ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGBATTERY GP
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
#SEBP49640110
112-5041: ALTERNATOR GP-CHARGING
112-5041 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 50-AMPERE
PART OF 289-3121 WASTE HANDLING AR
FIELD REPLACEMENT FOR @@@@@100-5047@@@@@
AN ATTACHMENT
S/N C7G1000-UP
24-VOLT, 50-AMPERE
PART OF 289-3121 WASTE HANDLING AR
FIELD REPLACEMENT FOR @@@@@100-5047@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D7G2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-2011 | [1] | SCREW-MACHINE (1/4-20X0.5-IN) | |
| 2. | 1H-3244 | [1] | LOCKWASHER | |
| 3. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 4. | 187-2034 | [1] | NUT-FLANGE (5/8-18-THD) | |
| 5. | 9S-2260 | [1] | PLATE-COVER | |
| 6. | 9S-2255 | [1] | COVER | |
| 7. | 9S-2262 | [1] | GASKET | |
| 8. | 9S-2544 | [6] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 9. | 9B-7233 | [10] | LOCKWASHER | |
| 10. | 9S-2437 | [5] | SCREW-TAPPING (10-24X19.05-MM) | |
| 11. | 8F-1434 | [5] | LOCKWASHER | |
| 12. | 5P-3418 | [1] | BEARING-ROLLER | |
| 13. | 5P-3419 | [1] | RACE-BEARING INNER | |
| 14. | 9S-2396 | [1] | BUSHING-TERMINAL | |
| 15. | 9S-2393 | [3] | DIODE-NEGATIVE | |
| 16. | 9N-0943 | [1] | PLUG-BEARING WELL | |
| 17. | 9F-2247 | [1] | PLUG-PIPE | |
| 18. | 9S-2292 J | [1] | HEAT SINK AS | |
| 9S-2290 J | [3] | KIT-DIODE JUNCTION STUD (HEAT SINK) | ||
| (EACH INCLUDES INSULATOR & TERMINAL STUD) | ||||
| 9S-2291 J | [3] | KIT-POSITIVE DIODE (HEAT SINK) | ||
| 19. | 100-6656 | [1] | DIODE AS-ALTERNATOR | |
| 20. | 9S-9830 | [4] | SCREW-FORMING (8-32X19.05-MM) | |
| 21. | 8C-9660 | [4] | WASHER (4.6X7.9X0.8-MM THK) | |
| 22. | 9S-2300 | [4] | INSULATOR | |
| 23. | 9S-2301 | [1] | INSULATION | |
| 24. | 9S-2248 | [1] | COIL & SUPPORT AS | |
| 25. | 9N-3388 | [3] | BOLT (10-24X0.75-IN) | |
| 26. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 27. | 7N-9023 | [1] | SCREW AS (8-32X26.9-MM) | |
| 28. | 6N-1872 | [2] | SCREW AS (8-32X1.25-IN) | |
| 29. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 30. | 100-6657 | [1] | PLATE | |
| 31. | 9S-2302 | [1] | ROTOR AS | |
| 32. | 9S-2004 | [1] | STATOR AS (ALTERNATOR AIR) | |
| 33. | 9S-2005 | [1] | GROMMET | |
| 34. | 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | |
| 35. | 9S-2013 | [1] | KIT-RELAY TERMINAL (ALTERNATOR AIR) | |
| (INCLUDES BUSHING, INSULATED WASHER, WASHER, NUT ASSEMBLIES, & STUD) | ||||
| 36. | 100-6658 | [1] | WIRE AS-ALTERNATOR | |
| 37. | 9S-2012 | [1] | KIT-OUTPUT TERMINAL (ALTERNATOR AIR) | |
| (INCLUDES GASKETS, NUT ASSEMBLY, & TERMINAL) | ||||
| 38. | 9S-2389 | [1] | STUD AS | |
| 39. | 9L-6770 | [1] | CAP-DUST | |
| 40. | 2P-5616 | [1] | FRAME-DRIVE END | |
| 41. | 9S-2390 | [1] | RETAINER | |
| 42. | 9X-2500 | [4] | SCREW-HEX FLANGE (10-24X38.1-MM) | |
| 43. | 9S-2009 | [4] | BOLT-FLANGE HEAD (10-24X3.625-IN) | |
| 44. | 100-6532 | [1] | COLLAR-ALTERNATOR | |
| 45. | 5P-7807 | [1] | BALL BEARING | |
| 46. | 100-6531 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| J | KITS MARKED J SERVICE(S) PART MARKED J | |||
#SEBP49640111
169-3345: ALTERNATOR GP-CHARGING
169-3345 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 50-AMPERE
FIELD REPLACEMENT FOR @@@@@100-5047@@@@@, @@@@@100-5045@@@@@, @@@@@100-5046@@@@@
S/N C7G1000-UP
24-VOLT, 50-AMPERE
FIELD REPLACEMENT FOR @@@@@100-5047@@@@@, @@@@@100-5045@@@@@, @@@@@100-5046@@@@@
For full view, you need register
Parts for your D7G2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 185-2653 | [1] | FRAME | |
| 2. | 185-2652 | [1] | FRAME AS | |
| 3. | 185-2639 | [1] | FAN AS (ALTERNATOR) | |
| 4. | 185-2640 | [1] | FRAME AS | |
| 5. | 185-2645 | [1] | FRAME | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 190-0065 | [1] | STATOR AS-ALTERNATOR | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS (ALTERNATOR) | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 | [1] | LOCKWASHER | |
| 21. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 22. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 1H-3244 | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 185-2655 | [1] | KIT-BEARING (ALTERNATOR) | ||
| (INCLUDES BEARINGS) | ||||
| 199-8436 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT KITS, GROMMET & NUT) | ||||
| 199-7891 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INSULATORS, WASHERS & NUTS) | ||||
| 185-2658 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES BOLT KITS) | ||||
#SEBP49640112
185-5294: ALTERNATOR GP-CHARGING
185-5294 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 65-AMPERE
PART OF 273-6085, 292-9306 AIR CONDITIONER AR
AN ATTACHMENT
S/N C7G1000-UP
24-VOLT, 65-AMPERE
PART OF 273-6085, 292-9306 AIR CONDITIONER AR
AN ATTACHMENT
For full view, you need register
Parts for your D7G2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 185-2653 | [1] | FRAME | |
| 2. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 185-2639 | [1] | FAN AS | |
| 4. | 1H-3244 | [1] | LOCKWASHER | |
| 5. | 185-2645 | [1] | FRAME | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 9. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 185-2642 | [1] | STATOR AS | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 185-2655 | [1] | KIT-BEARING (ALTERNATOR) | ||
| (INCLUDES 2 BEARINGS) | ||||
| 199-8436 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES HOLDER AS, PLATE INSULATOR, PIN, BOLT KIT, GROMMET, & NUT) | ||||
| 199-7891 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INSULATORS, WASHERS, & NUTS) | ||||
| 185-2658 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| INCLUDES BOLTS) | ||||
#SEBP49640113
3T-6352: ALTERNATOR GP-CHARGING
3T-6352 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 35-AMPERE
PART OF 6N-9294 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 35-AMPERE
PART OF 6N-9294 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your D7G2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-9024 | [4] | BOLT (10-24X2.5-IN) | |
| 2. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 3. | 187-2034 | [1] | NUT-FLANGE (5/8-18-THD) | |
| 4. | 3E-5454 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 5. | 7N-7810 | [1] | FRAME AS-DRIVE END | |
| 6. | 7N-7805 | [1] | HOUSING | |
| 7. | 6V-2202 | [1] | BALL BEARING | |
| 8. | 9S-2437 | [3] | SCREW-TAPPING (10-24X19.05-MM) | |
| 9. | 7N-7809 | [1] | PLATE | |
| 10. | 5P-6920 | [1] | BEARING-ROLLER | |
| 11. | 030-9612 | [5] | SCREW-FORMING (10-24X0.5-IN) | |
| 12. | 7N-7806 | [1] | COIL AS-FIELD | |
| 13. | 7N-7800 | [1] | ROTOR AS | |
| 14. | 7N-7804 | [1] | STATOR AS | |
| 15. | 9L-2137 | [1] | RETAINER AS | |
| 16. | 9N-3388 | [4] | BOLT (10-24X0.75-IN) | |
| 17. | 7N-7795 | [1] | COLLAR | |
| 18. | 9S-2544 | [2] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 19. | 9L-2140 | [1] | PLATE | |
| 20. | 9L-2139 | [1] | WASHER-FELT (1.31X1.68X0.125-IN THK) | |
| 21. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 22. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 23. | 6N-1872 | [2] | SCREW AS (8-32X1.25-IN) | |
| 24. | 9B-7233 | [6] | LOCKWASHER | |
| 25. | 8F-1434 | [4] | LOCKWASHER | |
| 26. | 7N-9023 | [2] | SCREW AS (8-32X26.9-MM) | |
| 27. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 28. | 1H-3244 | [1] | LOCKWASHER | |
| 29. | 7N-7811 | [1] | CONNECTOR | |
| 30. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 31. | 112-9119 | [1] | DIODE AS-ALTERNATOR | |
| 32. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 33. | 206-4202 | [1] | RECTIFIER AS | |
| 34. | 7N-9021 | [1] | SCREW AS (8-32X1.34-IN) | |
| 35. | 7N-7796 | [1] | BUSHING-TERMINAL | |
| 36. | 7N-7802 | [1] | CAPACITOR AS | |
| 37. | 7N-7801 | [1] | CONNECTOR | |
| 38. | 7N-7798 | [1] | CONNECTOR | |
| 39. | 9L-6770 | [1] | CAP-DUST | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7N-7807 | [1] | KIT-OUTPUT TERMINAL (ALTERNATOR) | ||
| (INCLUDES INSULATOR, SCREW, WASHERS, LOCKWASHER, NUT & ADAPTER) | ||||
| 7N-7808 | [1] | KIT-RELAY TERMINAL (ALTERNATOR) | ||
| (INCLUDES STUD, BUSHINGS, WASHERS & NUT AS) | ||||
#SEBP49640114
4N-5090: ALTERNATOR GP-CHARGING
4N-5090 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 35-AMPERE
PART OF 270-4120 INSTALLATION AR-ENGINE
S/N C7G1000-UP
24-VOLT, 35-AMPERE
PART OF 270-4120 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your D7G2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-9294 Y | [1] | ALTERNATOR GP-CHARGING | |
| 2. | 9L-5134 | [1] | ROD | |
| 3. | 1B-4430 | [2] | NUT-JAM (1/2-20-THD) | |
| 4. | 9L-6329 | [1] | BLOCK | |
| 5. | 8C-4436 | [1] | BOLT (1/2-13X1.375-IN) | |
| 6. | 2M-0849 | [4] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 8. | 7X-0339 | [1] | BOLT (1/2-13X6.25-IN) | |
| 9. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 9S-1240 | [1] | BRACKET AS | |
| 1F-0748 | [1] | NUT-WELD (1/2-13-THD) | ||
| 11. | 9M-9811 | [1] | WIRE AS | |
| 12. | 1A-1460 | [1] | BOLT (1/2-13X2-IN) | |
| 13. | 6N-0714 | [1] | PULLEY-ALTERNATOR | |
| 14. | 2W-6344 | [1] | GUARD | |
| 15. | 2W-9286 | [1] | BRACKET | |
| 16. | 0S-1619 | [4] | BOLT (3/8-16X3-IN) | |
| 17. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49640115
6N-9294: ALTERNATOR GP-CHARGING
6N-9294 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 35-AMPERE
PART OF 4N-5090 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 35-AMPERE
PART OF 4N-5090 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your D7G2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP49640116
7N-9720: ALTERNATOR GP-CHARGING
7N-9720 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 35-AMPERE
PART OF 6N-9294 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 35-AMPERE
PART OF 6N-9294 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your D7G2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-7566 | [1] | FRAME-DRIVE END | |
| 2. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 3. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 4. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 5. | 9G-7549 | [1] | SPACER (25X40X9.5-MM THK) | |
| 6. | 9G-7551 | [1] | BEARING | |
| 7. | 9G-7558 | [1] | COIL AS-FIELD | |
| 8. | 9G-7548 | [1] | RING | |
| 9. | 9G-7561 | [1] | STATOR AS | |
| 10. | 9G-7560 | [1] | ROTOR AS | |
| 11. | 3T-1887 | [1] | DIODE AS | |
| 12. | 9G-7568 | [1] | FRAME AS-REAR | |
| 13. | 9G-7562 | [1] | COVER AS | |
| 14. | 9G-7553 | [1] | RING-COVER | |
| 15. | 9G-7552 | [1] | BEARING | |
| 16. | 9L-6770 | [1] | CAP-DUST | |
| 17. | 9G-7567 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 1L-9048 | [1] | NUT-PLATED JAM (7/16-14-THD) | |
| 19. | 5C-2874 M | [1] | NUT (M5X0.8-THD) | |
| 20. | 7X-0620 | [1] | WASHER-HARD (5.5X13X1.6-MM THK) | |
| 21. | 9X-6001 M | [4] | BOLT (M5X0.8X150-MM) | |
| 22. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 23. | 8T-5360 | [1] | WASHER (12X22.5X2.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7T-0816 | [1] | KIT-FAN (ALTERNATOR AIR) | ||
| (INCLUDES FAN, SUPPORT PLATE, & SPACER) | ||||
| 9G-7559 | [1] | KIT-RELAY TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES SPLICE, NUT, TUBE, PIN TERMINAL, WASHERS, LOCKWASHER, & BUSHING) | ||||
| 9G-7565 | [1] | KIT-REGULATOR TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INCLUDES NUTS, LOCKWASHERS, WASHERS, & BUSHINGS) | ||||
| 9G-7554 | [1] | KIT-TERMINAL GROUND (ALTERNATOR AIR) | ||
| (INCLUDES NUTS & LOCKWASHERS) | ||||
| 9G-7555 | [1] | KIT-OUTPUT TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES NUTS, WASHERS, & BUSHINGS) | ||||
| 9G-7556 | [1] | KIT-CAPACITOR (ALTERNATOR AIR) | ||
| (INCLUDES CAPACITOR, SCREW, & LOCKWASHER) | ||||
| M | METRIC PART | |||
#SEBP49640117
8N-1083: ALTERNATOR GP-CHARGING
8N-1083 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 50-AMPERE
AN ATTACHMENT
S/N C7G1000-UP
24-VOLT, 50-AMPERE
AN ATTACHMENT
For full view, you need register
Parts for your D7G2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP49640118
9G-4574: ALTERNATOR GP-CHARGING
9G-4574 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 35-AMPERE
PART OF 6N-9294 ALTERNATOR GP-CHARGING
S/N C7G1000-UP
24-VOLT, 35-AMPERE
PART OF 6N-9294 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your D7G2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-2793 | [1] | FAN AS (12-BLADE) | |
| 2. | 7T-2790 | [1] | ROTOR AS | |
| 3. | 7T-2794 | [1] | STATOR AS | |
| 4. | 7T-2792 | [1] | FRAME AS | |
| 5. | 7T-2791 | [1] | COIL AS | |
| 6. | 7T-2798 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 7. | 7T-2797 | [1] | COVER | |
| 8. | 7T-2796 | [1] | HOLDER AS-BRUSH | |
| 9. | 7T-2795 | [1] | FRAME AS | |
| 10. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 11. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 12. | 7T-2801 | [1] | CONDENSER | |
| 13. | 7X-0447 | [1] | NUT (7/16-14-THD) | |
| 14. | 2H-3920 | [1] | LOCKWASHER | |
| 15. | 9L-6770 | [1] | CAP-DUST | |
| 16. | 6V-8185 | [1] | NUT (1/4-20-THD) | |
| 17. | 1H-3244 | [1] | LOCKWASHER | |
| 18. | 7T-2802 | [1] | WIRE AS | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7T-2800 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INSULATORS, NUTS, LOCKWASHERS, & WASHERS) | ||||
| 7T-2804 | [1] | KIT-ALTERNATOR TERMINAL (RELAY) | ||
| (INCLUDES WIRE AS, CAP, BOLT, BUSHING, & INSULATOR) | ||||
| 7T-2805 | [1] | KIT-ALTERNATOR TERMINAL (NEGATIVE) | ||
| (INCLUDES INSULATORS, NUTS, WASHERS, & LOCKWASHERS) | ||||
| 7T-2799 | [1] | KIT-BEARING | ||
| (INCLUDES BEARINGS) | ||||
| 7T-2803 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES SCREW ASSEMBLIES & BOLT ASSEMBLIES) | ||||
| 7T-2816 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES PLATE ASSEMBLY, PLATE BOLT ASSEMBLIES, WASHERS, SPACERS, & RING) | ||||
#SEBP49640119
273-3604: BATTERY & WIRING GP
For full view, you need register
Parts for your D7G2 TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-8406 | [1] | CLIP (LOOP) | |
| 2. | 1H-5165 | [3] | CLIP-WIRE | |
| 3. | 1H-5166 | [1] | CLIP | |
| 4. | 2D-7325 | [1] | TEE-PIPE | |
| 5. | 3E-7259 | [1] | SENDER AS-TEMPERATURE (TORQUE CONVERTER OIL) | |
| 4B-2049 | [1] | NUT (10-32-THD) | ||
| 7X-0620 | [1] | WASHER-HARD (5.5X13X1.6-MM THK) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 6. | 4L-7049 | [2] | NUT (9/16-18-THD) | |
| 7. | 6N-5926 | [1] | SENDER AS-TEMPERATURE (COOLANT) | |
| 8. | 6V-0852 | [1] | CAP-DUST | |
| 9. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 10. | 7T-7116 | [1] | BRACKET AS | |
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 11. | 8T-8614 | [1] | RING-LOCK | |
| 12. | 9L-6331 | [1] | BRACKET | |
| 13. | 9W-1581 | [1] | SWITCH AS-NEUTRAL START | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 14. | 9W-5362 | [1] | BRACKET | |
| 15. | 107-0613 | [1] | SWITCH AS-PRESSURE (ENGINE OIL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 16. | 153-5710 | [2] | BATTERY GP (12-VOLT, MAINTENANCE FREE, WET) | |
| 17. | 158-6632 Y | [1] | SWITCH GP-PUSH BUTTON (HORN) | |
| 18. | 174-7875 | [1] | HORN AS (24-VOLT, HIGH TONE) | |
| 19. | 270-7909 | [1] | HARNESS AS-SWITCH | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| 5P-1475 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 20. | 273-2844 | [1] | HARNESS AS-LIGHTING | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9W-0852 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (100-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 21. | 273-3593 | [1] | CABLE AS | |
| 5P-0747 E | CABLE (00-GA, BLACK)(18-CM) | |||
| 9G-0002 | [1] | COVER AS-TERMINAL (RED) | ||
| 9G-0004 | [1] | COVER AS-TERMINAL (RED) | ||
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| (EACH TERMINAL ASSEMBLY INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 22. | 273-3594 | [1] | CABLE AS | |
| 1S-7252 | [2] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(130-CM) | |||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 3S-6050 | [2] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| (EACH INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 23. | 273-3595 | [1] | CABLE AS | |
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0695 E | CONDUIT (352-CM) | |||
| 5P-0761 E | CABLE (00-GA, RED)(377-CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(17-CM) | |||
| 3S-6049 | [2] | TERMINAL AS-BATTERY (POSITIVE) | ||
| (EACH INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 24. | 273-3596 | [1] | CABLE AS | |
| 1S-7252 | [2] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(120-CM) | |||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 25. | 273-3597 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(26-CM) | |||
| 26. | 273-3600 | [1] | HARNESS AS-CHASSIS | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8806 | [2] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [4] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1544 | [1] | PIN-CONNECTOR (8-GA) | ||
| 8N-1545 | [1] | SOCKET-CONNECTOR (8-GA) | ||
| 8N-1548 | [2] | PIN-CONNECTOR (4-GA) | ||
| 8N-1549 | [2] | SOCKET-CONNECTOR (4-GA) | ||
| 186-3735 | [35] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [17] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [19] | PLUG-SEAL | ||
| 9W-0844 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [15] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 009-8708 | [1] | BOOT-TERMINAL | ||
| 114-8843 E | SLEEVE-PLASTIC (225-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 127-5483 | [2] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5484 | [2] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 127-5485 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 2L-8069 | [3] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH CONNECTING KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 27. | 273-3601 | [1] | HARNESS AS-ENGINE | |
| 102-8802 | [5] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1548 | [1] | PIN-CONNECTOR (4-GA) | ||
| 186-3736 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [13] | PLUG-SEAL | ||
| 9W-0844 | [10] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 009-8708 | [1] | BOOT-TERMINAL | ||
| 114-8843 E | SLEEVE-PLASTIC (290-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 9G-4344 | [1] | TERMINAL-RING (4-GA, 1/2-IN SCREW) | ||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH CONNECTING KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 308-8161 | [1] | COVER-TERMINAL | ||
| 28. | 273-3603 | [1] | HARNESS AS-FRONT CHASSIS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [3] | KIT-RECEPTACLE (8-PIN) | ||
| 194-4254 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-0194 | [2] | TERMINAL AS | ||
| 5P-5618 | [2] | TERMINAL-BLADE (10-GA TO 12-GA) | ||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 186-3735 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 9W-0844 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [12] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (160-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 155-2263 | [1] | WEDGE-PLUG LOCK (6-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2265 | [5] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH CONNECTING KIT INCLUDES PLUG AS & WEDGE) | ||||
| 29. | 274-8121 Y | [1] | PANEL GP-FUSE | |
| 30. | 276-3378 | [2] | BRACKET | |
| 31. | 068-4209 | [4] | SCREW (8-32X0.75-IN) | |
| 32. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 33. | 0S-0509 | [3] | BOLT (3/8-16X0.75-IN) | |
| 34. | 0S-1594 | [6] | BOLT (3/8-16X1-IN) | |
| 35. | 0S-1620 | [1] | BOLT (1/2-13X0.75-IN) | |
| 36. | 0S-1624 | [2] | BOLT (5/8-11X1-IN) | |
| 37. | 0T-0102 | [1] | BOLT (3/8-16X0.625-IN) | |
| 38. | 130-5300 | [3] | CLIP | |
| 40. | 174-7876 | [1] | HORN AS (24-VOLT, LOW TONE) | |
| 42. | 1S-0994 | [3] | CLIP (LOOP) | |
| 43. | 1S-0996 | [1] | CLIP | |
| 44. | 4B-4863 | [4] | WASHER (4.7X11X1.2-MM THK) | |
| 45. | 4H-2558 | [3] | GROMMET | |
| 46. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 47. | 4M-0061 | [6] | BOLT (5/16-18X0.75-IN) | |
| 48. | 4P-7428 | [3] | CLIP (LADDER) | |
| 49. | 4P-7429 | [1] | CLIP (LADDER) | |
| 50. | 4P-7581 | [1] | CLIP (LADDER) | |
| 51. | 4P-7582 | [2] | CLIP | |
| 52. | 4P-8134 | [7] | CLIP (LADDER) | |
| 53. | 5P-1075 | [16] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 54. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
| 55. | 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 56. | 6D-5801 | [4] | LOCKNUT (8-32-THD) | |
| 57. | 6H-4005 | [2] | GROMMET | |
| 58. | 6V-3966 | [1] | FITTING AS | |
| 59. | 6V-8189 | [3] | NUT (5/16-18-THD) | |
| 60. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 61. | 7K-1181 | [59] | STRAP-CABLE | |
| 62. | 7S-1912 | [1] | CLIP | |
| 63. | 8B-2664 | [1] | BUSHING-REDUCER | |
| 64. | 8M-3107 | [1] | COVER | |
| 65. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) | |
| 66. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 67. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 68. | 8T-4171 M | [4] | BOLT (M6X1X12-MM) | |
| 69. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 70. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 71. | 8T-4224 | [9] | WASHER-HARD (8.8X16X2-MM THK) | |
| 72. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 73. | 8T-9383 | [1] | BOLT (1/2-13X0.75-IN) | |
| 75. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 76. | 312-3953 | [1] | HARNESS AS-MOTOR | |
| 8N-1544 | [1] | PIN-CONNECTOR (8-GA) | ||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (30-CM) | |||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 9G-4344 | [1] | TERMINAL-RING (4-GA, 1/2-IN SCREW) | ||
| 2L-8049 | [1] | TERMINAL-RING (6-GA, NO. 10 SCREW) | ||
| (OR) | ||||
| 2L-8057 | [1] | TERMINAL-RING (8-GA, NO. 10 SCREW) | ||
| 77. | 8H-8648 | [1] | PLATE-INSTRUCTION (DISCONNECT SWITCH) | |
| 78. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
