ELECTRICAL AND STARTING SYSTEM
WIRING GPPOWER TRAIN
DRIVE GP-FINALPOWER TRAIN AR
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP49580410
291-7757: WIRING GP-PLATFORM
291-7757 WIRING GP-PLATFORM -SYSTEM 14, SYSTEM 17
S/N NEG1-UP
PART OF 285-1786 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT
S/N NEG1-UP
PART OF 285-1786 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [18] | STRAP-CABLE | |
| 2. | 7I-2673 | [3] | STRAP-CABLE | |
| 3. | 7K-1181 C | [26] | STRAP-CABLE | |
| 4. | 091-9035 | [2] | SPACER (11X25X20-MM THK) | |
| 5. | 111-4836 | [4] | CLIP | |
| 6. | 204-1611 | [2] | STRAP (DUAL) | |
| 7. | 204-1882 | [1] | BRACKET AS | |
| 8. | 319-1166 | [1] | HARNESS AS-VALVE (ONE PUMP/TWO PUMP) | |
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8T-8737 | [23] | PLUG-SEAL | ||
| 125-7874 BE | TUBE-HEAT SHRINK (5.72-MM DIA) | |||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [2] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 9. | 132-5789 C | [3] | CLIP (LADDER) | |
| 10. | 4P-7428 | [2] | CLIP (LADDER) | |
| 11. | 4P-7581 C | [7] | CLIP (LADDER) | |
| 12. | 8T-4121 C | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 15. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 16. | 8T-4185 CM | [2] | BOLT (M10X1.5X50-MM) | |
| 17. | 6G-2263 C | [2] | SPACER (10.5X19X28.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49580411
291-7768: WIRING GP-PLATFORM
For full view, you need register
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 4. | 7K-1181 | [12] | STRAP-CABLE | |
| 5. | 111-4837 | [4] | CLIP | |
| 6. | 111-4838 | [2] | CLIP | |
| 7. | 111-4839 | [2] | STRAP | |
| 8. | 116-0118 | [11] | CLIP | |
| 9. | 234-1122 | [1] | COVER | |
| 10. | 251-0299 | [1] | HARNESS AS-SWITCH (SECONDARY SHUTDOWN) | |
| 2L-8074 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 11. | 467-7447 | [1] | HARNESS AS-PLATFORM | |
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [13] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [29] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [22] | STRAP-CABLE | ||
| 9X-0196 | [1] | TERMINAL AS (16-GA) | ||
| 8T-8737 | [28] | PLUG-SEAL | ||
| 102-7964 | [1] | PLUG-CONNECTOR (16-PIN) | ||
| 102-7965 | [17] | TERMINAL (FEMALE) | ||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [43] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 116-0255 | [1] | TERMINAL-BLADE (10-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 121-1039 | [1] | TERMINAL (MALE) | ||
| 121-1168 | [2] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [34] | TERMINAL (MALE) | ||
| 125-4766 | [1] | PLUG-CONNECTOR (17-PIN) | ||
| 125-4841 | [1] | WEDGE-PLUG LOCK (21-PIN) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(35-CM) | |||
| 9X-3402 | [55] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [55] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8050 | [2] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 | [2] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 2L-8069 | [5] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 134-3296 | [1] | HOUSING-PLUG | ||
| 134-3297 | [2] | SEAL | ||
| 9X-3401 | [25] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [25] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 153-2620 | [1] | PLUG AS-CONNECTOR (54-PIN, BLACK) | ||
| 163-6759 | [1] | SEAL | ||
| 155-2270 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 197-4385 | [3] | DIODE | ||
| 230-4009 | [3] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [3] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 230-5010 | [3] | PLUG AS-CONNECTOR (6-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 238-2363 | [10] | TERMINAL (FEMALE) | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
| 243-4507 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 243-4508 | [4] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 243-4509 | [4] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 243-4510 | [2] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 342-2972 | [1] | CAP-CONNECTOR (2-PIN) | ||
| 342-2974 | [3] | CAP-CONNECTOR (6-PIN) | ||
| 12. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 13. | 4D-1836 | [1] | SWITCH-TOGGLE (SECONDARY SHUTDOWN) | |
| 14. | 7X-2621 M | [6] | BOLT (M10X1.5X12-MM) | |
| 15. | 8T-0337 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 16. | 8T-4121 | [13] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49580412
299-2604: WIRING GP-QUICK COUPLER
299-2604 WIRING GP-QUICK COUPLER
S/N NEG1-UP
PART OF 302-9403 CONTROL AR-COUPLER
AN ATTACHMENT
S/N NEG1-UP
PART OF 302-9403 CONTROL AR-COUPLER
AN ATTACHMENT
For full view, you need register
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS#SEBP49580413
238-1570: WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
S/N NEG1-UP
PART OF 220-2520 PUMP AR-REFUELING
Type 1
AN ATTACHMENT
S/N NEG1-UP
PART OF 220-2520 PUMP AR-REFUELING
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [16] | STRAP-CABLE | |
| 2. | 9X-3495 | [1] | CLIP AS | |
| 3. | 149-5050 | [1] | RELAY (24-VOLT)(REFUELING PUMP, STOP) | |
| 3A. | 149-5050 | [1] | RELAY (24-VOLT)(REFUELING PUMP, START) | |
| 4. | 213-0772 | [1] | SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY) | |
| 5. | 238-1579 | [1] | HARNESS AS-PUMP (REFUELING) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 116-0126 | [1] | HOUSING-PLUG | ||
| 116-0128 | [2] | SEAL | ||
| 116-0255 | [2] | TERMINAL-BLADE (10-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 121-1038 | [1] | HOUSING-RECEPTACLE | ||
| 121-1039 | [2] | TERMINAL (MALE) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8067 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 149-5051 | [2] | CONNECTOR-RECEPTACLE | ||
| 149-5069 | [4] | TERMINAL-BLADE (14-GA TO 20-GA) | ||
| 149-5070 | [4] | TERMINAL-BLADE (16-GA TO 20-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 197-4385 | [1] | DIODE | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 6. | 238-1593 | [1] | WIRE AS | |
| 7. | 238-1594 Y | [1] | SWITCH GP-PUSH BUTTON (REFUELING PUMP, START) | |
| 8. | 238-1596 Y | [1] | SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP) | |
| 9. | 096-2591 M | [2] | SCREW-MACHINE (M5X0.8X35-MM) | |
| 10. | 7X-2619 M | [2] | BOLT (M6X1X10-MM) | |
| 11. | 8T-0328 | [3] | WASHER-HARD (5.5X10X1-MM THK) | |
| 12. | 8T-4199 M | [1] | BOLT (M8X1.25X12-MM) | |
| 13. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 15. | 275-6993 | [1] | COVER | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49580414
238-1570: WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
S/N NEG1-UP
PART OF 220-2520 PUMP AR-REFUELING
Type 2
AN ATTACHMENT
S/N NEG1-UP
PART OF 220-2520 PUMP AR-REFUELING
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [16] | STRAP-CABLE | |
| 2. | 9X-3495 | [1] | CLIP AS | |
| 3. | 149-5050 | [1] | RELAY (24-VOLT)(REFUELING PUMP, STOP) | |
| 3A. | 149-5050 | [1] | RELAY (24-VOLT)(REFUELING PUMP, START) | |
| 4. | 213-0772 | [1] | SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY) | |
| 5. | 238-1579 | [1] | HARNESS AS-PUMP (REFUELING) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 116-0126 | [1] | HOUSING-PLUG | ||
| 116-0128 | [2] | SEAL | ||
| 116-0255 | [2] | TERMINAL-BLADE (10-GA TO 20-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 121-1038 | [1] | HOUSING-RECEPTACLE | ||
| 121-1039 | [2] | TERMINAL (MALE) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8067 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 149-5051 | [2] | CONNECTOR-RECEPTACLE | ||
| 149-5069 | [4] | TERMINAL-BLADE (14-GA TO 20-GA) | ||
| 149-5070 | [4] | TERMINAL-BLADE (16-GA TO 20-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 197-4385 | [1] | DIODE | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 6. | 319-1335 C | [1] | HARNESS AS-WIRING | |
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 7. | 238-1594 Y | [1] | SWITCH GP-PUSH BUTTON (REFUELING PUMP, START) | |
| 8. | 238-1596 Y | [1] | SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP) | |
| 9. | 096-2591 M | [2] | SCREW-MACHINE (M5X0.8X35-MM) | |
| 10. | 7X-2619 M | [2] | BOLT (M6X1X10-MM) | |
| 11. | 8T-0328 C | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 12. | 8T-4199 M | [1] | BOLT (M8X1.25X12-MM) | |
| 13. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 15. | 275-6993 | [1] | COVER | |
| 16. | 7K-1181 C | [11] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49580415
230-0961: WIRING GP-UNIT INJECTOR
230-0961 WIRING GP-UNIT INJECTOR
S/N TXF1-UP; MHX4500-UP
PART OF 267-0009, 317-9990, 356-2433 ENGINE AR-CORE
ALSO AN ATTACHMENT
S/N TXF1-UP; MHX4500-UP
PART OF 267-0009, 317-9990, 356-2433 ENGINE AR-CORE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-6508 | [6] | CAP AS | |
| 2. | 418-7614 Y | [1] | HARNESS AS-WIRING (UNIT INJECTOR) | |
| 3. | 6V-8837 M | [5] | BOLT (M6X1X16-MM) | |
| 4. | 6V-8836 M | [2] | BOLT (M6X1X14-MM) | |
| 5. | 9X-8267 | [2] | WASHER (6.6X12X2-MM THK) | |
| 6. | 237-9960 | [5] | CLIP (LADDER) | |
| 7. | 3S-2093 | [5] | STRAP-CABLE | |
| 8. | 5P-0537 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49580416
227-6044: DRIVE GP-FINAL
227-6044 DRIVE GP-FINAL -WITH MOTOR
S/N NEG1-UP
PART OF 353-0500 DRIVE GP-FINAL, 227-6042 POWER TRAIN AR
S/N NEG1-UP
PART OF 353-0500 DRIVE GP-FINAL, 227-6042 POWER TRAIN AR
For full view, you need register
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS#SEBP49580417
227-6045: DRIVE GP-FINAL
For full view, you need register
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2R-0524 | [2] | CONE-BEARING | |
| 2. | 2R-0525 | [2] | CUP-BEARING | |
| 3. | 4I-7576 | [14] | WASHER (66.3X104X3-MM THK) | |
| 4. | 7M-8485 | [2] | SEAL-O-RING | |
| 5. | 7Y-0661 | [3] | SHAFT-PLANETARY | |
| 6. | 7Y-0662 | [4] | SHAFT-PLANETARY | |
| 7. | 199-4583 | [11] | BEARING AS | |
| 8. | 7Y-0808 B | [1] | SHIM (1.6-MM THK) | |
| 9. | 7Y-1469 | [1] | COUPLING | |
| 10. | 7Y-1470 | [1] | GEAR-SUN (21-TEETH) | |
| 11. | 7Y-1472 B | [1] | SHIM (0.15-MM THK) | |
| 12. | 7Y-1473 B | [1] | SHIM (0.3-MM THK) | |
| 13. | 7Y-1474 B | [1] | SHIM (0.4-MM THK) | |
| 14. | 7Y-1475 B | [1] | SHIM (0.5-MM THK) | |
| 15. | 7Y-1476 B | [1] | SHIM (0.6-MM THK) | |
| 16. | 7Y-1477 B | [1] | SHIM (0.7-MM THK) | |
| 17. | 7Y-1478 B | [1] | SHIM (0.8-MM THK) | |
| 18. | 7Y-1479 B | [1] | SHIM (1-MM THK) | |
| 19. | 7Y-1480 B | [1] | SHIM (1.6-MM THK) | |
| 20. | 7Y-1482 | [1] | CARRIER-PLANETARY | |
| 21. | 7Y-1483 | [1] | GEAR-RING (63-TEETH) | |
| 22. | 7Y-1485 | [1] | CARRIER-PLANETARY | |
| 23. | 7Y-1487 | [1] | GEAR-RING (85-TEETH) | |
| 24. | 7Y-1488 | [1] | CARRIER AS | |
| 25. | 7Y-1491 | [1] | GEAR-SUN (21-TEETH) | |
| 26. | 7Y-1493 | [1] | SPACER (8.7X50X14-MM THK) | |
| 27. | 7Y-1495 | [3] | GEAR-PLANETARY (29-TEETH) | |
| 28. | 7Y-1498 | [1] | COVER | |
| 29. | 7Y-1499 | [3] | GEAR-PLANETARY (20-TEETH) | |
| 30. | 7Y-1504 | [4] | GEAR-PLANETARY (20-TEETH) | |
| 31. | 7Y-5235 M | [20] | BOLT (M24X3X190-MM) | |
| 32. | 110-7217 | [2] | RING-RETAINING | |
| 33. | 114-1541 | [6] | PIN-DOWEL | |
| 34. | 169-5559 | [1] | GEAR-SUN (26-TEETH) | |
| 35. | 199-4719 | [1] | GEAR-COUPLING | |
| 36. | 200-3489 | [1] | HOUSING-MOTOR | |
| 37. | 200-3490 | [1] | HOUSING-GEAR | |
| 38. | 205-9025 | [1] | SEAL GP-DUO-CONE | |
| 205-9024 | [2] | RING-TORIC | ||
| 39. | 227-6048 | [12] | WASHER (26X40X4-MM THK) | |
| 40. | 094-0584 | [6] | WASHER (40.3X72X1-MM THK) | |
| 41. | 199-4582 | [3] | BEARING AS | |
| 42. | 095-0891 | [7] | PIN-SPRING | |
| 43. | 096-3216 M | [2] | SETSCREW-SOCKET (M12X1.75X12-MM) | |
| 44. | 3E-2338 | [2] | PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL) | |
| 45. | 6V-8133 M | [12] | BOLT (M24X3X80-MM) | |
| 46. | 7Y-1484 | [1] | SPACER (191X221X8.5-MM THK) | |
| 47. | 7Y-1492 | [2] | SPACER (67X101.1X10-MM THK) | |
| 48. | 8C-5240 | [1] | SEAL-O-RING | |
| 49. | 8T-3957 M | [10] | BOLT-SOCKET HEAD (M12X1.75X30-MM) | |
| 50. | 8T-4167 | [20] | WASHER-HARD (26X44X4-MM THK) | |
| 51. | 8T-4240 | [3] | RING-RETAINING | |
| 52. | 1U-8846 B | SEALANT-GASKET | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP49580418
353-0500: DRIVE GP-FINAL
353-0500 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N NEG1-UP
PART OF 227-6042 POWER TRAIN AR
S/N NEG1-UP
PART OF 227-6042 POWER TRAIN AR
For full view, you need register
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS#SEBP49580419
227-6042: POWER TRAIN AR
For full view, you need register
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 296-6252 Y | [1] | DRIVE GP-SWING (WITH MOTOR, LH) | ||
| 296-6249 Y | [1] | DRIVE GP-SWING (WITH MOTOR, RH) | ||
| 227-6050 Y | [1] | FASTENER GP-SWING & FINAL DR | ||
| 227-6044 Y | [2] | DRIVE GP-FINAL (WITH MOTOR) | ||
| -OR- | ||||
| 353-0500 Y | [2] | DRIVE GP-FINAL (WITH MOTOR, SPROCKET) | ||
| 115-6399 Y | [2] | SPROCKET GP (NON-SEGMENTED) | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Caterpillar Parts SIS Catalog 345D :
Truck sale:
Caterpillar 345D, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
