AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

103-9527 CONDENSER GP-REFRIGERANT -WITH FANS S/N JHB1-UP; LAY1-UP PART OF 237-1000 CONDENSER & MTG GP-REFRIGERANT Type 2 AN ATTACHMENT D6T


OPERATOR STATION
AIR CONDITIONER GP
CONTROL GP-JOYSTICK
PEDAL GP
CONTROL GP-HANDLE

TRACK-TYPE TRACTOR D6T TRACK-TYPE TRACTOR JHB
 D6T TRACK-TYPE TRACTOR Std, XL Differential Steering JHB00001-UP (MACHINE) POWERED BY C9 Engine SEBP4960 D6T JHB   (2007)

OPERATOR STATION

AIR CONDITIONER GP
CONDENSER & MTG GP-REFRIGERANT
237-1000 CONDENSER & MTG GP-REFRIGERANT
CONDENSER GP-REFRIGERANT
103-9527 CONDENSER GP-REFRIGERANT
CONDENSER GP-REFRIGERANT
103-9527 CONDENSER GP-REFRIGERANT
LINES GP-AIR CONDITIONER
223-1677 LINES GP-AIR CONDITIONER
LINES GP-AIR CONDITIONER
223-1677 LINES GP-AIR CONDITIONER
LINES GP-AIR CONDITIONER
223-1677 LINES GP-AIR CONDITIONER
 

#SEBP49600840
 

103-9527: CONDENSER GP-REFRIGERANT

103-9527 CONDENSER GP-REFRIGERANT -WITH FANS
S/N JHB1-UP; LAY1-UP
PART OF 237-1000 CONDENSER & MTG GP-REFRIGERANT
Type 2
AN ATTACHMENT
i05296492 SEBP4960
1039527 CONDENSER GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(CONDENSER FAN MOTOR)  
2. 3S-2093 C [3] STRAP-CABLE  
7. 9X-3452 [2] GUARD AS-FAN  
8. 124-8490 [1] HARNESS AS-HEATER & AIR COND  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 20-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1056 [4] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
9. 399-4829 C [2] FAN AS-CONDENSER (5-BLADE)  
11. 203-2070 [8] MOUNT  
12. 204-9530 [4] TUBE  
13. 216-0805 [1] KIT-COIL (AIR CONDITIONER)  
    (INCLUDES COIL, TUBES, MOUNTS, BOLTS, & WASHERS)
14. 381-2492 C [1] CASE AS  
16. 5C-2890 CM [9] NUT (M6X1-THD)  
17. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4222 [4] WASHER-PLATED (11X32X2.5-MM THK)  
22. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
23. 8T-4192 M [12] BOLT (M12X1.75X25-MM)  
24. 9X-8256 C [9] WASHER (6.6X12X2-MM THK)  
25. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-6685 M [4] BOLT (M10X1.5X110-MM)  
28. 5P-5924 D SEAL (0.1-M EACH)  
29. 5P-5672 D SEAL (0.6-M EACH)  
31. 1P-6522 C [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP49600841
 

239-2385: CONTROL & MTG GP-JOYSTICK

239-2385 CONTROL & MTG GP-JOYSTICK -BULLDOZER
S/N JHB1-UP; LAY1-UP
PART OF 277-8760, 277-8761 CONTROL AR-HYDRAULIC IMPLEMENT
Type 1
AN ATTACHMENT
i02418952 SEBP4960
2392385 CONTROL & MTG GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-4702 [1] PLATE  
2. 172-5291 M [3] SCREW (M10X1.5X30-MM)  
3. 238-7793 [1] PLATE AS  
4. 238-8270 [1] GASKET  
5. 239-2247 [1] PLATE AS  
6. 240-8613 Y [1] CONTROL GP-JOYSTICK (BULLDOZER)  
7. 242-5200 [1] GASKET  
8. 111-4627 M [4] SCREW-MACHINE (M6X1X30-MM)  
9. 166-3777 M [4] SCREW-BUTTON HEAD (M6X1X28-MM)  
10. 7X-7729 [3] WASHER (11X25X3-MM THK)  
11. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 9X-6381 [4] WASHER (6.5X12.5X1.6-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49600842
 

239-2385: CONTROL & MTG GP-JOYSTICK

239-2385 CONTROL & MTG GP-JOYSTICK -BULLDOZER
S/N JHB1-UP; LAY1-UP
PART OF 277-8760, 277-8761 CONTROL AR-HYDRAULIC IMPLEMENT
Type 2
AN ATTACHMENT
i02971541 SEBP4960
2392385 CONTROL & MTG GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-4702 [1] PLATE  
2. 172-5291 M [3] SCREW (M10X1.5X30-MM)  
3. 238-7793 [1] PLATE AS  
4. 238-8270 [1] GASKET  
5. 239-2247 [1] PLATE AS  
6. 318-1472 CY [1] CONTROL GP-JOYSTICK (BULLDOZER)  
7. 242-5200 [1] GASKET  
8. 111-4627 M [4] SCREW-MACHINE (M6X1X30-MM)  
9. 166-3777 M [4] SCREW-BUTTON HEAD (M6X1X28-MM)  
10. 7X-7729 [3] WASHER (11X25X3-MM THK)  
11. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 9X-6381 [4] WASHER (6.5X12.5X1.6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49600843
 

239-2385: CONTROL & MTG GP-JOYSTICK

239-2385 CONTROL & MTG GP-JOYSTICK -BULLDOZER
S/N JHB1-UP; LAY1-UP
PART OF 277-8760, 277-8761 CONTROL AR-HYDRAULIC IMPLEMENT
Type 3
AN ATTACHMENT
i06083337 SEBP4960
2392385 CONTROL & MTG GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-4702 [1] PLATE  
2. 172-5291 M [3] SCREW (M10X1.5X30-MM)  
3. 238-7793 [1] PLATE AS  
4. 238-8270 [1] GASKET  
5. 239-2247 [1] PLATE AS  
6. 457-4639 CY [1] CONTROL GP-JOYSTICK (BULLDOZER)  
7. 242-5200 [1] GASKET  
8. 111-4627 M [4] SCREW-MACHINE (M6X1X30-MM)  
9. 166-3777 M [4] SCREW-BUTTON HEAD (M6X1X28-MM)  
10. 7X-7729 [3] WASHER (11X25X3-MM THK)  
11. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 9X-6381 [4] WASHER (6.5X12.5X1.6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49600844
 

294-2145: CONTROL & MTG GP-JOYSTICK

294-2145 CONTROL & MTG GP-JOYSTICK
S/N JHB1-UP; LAY1-UP
PART OF 296-7750 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
i03865497 SEBP4960
2942145 CONTROL & MTG GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-5291 M [3] SCREW (M10X1.5X30-MM)  
2. 199-4275 Y [1] VALVE GP-PILOT (IMPLEMENT, REAR)  
3. 238-7793 [1] PLATE AS  
4. 238-8270 [1] GASKET  
5. 239-2247 [1] PLATE AS  
6. 240-8613 Y [1] CONTROL GP-JOYSTICK (IMPLEMENT)  
7. 242-5200 [1] GASKET  
8. 111-4627 M [4] SCREW-MACHINE (M6X1X30-MM)  
9. 166-3777 M [4] SCREW-BUTTON HEAD (M6X1X28-MM)  
10. 7X-7729 [3] WASHER (11X25X3-MM THK)  
11. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 9X-6381 [4] WASHER (6.5X12.5X1.6-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49600845
 

224-2793: CONTROL & MTG GP-PEDAL

224-2793 CONTROL & MTG GP-PEDAL -GOVERNOR, BRAKE
S/N JHB1-UP; LAY1-UP
PART OF 269-2046 POWER TRAIN AR
i02402823 SEBP4960
2242793 CONTROL & MTG GP-PEDAL Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-7077 [2] ROD-THREADED  
2. 224-2791 Y [1] PEDAL GP-GOVERNOR & BRAKE  
3. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
4. 8T-4133 M [2] NUT (M10X1.5-THD)  
5. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49600846
 

161-3615: CONTROL GP-HANDLE

161-3615 CONTROL GP-HANDLE -BULLDOZER
S/N JHB1-UP; LAY1-UP
PART OF 222-1150, 296-1490 CONTROL GP-PILOT OPERATED HYD
ALSO AN ATTACHMENT
i01021083 SEBP4960
1613615 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-1079 [1] CONTROL GP-HANDLE (BULLDOZER)  
2. 4B-9808 [2] SETSCREW (1/4-20X0.5-IN)  
 

#SEBP49600847
 

224-9450: CONTROL GP-HANDLE

224-9450 CONTROL GP-HANDLE -STEERING, TRANSMISSION
S/N JHB1-UP; LAY1-UP
PART OF 272-0016, 298-5625 CONTROL GP-STEERING & XMSN
Type 1
ALSO AN ATTACHMENT
i02402845 SEBP4960
2249450 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-3340 [1] BOLT (10-24X1-IN)  
2. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 6V-3545 [1] BEARING-ROLLER  
4. 7X-4771 [1] SEAL-V-RING  
5. 186-3735 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 9W-1464 [2] SCREW (1/4-20X1-IN)  
7. 110-7882 [1] SWITCH AS-LIMIT (REVERSE)  
  5S-4246 [3] LOCKWASHER  
  6V-8818 [3] SCREW-MACHINE (4-40-THD)  
8. 111-8642 [1] COVER-FRONT  
9. 111-8950 [1] ANGLE  
10. 112-4740 [1] HANDLE  
11. 112-4757 [1] COVER  
12. 131-0447 [2] NUT-SPECIAL (15/32-32-THD)  
13. 132-7419 [1] SWITCH AS-PUSH BUTTON (DOWNSHIFT)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
14. 132-7450 [1] SWITCH AS-PUSH BUTTON (UPSHIFT)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
15. 151-5803 [1] SHAFT AS-DETENT  
16. 151-9275 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
17. 158-2734 [2] SPRING  
18. 158-2735 [1] BASE  
19. 226-9423 [2] SPRING  
20. 229-5354 [1] WIRE AS  
21. 103-6262 [2] SCREW-MACHINE (4-40X0.63-IN)  
22. 110-2028 [2] SCREW-PAN HEAD (10-14X0.75-IN)  
23. 219-2391 [1] SENSOR GP-POSITION (DIRECTION CONTROL)  
  9G-3695 [1] PLUG-SEAL  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
24. 5H-9899 [1] RING-RETAINING (EXTERNAL)  
25. 6V-1232 [2] SCREW-BUTTON HEAD (8-32X9.52-MM)  
26. 6V-2314 M [2] BOLT (M5X0.8X35-MM)  
27. 7X-0584 [1] WASHER-HARD (13.5X20.5X2-MM THK)  
28. 7Y-5226 M [2] NUT (M5X0.8-THD)  
29. 8M-2771 [1] CLIP  
30. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
32. 6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.3-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP49600848
 

224-9450: CONTROL GP-HANDLE

224-9450 CONTROL GP-HANDLE -STEERING, TRANSMISSION
S/N JHB1-UP; LAY1-UP
PART OF 272-0016, 298-5625 CONTROL GP-STEERING & XMSN
Type 2
ALSO AN ATTACHMENT
i03905980 SEBP4960
2249450 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-3340 [1] BOLT (10-24X1-IN)  
2. 151-9275 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 6V-3545 [1] BEARING-ROLLER  
4. 7X-4771 [1] SEAL-V-RING  
5. 8T-8729 [6] PIN-CONNECTOR (16-GA TO 20-GA)  
6. 9W-1464 [2] SCREW (1/4-20X1-IN)  
7. 110-7882 [1] SWITCH AS-LIMIT (REVERSE)  
  5S-4246 [3] LOCKWASHER  
  6V-8818 [3] SCREW-MACHINE (4-40-THD)  
8. 111-8642 [1] COVER-FRONT  
9. 111-8950 [1] ANGLE  
10. 112-4740 [1] HANDLE  
11. 112-4757 [1] COVER  
12. 131-0447 [2] NUT-SPECIAL (15/32-32-THD)  
13. 132-7419 [1] SWITCH AS-PUSH BUTTON (DOWNSHIFT)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
14. 132-7450 [1] SWITCH AS-PUSH BUTTON (UPSHIFT)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
15. 151-5803 [1] SHAFT AS-DETENT  
17. 158-2734 [2] SPRING  
18. 158-2735 [1] BASE  
19. 226-9423 [2] SPRING  
20. 229-5354 [1] WIRE AS  
21. 103-6262 [2] SCREW-MACHINE (4-40X0.63-IN)  
22. 110-2028 [2] SCREW-PAN HEAD (10-14X0.75-IN)  
23. 266-1475 C [1] SENSOR GP-POSITION (DIRECTION CONTROL)  
  9G-3695 [1] PLUG-SEAL  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
24. 5H-9899 [1] RING-RETAINING (EXTERNAL)  
25. 6V-1232 [2] SCREW-BUTTON HEAD (8-32X9.52-MM)  
26. 6V-2314 M [2] BOLT (M5X0.8X35-MM)  
27. 7X-0584 [1] WASHER-HARD (13.5X20.5X2-MM THK)  
28. 5C-2874 M [2] NUT (M5X0.8-THD)  
29. 3S-2093 C [1] STRAP-CABLE  
30. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
32. 6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.3-M)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP49600849
 

231-2222: CONTROL GP-HANDLE

231-2222 CONTROL GP-HANDLE -WINCH
S/N JHB1-UP; LAY1-UP
PART OF 303-1222 CONTROL GP-WINCH
AN ATTACHMENT
i02616662 SEBP4960
2312222 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 285-8465 [1] SWITCH (WINCH CONTROL)  
2. 285-8466 [1] BOOT  
3. 155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
4. 9W-0844 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
5. 8T-8737 [1] PLUG-SEAL  
 

Information:

Special Instruction
Refrigerant Compressor Functional Test for All Caterpillar Machines{1802}
Refrigerant Compressor Functional Test for All Caterpillar Machines{1802}
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Magazine
Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07
New Air Conditioning Accumulators Improve Service Life {7309}
1998/02/02
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2004/08/02
Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2000/10/30
Preparation of Air Conditioner Units for Seasonal Use {7320}
2002/05/27
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
2004/05/17
Refrigerant Identification Instrument is Available {1809}
2006/08/14
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/07/18
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
2012/08/24
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

Caterpillar Parts SIS Catalog D6T :

CONDENSER GP-REFRIGERANT
103-9527 CONDENSER GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
237-1000 CONDENSER & MTG GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
168-8783 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
241-8240 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
106-5122 COMPRESSOR GP-REFRIGERANT
283-0581 CANOPY AR
CAB GP
335-8395 CAB GP
CAB GP
286-1164 CAB GP
CONTROL & MTG GP-JOYSTICK
239-2385 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
239-2385 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
239-2385 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-JOYSTICK
294-2145 CONTROL & MTG GP-JOYSTICK
CONTROL & MTG GP-PEDAL
224-2793 CONTROL & MTG GP-PEDAL
CONTROL GP-HANDLE
161-3615 CONTROL GP-HANDLE
CONTROL GP-HANDLE
224-9450 CONTROL GP-HANDLE
CONTROL GP-HANDLE
224-9450 CONTROL GP-HANDLE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.