D Excavators Machine System Specifications
Bucket Cylinder
320D and 323D Excavators Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
320D and 323D Excavators Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Speed - Check
320D and 323D Excavators Hydraulic System
Cylinder Drift - Check - Loaded Bucket
320D and 323D Excavators Hydraulic System
Cylinder Drift - Check - Empty Bucket
320D and 323D Excavators Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Stick Cylinder - Remove and Install
320D Excavator Machine Systems
Bucket Cylinder - Remove and Install
320D Excavator Machine Systems
Boom Cylinder - Remove and Install
320D Excavator Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2010/10/12
Hydraulic Cylinder Piston Assembly for Certain 320D/320E to 329D/329E Excavators {5456, 5457, 5458}
2014/03/27
New Implement Cylinder Rod Seals are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458}
2015/06/19
New Bucket Cylinder Groups are Now Used on Certain Excavators {5457}
2014/12/09
Upgrading to Heavy Duty Cylinders and Seal Rings on Certain 320D and 320E Hydraulic Excavators {5458}
Upgrading to Heavy Duty Cylinders and Seal Rings on Certain 320D and 320E Hydraulic Excavators {5458}

Caterpillar Parts SIS Catalog 320D :

CYLINDER GP-COUPLER
172-8402 CYLINDER GP-COUPLER
CYLINDER GP-BUCKET
289-7948 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
289-7925 CYLINDER GP-BOOM
CYLINDER & SEAL GP-STICK
349-4132 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
349-4130 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
349-4128 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
341-2802 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
242-6751 CYLINDER & SEAL GP-STICK
DRIVE GP-SWING
148-4644 DRIVE GP-SWING
DRIVE GP-SWING
148-4679 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
227-6166 FASTENER GP-SWING & FINAL DR
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
247-7459 FILTER AR-HYDRAULIC
FILTER GP-OIL
188-4140 FILTER GP-OIL
FILTER GP-OIL
188-4140 FILTER GP-OIL
FILTER GP-OIL
188-4142 FILTER GP-OIL

Truck sale:

Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
Caterpillar 320D2
 
Caterpillar 320D2
- Crawler Excavators
PESA
Caterpillar 320D2, Construction
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
Caterpillar 320D2, Construction
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
CATERPILLAR 320D2 2014
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.