ELECTRICAL AND STARTING SYSTEM
RECEIVER GPWORK TOOLS
RIPPER GPGROUND ENGAGING TOOLS (G.E.T.)
ELECTRICAL AND STARTING SYSTEM
RECEIVER GP
#SEBP49621040
292-0302: MOUNTING GP-MAST
292-0302 MOUNTING GP-MAST -LASER RECEIVER
S/N DJG1-UP; WCG1-UP; WFH1-UP
TTT ELECTRIC MAST
PART OF 317-6527 GRADE CONTROL AR, 292-0293, 292-0312 GRADE CONTROL AR-LASER
S/N DJG1-UP; WCG1-UP; WFH1-UP
TTT ELECTRIC MAST
PART OF 317-6527 GRADE CONTROL AR, 292-0293, 292-0312 GRADE CONTROL AR-LASER
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP49621041
292-0303: MOUNTING GP-MAST
292-0303 MOUNTING GP-MAST -SATELLITE RECEIVER
S/N DJG1-UP; WCG1-UP; WFH1-UP
PART OF 290-5571, 292-0280 GRADE CONTROL AR-SATELLITE
S/N DJG1-UP; WCG1-UP; WFH1-UP
PART OF 290-5571, 292-0280 GRADE CONTROL AR-SATELLITE
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP49621042
224-4454: MOUNTING GP-RIPPER
224-4454 MOUNTING GP-RIPPER
S/N 1EH1-UP
PART OF 224-4449, 227-8797 RIPPER AR
AN ATTACHMENT
S/N 1EH1-UP
PART OF 224-4449, 227-8797 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0300 | [1] | BRACKET AS | |
| 3G-9995 | [2] | PLATE | ||
| 2. | 1U-0301 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 2K-6279 | [1] | BOSS | ||
| 3. | 7T-1975 | [1] | BRACKET AS | |
| 3G-9995 | [2] | PLATE | ||
| 4. | 9N-4449 B | [12] | SPACER (68X121X1.5-MM THK) | |
| 5. | 9N-4450 B | [4] | SPACER (68X120X5-MM THK) | |
| 6. | 9W-0609 | [4] | SPACER (53X100X35-MM THK) | |
| 7. | 1U-0159 | [2] | PIN | |
| 8. | 1U-0612 | [2] | PIN | |
| 9. | 9M-5854 | [20] | STUD-TAPERLOCK (1-8-THD) | |
| 10. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 11. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 12. | 6V-8190 | [20] | NUT (1-8-THD) | |
| 13. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 14. | 8T-5361 | [20] | WASHER-HARD (28X49X5-MM THK) | |
| 15. | 8T-5412 M | [2] | BOLT (M12X1.75X140-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP49621043
224-4449: RIPPER AR
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | |
| 2. | 224-4454 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 227-0842 Y | [1] | CYLINDER GP-RIPPER | |
| 4. | 235-8180 Y | [1] | LINES GP-RIPPER | |
| 5. | 235-8805 Y | [1] | RIPPER GP | |
| 7X-7644 F | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER) | ||||
| 8M-3494 F | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| (ON CARRIAGE AS ON RH SIDE OF RH TOWER) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49621044
224-4449: RIPPER AR
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | |
| 2. | 224-4454 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 325-5723 CY | [1] | CYLINDER GP-RIPPER | |
| 4. | 235-8180 Y | [1] | LINES GP-RIPPER | |
| 5. | 235-8805 Y | [1] | RIPPER GP | |
| 8M-3494 F | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| (ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 7X-7644 F | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| (ON RH & LH SIDES OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49621045
227-8797: RIPPER AR
227-8797 RIPPER AR
S/N 1EH1-UP
Type 1
REPLACED BY @@@@@224-4449@@@@@
CANNOT BE USED WITH 990-MM (39-IN) TRACK SHOE
AN ATTACHMENT
S/N 1EH1-UP
Type 1
REPLACED BY @@@@@224-4449@@@@@
CANNOT BE USED WITH 990-MM (39-IN) TRACK SHOE
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | |
| 2. | 224-4454 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 227-0842 Y | [1] | CYLINDER GP-RIPPER | |
| 4. | 235-8180 Y | [1] | LINES GP-RIPPER | |
| 5. | 235-8805 Y | [1] | RIPPER GP | |
| 7X-7644 F | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN REAR IDLER & REAR ROLLER) | ||||
| 8M-3494 F | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| (ON CARRIAGE AS ON RH SIDE OF RH TOWER) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49621046
227-8797: RIPPER AR
227-8797 RIPPER AR
S/N 1EH1-UP
Type 2
REPLACED BY @@@@@224-4449@@@@@
CANNOT BE USED WITH 990-MM (39-IN) TRACK SHOE
AN ATTACHMENT
S/N 1EH1-UP
Type 2
REPLACED BY @@@@@224-4449@@@@@
CANNOT BE USED WITH 990-MM (39-IN) TRACK SHOE
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | |
| 2. | 224-4454 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 235-8180 Y | [1] | LINES GP-RIPPER | |
| 4. | 235-8805 Y | [1] | RIPPER GP | |
| 5. | 325-5723 CY | [1] | CYLINDER GP-RIPPER | |
| 7X-7644 F | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN REAR IDLER & REAR ROLLER) | ||||
| 8M-3494 F | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| (ON CARRIAGE AS ON RH SIDE OF RH TOWER) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49621047
235-8805: RIPPER GP
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-0703 | [1] | BAR | |
| 2. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 3K-8510 | [1] | PIN | |
| 4. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 5. | 9J-8926 Y | [1] | TOOTH GP-RIPPER | |
| 6. | 9J-9598 | [2] | PIN | |
| 7. | 290-0862 | [1] | CARRIAGE AS | |
| 8. | 9W-0873 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | ||
| 9W-0876 | [2] | BUSHING | ||
| 9. | 189-0985 | [1] | FRAME & BEARING AS | |
| (EACH INCLUDES) | ||||
| 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | ||
| 9W-0099 | [4] | BUSHING | ||
| 10. | 1U-0159 | [2] | PIN | |
| 11. | 5C-6565 | [2] | BOLT (1/2-13X1.125-IN) | |
| 12. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 13. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 14. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 15. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4244 M | [8] | NUT (M12X1.75-THD) | |
| 17. | 8T-4648 M | [8] | BOLT (M12X1.75X70-MM) | |
| 18. | 8T-7929 M | [2] | BOLT (M12X1.75X180-MM) | |
| 19. | 9N-4449 B | [2] | SPACER (68X121X1.5-MM THK) | |
| 20. | 9N-4450 B | [4] | SPACER (68X120X5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49621048
174-9198: TOOTH GP-RIPPER
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8J-2189 Y | [1] | TOOTH GP-RIPPER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49621049
174-9199: TOOTH GP-RIPPER
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8J-2189 Y | [2] | TOOTH GP-RIPPER | ||
| Y | SEPARATE ILLUSTRATION | |||
