HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC SYSTEM
CYLINDER GP#SEBP49560360
203-9192: CYLINDER & LINES GP-FELLING HD
203-9192 CYLINDER & LINES GP-FELLING HD
S/N BWW1-UP
PART OF 247-5020 HEAD AR-FELLING
AN ATTACHMENT
S/N BWW1-UP
PART OF 247-5020 HEAD AR-FELLING
AN ATTACHMENT
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 179-4823 | [4] | PIN | |
| 2. | 179-4825 | [2] | PIN | |
| 3. | 190-0858 Y | [2] | CYLINDER GP-HYDRAULIC (GRAPPLE ARM) | |
| 4. | 205-1819 | [2] | PIN | |
| 5. | 205-1822 Y | [1] | LINES GP-FELLING HEAD CYLINDER | |
| 6. | 096-4885 M | [8] | LOCKNUT (M16X2-THD) | |
| 7. | 8T-4174 M | [8] | BOLT (M16X2X120-MM) | |
| 8. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| 9. | 190-0858 Y | [2] | CYLINDER GP-HYDRAULIC (ACCUMULATOR ARM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49560361
242-6743: CYLINDER & LINES GP-STICK
242-6743 CYLINDER & LINES GP-STICK
S/N BWW1-147
PART OF 302-8105 BOOM AR
AN ATTACHMENT
S/N BWW1-147
PART OF 302-8105 BOOM AR
AN ATTACHMENT
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS#SEBP49560362
242-6750: CYLINDER & LINES GP-STICK
242-6750 CYLINDER & LINES GP-STICK
S/N BWW1-144
PART OF 304-8826 BOOM AR
AN ATTACHMENT
S/N BWW1-144
PART OF 304-8826 BOOM AR
AN ATTACHMENT
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS#SEBP49560363
341-2806: CYLINDER & LINES GP-STICK
341-2806 CYLINDER & LINES GP-STICK
S/N BWW333-UP
PART OF 302-8105, 324-3536 BOOM AR
AN ATTACHMENT
S/N BWW333-UP
PART OF 302-8105, 324-3536 BOOM AR
AN ATTACHMENT
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS#SEBP49560364
341-2808: CYLINDER & LINES GP-STICK
341-2808 CYLINDER & LINES GP-STICK
S/N BWW1-UP
PART OF 304-8826 BOOM AR
AN ATTACHMENT
S/N BWW1-UP
PART OF 304-8826 BOOM AR
AN ATTACHMENT
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS#SEBP49560365
349-4129: CYLINDER & LINES GP-STICK
349-4129 CYLINDER & LINES GP-STICK
S/N BWW1-335
PART OF 302-8105, 324-3536 BOOM AR
AN ATTACHMENT
S/N BWW1-335
PART OF 302-8105, 324-3536 BOOM AR
AN ATTACHMENT
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS#SEBP49560366
349-4131: CYLINDER & LINES GP-STICK
349-4131 CYLINDER & LINES GP-STICK
S/N BWW145-UP
PART OF 304-8826 BOOM AR
AN ATTACHMENT
S/N BWW145-UP
PART OF 304-8826 BOOM AR
AN ATTACHMENT
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS#SEBP49560367
205-1968: CYLINDER & LINES GP-TILT
205-1968 CYLINDER & LINES GP-TILT
S/N BWW1-UP
PART OF 205-1786 TILT AR-FELLING HEAD
AN ATTACHMENT
S/N BWW1-UP
PART OF 205-1786 TILT AR-FELLING HEAD
AN ATTACHMENT
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 183-9208 | [1] | PIN | |
| 2. | 183-9209 | [1] | PIN | |
| 3. | 190-2455 Y | [1] | CYLINDER GP-TILT | |
| 4. | 205-1815 Y | [1] | LINES GP-TILT CYLINDER (PARTIAL) | |
| 5. | 223-2450 | [1] | COVER | |
| 6. | 7Y-1537 M | [2] | LOCKNUT (M20X2.5-THD) | |
| 7. | 8C-8478 M | [2] | BOLT (M20X2.5X140-MM) | |
| 8. | 8T-4123 | [2] | WASHER (3.62X5.75X0.375-MM THK) | |
| 9. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 10. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49560368
372-3844: CYLINDER & MTG GP-BAIL
372-3844 CYLINDER & MTG GP-BAIL
S/N BWW1-UP
PART OF 375-1033 HEAD AR-HARVESTER
AN ATTACHMENT
S/N BWW1-UP
PART OF 375-1033 HEAD AR-HARVESTER
AN ATTACHMENT
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 365-4962 | [2] | PIN | |
| 3. | 365-4963 | [2] | PIN | |
| 4. | 372-3825 | [8] | SPACER | |
| 5. | 372-3845 | [1] | ARM AS-BAIL | |
| 6. | 372-3847 | [2] | SPACER | |
| 7. | 372-8277 Y | [2] | CYLINDER GP-BAIL | |
| 8. | 095-0941 | [2] | RING-RETAINING | |
| 9. | 3B-4510 | [2] | LOCKWASHER | |
| 10. | 7T-8862 | [2] | BEARING-ALIGNING | |
| 11. | 8T-4193 M | [2] | BOLT (M16X2X50-MM) | |
| 12. | 8T-4778 M | [4] | LOCKNUT (M16X2-THD) | |
| 13. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 14. | 8T-0375 M | [2] | BOLT (M16X2X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49560369
365-4935: CYLINDER & MTG GP-DELIMB KNIFE
365-4935 CYLINDER & MTG GP-DELIMB KNIFE -UPPER
S/N BWW1-UP
PART OF 375-1033 HEAD AR-HARVESTER
AN ATTACHMENT
S/N BWW1-UP
PART OF 375-1033 HEAD AR-HARVESTER
AN ATTACHMENT
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5W-8322 M | [2] | NUT (M30X1.5-THD) | |
| 2. | 362-0297 Y | [2] | CYLINDER GP-HYDRAULIC | |
| 3. | 362-0308 | [1] | KNIFE AS (RH) | |
| 3A. | 362-0327 | [2] | BUSHING | |
| 362-0307 | [1] | PLATE (CUTTING EDGE) | ||
| 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | ||
| 4. | 362-0310 | [1] | KNIFE AS (LH) | |
| 4A. | 362-0327 | [2] | BUSHING | |
| 362-0309 | [1] | PLATE (CUTTING EDGE) | ||
| 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | ||
| 5. | 362-0314 | [4] | BUSHING | |
| 6. | 362-0316 | [2] | PIN AS | |
| 7. | 362-0318 | [2] | PIN | |
| 8. | 362-0319 | [2] | SPACER | |
| 9. | 9X-8258 | [2] | WASHER (33X56X6-MM THK) | |
| 10. | 372-3792 | [2] | PIN AS | |
| 11. | 3B-4640 | [2] | PIN-COTTER | |
| 12. | 6V-7688 M | [2] | LOCKNUT (M20X2.5-THD) | |
| 13. | 8T-4123 | [2] | WASHER (3.62X5.75X0.375-MM THK) | |
| 14. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 15. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Specifications
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Systems Operation
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Caterpillar Parts SIS Catalog 320D FM :
Truck sale:
105,018
55,000


