HYDRAULIC SYSTEM
VALVE GP-SOLENOIDIMPLEMENTS
BRACE GPBULLDOZER GP
HYDRAULIC SYSTEM
VALVE GP-SOLENOID
#SEBP49610780
152-8345: VALVE GP-SOLENOID
152-8345 VALVE GP-SOLENOID
S/N KJL1-UP; SKL1-UP
24-VOLT
PART OF 180-8569 VALVE GP-DIVERTER
AN ATTACHMENT
S/N KJL1-UP; SKL1-UP
24-VOLT
PART OF 180-8569 VALVE GP-DIVERTER
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-9987 | [1] | WASHER (8.3X28X2.5-MM THK) | |
| 2. | 111-0343 | [1] | LOCKNUT (5/16-18-THD) | |
| 3. | 152-8343 | [1] | CARTRIDGE AS-VALVE | |
| 8C-9987 | [1] | WASHER (8.3X28X2.5-MM THK) | ||
| 111-0343 | [1] | LOCKNUT (5/16-18-THD) | ||
| 4. | 218-9894 | [1] | COIL AS (24-VOLT) | |
| 1S-9593 | [2] | STRAP-CABLE | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 8J-9348 | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| (INCLUDES SEALS & RINGS) | ||||
#SEBP49610781
201-0950: VALVE GP-SOLENOID
201-0950 VALVE GP-SOLENOID
S/N KJL1-UP; SKL1-UP
24-VOLT. PARKING BRAKE
PART OF 269-2081 LINES GP-WINCH, 226-4751, 520-2181 MANIFOLD GP-CONTROL, 239-5317 VALVE & MTG GP-BULLDOZER
ALSO AN ATTACHMENT
S/N KJL1-UP; SKL1-UP
24-VOLT. PARKING BRAKE
PART OF 269-2081 LINES GP-WINCH, 226-4751, 520-2181 MANIFOLD GP-CONTROL, 239-5317 VALVE & MTG GP-BULLDOZER
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 122-1133 | [1] | COIL AS (24-VOLT) | |
| 1S-9593 | [2] | STRAP-CABLE | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 156-5970 | [1] | NUT (1/2-20-THD) | |
| 3. | 171-8772 J | [1] | VALVE AS-SOLENOID | |
| 156-5970 | [1] | NUT (1/2-20-THD) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 195-7430 J | KIT-SEAL (SOLENOID VALVE) | |||
| (INCLUDES O-RING SEALS & BACKUP RINGS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP49610782
235-4605: VALVE GP-SOLENOID
235-4605 VALVE GP-SOLENOID
S/N KJL1-UP; SKL1-UP
24-VOLT. HOIST CONTROL
PART OF 239-5317 VALVE & MTG GP-BULLDOZER
FIELD REPLACEMENT ORDER @@@@@341-9214@@@@@
AN ATTACHMENT
S/N KJL1-UP; SKL1-UP
24-VOLT. HOIST CONTROL
PART OF 239-5317 VALVE & MTG GP-BULLDOZER
FIELD REPLACEMENT ORDER @@@@@341-9214@@@@@
AN ATTACHMENT
For full view, you need register
#SEBP49610783
341-9214: VALVE GP-SOLENOID
341-9214 VALVE GP-SOLENOID
S/N KJL1-UP; SKL1-UP
PART OF 239-5317 VALVE & MTG GP-BULLDOZER
FIELD REPLACEMENT FOR @@@@@235-4605@@@@@
AN ATTACHMENT
S/N KJL1-UP; SKL1-UP
PART OF 239-5317 VALVE & MTG GP-BULLDOZER
FIELD REPLACEMENT FOR @@@@@235-4605@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 191-9247 | [1] | WASHER (19.15X31.65X2.36-MM THK) | |
| 2. | 198-2914 | [1] | NUT (3/4-32-THD) | |
| 3. | 235-4606 | [1] | CARTRIDGE AS-VALVE | |
| 6V-4589 | [1] | SEAL-O-RING | ||
| 8L-2746 | [1] | SEAL-O-RING | ||
| 033-6043 | [1] | SEAL-O-RING | ||
| 4. | 312-8629 | [1] | COIL AS (24-VOLT) | |
| 5. | 316-1438 | [1] | CARTRIDGE AS | |
| 214-7568 | [2] | SEAL-O-RING |
#SEBP49610784
247-5706: BRACE GP-BULLDOZER
247-5706 BRACE GP-BULLDOZER
S/N A6B1-UP; B8B1-UP
PART OF 257-8308, 257-8309 BULLDOZER AR-ANGLING
AN ATTACHMENT
S/N A6B1-UP; B8B1-UP
PART OF 257-8308, 257-8309 BULLDOZER AR-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-4626 | [2] | PIN-COTTER | |
| 2. | 3J-6573 | [2] | SCREW-ADJUSTMENT | |
| 3. | 4F-0255 | [2] | PIN | |
| 4. | 4F-1252 | [2] | PIN | |
| 5. | 4T-5495 | [2] | STUD-BALL | |
| 6. | 3J-1770 | [2] | LOCK PIN | |
| 7. | 8E-5701 B | [52] | SHIM (0.8-MM THK) | |
| 8. | 160-6306 | [2] | CAP-BEARING | |
| 9. | 227-0841 Y | [2] | CYLINDER GP-TILT | |
| 10. | 247-5697 | [1] | ARM AS (RH) | |
| 11. | 247-5698 | [1] | ARM AS (LH) | |
| 12. | 251-9828 | [4] | CAP-BEARING | |
| 13. | 251-9834 B | [104] | SHIM (0.8-MM THK) | |
| 14. | 1U-1176 | [2] | PIN | |
| 15. | 7X-2564 M | [8] | BOLT (M20X2.5X90-MM) | |
| 16. | 8T-4123 | [8] | WASHER (22X35X3.5-MM THK) | |
| 17. | 8T-4187 M | [4] | BOLT (M20X2.5X80-MM) | |
| 18. | 8T-6381 M | [8] | BOLT (M20X2.5X120-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49610785
288-8484: BRACE GP-BULLDOZER
288-8484 BRACE GP-BULLDOZER
S/N MMX1-UP
PART OF 288-8435, 288-8436 BULLDOZER AR-ANGLING
AN ATTACHMENT
S/N MMX1-UP
PART OF 288-8435, 288-8436 BULLDOZER AR-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-4626 | [2] | PIN-COTTER | |
| 2. | 3J-1770 | [2] | LOCK PIN | |
| 3. | 3J-6573 | [2] | SCREW-ADJUSTMENT | |
| 4. | 4F-0255 | [2] | PIN | |
| 5. | 4F-1252 | [2] | PIN | |
| 6. | 4T-5495 | [2] | STUD-BALL | |
| 7. | 8E-5701 B | [52] | SHIM (0.8-MM THK) | |
| 8. | 160-6306 | [2] | CAP-BEARING | |
| 9. | 227-0841 Y | [2] | CYLINDER GP-TILT | |
| 10. | 251-9828 | [4] | CAP-BEARING | |
| 11. | 251-9834 B | [104] | SHIM (0.8-MM THK) | |
| 12. | 288-8485 | [1] | ARM AS (RH) | |
| 3Y-3866 | [1] | NUT (2-3/4-8-THD) | ||
| 4B-4098 | [1] | PLUG-CUP | ||
| 9W-5375 | [1] | BAR | ||
| 251-9817 | [1] | BEARING | ||
| 13. | 288-8486 | [1] | ARM AS (LH) | |
| 3Y-3866 | [1] | NUT (2-3/4-8-THD) | ||
| 4B-4098 | [1] | PLUG-CUP | ||
| 9W-5375 | [1] | BAR | ||
| 251-9817 | [1] | BEARING | ||
| 14. | 1U-1176 | [2] | PIN | |
| 15. | 7X-2564 M | [8] | BOLT (M20X2.5X90-MM) | |
| 16. | 8T-4123 | [8] | WASHER (22X35X3.5-MM THK) | |
| 17. | 8T-4187 M | [4] | BOLT (M20X2.5X80-MM) | |
| 18. | 8T-6381 M | [8] | BOLT (M20X2.5X120-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49610786
257-8308: BULLDOZER AR-ANGLING
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4Z-9412 Y | [1] | TRUNNION GP-BULLDOZER | |
| 2. | 227-4005 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 3. | 227-4006 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 4. | 238-9559 Y | [1] | MOUNTING GP-CYLINDER | |
| 5. | 245-4293 Y | [1] | BLADE GP-ANGLING | |
| 6. | 247-5706 Y | [1] | BRACE GP-BULLDOZER | |
| 7. | 247-5709 Y | [1] | LINES GP-TILT CYLINDER | |
| 8. | 248-2339 Y | [1] | C-FRAME GP | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49610787
257-8309: BULLDOZER AR-ANGLING
257-8309 BULLDOZER AR-ANGLING
S/N A6B1-UP
FOR USE WITH @@@@@227-4005@@@@@, @@@@@227-4006@@@@@, @@@@@238-9559@@@@@
AN ATTACHMENT
S/N A6B1-UP
FOR USE WITH @@@@@227-4005@@@@@, @@@@@227-4006@@@@@, @@@@@238-9559@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4Z-9412 Y | [1] | TRUNNION GP-BULLDOZER | |
| 2. | 245-4293 Y | [1] | BLADE GP-ANGLING | |
| 3. | 247-5706 Y | [1] | BRACE GP-BULLDOZER | |
| 4. | 247-5709 Y | [1] | LINES GP-TILT CYLINDER | |
| 5. | 248-2339 Y | [1] | C-FRAME GP | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49610788
288-8435: BULLDOZER AR-ANGLING
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-1353 Y | [1] | TRUNNION GP-BULLDOZER | |
| 2. | 227-4007 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 3. | 227-4008 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 4. | 238-9559 Y | [1] | MOUNTING GP-CYLINDER | |
| 5. | 288-8438 Y | [1] | BLADE GP-ANGLING | |
| 6. | 288-8450 Y | [1] | C-FRAME GP | |
| 7. | 288-8474 Y | [1] | LINES GP-TILT CYLINDER | |
| 8. | 288-8484 Y | [1] | BRACE GP-BULLDOZER | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49610789
288-8436: BULLDOZER AR-ANGLING
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-1353 Y | [1] | TRUNNION GP-BULLDOZER | |
| 2. | 288-8438 Y | [1] | BLADE GP-ANGLING | |
| 3. | 288-8450 Y | [1] | C-FRAME GP | |
| 4. | 288-8474 Y | [1] | LINES GP-TILT CYLINDER | |
| 5. | 288-8484 Y | [1] | BRACE GP-BULLDOZER | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
