AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6Y-2039 EDGE GP-BIT & CUTTING S/N C4C1-UP; C4K1-UP; C4R1-UP; C4T1-UP; GDX1-UP; EPZ1-UP PART OF 251-9819 BLADE & EDGE GP-ANGLING AN ATTACHMENT D6T


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
ELECTRICAL AND STARTING SYSTEM
RECEIVER GP
WORK TOOLS
RIPPER GP

TRACK-TYPE TRACTOR D6T TRACK-TYPE TRACTOR GCT
 D6T TRACK-TYPE TRACTOR STD, XL Differential Steering GCT00001-UP (MACHINE) POWERED BY C9 Engine SEBP4963 D6T GCT   (2007)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
BLADE & EDGE GP-SEMI-UNIVERSAL
294-0808 BLADE & EDGE GP-SEMI-UNIVERSAL
EDGE GP-BIT & CUTTING
229-6957 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
6Y-2039 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
9W-3762 EDGE GP-BIT & CUTTING
174-9198 TOOTH GP-RIPPER
174-9199 TOOTH GP-RIPPER
 

#SEBP49631030
 

6Y-2039: EDGE GP-BIT & CUTTING

6Y-2039 EDGE GP-BIT & CUTTING
S/N C4C1-UP; C4K1-UP; C4R1-UP; C4T1-UP; GDX1-UP; EPZ1-UP
PART OF 251-9819 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
i00389082 SEBP4963
6Y2039 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-8874 [1] BIT-END (RH)  
  9W-8875 [1] BIT-END (LH)  
2. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
  5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
  2J-3506 [32] NUT-FULL (3/4-10-THD)  
3. 4T-2952 [4] EDGE-CUTTING  
 

#SEBP49631031
 

9W-3762: EDGE GP-BIT & CUTTING

9W-3762 EDGE GP-BIT & CUTTING
S/N D6C1-UP; SMC1-UP; C4L1-UP; C4N1-UP; GCT1-UP; C4W1-UP
PART OF 230-5557, 252-5857, 252-6450, 252-6453, 294-0806, 294-0808 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
i00454298 SEBP4963
9W3762 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-8874 [1] BIT-END (RH)  
2. 9W-8875 [1] BIT-END (LH)  
3. 9W-1878 [2] EDGE-CUTTING  
4. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
 

#SEBP49631032
 

292-0302: MOUNTING GP-MAST

292-0302 MOUNTING GP-MAST -LASER RECEIVER
S/N SMC1-UP; GCT1-UP
TTT ELECTRIC MAST
PART OF 317-6527 GRADE CONTROL AR, 292-0312 GRADE CONTROL AR-LASER, 292-0281 MAST GP
i02649290 SEBP4963
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4648 M [4] BOLT (M12X1.75X70-MM)  
  237-7552 [3] FILM-WARNING (LASER TRANSMITTER)  
  252-8744 [1] FILM-WARNING (BLADE, DO NOT CLIMB, READ OMM)  
  8T-4244 M [4] NUT (M12X1.75-THD)  
  8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP49631033
 

292-0303: MOUNTING GP-MAST

292-0303 MOUNTING GP-MAST -SATELLITE RECEIVER
S/N SMC1-UP; GCT1-UP
PART OF 290-5571, 292-0280 GRADE CONTROL AR-SATELLITE
i02618818 SEBP4963
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4648 M [4] BOLT (M12X1.75X70-MM)  
  252-8744 [1] FILM-WARNING (BLADE, DO NOT CLIMB, READ OMM)  
    (ON THE REAR OF THE MAST AT EYE LEVEL)
  8T-4244 M [4] NUT (M12X1.75-THD)  
  8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP49631034
 

224-4454: MOUNTING GP-RIPPER

224-4454 MOUNTING GP-RIPPER
S/N D6D1-UP
PART OF 224-4449 RIPPER AR
AN ATTACHMENT
i02454032 SEBP4963
2244454 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0300 [1] BRACKET AS  
  3G-9995 [2] PLATE  
2. 1U-0301 [2] BRACKET AS  
    (EACH INCLUDES)
  2K-6279 [1] BOSS  
3. 7T-1975 [1] BRACKET AS  
  3G-9995 [2] PLATE  
4. 9N-4449 B [12] SPACER (68X121X1.5-MM THK)  
5. 9N-4450 B [4] SPACER (68X120X5-MM THK)  
6. 9W-0609 [4] SPACER (53X100X35-MM THK)  
7. 1U-0159 [2] PIN  
8. 1U-0612 [2] PIN  
9. 9M-5854 [20] STUD-TAPERLOCK (1-8-THD)  
10. 6V-7687 M [2] LOCKNUT (M12X1.75-THD)  
11. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
12. 6V-8190 [20] NUT (1-8-THD)  
13. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
14. 8T-5361 [20] WASHER-HARD (28X49X5-MM THK)  
15. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49631035
 

391-8222: MOUNTING GP-RIPPER

391-8222 MOUNTING GP-RIPPER
S/N SMC1-UP; D6D1-UP; R1P1-UP; GCT1-UP
PART OF 451-2041 RIPPER AR
AN ATTACHMENT
i05775039 SEBP4963
3918222 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0300 [1] BRACKET AS  
2. 1U-0301 [2] BRACKET AS  
3. 7T-1975 [1] BRACKET AS  
4. 9N-4449 B [12] SPACER (68X121X1.5-MM THK)  
5. 9N-4450 B [4] SPACER (68X120X5-MM THK)  
6. 9W-0609 [2] SPACER (53X100X35-MM THK)  
7. 1U-0159 [2] PIN  
8. 1U-0612 [2] PIN  
9. 6V-7687 M [2] LOCKNUT (M12X1.75-THD)  
10. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
11. 299-3423 [20] NUT (1-8-THD)  
12. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
13. 299-3426 [20] WASHER-HARD (28X49X6-MM THK)  
14. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
15. 9M-5854 [20] STUD-TAPERLOCK (1-8-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49631036
 

224-4449: RIPPER AR

224-4449 RIPPER AR
S/N D6D1-905
AN ATTACHMENT
i02453980 SEBP4963
2244449 RIPPER AR Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1356 Y [1] GUARD GP-TRANSMISSION  
2. 224-4454 Y [1] MOUNTING GP-RIPPER  
3. 227-0842 Y [1] CYLINDER GP-RIPPER  
4. 235-8180 Y [1] LINES GP-RIPPER  
5. 235-8805 Y [1] RIPPER GP  
   
  8M-3494 F [1] PLATE-SERIAL NUMBER (RIPPER)  
    ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  7X-7644 F [2] FILM-IDENTIFICATION (TIE-DOWN)  
    ON RH & LH SIDES OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP49631037
 

224-4449: RIPPER AR

224-4449 RIPPER AR
S/N D6D906-UP
AN ATTACHMENT
i03607741 SEBP4963
2244449 RIPPER AR Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1356 Y [1] GUARD GP-TRANSMISSION  
2. 224-4454 Y [1] MOUNTING GP-RIPPER  
3. 325-5723 CY [1] CYLINDER GP-RIPPER  
4. 235-8180 Y [1] LINES GP-RIPPER  
5. 235-8805 Y [1] RIPPER GP  
   
  8M-3494 F [1] PLATE-SERIAL NUMBER (RIPPER)  
    (ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  7X-7644 F [2] FILM-IDENTIFICATION (TIE-DOWN)  
    (ON RH & LH SIDES OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER)
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP49631038
 

451-2041: RIPPER AR

451-2041 RIPPER AR
S/N SMC1-UP; D6D1-UP; R1P1-UP; GCT1-UP
PART OF 470-0334, 470-0335, 513-4803, 568-2630, 568-2631, 568-2632, 568-2633 DISTRIBUTION AR
AN ATTACHMENT
i05775015 SEBP4963
4512041 RIPPER AR Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1356 Y [1] GUARD GP-TRANSMISSION  
2. 7X-7644 [2] FILM-IDENTIFICATION (TIE-DOWN)  
3. 384-5351 Y [1] CYLINDER GP-RIPPER  
4. 387-1088 Y [1] RIPPER GP  
5. 387-1759 Y [1] LINES GP-RIPPER  
6. 391-8222 Y [1] MOUNTING GP-RIPPER  
  8M-3494 F [1] PLATE-SERIAL NUMBER (RIPPER)  
    (ON RH SIDE OF TOWER)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP49631039
 

235-8805: RIPPER GP

235-8805 RIPPER GP
S/N D6D1-UP
PART OF 224-4449 RIPPER AR
AN ATTACHMENT
i02454060 SEBP4963
2358805 RIPPER GP Parts scheme
  For full view, you need register

Parts for your D6T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0703 [1] BAR  
2. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
3. 3K-8510 [1] PIN  
4. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
5. 9J-8926 Y [1] TOOTH GP-RIPPER  
6. 9J-9598 [2] PIN  
7. 290-0862 [1] CARRIAGE AS  
8. 9W-0873 [2] LINK AS  
    (EACH INCLUDES)
  3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
9. 189-0985 [1] FRAME & BEARING AS  
  3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
  9W-0099 [4] BUSHING  
10. 1U-0159 [2] PIN  
11. 5C-6565 [2] BOLT (1/2-13X1.125-IN)  
12. 6V-7687 M [2] LOCKNUT (M12X1.75-THD)  
13. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
14. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
15. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4244 M [8] NUT (M12X1.75-THD)  
17. 8T-4648 M [8] BOLT (M12X1.75X70-MM)  
18. 8T-7929 M [2] BOLT (M12X1.75X180-MM)  
19. 9N-4449 B [2] SPACER (68X121X1.5-MM THK)  
20. 9N-4450 B [4] SPACER (68X120X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D6T :

EDGE GP-BIT & CUTTING
229-6957 EDGE GP-BIT & CUTTING
CONTROL GP-WINCH
303-1222 CONTROL GP-WINCH
BLADE GP-STRAIGHT
223-4003 BLADE GP-STRAIGHT
BLADE GP-SEMI-UNIVERSAL
252-5856 BLADE GP-SEMI-UNIVERSAL
BLADE GP-SEMI-UNIVERSAL
230-5558 BLADE GP-SEMI-UNIVERSAL
BLADE GP-ANGLING
251-9818 BLADE GP-ANGLING
BLADE AS-STRAIGHT
223-4009 BLADE AS-STRAIGHT
BLADE AS-SEMI-UNIVERSAL
294-0819 BLADE AS-SEMI-UNIVERSAL
EDGE GP-BIT & CUTTING
9W-3762 EDGE GP-BIT & CUTTING
292-0302 MOUNTING GP-MAST
292-0303 MOUNTING GP-MAST
MOUNTING GP-RIPPER
224-4454 MOUNTING GP-RIPPER
MOUNTING GP-RIPPER
391-8222 MOUNTING GP-RIPPER
RIPPER AR
224-4449 RIPPER AR
RIPPER AR
224-4449 RIPPER AR
RIPPER AR
451-2041 RIPPER AR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.