AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

226-2126 BLADE GP-STRAIGHT S/N S6G1-UP PART OF 223-6599, 281-6879, 282-5953, 283-5386 BULLDOZER AR-STRAIGHT AN ATTACHMENT D6G2 XL


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS

TRACK-TYPE TRACTOR D6G2 XL TRACK-TYPE TRACTOR C6G
 D6G2 XL TRACK-TYPE TRACTOR C6G01000-UP (MACHINE) POWERED BY 3306 Engine SEBP4965 D6G2 XL C6G   (2006)

WORK TOOLS

BLADE GP
BLADE GP-ANGLING
305-9485 BLADE GP-ANGLING
BLADE GP-SEMI-UNIVERSAL
286-2249 BLADE GP-SEMI-UNIVERSAL
BLADE GP-STRAIGHT
226-2126 BLADE GP-STRAIGHT
BLADE GP-STRAIGHT
283-7369 BLADE GP-STRAIGHT
 

#SEBP49650420
 

226-2126: BLADE GP-STRAIGHT

226-2126 BLADE GP-STRAIGHT
S/N S6G1-UP
PART OF 223-6599, 281-6879, 282-5953, 283-5386 BULLDOZER AR-STRAIGHT
AN ATTACHMENT
i02535057 SEBP4965
2262126 BLADE GP-STRAIGHT Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-2783 Y [1] EDGE GP-BIT & CUTTING  
2. 225-9317 Y [1] BLADE AS-STRAIGHT  
3. 4J-1611 [2] PLATE-WEAR  
4. 340-3755 B [8] SHIM (3-MM THK)  
5. 5F-8933 [4] BOLT-PLOW (3/4-10X3.75-IN)  
6. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
7. 3B-4512 [4] LOCKWASHER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP49650421
 

283-7369: BLADE GP-STRAIGHT

283-7369 BLADE GP-STRAIGHT -WASTE HANDLING
S/N C6G1000-UP
AN ATTACHMENT
i02751933 SEBP4965
2837369 BLADE GP-STRAIGHT Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-1611 [2] PLATE-WEAR  
2. 340-3755 B [8] SHIM (3-MM THK)  
3. 7J-2783 Y [1] EDGE GP-BIT & CUTTING  
4. 283-7370 Y [1] BLADE AS-STRAIGHT  
5. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
6. 5F-8933 [4] BOLT-PLOW (3/4-10X3.75-IN)  
7. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP49650422
 

269-0366: EDGE GP-BIT & CUTTING

269-0366 EDGE GP-BIT & CUTTING
S/N 6071-UP; C6G1000-UP
PART OF 268-4163 BLADE & EDGE GP-SEMI-UNIVERSAL, 286-2249 BLADE GP-SEMI-UNIVERSAL
AN ATTACHMENT
i02531490 SEBP4965
2690366 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 269-0367 [2] EDGE-CUTTING  
2. 268-1114 [1] BIT (RH)  
3. 268-1115 [1] BIT (LH)  
4. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
 

#SEBP49650423
 

7J-2778: EDGE GP-BIT & CUTTING

7J-2778 EDGE GP-BIT & CUTTING -ANGLING
S/N 1231-UP; C6G1000-UP; A6H1-UP; A6Z1-UP
PART OF 226-2127, 305-9485 BLADE GP-ANGLING
AN ATTACHMENT
i02536805 SEBP4965
7J2778 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-3009 [2] EDGE-CUTTING  
2. 3G-8297 [1] BIT-END (RH)  
3. 3G-8298 [1] BIT-END (LH)  
4. 4F-7827 [32] BOLT-PLOW (3/4-10X2.25-IN)  
5. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
 

#SEBP49650424
 

7J-2783: EDGE GP-BIT & CUTTING

7J-2783 EDGE GP-BIT & CUTTING -STRAIGHT
S/N C6G1000-UP; S6G1-UP
PART OF 226-2126, 283-7369 BLADE GP-STRAIGHT
AN ATTACHMENT
i02535207 SEBP4965
7J2783 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-3013 [1] EDGE-CUTTING (CENTER)  
2. 4F-7827 [27] BOLT-PLOW (3/4-10X2.25-IN)  
3. 2J-3506 [27] NUT-FULL (3/4-10-THD)  
4. 3G-8319 [1] BIT-END (RH)  
5. 3G-8320 [1] BIT-END (LH)  
6. 4T-3010 [2] EDGE-CUTTING (END)  
 

#SEBP49650425
 

3K-9880: MOUNTING GP-RIPPER

3K-9880 MOUNTING GP-RIPPER
S/N 3211-UP
PART OF 279-6189 RIPPER AR
AN ATTACHMENT
i02536392 SEBP4965
3K9880 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0405 [4] BOLT (1-8X2.75-IN)  
2. 7M-9650 [16] WASHER (5.94-MM THK)  
3. 7F-9547 [1] PIN AS-DRAWBAR  
4. 4K-1079 [8] STUD (3/4X2.9IN OAL)  
5. 7X-0519 [8] WASHER-HARD (20X33.5X5-MM THK)  
6. 6B-6682 [8] NUT-FULL (3/4-16-THD)  
7. 3K-1516 [1] SEAL-RING  
8. 2K-0703 [1] BAR  
9. 0S-1621 [2] BOLT (1/2-13X1-IN)  
10. 3K-9750 [1] PIN  
11. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
12. 3K-9843 [2] STUD-TAPERLOCK (1 1/4X4.9IN OAL)  
13. 7X-0451 [2] NUT-FULL (1-1/4-7-THD)  
14. 2J-3507 [10] NUT-FULL (1-8-THD)  
15. 5D-3118 [8] STUD-TAPERLOCK (1-8-THD)(1-8X3.9IN OAL)  
16. 8J-0980 [1] PLATE AS-MOUNTING  
17. 4K-3613 [1] PLATE AS  
18. 3B-4647 [1] PIN-COTTER  
19. 9J-9598 [2] PIN  
20. 3B-5325 [4] PIN-COTTER  
21. 4K-4487 [1] PLATE (RH)  
22. 4K-4488 [1] PLATE (LH)  
23. 7X-0443 [2] BOLT (1-8X5.5-IN)  
24. 2K-6563 [2] PIN  
25. 4K-3927 B [10] SHIM (8.13MM THK)  
26. 1D-4609 [6] BOLT (3/4-10X3-IN)  
27. 3B-4508 [2] LOCKWASHER  
28. 5P-6652 [6] WASHER (20X44.5X6-MM THK)  
29. 4K-0684 [2] WASHER-HARD (34X55X6-MM THK)  
  B   USE AS REQUIRED
 

#SEBP49650426
 

279-6189: RIPPER AR

279-6189 RIPPER AR
S/N 3211-UP
AN ATTACHMENT
i04870529 SEBP4965
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  130-6135 Y [1] CYLINDER GP-RIPPER  
  281-6891 Y [1] LINES GP-RIPPER  
  3K-9880 Y [1] MOUNTING GP-RIPPER  
  279-6188 Y [1] RIPPER GP  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
    (ON REAR OF BAR ASSEMBLY)
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49650427
 

279-6188: RIPPER GP

279-6188 RIPPER GP
S/N 3211-UP
PART OF 279-6189 RIPPER AR
AN ATTACHMENT
i02536607 SEBP4965
2796188 RIPPER GP Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-2306 [2] LINK  
2. 2K-6562 [2] PIN  
3. 3B-8489 [7] FITTING-GREASE (1/8-27 PTF)  
4. 5K-2657 [1] LINK AS  
5. 8J-2189 Y [1] TOOTH GP-RIPPER  
6. 279-6187 [1] CARRIAGE AS  
7. 1K-6872 [1] LOCKNUT (1/2-13-THD)  
8. 2K-4683 [1] PIN  
9. 3B-5325 [4] PIN-COTTER  
10. 7X-0337 [1] BOLT (1/2-13X5.75-IN)  
11. 9J-9598 [2] PIN  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49650428
 

8J-2189: TOOTH GP-RIPPER

8J-2189 TOOTH GP-RIPPER
S/N 3211-UP
PART OF 279-6188 RIPPER GP
AN ATTACHMENT
i02536824 SEBP4965
8J2189 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-0359 [1] TIP-RIPPER  
2. 484-8282 [1] SHANK AS-RIPPER  
3. 114-0358 [1] PIN  
4. 114-0359 [1] RETAINER AS  
5. 3B-5325 [2] PIN-COTTER  
6. 8J-2190 [1] PIN  
 

#SEBP49650429
 

291-5274: FILM GP

291-5274 FILM GP
S/N C6G1000-UP
PART OF 283-3098 PLATE & FILM GP
i02747051 SEBP4965
2915274 FILM GP Parts scheme
  For full view, you need register

Parts for your D6G2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 310-6381 [1] FILM-IDENTIFICATION (D6G2 XL, LH)  
2. [1] FILM-IDENTIFICATION (D6G2 XL, RH)  
3. [1] FILM-IDENTIFICATION (CAT, LH)  
4. [1] FILM-IDENTIFICATION (CAT, RH)  
5. [1] FILM-STRIPE (LH)  
6. [1] FILM-STRIPE (RH)  
7. [1] FILM-IDENTIFICATION (CATERPILLAR)  
8. 298-8086 [1] FILM-IDENTIFICATION (CAT)  
 

Information:

Caterpillar Parts SIS Catalog D6G2 XL :

BLADE GP-SEMI-UNIVERSAL
286-2249 BLADE GP-SEMI-UNIVERSAL
BLADE GP-ANGLING
305-9485 BLADE GP-ANGLING
BLADE GP-ANGLING
226-2127 BLADE GP-ANGLING
BLADE AS-STRAIGHT
7T-4585 BLADE AS-STRAIGHT
BLADE AS-STRAIGHT
283-7370 BLADE AS-STRAIGHT
BLADE AS-STRAIGHT
225-9317 BLADE AS-STRAIGHT
BLADE AS-SEMI-UNIVERSAL
283-7822 BLADE AS-SEMI-UNIVERSAL
BLADE AS-SEMI-UNIVERSAL
268-4164 BLADE AS-SEMI-UNIVERSAL
BLADE GP-STRAIGHT
283-7369 BLADE GP-STRAIGHT
EDGE GP-BIT & CUTTING
269-0366 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
7J-2778 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
7J-2783 EDGE GP-BIT & CUTTING
MOUNTING GP-RIPPER
3K-9880 MOUNTING GP-RIPPER
279-6189 RIPPER AR
RIPPER GP
279-6188 RIPPER GP
TOOTH GP-RIPPER
8J-2189 TOOTH GP-RIPPER

Truck sale:

2010 CAT D6G2 XL
USD $60,000 
2010 CAT D6G2 XL

Bedrock Machinery
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.