AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

190-2455 CYLINDER GP-TILT S/N BWW1-UP PART OF 205-1968 CYLINDER & LINES GP-TILT AN ATTACHMENT 320D FM


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 320D FM EXCAVATOR BWW
 320D FM Forest Swing Machine BWW00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP4956 320D FM BWW   (2008)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-HYDRAULIC
190-0858 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
362-0297 CYLINDER GP-HYDRAULIC
CYLINDER GP-TILT
190-2455 CYLINDER GP-TILT
LINES GP-TILT CYLINDER
205-1815 LINES GP-TILT CYLINDER
STOP GP-CYLINDER
365-5023 STOP GP-CYLINDER
GUARD GP-CYLINDER
200-5663 GUARD GP-CYLINDER
 

#SEBP49560390
 

190-2455: CYLINDER GP-TILT

190-2455 CYLINDER GP-TILT
S/N BWW1-UP
PART OF 205-1968 CYLINDER & LINES GP-TILT
AN ATTACHMENT
i02939489 SEBP4956
1902455 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 7J-1309 [2] BEARING  
3. 155-1170 [9] LOCKWASHER  
4. 196-2421 [1] ROD AS  
5. 196-2422 [1] HEAD  
6. 196-2423 [1] PISTON  
7. 196-2425 [9] BOLT (5/8-11X1.75-IN)  
8. 196-2426 [1] KIT-SEAL  
    (INCLUDES RING-WEAR, SEALS & O-RINGS)
9. 2F-5325 [1] SETSCREW (3/8-16-THD)  
 

#SEBP49560391
 

204-2751: DRIVE GP-AUXILIARY PUMP

204-2751 DRIVE GP-AUXILIARY PUMP
S/N BWW1-UP
PART OF 306-6730 LINES GP-HYDRAULIC
AN ATTACHMENT
i03042689 SEBP4956
2042751 DRIVE GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-7857 [1] GASKET  
2. 191-5539 [1] SHAFT  
3. 191-5540 [1] GEAR (39-TEETH)  
4. 191-5541 [1] COVER  
5. 191-5601 [2] BEARING  
6. 204-2753 [1] SHAFT  
7. 031-4392 [1] SEAL-O-RING  
8. 094-1875 [2] DOWEL  
9. 095-1680 [1] SEAL-O-RING  
10. 096-0121 [1] SEAL-O-RING  
11. 099-2096 [2] BALL BEARING  
12. 101-7402 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
13. 3J-1907 [1] SEAL-O-RING  
14. 8T-0273 M [4] BOLT-SOCKET HEAD (M12X1.75X40-MM)  
15. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
16. 8T-4779 M [2] BOLT (M16X2X35-MM)  
17. 9S-4191 [1] PLUG (9/16-18-THD)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  M   METRIC PART
 

#SEBP49560392
 

148-4644: DRIVE GP-SWING

148-4644 DRIVE GP-SWING -WITHOUT MOTOR
S/N BWW1-UP
PART OF 148-4679 DRIVE GP-SWING
i01375366 SEBP4956
1484644 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
2. 094-1509 [3] SHAFT-PLANETARY  
3. 148-4733 [3] GEAR-PLANETARY (26-TEETH)  
4. 114-1581 [1] SPACER (57.5X74X6-MM THK)  
5. 148-4732 [1] GEAR-SUN (20-TEETH)  
6. 093-1729 [2] RING-RETAINING  
7. 148-4632 [1] GEAR-SUN (23-TEETH)  
8. 191-2578 [1] CARRIER-PLANETARY  
9. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
10. 148-4637 [1] CARRIER-PLANETARY  
11. 148-4640 [1] RING-RETAINING  
12. 148-4643 [1] BEARING  
13. 095-1022 [1] BEARING-ROLLER  
14. 148-4642 [1] SEAL-O-RING  
15. 227-6228 [1] CAGE  
16. 453-3447 M [6] BOLT (M12X1.75X40-MM)  
17. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 199-4561 [2] SEAL-LIP TYPE  
19. 148-4636 [1] SHAFT-PINION  
20. 148-4638 [1] HOUSING  
21. 3K-0360 [1] SEAL-O-RING  
22. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
23. 148-4634 [3] SHAFT-PLANETARY  
24. 095-0891 [3] PIN-SPRING  
25. 148-4635 [1] GEAR-RING (73-TEETH)  
26. 148-4633 [3] GEAR-PLANETARY (25-TEETH)  
27. 7Y-0252 [6] BEARING AS-ROLLER  
28. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
29. 095-0886 [3] PIN-SPRING  
30. 094-1516 [3] BEARING-ROLLER  
31. 171-9383 [1] SPACER  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP49560393
 

148-4679: DRIVE GP-SWING

148-4679 DRIVE GP-SWING -WITH MOTOR
S/N BWW1-UP
PART OF 267-6872 POWER TRAIN AR
i02776400 SEBP4956
1484679 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
2. 114-1399 [1] PIPE-GAUGE  
3. 148-4644 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
4. 158-8985 Y [1] MOTOR & MTG GP-SWING  
5. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
6. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP49560394
 

267-6880: FASTENER GP-SWING DRIVE & MTR

267-6880 FASTENER GP-SWING DRIVE & MTR
S/N BWW1-UP
PART OF 267-6872 POWER TRAIN AR
i03046661 SEBP4956
2676880 FASTENER GP-SWING DRIVE & MTR Parts scheme
  For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5503 [2] CORK  
2. 5D-1026 [1] CLAMP-BAND  
3. 096-4755 [1] PIN  
4. 287-3585 M [40] BOLT (M20X2.5X60-MM)  
5. 201-7949 M [12] BOLT (M24X3X70-MM)  
6. 8T-3282 [40] WASHER-HARD (22X35X3.5-MM THK)  
7. 6V-8237 [12] WASHER (26X44X4-MM THK)  
8. 5P-0767 E HOSE (90-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP49560395
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N BWW1-UP
PART OF 239-1711 TANK & FILTER GP-HYDRAULIC
i01356767 SEBP4956
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
 

#SEBP49560396
 

188-4140: FILTER GP-OIL

188-4140 FILTER GP-OIL -HYDRAULIC RETURN
S/N BWW1-239
PART OF 239-1711 TANK & FILTER GP-HYDRAULIC
i02496815 SEBP4956
1884140 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-3503 Y [1] BLOCK GP-HYDRAULIC  
2. 129-8034 [1] VALVE AS-BYPASS  
3. 123-2003 [2] SEAL-O-RING  
4. 173-3507 [1] HOUSING AS  
5. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 188-4142 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
10. 159-7784 [1] SEAL-O-RING  
11. 6V-4298 M [4] BOLT (M5X0.8X16-MM)  
12. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49560397
 

188-4140: FILTER GP-OIL

188-4140 FILTER GP-OIL -HYDRAULIC RETURN
S/N BWW240-UP
PART OF 239-1711 TANK & FILTER GP-HYDRAULIC
i05537184 SEBP4956
1884140 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-3503 Y [1] BLOCK GP-HYDRAULIC  
2. 129-8034 [1] VALVE AS-BYPASS  
3. 123-2003 [2] SEAL-O-RING  
4. 173-3507 [1] HOUSING AS  
5. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 419-8528 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
10. 159-7784 [1] SEAL-O-RING  
12. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49560398
 

188-4142: FILTER GP-OIL

188-4142 FILTER GP-OIL -HYDRAULIC RETURN
S/N BWW1-239
PART OF 188-4140 FILTER GP-OIL
i02178159 SEBP4956
1884142 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-2762 [1] PLATE  
2. 173-3529 JM [6] BOLT (M6X1X15-MM)  
3. 3T-7528 J [6] SEAL-O-RING  
4. 173-3513 [1] BASE  
5. 3E-4297 J [2] SEAL-O-RING  
6. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
7. 188-4143 [1] FILM-INSTRUCTION (HYDRAULIC OIL RETURN FILTER)  
8. 179-9806 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)(HYDRAULIC RETURN)  
9. 137-3623 J [4] SEAL-O-RING  
10. 6V-7658 J [2] SEAL-O-RING  
11. 177-2553 J [1] SEAL-O-RING  
12. 095-1681 J [1] SEAL-O-RING  
13. 173-3515 [1] RING-RETAINING  
14. 173-3516 [1] HANDLE  
15. 4J-7533 J [1] SEAL-O-RING  
16. 9S-4180 J [1] PLUG  
17. 137-3624 JM [8] SCREW (M3X0.5X5-MM)  
18. 137-3625 J [2] PAD  
19. 173-3517 [1] PLATE  
20. 137-3628 J [1] SHIM (0.1-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  201-9299 J [1] KIT-SERVICE (HYDRAULIC RETURN FILTER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP49560399
 

289-8194: FILTER GP-OIL

289-8194 FILTER GP-OIL -HYDRAULIC, CASE DRAIN
S/N BWW1-UP
PART OF 286-6863, 456-0619 LINES GP-FRONT, 239-1711 TANK & FILTER GP-HYDRAULIC
ALSO AN ATTACHMENT
i02718378 SEBP4956
2898194 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D FM EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-7521 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, CASE DRAIN)  
2. 289-8195 [1] HEAD AS-FILTER  
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Specifications
Boom Cylinder
320D Forest Machine Machine System Specifications
Boom Cylinder Lines
320D Forest Machine Machine System Specifications
Bucket Cylinder
320D Forest Machine Machine System Specifications
Stick Cylinder
320D Forest Machine Machine System Specifications
Boom Lines
320D Forest Machine Machine System Specifications
Boom Cylinder Lines - Left Hand
320D Forest Machine Machine System Specifications
Boom Cylinder Lines - Right Hand
320D Forest Machine Machine System Specifications
Boom Lines
320D Forest Machine Machine System Specifications
Boom Lines
320D Forest Machine Machine System Specifications
Boom Lines
320D Forest Machine Machine System Specifications
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
320D Forest Machine Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
320D Forest Machine Hydraulic System
Cylinder Speed - Check
320D Forest Machine Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Boom Cylinder - Remove and Install
320D FM Excavator Machine Systems
Cab Tilt Cylinder - Remove and Install
320D FM Excavator Machine Systems
Heel Cylinder - Remove and Install
320D FM Excavator Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
New Implement Cylinder Rod Seals are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458}
2015/06/19

Caterpillar Parts SIS Catalog 320D FM :

CYLINDER GP-HYDRAULIC
362-0297 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
190-0858 CYLINDER GP-HYDRAULIC
CYLINDER GP-CAB TILT
263-2914 CYLINDER GP-CAB TILT
CYLINDER GP-BOOM
289-7925 CYLINDER GP-BOOM
CYLINDER GP-BAIL
372-8277 CYLINDER GP-BAIL
CYLINDER & SEAL GP-STICK
349-4132 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
349-4130 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
341-2809 CYLINDER & SEAL GP-STICK
DRIVE GP-AUXILIARY PUMP
204-2751 DRIVE GP-AUXILIARY PUMP
DRIVE GP-SWING
148-4644 DRIVE GP-SWING
DRIVE GP-SWING
148-4679 DRIVE GP-SWING
FASTENER GP-SWING DRIVE & MTR
267-6880 FASTENER GP-SWING DRIVE & MTR
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
FILTER GP-OIL
188-4140 FILTER GP-OIL
FILTER GP-OIL
188-4140 FILTER GP-OIL
FILTER GP-OIL
188-4142 FILTER GP-OIL

Truck sale:

 
 
Caterpillar 320D FM
- Knuckleboom loaders
WESTERN STATES EQUIPMENT
Caterpillar 320D FM, Forestry Excavators, Forestry equipment
105,018 
Caterpillar 320D FM, Forestry Excavators, Forestry equipment
- Forestry Excavators
FINNING CANADA
Caterpillar 320DFMST, Crawler Excavators, Construction
55,000 
Caterpillar 320DFMST, Crawler Excavators, Construction
- Crawler Excavators
FINNING CHILE S.A.
Caterpillar 320DFMLL, Feller Bunchers, Forestry equipment
47,999 
Caterpillar 320DFMLL, Feller Bunchers, Forestry equipment
- Feller Bunchers
TERRA CAT
Caterpillar 320D FM, Crawler Excavators, Construction
103,228 
Caterpillar 320D FM, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.