AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

329-7800 CONTROL GP-HYDRAULIC HAND -BULLDOZER LIFT S/N C6G1000-UP PART OF 329-7810 HYDRAULIC AR-1 VALVE AN ATTACHMENT D6G2 XL


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP
PANEL GP
DOOR GP

TRACK-TYPE TRACTOR D6G2 XL TRACK-TYPE TRACTOR C6G
 D6G2 XL TRACK-TYPE TRACTOR C6G01000-UP (MACHINE) POWERED BY 3306 Engine SEBP4965 D6G2 XL C6G   (2006)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
276-6627 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
276-9970 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
281-0360 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
288-3460 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
329-7799 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
329-7800 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
329-7801 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
329-7802 CONTROL GP-HYDRAULIC HAND
 

#SEBP49650350
 

329-7800: CONTROL GP-HYDRAULIC HAND

329-7800 CONTROL GP-HYDRAULIC HAND -BULLDOZER LIFT
S/N C6G1000-UP
PART OF 329-7810 HYDRAULIC AR-1 VALVE
AN ATTACHMENT
i03631326 SEBP4965
3297800 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
2. 3B-4615 [1] PIN-COTTER  
3. 3W-1482 [1] SHAFT AS  
4. 8E-5962 [1] PLATE  
5. 8E-6894 [1] HANDLE (BULLDOZER CONTROL)  
6. 8E-7364 [1] BOOT  
7. 8G-4657 [1] YOKE  
8. 8T-0798 [4] BEARING-ROLLER  
9. 091-1745 B [2] WASHER (16.6X24X1.2-MM THK)  
10. 133-8057 [1] FILM-INSTRUCTION (BULLDOZER CONTROL)  
11. 276-6642 [1] SUPPORT AS  
12. 276-6643 [1] PLATE  
13. 276-6653 [1] SHAFT AS  
14. 281-0359 [1] SUPPORT AS  
15. 330-7588 [1] LEVER AS  
16. 330-7590 [1] ROD AS  
  5J-5315 [2] ROD END  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  276-7809 [1] ROD  
17. 330-7591 [1] HANDLE  
18. 330-7592 [1] ROD AS  
  1M-1341 [1] END-YOKE ROD  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  140-9637 [1] END-YOKE ROD  
  330-7593 [1] ROD  
19. 095-0845 [1] PIN-COTTER  
20. 1B-0676 [1] PIN  
21. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
22. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
23. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
24. 5S-7382 [4] BOLT (3/8-16X1.375-IN)  
25. 6B-6684 [2] NUT-FULL (1/2-20-THD)  
26. 8K-1255 [1] PIN  
27. 8T-0741 [4] SEAL-LIP TYPE  
28. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
30. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49650351
 

329-7801: CONTROL GP-HYDRAULIC HAND

329-7801 CONTROL GP-HYDRAULIC HAND
S/N C6G1000-UP
PART OF 329-7811 HYDRAULIC AR-2 VALVE
AN ATTACHMENT
i03631707 SEBP4965
3297801 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
2. 3B-4615 [5] PIN-COTTER  
3. 3W-1482 [1] SHAFT AS  
4. 5P-0532 [1] FILM-INSTRUCTION (RIPPER CONTROL)  
5. 5P-9209 [4] BEARING AS-NEEDLE  
6. 8E-5962 [2] PLATE  
7. 8E-6894 [1] HANDLE (BULLDOZER CONTROL)  
8. 8E-7364 [2] BOOT  
9. 8G-4657 [1] YOKE  
10. 8T-0798 [4] BEARING-ROLLER  
11. 091-1745 B [2] WASHER (16.6X24X1.2-MM THK)  
12. 133-8057 [1] FILM-INSTRUCTION (BULLDOZER CONTROL)  
13. 211-4634 [1] ROD-CONTROL  
14. 276-6642 [1] SUPPORT AS  
15. 276-6643 [1] PLATE  
16. 276-6653 [1] SHAFT AS  
17. 276-6662 [1] BRACKET AS  
18. 276-6666 [1] SHAFT AS  
19. 276-6668 [1] LEVER AS  
20. 276-6673 [2] LINK  
21. 277-4155 [1] LEVER AS  
22. 281-0359 [1] SUPPORT AS  
23. 330-7588 [1] LEVER AS  
24. 330-7590 [1] ROD AS  
  5J-5315 [2] ROD END  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  276-7809 [1] ROD  
25. 330-7591 [1] HANDLE  
26. 330-7592 [1] ROD AS  
  1M-1341 [1] END-YOKE ROD  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  140-9637 [1] END-YOKE ROD  
  330-7593 [1] ROD  
27. 330-7594 [1] ROD AS  
  4D-4064 [1] ROD END (3/8-24-THD)  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  140-9637 [1] END-YOKE ROD  
  330-7595 [1] ROD  
28. 095-0845 [2] PIN-COTTER  
29. 1B-0676 [3] PIN  
30. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
31. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
32. 5P-1075 [10] WASHER-HARD (10.2X22.5X3-MM THK)  
33. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
34. 5S-7382 [11] BOLT (3/8-16X1.375-IN)  
35. 6B-6684 [2] NUT-FULL (1/2-20-THD)  
36. 8K-1255 [2] PIN  
37. 8T-0741 [4] SEAL-LIP TYPE  
38. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
40. 8T-4229 [1] KNOB (BALL)(RIPPER CONTROL)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
43. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
44. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49650352
 

329-7802: CONTROL GP-HYDRAULIC HAND

329-7802 CONTROL GP-HYDRAULIC HAND -BULLDOZER LIFT, TILT, RIPPER
S/N C6G1000-UP
PART OF 329-7812 HYDRAULIC AR-3 VALVE
AN ATTACHMENT
i03631731 SEBP4965
3297802 CONTROL GP-HYDRAULIC HAND Parts scheme 3297802 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-8704 [1] KEY-WOODRUFF  
2. 2L-6267 [3] LOCKNUT (3/8-24-THD)  
3. 3B-4615 [7] PIN-COTTER  
4. 3W-1482 [1] SHAFT AS  
5. 5P-0532 [1] FILM-INSTRUCTION (RIPPER CONTROL)  
6. 5P-9209 [6] BEARING AS-NEEDLE  
7. 8E-5962 [2] PLATE  
8. 8E-6894 [1] HANDLE (BULLDOZER CONTROL)  
9. 8E-7364 [2] BOOT  
10. 8G-4657 [1] YOKE  
11. 8G-4659 [1] SHAFT AS  
12. 8T-0798 [8] BEARING-ROLLER  
13. 091-1745 B [6] WASHER (16.6X24X1.2-MM THK)  
14. 102-2913 [1] FILM-INSTRUCTION (BULLDOZER CONTROL)  
15. 211-4634 [1] ROD-CONTROL  
16. 276-6630 [1] LEVER AS  
17. 276-6635 [1] SHAFT AS  
18. 276-6638 [1] LEVER AS  
19. 276-6642 [1] SUPPORT AS  
20. 276-6643 [1] PLATE  
21. 276-6646 [1] LEVER AS  
22. 276-6653 [1] SHAFT AS  
23. 276-6656 [1] ROD AS  
  4D-4064 [2] ROD END (3/8-24-THD)  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  276-6657 [1] ROD  
24. 276-6662 [1] BRACKET AS  
25. 276-6666 [1] SHAFT AS  
26. 276-6668 [1] LEVER AS  
27. 276-6673 [2] LINK  
28. 277-4155 [1] LEVER AS  
29. 277-8113 [1] SUPPORT AS  
30. 330-7588 [1] LEVER AS  
31. 330-7589 [1] ROD AS  
  4D-4064 [1] ROD END (3/8-24-THD)  
  5J-5315 [1] ROD END  
  4K-2877 [1] STUD  
32. 330-7590 [1] ROD AS  
  5J-5315 [2] ROD END  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  276-7809 [1] ROD  
33. 330-7591 [1] HANDLE  
34. 330-7592 [2] ROD AS  
    (EACH INCLUDES)
  1M-1341 [1] END-YOKE ROD  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  140-9637 [1] END-YOKE ROD  
  330-7593 [1] ROD  
35. 330-7594 [1] ROD AS  
  4D-4064 [1] ROD END (3/8-24-THD)  
  6V-8183 [2] NUT-FULL (3/8-24-THD)  
  140-9637 [1] END-YOKE ROD  
  330-7595 [1] ROD  
36. 095-0845 [3] PIN-COTTER  
37. 1B-0676 [4] PIN  
38. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
39. 4L-9337 [3] BOLT (3/8-16X1.5-IN)  
40. 5P-1075 [10] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
42. 5S-7382 [14] BOLT (3/8-16X1.375-IN)  
43. 6B-6684 [2] NUT-FULL (1/2-20-THD)  
44. 6V-8801 [1] NUT (3/8-16-THD)  
45. 8K-1255 [3] PIN  
46. 8T-0741 [8] SEAL-LIP TYPE  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
49. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
50. 8T-4229 [1] KNOB (BALL)(RIPPER CONTROL)  
51. 8T-4244 M [1] NUT (M12X1.75-THD)  
52. 8T-4896 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
53. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
54. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49650353
 

274-8987: CONTROL GP-TRANSMISSION

274-8987 CONTROL GP-TRANSMISSION
S/N C6G1000-UP
PART OF 277-4192 POWER TRAIN AR
i02531110 SEBP4965
2748987 CONTROL GP-TRANSMISSION Parts scheme 2748987 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4203 [1] NUT-FULL (3/8-24-THD)  
3. 4D-4064 [6] ROD END (3/8-24-THD)  
4. 4M-0496 [4] BOLT (3/8-16X1.75-IN)  
5. 5B-9079 [6] NUT-JAM (3/8-24-THD)  
6. 5Y-1628 [1] SLEEVE  
7. 6D-5974 [3] BEARING-ROLLER  
8. 6V-8187 [4] NUT (1/4-28-THD)  
9. 6V-8801 [9] NUT (3/8-16-THD)  
10. 7M-0706 [1] KNOB (TRANSMISSION CONTROL)  
11. 7P-4190 [2] BEARING-ROLLER  
12. 8B-4037 [2] WASHER (0.766X1.75X0.083-IN THK)  
13. 8T-1177 [2] BEARING-ROLLER  
14. 9M-1385 [1] LEVER  
15. 9M-1386 [1] LEVER  
16. 9S-1385 [1] SPACER (1.156X1.75X0.25-IN THK)  
17. 9W-4565 [1] BOOT  
18. 274-8986 [1] PLATE AS  
19. 274-8991 [1] BRACKET AS  
20. 274-8995 [1] HOUSING AS  
21. 274-9605 [1] LEVER AS  
22. 274-9606 [1] SHAFT  
23. 274-9609 [1] LEVER AS  
24. 274-9610 [1] BELL AS  
25. 274-9612 [1] SHAFT  
26. 274-9613 [1] ROD  
27. 274-9614 [1] BELL AS  
28. 274-9620 [1] SHAFT AS  
29. 274-9624 [1] BELL AS  
30. 274-9634 [1] LEVER AS  
31. 274-9635 [1] SHAFT AS  
32. 274-9641 [1] LEVER AS  
33. 274-9646 [1] ROD  
34. 274-9648 [1] ROD  
35. 276-1341 [2] CABLE AS  
36. 287-1783 [1] SPACER (19.1X30X20.5-MM THK)  
37. 069-2508 [2] END-YOKE ROD  
38. 091-9915 [3] WASHER-HARD (20X35X1.6-MM THK)  
39. 0S-1585 [3] BOLT (1/2-13X1.5-IN)  
40. 1A-1460 [1] BOLT (1/2-13X2-IN)  
41. 1B-0676 [4] PIN  
42. 1B-8706 [2] KEY-WOODRUFF  
43. 1K-6872 [1] LOCKNUT (1/2-13-THD)  
44. 1L-9062 [1] BOLT (3/8-24X1.5-IN)  
45. 2D-2285 [1] BOLT (3/8-16X1.75-IN)  
46. 2K-4973 [3] LOCKNUT (3/8-16-THD)  
47. 3B-4615 [4] PIN-COTTER  
48. 5B-0639 [1] WASHER (19.5X38.1X6-MM THK)  
49. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
50. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
51. 5P-6438 [2] END-YOKE ROD  
52. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
53. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
54. 6F-6977 [4] WASHER (20.6X44.4X3-MM THK)  
55. 1H-1200 [5] PIN-SPRING  
56. 6V-8823 [2] WASHER-HARD (19.25X27X2-MM THK)  
57. 8F-7702 [2] SEAL-LIP TYPE  
58. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
59. 8T-7950 M [3] BOLT (M10X1.5X180-MM)  
60. 8T-9101 [1] BOLT (3/8-16X2.75-IN)  
61. 8T-9375 [1] BOLT (3/8-16X1.75-IN)  
62. 2M-7167 [1] SPACER (0.502X0.9975X1.01-IN)  
  M   METRIC PART
 

#SEBP49650354
 

276-1391: DASH GP

276-1391 DASH GP -CAB
S/N C6G1000-UP
PART OF 277-2428 CHASSIS AR
i02527569 SEBP4965
2761391 DASH GP Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0998 [2] PLUG-SEAL  
2. 6T-0988 [1] FILTER ELEMENT-CAB AIR (STANDARD EFFICIENCY)  
    -OR-
  175-2831 [1] FILTER ELEMENT-CAB AIR (ULTRA HIGH EFFICIENCY)  
3. 6T-4556 [2] COVER  
4. 6T-4557 [2] GASKET  
5. 6V-1790 [4] PLUG-BUTTON  
6. 7D-8431 [2] RING-RETAINING  
7. 7T-6299 [1] GROMMET  
8. 8Y-6388 [3] LOUVER AS-VENT  
9. 198-7281 Y [1] BLOWER GP-CAB  
10. 224-9072 [2] KNOB  
11. 273-5924 [2] KNOB  
12. 274-3316 [1] DASH AS  
13. 275-9678 [1] FILTER ELEMENT AS-CAB AIR (LOWER)  
14. 276-1392 [1] BOX AS  
  [1] COVER  
15. 288-1370 [1] COVER  
16. 288-3948 Y [1] LINER GP-CAB  
17. 294-0190 [1] PLATE  
18. 294-0192 [1] SHEET-RUBBER  
19. 111-5147 [6] SCREW-MACHINE (6-32X0.625-IN)  
20. 174-8131 M [4] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
21. 7D-6922 [6] LOCKNUT (6-32-THD)  
22. 7X-7729 [6] WASHER (11X25X3-MM THK)  
23. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4136 M [14] BOLT (M10X1.5X25-MM)  
25. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
27. 9R-5616 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49650355
 

308-3613: DASH GP

308-3613 DASH GP -CANOPY
S/N C6G1000-UP
PART OF 308-5366 CANOPY AR-NON-ROPS, 308-0176 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i02888769 SEBP4965
3083613 DASH GP Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 294-0190 [1] PLATE  
2. 294-0192 [1] SHEET-RUBBER  
3. 308-3614 [1] DASH AS  
4. 174-8131 M [4] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
5. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
 

#SEBP49650356
 

274-3290: DOOR GP-CAB

274-3290 DOOR GP-CAB -RH
S/N C6G1000-UP
PART OF 274-3285 CAB GP-NON-ROPS
AN ATTACHMENT
i02534152 SEBP4965
2743290 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7636 [2] PIN AS-SPRING  
2. 172-2383 [1] LINK AS  
2A. 6V-8185 [1] NUT (1/4-20-THD)  
2B. 108-5471 [1] CLEVIS  
3. 178-2593 [1] BUMPER  
4. 180-3129 [1] STRIKER  
5. 180-3145 [1] LATCH AS-ROTARY  
6. 200-7836 [1] HANDLE AS (PULL)  
7. 213-4771 [1] LINKAGE AS  
8. 274-3324 [1] FRAME AS-DOOR (RH)  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
9. 274-3376 [1] GLASS (DOOR)  
11. 5C-7261 M [5] NUT (M8X1.25-THD)  
12. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6V-7357 M [2] BOLT (M6X1X25-MM)  
14. 7X-7729 [7] WASHER (11X25X3-MM THK)  
15. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
16. 8T-4138 M [3] BOLT (M6X1X20-MM)  
17. 8T-4181 M [4] BOLT (M6X1X20-MM)  
18. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
19. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
20. 3E-3805 E SEAL (398-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49650357
 

274-3291: DOOR GP-CAB

274-3291 DOOR GP-CAB -LH
S/N C6G1000-UP
PART OF 274-3285 CAB GP-NON-ROPS
AN ATTACHMENT
i02534170 SEBP4965
2743291 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7636 [2] PIN AS-SPRING  
2. 172-2383 [1] LINK AS  
2A. 6V-8185 [1] NUT (1/4-20-THD)  
2B. 108-5471 [1] CLEVIS  
3. 178-2593 [1] BUMPER  
4. 180-3129 [1] STRIKER  
5. 180-3146 [1] LATCH AS (ROTARY)  
6. 200-7836 [1] HANDLE AS (PULL)  
7. 213-4772 [1] LINKAGE AS  
8. 274-3377 [1] FRAME AS-DOOR (LH)  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
9. 274-3389 [1] GLASS (DOOR)  
11. 5C-7261 M [5] NUT (M8X1.25-THD)  
12. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 6V-7357 M [2] BOLT (M6X1X25-MM)  
14. 7X-7729 [7] WASHER (11X25X3-MM THK)  
15. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
16. 8T-4138 M [3] BOLT (M6X1X20-MM)  
17. 8T-4181 M [4] BOLT (M6X1X20-MM)  
18. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
19. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
20. 3E-3805 E SEAL (398-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49650358
 

308-5449: DOOR GP-CAB

308-5449 DOOR GP-CAB -RH
S/N C6G1000-UP
PART OF 308-5446 GUARD GP-CAB
AN ATTACHMENT
i02758780 SEBP4965
3085449 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-0873 [1] SPRING (LATCH)  
2. 180-3145 [1] LATCH AS-ROTARY  
3. 308-5468 [1] DOOR AS-CAB (RH)  
4. 310-4246 [1] PLATE  
5. 1S-4244 [1] PIN (9.4-MM OD)  
6. 3B-4615 [1] PIN-COTTER  
7. 8T-4181 M [4] BOLT (M6X1X20-MM)  
8. 118-7987 E SEAL (132-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49650359
 

308-5450: DOOR GP-CAB

308-5450 DOOR GP-CAB -LH
S/N C6G1000-UP
PART OF 308-5446 GUARD GP-CAB
AN ATTACHMENT
i02758781 SEBP4965
3085450 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8G-0873 [1] SPRING (LATCH)  
2. 180-3146 [1] LATCH AS (ROTARY)  
3. 308-5486 [1] DOOR AS-CAB (LH)  
4. 310-4246 [1] PLATE  
5. 1S-4244 [1] PIN (9.4-MM OD)  
6. 3B-4615 [1] PIN-COTTER  
7. 8T-4181 M [4] BOLT (M6X1X20-MM)  
8. 118-7987 E SEAL (132-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D6G2 XL :

CONTROL GP-HYDRAULIC HAND
329-7799 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
288-3460 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
281-0360 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
276-9970 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
276-6627 CONTROL GP-HYDRAULIC HAND
CONTROL GP-DECELERATOR
223-7139 CONTROL GP-DECELERATOR
CONDENSER GP-REFRIGERANT
304-7249 CONDENSER GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
275-9743 CONDENSER & MTG GP-REFRIGERANT
CONTROL GP-HYDRAULIC HAND
329-7801 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
329-7802 CONTROL GP-HYDRAULIC HAND
CONTROL GP-TRANSMISSION
274-8987 CONTROL GP-TRANSMISSION
DASH GP
276-1391 DASH GP
DASH GP
308-3613 DASH GP
DOOR GP-CAB
274-3290 DOOR GP-CAB
DOOR GP-CAB
274-3291 DOOR GP-CAB
DOOR GP-CAB
308-5449 DOOR GP-CAB

Truck sale:

2010 CAT D6G2 XL
USD $60,000 
2010 CAT D6G2 XL

Bedrock Machinery
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.