AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

274-1154 CONTROL GP-HYDRAULIC HAND -BULLDOZER LIFT S/N C7G1000-UP PART OF 268-0768 HYDRAULIC AR-1 VALVE AN ATTACHMENT D7G2


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP
COVER GP
PANEL GP
DOOR GP

TRACK-TYPE TRACTOR D7G2 TRACK-TYPE TRACTOR C7G
 D7G2 TRACK-TYPE TRACTOR C7G01000-UP (MACHINE) POWERED BY 3306 Engine SEBP4964 D7G2 C7G   (2004)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
267-9056 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
274-1153 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
274-1154 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
274-1155 CONTROL GP-HYDRAULIC HAND
 

#SEBP49640330
 

274-1154: CONTROL GP-HYDRAULIC HAND

274-1154 CONTROL GP-HYDRAULIC HAND -BULLDOZER LIFT
S/N C7G1000-UP
PART OF 268-0768 HYDRAULIC AR-1 VALVE
AN ATTACHMENT
i02548071 SEBP4964
2741154 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D7G2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1482 [1] SHAFT AS  
2. 8E-6894 [1] HANDLE (BULLDOZER CONTROL)  
3. 8E-7364 [1] BOOT  
4. 8G-4657 [1] YOKE  
5. 8T-0798 [4] BEARING-ROLLER  
6. 091-1745 B [2] WASHER (16.6X24X1.2-MM THK)  
7. 133-8057 [1] FILM-INSTRUCTION (BULLDOZER CONTROL)  
8. 271-0675 [1] SUPPORT AS  
9. 271-2576 [1] SHAFT AS  
10. 271-2661 [1] ROD AS  
  271-2662 [1] ROD  
  1M-1341 [1] END-YOKE ROD  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  8X-6167 [1] ROD END  
11. 271-2665 [1] ROD AS  
  271-2666 [1] ROD  
  5J-5315 [2] ROD END  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
12. 272-2729 [1] PLATE  
13. 273-0405 [1] LEVER AS  
14. 274-1772 [1] SUPPORT AS  
15. 275-1866 [1] ROD  
16. 260-7268 [4] SPACER (18X30X25-MM THK)  
17. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
18. 3B-4615 [2] PIN-COTTER  
19. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
20. 6B-1225 [1] PIN  
21. 7X-3374 [2] NUT-FULL (1/2-20-THD)  
22. 8B-1419 [1] PIN-CLEVIS  
23. 8T-0741 [4] SEAL-LIP TYPE  
24. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
26. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
27. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
28. 8T-4196 M [10] BOLT (M10X1.5X35-MM)  
29. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49640331
 

274-1155: CONTROL GP-HYDRAULIC HAND

274-1155 CONTROL GP-HYDRAULIC HAND -BULLDOZER LIFT, RIPPER
S/N C7G1000-UP
PART OF 268-0770 HYDRAULIC AR-2 VALVE
AN ATTACHMENT
i02548754 SEBP4964
2741155 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D7G2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 260-7268 [2] SPACER (18X30X25-MM THK)  
2. 3W-1482 [2] SHAFT AS  
3. 8E-6894 [1] HANDLE (BULLDOZER)  
4. 8E-7364 [2] BOOT  
5. 8G-4657 [2] YOKE  
6. 8T-0798 [8] BEARING-ROLLER  
7. 091-1745 B [2] WASHER (16.6X24X1.2-MM THK)  
8. 133-8056 [1] FILM-INSTRUCTION (BULLDOZER, RIPPER)  
9. 228-0952 [1] PLATE AS  
10. 271-0675 [1] SUPPORT AS  
11. 271-2576 [1] SHAFT AS  
12. 271-2661 [1] ROD AS  
  8X-6167 [1] ROD END  
  1M-1341 [1] END-YOKE ROD  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
13. 271-2663 [1] ROD AS  
  8X-6167 [1] ROD END  
  2K-0400 [1] END-YOKE ROD  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
14. 271-2665 [1] ROD AS  
  271-2662 [1] ROD  
  5J-5315 [2] ROD END  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
15. 272-2729 [2] PLATE  
16. 273-0405 [1] LEVER AS  
17. 274-1772 [1] SUPPORT AS  
18. 275-1866 [1] ROD  
19. 275-1867 [1] ROD  
20. 293-9677 [1] ROD AS  
  4D-4064 [2] ROD END (3/8-24-THD)  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
21. 293-9678 [1] LEVER AS  
22. 2A-1736 [1] HANDLE (RIPPER)  
23. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
24. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
25. 3B-4615 [4] PIN-COTTER  
26. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
27. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
28. 6B-1225 [2] PIN  
29. 7X-3374 [3] NUT-FULL (1/2-20-THD)  
30. 8B-1419 [2] PIN-CLEVIS  
31. 8T-0741 [8] SEAL-LIP TYPE  
32. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
34. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
35. 8T-4191 M [8] BOLT (M10X1.5X16-MM)  
36. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
37. 8T-4196 M [10] BOLT (M10X1.5X35-MM)  
38. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49640332
 

270-5420: CONTROL GP-TRANSMISSION

270-5420 CONTROL GP-TRANSMISSION
S/N C7G1000-UP
PART OF 273-3624 POWER TRAIN AR
i02544324 SEBP4964
2705420 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your D7G2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-7167 [1] SPACER (0.502X0.9975X1.01-IN)  
2. 2P-3980 [1] LEVER  
3. 3P-7649 [1] LEVER  
4. 4D-4064 [4] ROD END (3/8-24-THD)  
5. 4M-0496 [1] BOLT (3/8-16X1.75-IN)  
6. 4M-1743 [1] LEVER-CONTROL  
7. 4M-6013 [1] WASHER (22.5X45X5-MM THK)  
8. 5Y-1628 [1] SLEEVE  
9. 6V-8801 [6] NUT (3/8-16-THD)  
10. 7F-0192 [1] BOLT (3/8-16X2-IN)  
11. 7M-0706 [1] KNOB (TRANSMISSION CONTROL)  
12. 7P-4190 [2] BEARING-ROLLER  
13. 8B-4037 [1] WASHER (0.766X1.75X0.083-IN THK)  
14. 9S-9365 [1] BRACKET  
15. 270-5422 [1] LEVER AS  
  270-5423 [1] LEVER AS  
15A. 5H-3895 [1] BUSHING-TERMINAL  
16. 270-6143 [1] ROD  
17. 270-6144 [1] ROD  
18. 270-6146 [1] SHAFT AS  
19. 0S-1585 [3] BOLT (1/2-13X1.5-IN)  
20. 1A-1460 [1] BOLT (1/2-13X2-IN)  
21. 1B-8706 [3] KEY-WOODRUFF  
22. 1K-0485 [2] WASHER (19.4X34.9X2.5-MM THK)  
23. 1K-6872 [1] LOCKNUT (1/2-13-THD)  
24. 1L-9062 [1] BOLT (3/8-24X1.5-IN)  
25. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 5S-7382 [3] BOLT (3/8-16X1.375-IN)  
27. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
28. 7X-0288 [1] BOLT (3/8-16X1.625-IN)  
29. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
30. 9L-7712 [4] NUT (3/8-24-THD)  
 

#SEBP49640333
 

274-9754: COVER GP-ACCESS

274-9754 COVER GP-ACCESS -SEAT SUPPORT
S/N C7G1000-UP
PART OF 273-9223 SUPPORT GP-SEAT
i02546153 SEBP4964
2749754 COVER GP-ACCESS Parts scheme
  For full view, you need register

Parts for your D7G2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [2] WASHER (10.5X30X3-MM THK)  
2. 4B-4909 [2] SPRING  
3. 246-2641 [1] PADLOCK GP  
  5P-8500 [1] KEY  
4. 8T-9496 [4] LOCKNUT (9/16-18-THD)  
5. 8Y-4000 [2] LATCH AS (T-BAR, COMPARTMENT)  
6. 132-4354 [2] SPACER (10.5X19X26.5-MM THK)  
7. 178-2593 [2] BUMPER  
8. 274-9642 [1] COVER AS (RH)  
9. 274-9738 [1] COVER AS (LH)  
10. 287-8488 [2] ROD AS  
11. 2K-5986 [2] PIN-SPRING  
12. 3V-0613 [6] BUMPER  
13. 3W-9207 [2] GUIDE  
14. 3W-9208 [2] PAWL  
15. 5C-7261 M [2] NUT (M8X1.25-THD)  
16. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
17. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
18. 7X-7729 [22] WASHER (11X25X3-MM THK)  
19. 8C-8585 M [12] SCREW-BUTTON HEAD (M10X1.5X20-MM)  
20. 8E-4832 [2] STRIKER  
21. 8T-4133 M [4] NUT (M10X1.5-THD)  
22. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
23. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
24. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
25. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
26. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
27. 9W-8940 [2] PLATE  
  M   METRIC PART
 

#SEBP49640334
 

273-9227: DASH GP

273-9227 DASH GP
S/N C7G1000-UP
PART OF 275-2902 CHASSIS AR
i02546663 SEBP4964
2739227 DASH GP Parts scheme
  For full view, you need register

Parts for your D7G2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0998 [2] PLUG-SEAL  
2. 6T-0988 [1] FILTER ELEMENT-CAB AIR (STANDARD EFFICIENCY)(FRESH AIR, UPPER)  
    -OR-
  175-2831 [1] FILTER ELEMENT-CAB AIR (ULTRA HIGH EFFICIENCY)(ACTIVATED CHARCOAL)  
3. 6V-1790 [4] PLUG-BUTTON  
4. 7T-6299 [1] GROMMET  
5. 8P-3595 [12] BUSHING-TERMINAL  
6. 8Y-6388 [3] LOUVER AS-VENT  
7. 273-5924 [2] KNOB  
8. 198-7281 Y [1] BLOWER GP-CAB  
9. 224-9072 [2] KNOB  
10. 275-9678 [1] FILTER ELEMENT AS-CAB AIR (CAB AIR, LOWER)  
11. 275-9688 [1] DASH AS  
12. 275-9707 [1] COVER AS  
13. 275-9709 [2] RUBBER  
14. 275-9710 [2] PLATE  
15. 275-9712 [6] PLATE  
16. 288-1370 [1] COVER  
17. 288-5135 Y [1] LINER GP-SOUND SUPPRESSION  
18. 294-0190 [1] PLATE  
19. 294-0192 [1] SHEET-RUBBER  
20. 111-5147 [6] SCREW-MACHINE (6-32X0.625-IN)  
21. 174-8131 M [4] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
22. 7D-6922 [6] LOCKNUT (6-32-THD)  
23. 7X-7729 [14] WASHER (11X25X3-MM THK)  
24. 8T-4136 M [14] BOLT (M10X1.5X25-MM)  
25. 8T-4194 M [6] BOLT (M12X1.75X50-MM)  
26. 7D-8431 [2] RING-RETAINING  
27. 9R-5616 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49640335
 

308-4669: DASH GP

308-4669 DASH GP
S/N C7G1000-UP
PART OF 308-5367 CANOPY AR-NON-ROPS, 308-0173 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02757707 SEBP4964
3084669 DASH GP Parts scheme
  For full view, you need register

Parts for your D7G2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-3595 [12] BUSHING-TERMINAL  
2. 275-9712 [6] PLATE  
3. 294-0190 [1] PLATE  
4. 294-0192 [1] SHEET-RUBBER  
5. 308-4670 [1] DASH AS  
6. 174-8131 M [4] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
7. 8T-4194 M [6] BOLT (M12X1.75X50-MM)  
  M   METRIC PART
 

#SEBP49640336
 

274-6489: DOOR GP-CAB

274-6489 DOOR GP-CAB -RH
S/N C7G1000-UP
PART OF 306-6657 CAB GP-ENCLOSED ROPS, 273-9220, 308-5521 CAB GP-NON-ROPS
AN ATTACHMENT
i02555002 SEBP4964
2746489 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D7G2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7636 [2] PIN AS-SPRING  
2. 172-2383 [1] LINK AS  
  6V-8185 [1] NUT (1/4-20-THD)  
  108-5471 [1] CLEVIS  
3. 178-2593 [1] BUMPER  
4. 180-3145 [1] LATCH AS-ROTARY  
5. 200-7836 [1] HANDLE AS (PULL)  
6. 213-4771 [1] LINKAGE AS  
7. 274-3376 [1] GLASS (DOOR)  
8. 274-6490 [1] STRIKER  
9. 274-6491 [1] FRAME AS-DOOR  
11. 5C-7261 M [5] NUT (M8X1.25-THD)  
12. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6V-7357 M [2] BOLT (M6X1X25-MM)  
14. 7X-7729 [7] WASHER (11X25X3-MM THK)  
15. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
16. 8T-4138 M [3] BOLT (M6X1X20-MM)  
17. 8T-4181 M [4] BOLT (M6X1X20-MM)  
18. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
19. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
20. 3E-3805 E SEAL (398-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49640337
 

274-6513: DOOR GP-CAB

274-6513 DOOR GP-CAB -LH
S/N C7G1000-UP
PART OF 306-6657 CAB GP-ENCLOSED ROPS, 273-9220, 308-5521 CAB GP-NON-ROPS
AN ATTACHMENT
i02555134 SEBP4964
2746513 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D7G2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7636 [2] PIN AS-SPRING  
2. 172-2383 [1] LINK AS  
  6V-8185 [1] NUT (1/4-20-THD)  
  108-5471 [1] CLEVIS  
3. 178-2593 [1] BUMPER  
4. 180-3146 [1] LATCH AS (ROTARY)  
5. 200-7836 [1] HANDLE AS (PULL)  
6. 213-4772 [1] LINKAGE AS  
7. 274-3389 [1] GLASS (DOOR)  
8. 274-6490 [1] STRIKER  
9. 274-6514 [1] FRAME AS-DOOR  
11. 5C-7261 M [5] NUT (M8X1.25-THD)  
12. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6V-7357 M [2] BOLT (M6X1X25-MM)  
14. 7X-7729 [7] WASHER (11X25X3-MM THK)  
15. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
16. 8T-4138 M [3] BOLT (M6X1X20-MM)  
17. 8T-4181 M [4] BOLT (M6X1X20-MM)  
18. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
19. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
20. 3E-3805 E SEAL (398-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49640338
 

308-5449: DOOR GP-CAB

308-5449 DOOR GP-CAB -RH
S/N C7G1000-UP
PART OF 308-5527 DOOR GP-CAB
AN ATTACHMENT
i02758780 SEBP4964
3085449 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D7G2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-0873 [1] SPRING (LATCH)  
2. 180-3145 [1] LATCH AS-ROTARY  
3. 308-5468 [1] DOOR AS-CAB (RH)  
4. 310-4246 [1] PLATE  
5. 1S-4244 [1] PIN (9.4-MM OD)  
6. 3B-4615 [1] PIN-COTTER  
7. 8T-4181 M [4] BOLT (M6X1X20-MM)  
8. 118-7987 E SEAL (132-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49640339
 

308-5450: DOOR GP-CAB

308-5450 DOOR GP-CAB -LH
S/N C7G1000-UP
PART OF 308-5527 DOOR GP-CAB
AN ATTACHMENT
i02758781 SEBP4964
3085450 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D7G2 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-0873 [1] SPRING (LATCH)  
2. 180-3146 [1] LATCH AS (ROTARY)  
3. 308-5486 [1] DOOR AS-CAB (LH)  
4. 310-4246 [1] PLATE  
5. 1S-4244 [1] PIN (9.4-MM OD)  
6. 3B-4615 [1] PIN-COTTER  
7. 8T-4181 M [4] BOLT (M6X1X20-MM)  
8. 118-7987 E SEAL (132-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D7G2 :

CONTROL GP-HYDRAULIC HAND
274-1153 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
267-9056 CONTROL GP-HYDRAULIC HAND
CONTROL GP-DECELERATOR
223-7139 CONTROL GP-DECELERATOR
CONDENSER GP-REFRIGERANT
304-7249 CONDENSER GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
275-9743 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
292-9305 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
271-2533 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
106-5122 COMPRESSOR GP-REFRIGERANT
CONTROL GP-HYDRAULIC HAND
274-1155 CONTROL GP-HYDRAULIC HAND
CONTROL GP-TRANSMISSION
270-5420 CONTROL GP-TRANSMISSION
COVER GP-ACCESS
274-9754 COVER GP-ACCESS
DASH GP
273-9227 DASH GP
DASH GP
308-4669 DASH GP
DOOR GP-CAB
274-6489 DOOR GP-CAB
DOOR GP-CAB
274-6513 DOOR GP-CAB
DOOR GP-CAB
308-5449 DOOR GP-CAB

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.