AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

341-2802 CYLINDER & SEAL GP-STICK S/N A9F1-UP 140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE FIELD REPLACEMENT FOR @@@@@349-4128@@@@@ FIELD INSTALLATION 320D L


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 320D L EXCAVATOR A9F
 320D L Excavator A9F00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4955 320D L A9F   (2007)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP-STICK
242-6744 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
242-6751 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
341-2802 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
349-4128 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
349-4130 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
349-4132 CYLINDER & SEAL GP-STICK
 

#SEBP49550410
 

341-2802: CYLINDER & SEAL GP-STICK

341-2802 CYLINDER & SEAL GP-STICK
S/N A9F1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE
FIELD REPLACEMENT FOR @@@@@349-4128@@@@@
FIELD INSTALLATION
i05261184 SEBP4955
3412802 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-1098 [1] CYLINDER AS-STICK  
1A. 357-5711 [2] BUSHING  
2. 352-1104 [1] ROD AS  
2A. 240-2914 [2] BUSHING  
3. 188-4181 [1] HEAD  
4. 095-1721 J [1] SEAL-O-RING  
5. 4I-3627 J [1] RING-BACKUP  
6. 096-5625 [1] BUSHING  
7. 094-1931 [1] RING-RETAINING  
8. 350-0955 J [1] SEAL-BUFFER  
9. 350-0960 J [1] SEAL-U-CUP  
10. 121-1372 J [1] RING-BACKUP  
11. 133-6904 J [1] SEAL-LIP TYPE  
12. 126-1876 J [1] RING-SEAL  
13. 378-1556 [1] STOP  
14. 247-8873 [1] PISTON  
15. 096-1571 J [2] RING  
16. 247-8874 J [2] RING  
17. 096-1570 J [1] SEAL AS  
18. 4I-3631 J [2] RING-BACKUP  
19. 4B-9880 [1] BALL  
20. 096-6210 M [1] SETSCREW-SOCKET (M14X2X14-MM)  
21. 085-8605 [1] RING-RETAINING  
22. 194-8359 J [1] RING-SEAL  
23. 085-8604 [2] RING-RETAINING  
24. 121-1549 [1] STOP  
25. 4I-3628 M [12] BOLT-SOCKET HEAD (M18X2.5X80-MM)  
26. 166-1494 [4] SEAL-LIP TYPE  
27. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  350-0970 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP49550411
 

349-4128: CYLINDER & SEAL GP-STICK

349-4128 CYLINDER & SEAL GP-STICK
S/N A9F1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.25-IN) STROKE
PART OF 349-4127 CYLINDER & LINES GP-STICK
FIELD REPLACEMENT ORDER @@@@@341-2802@@@@@
AN ATTACHMENT
i04239290 SEBP4955
3494128 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6904 J [1] SEAL-LIP TYPE  
2. 121-1372 J [1] RING-BACKUP  
3. 350-0960 J [1] SEAL-U-CUP  
4. 350-0955 J [1] SEAL-BUFFER  
5. 096-5625 [1] BUSHING  
6. 094-1931 [1] RING-RETAINING  
7. 188-4181 [1] HEAD  
8. 4I-3628 M [12] BOLT-SOCKET HEAD (M18X2.5X80-MM)  
9. 095-1721 J [1] SEAL-O-RING  
10. 4I-3627 J [1] RING-BACKUP  
11. 247-8876 [1] CYLINDER AS  
11A. 241-7381 [1] BUSHING  
12. 247-8877 [1] ROD AS  
12A. 241-7381 [1] BUSHING  
13. 4I-8869 [1] STOP  
14. 126-1876 J [1] RING-SEAL  
15. 4I-3631 J [2] RING-BACKUP  
16. 096-1570 J [1] SEAL AS  
17. 247-8874 J [2] RING  
18. 096-1571 J [2] RING  
19. 247-8873 [1] PISTON  
20. 096-6210 M [1] SETSCREW-SOCKET (M14X2X14-MM)  
21. 4B-9880 [1] BALL  
22. 085-8605 [1] RING-RETAINING  
23. 194-8359 J [1] RING-SEAL  
24. 121-1549 [1] STOP  
25. 085-8604 [2] RING-RETAINING  
26. 166-1494 [4] SEAL-LIP TYPE  
27. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  350-0970 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP49550412
 

349-4130: CYLINDER & SEAL GP-STICK

349-4130 CYLINDER & SEAL GP-STICK
S/N A9F1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE
PART OF 349-4129 CYLINDER & LINES GP-STICK
AN ATTACHMENT
i04314558 SEBP4955
3494130 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6904 J [1] SEAL-LIP TYPE  
2. 121-1372 J [1] RING-BACKUP  
3. 350-0960 J [1] SEAL-U-CUP  
4. 350-0955 J [1] SEAL-BUFFER  
5. 096-5625 [1] BUSHING  
6. 094-1931 [1] RING-RETAINING  
7. 188-4181 [1] HEAD  
8. 4I-3628 M [12] BOLT-SOCKET HEAD (M18X2.5X80-MM)  
9. 095-1721 J [1] SEAL-O-RING  
10. 4I-3627 J [1] RING-BACKUP  
11. 247-8876 [1] CYLINDER AS  
11A. 241-7381 [1] BUSHING  
12. 247-8877 [1] ROD AS  
12A. 241-7381 [1] BUSHING  
13. 4I-8869 [1] STOP  
14. 214-4501 J [1] RING-SEAL  
15. 4I-3631 J [2] RING-BACKUP  
16. 096-1570 J [1] SEAL AS  
17. 247-8874 J [2] RING  
18. 096-1571 J [2] RING  
19. 247-8873 [1] PISTON  
20. 096-6210 M [1] SETSCREW-SOCKET (M14X2X14-MM)  
21. 4B-9880 [1] BALL  
22. 085-8605 [1] RING-RETAINING  
23. 194-8359 J [1] RING-SEAL  
24. 121-1549 [1] STOP  
25. 085-8604 [2] RING-RETAINING  
26. 166-1494 [4] SEAL-LIP TYPE  
27. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  350-0971 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP49550413
 

349-4132: CYLINDER & SEAL GP-STICK

349-4132 CYLINDER & SEAL GP-STICK
S/N A9F1-UP
140-MM (5.5-IN) BORE X 1518-MM (59.8-IN) STROKE
PART OF 349-4131 CYLINDER & LINES GP-STICK
AN ATTACHMENT
i04314814 SEBP4955
3494132 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6904 J [1] SEAL-LIP TYPE  
2. 121-1372 J [1] RING-BACKUP  
3. 350-0960 J [1] SEAL-U-CUP  
4. 350-0955 J [1] SEAL-BUFFER  
5. 096-5625 [1] BUSHING  
6. 094-1931 [1] RING-RETAINING  
7. 188-4181 [1] HEAD  
8. 4I-3628 M [12] BOLT-SOCKET HEAD (M18X2.5X80-MM)  
9. 095-1721 J [1] SEAL-O-RING  
10. 4I-3627 J [1] RING-BACKUP  
11. 247-8881 [1] CYLINDER AS  
11A. 241-7381 [1] BUSHING  
12. 247-8882 [1] ROD AS  
12A. 241-7381 [1] BUSHING  
13. 4I-8869 [1] STOP  
14. 126-1876 J [1] RING-SEAL  
15. 4I-3631 J [2] RING-BACKUP  
16. 096-1570 J [1] SEAL AS  
17. 247-8874 J [2] RING  
18. 096-1571 J [2] RING  
19. 247-8873 [1] PISTON  
20. 096-6210 M [1] SETSCREW-SOCKET (M14X2X14-MM)  
21. 4B-9880 [1] BALL  
22. 085-8605 [1] RING-RETAINING  
23. 194-8359 J [1] RING-SEAL  
24. 121-1549 [1] STOP  
25. 085-8604 [2] RING-RETAINING  
26. 166-1494 [4] SEAL-LIP TYPE  
27. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  350-0970 J [1] KIT-SEAL (STICK)  
  J   KIT MARKED J SERVICES PARTS(S) MARKED J
  M   METRIC PART
 

#SEBP49550414
 

172-8402: CYLINDER GP-COUPLER

172-8402 CYLINDER GP-COUPLER
S/N A9F1-UP
PART OF 235-0723 COUPLER GP-QUICK
AN ATTACHMENT
i01412148 SEBP4955
1728402 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8406 [1] VALVE GP-CHECK  
  2U-5338 [1] SEAL-O-RING  
  107-7640 [1] SEAL-O-RING (12.1MM ID)  
  9W-3340 [1] SEAL-O-RING (10.1MM ID)  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  172-8487 [1] KIT-SEAL  
 

#SEBP49550415
 

191-5537: DRIVE GP-AUXILIARY PUMP

191-5537 DRIVE GP-AUXILIARY PUMP
S/N A9F1-UP
PART OF 290-1912 DRIVE GP-PUMP
AN ATTACHMENT
i01400972 SEBP4955
1915537 DRIVE GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-7402 M [8] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
2. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
3. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
4. 191-5601 [2] BEARING  
5. 096-0121 [1] SEAL-O-RING  
6. 191-5541 [1] COVER  
7. 8T-5049 [1] SEAL-O-RING  
8. 177-2585 [1] COVER  
9. 173-3436 [1] COVER  
10. 095-1680 [1] SEAL-O-RING  
11. 9S-4191 [1] PLUG (9/16-18-THD)  
12. 3J-1907 [1] SEAL-O-RING  
13. Z [1] BODY  
14. 099-2096 [2] BALL BEARING  
15. 173-3406 [1] SHAFT  
16. 191-5540 [1] GEAR (39-TEETH)  
17. 191-5539 [1] SHAFT  
18. 129-7857 [1] GASKET  
19. 094-1875 [2] DOWEL  
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP49550416
 

290-1912: DRIVE GP-PUMP

290-1912 DRIVE GP-PUMP
S/N A9F1-UP
FOR USE WITH AUXILIARY PUMP
AN ATTACHMENT
i03355720 SEBP4955
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  191-5537 Y [1] DRIVE GP-AUXILIARY PUMP  
  298-2995 Y [1] SHEET AS-SOUND SUPPRESSION  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49550417
 

148-4644: DRIVE GP-SWING

148-4644 DRIVE GP-SWING -WITHOUT MOTOR
S/N A9F1-UP
PART OF 148-4679 DRIVE GP-SWING
i01375366 SEBP4955
1484644 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
2. 094-1509 [3] SHAFT-PLANETARY  
3. 148-4733 [3] GEAR-PLANETARY (26-TEETH)  
4. 114-1581 [1] SPACER (57.5X74X6-MM THK)  
5. 148-4732 [1] GEAR-SUN (20-TEETH)  
6. 093-1729 [2] RING-RETAINING  
7. 148-4632 [1] GEAR-SUN (23-TEETH)  
8. 191-2578 [1] CARRIER-PLANETARY  
9. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
10. 148-4637 [1] CARRIER-PLANETARY  
11. 148-4640 [1] RING-RETAINING  
12. 148-4643 [1] BEARING  
13. 095-1022 [1] BEARING-ROLLER  
14. 148-4642 [1] SEAL-O-RING  
15. 227-6228 [1] CAGE  
16. 453-3447 M [6] BOLT (M12X1.75X40-MM)  
17. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 199-4561 [2] SEAL-LIP TYPE  
19. 148-4636 [1] SHAFT-PINION  
20. 148-4638 [1] HOUSING  
21. 3K-0360 [1] SEAL-O-RING  
22. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
23. 148-4634 [3] SHAFT-PLANETARY  
24. 095-0891 [3] PIN-SPRING  
25. 148-4635 [1] GEAR-RING (73-TEETH)  
26. 148-4633 [3] GEAR-PLANETARY (25-TEETH)  
27. 7Y-0252 [6] BEARING AS-ROLLER  
28. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
29. 095-0886 [3] PIN-SPRING  
30. 094-1516 [3] BEARING-ROLLER  
31. 171-9383 [1] SPACER  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP49550418
 

148-4679: DRIVE GP-SWING

148-4679 DRIVE GP-SWING -WITH MOTOR
S/N A9F1-UP
PART OF 267-6767 POWER TRAIN AR
i02776400 SEBP4955
1484679 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
2. 114-1399 [1] PIPE-GAUGE  
3. 148-4644 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
4. 158-8985 Y [1] MOTOR & MTG GP-SWING  
5. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
6. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP49550419
 

227-6166: FASTENER GP-SWING & FINAL DR

227-6166 FASTENER GP-SWING & FINAL DR
S/N A9F1-UP
PART OF 267-6767 POWER TRAIN AR
i02776476 SEBP4955
2276166 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5503 [2] CORK  
2. 5D-1026 [1] CLAMP-BAND  
3. 096-4755 [1] PIN  
4. 461-3878 M [32] BOLT (M20X2.5X160-MM)  
5. 461-3882 M [12] BOLT (M24X3X70-MM)  
6. 8T-3282 [32] WASHER-HARD (22X35X3.5-MM THK)  
7. 6V-8237 [12] WASHER (26X44X4-MM THK)  
8. 5P-0767 E HOSE (90-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
The Bucket Cylinder May Cause Abnormal Noise on 320D and 323D Excavators{5457}
The Bucket Cylinder May Cause Abnormal Noise on 320D and 323D Excavators{5457}
Specifications
Boom Cylinder Lines - Right Hand
320D and 323D Excavators Machine System Specifications
Boom Cylinder Lines - Left Hand
320D and 323D Excavators Machine System Specifications
Bucket Cylinder
320D and 323D Excavators Machine System Specifications
Boom Cylinder
320D and 323D Excavators Machine System Specifications
Bucket Cylinder
320D and 323D Excavators Machine System Specifications
Boom Lines
320D and 323D Excavators Machine System Specifications
Stick Cylinder
320D and 323D Excavators Machine System Specifications
Bucket Cylinder
320D and 323D Excavators Machine System Specifications
Boom Lines
320D and 323D Excavators Machine System Specifications
Boom Lines - Coupler Lines for Reach Boom
320D and 323D Excavators Machine System Specifications
Boom Cylinder Lines
320D and 323D Excavators Machine System Specifications
Boom Cylinder Lines
320D and 323D Excavators Machine System Specifications
Stick Cylinder
320D and 323D Excavators Machine System Specifications
Stick Cylinder
320D and 323D Excavators Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
320D and 323D Excavators Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Speed - Check
320D and 323D Excavators Hydraulic System
Cylinder Drift - Check - Loaded Bucket
320D and 323D Excavators Hydraulic System
Cylinder Drift - Check - Empty Bucket
320D and 323D Excavators Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Stick Cylinder - Remove and Install
320D Excavator Machine Systems
Bucket Cylinder - Remove and Install
320D Excavator Machine Systems
Boom Cylinder - Remove and Install
320D Excavator Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Hydraulic Cylinder Piston Assembly for Certain 320D/320E to 329D/329E Excavators {5456, 5457, 5458}
Hydraulic Cylinder Piston Assembly for Certain 320D/320E to 329D/329E Excavators {5456, 5457, 5458}
New Bucket Cylinder Groups are Now Used on Certain Excavators {5457}
2014/12/09
Upgrading to Heavy Duty Cylinders and Seal Rings on Certain 320D and 320E Hydraulic Excavators {5458}
Upgrading to Heavy Duty Cylinders and Seal Rings on Certain 320D and 320E Hydraulic Excavators {5458}

Caterpillar Parts SIS Catalog 320D L :

CYLINDER & SEAL GP-STICK
242-6751 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
242-6744 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
242-6734 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-BUCKET
349-4152 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
349-4134 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
341-2814 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
341-2182 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
242-6756 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-STICK
349-4128 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
349-4130 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
349-4132 CYLINDER & SEAL GP-STICK
CYLINDER GP-COUPLER
172-8402 CYLINDER GP-COUPLER
DRIVE GP-AUXILIARY PUMP
191-5537 DRIVE GP-AUXILIARY PUMP
290-1912 DRIVE GP-PUMP
DRIVE GP-SWING
148-4644 DRIVE GP-SWING
DRIVE GP-SWING
148-4679 DRIVE GP-SWING

Truck sale:

 
 
Caterpillar 320D L
- Crawler excavators
WHEELER MACHINERY CO.
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
29.801 
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
CAVPOWER
Caterpillar 320DL
 
Caterpillar 320DL
- Crawler excavators
WAGNER EQUIPMENT CO
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
77.723 
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
TOROMONT CAT
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
92.000 
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.