AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

276-8398 PUMP GP-FUEL INJECTION S/N C6E1-440 PART OF 282-3232 PUMP GP-FUEL INJECTION 12M MOTOR GRADER


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
TANK GP-FUEL

MOTOR GRADER 12M MOTOR GRADER B9R
 12M Motor Grader B9R00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4971 12M B9R   (2007)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
282-0490 INJECTOR GP-FUEL
INJECTOR GP-FUEL
320-0690 INJECTOR GP-FUEL
PUMP GP-FUEL INJECTION
276-8398 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
282-3232 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
311-4517 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
311-4517 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
317-8021 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
351-0973 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
368-0006 PUMP GP-FUEL INJECTION
 

#SEBP49710160
 

276-8398: PUMP GP-FUEL INJECTION

276-8398 PUMP GP-FUEL INJECTION
S/N C6E1-440
PART OF 282-3232 PUMP GP-FUEL INJECTION
i02525961 SEBP4971
2768398 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-7100 [1] SEAL-O-RING  
2. 238-0120 [1] SENSOR GP-SPEED (SECONDARY, TIMING)  
3. 247-6019 [1] SEAL-O-RING  
4. 248-1066 [1] FITTING-FUEL  
5. 293-0249 [1] PUMP GP-FUEL TRANSFER  
6. 117-1385 [1] SEAL-O-RING  
7. 5A-3604 M [5] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
8. 6D-7889 [1] SEAL-O-RING  
9. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
 

#SEBP49710161
 

282-3232: PUMP GP-FUEL INJECTION

282-3232 PUMP GP-FUEL INJECTION
S/N C6E1-440
PART OF 283-6282 ENGINE AR-PRIMARY
i02790088 SEBP4971
2823232 PUMP GP-FUEL INJECTION Parts scheme 2823232 PUMP GP-FUEL INJECTION Parts scheme 2823232 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 300-2940 [1] BRACKET  
2. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
4. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
5. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
6. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
7. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
8. 155-0576 [8] MOUNT-ISOLATION  
9. 216-9752 [2] WASHER  
10. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
11. 225-8524 [1] BOLT-SPECIAL  
12. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
13. 232-3149 [6] WASHER (8.35X16.85X1.55-MM THK)  
14. 241-4291 [4] SCREW  
15. 268-6677 [1] BRACKET AS  
  260-3718 [1] BRACKET  
15A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
16. 268-6678 [1] BRACKET AS  
  260-3719 [1] BRACKET  
16A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
17. 290-3910 [1] LINE-FUEL INJECTION  
18. 278-5168 [6] CLAMP-INJECTOR  
19. 278-5170 [6] BOLT  
20. 278-5180 [2] CLIP  
21. 278-5189 [1] TUBE AS  
22. 278-5201 [1] CONNECTION  
23. 278-5202 [2] SEAL-O-RING  
24. 278-5203 [4] SPACER  
28. 278-5225 [1] KIT-SENSOR (ENGINE OIL PRESSURE)  
28A. 278-5226 [1] SEAL-O-RING  
29. 311-3858 C [1] KIT-SENSOR (ENGINE SPEED)  
29A. 278-5227 [1] SEAL-O-RING  
30. 278-5272 [1] KIT-SENSOR (INTAKE AIR TEMPERATURE)  
30A. 278-5226 [1] SEAL-O-RING  
31. 278-5273 [1] KIT-SENSOR (AIR PRESSURE)  
31A. 199-9252 [1] SEAL-O-RING  
32. 278-5307 [1] KIT-SENSOR (COOLANT TEMPERATURE)  
32A. 199-9267 [1] SEAL-O-RING  
33. 311-6342 C [1] SENSOR AS-PRESSURE (FUEL RAIL PRESSURE)  
33A. 278-5309 [1] WASHER  
34. 280-1889 [4] CLAMP  
35. 280-1890 [4] CLAMP  
36. 280-1891 [4] ISOLATOR  
37. 310-7918 [1] BRACKET-SUPPORT  
38. 290-3911 [1] LINE-FUEL INJECTION (CYL NO. 1)  
39. 290-3912 [1] LINE-FUEL INJECTION (CYL NO. 2)  
40. 290-3913 [1] LINE-FUEL INJECTION (CYL NO. 3)  
41. 290-3914 [1] LINE-FUEL INJECTION (CYL NO. 4)  
42. 290-3915 [1] LINE-FUEL INJECTION (CYL NO. 5)  
43. 290-3916 [1] LINE-FUEL INJECTION (CYL NO. 6)  
44. 287-6838 [1] BRACKET  
45. 287-6839 [2] BOLT  
46. 276-8398 Y [1] PUMP GP-FUEL INJECTION  
47. 286-3683 [1] CONTROL GP-UNPROGRAMMED  
48. 282-0490 Y [6] INJECTOR GP-FUEL  
49. 308-8426 [1] RAIL AS-FUEL  
50. 293-9901 [1] BRACKET  
51. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
52. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
53. 217-9039 [1] STRAP-CABLE  
   
  278-4138 F [5] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP49710162
 

311-4517: PUMP GP-FUEL INJECTION

311-4517 PUMP GP-FUEL INJECTION
S/N C6E1-22184
PART OF 283-6282, 284-5729 ENGINE AR-PRIMARY
i03984849 SEBP4971
3114517 PUMP GP-FUEL INJECTION Parts scheme 3114517 PUMP GP-FUEL INJECTION Parts scheme 3114517 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [2] BOLT (M8X1.25X20-MM)  
2. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
3. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
4. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
5. 6I-4374 M [2] BOLT (M8X1.25X60-MM)  
6. 6I-4793 M [1] BOLT (M8X1.25X50-MM)  
7. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 160-0162 [2] WASHER  
10. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
11. 217-9039 [1] STRAP-CABLE  
12. 225-8524 [1] BOLT-SPECIAL  
13. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
14. 241-4291 [4] SCREW  
15. 278-5168 [6] CLAMP-INJECTOR  
16. 278-5170 [6] BOLT  
17. 278-5180 [2] CLIP  
18. 278-5201 [2] CONNECTION  
19. 278-5225 [1] KIT-SENSOR  
19A. 199-9267 [1] SEAL-O-RING  
20. 278-5272 [1] KIT-SENSOR  
20A. 278-5226 [1] SEAL-O-RING  
21. 278-5273 [1] KIT-SENSOR  
21A. 199-9252 [1] SEAL-O-RING  
22. 278-5307 [1] KIT-SENSOR  
22A. 199-9267 [1] SEAL-O-RING  
23. 287-6838 [1] BRACKET  
24. 287-6839 [2] BOLT  
25. 351-0973 CY [1] PUMP GP-FUEL INJECTION  
26. 310-7918 [1] BRACKET-SUPPORT  
27. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
27A. 274-1639 [1] SEAL  
  238-0120 [1] SENSOR GP-SPEED  
28. 318-2396 [1] RAIL AS-FUEL  
28A. 305-5291 [1] VALVE AS-RELIEF  
29. 321-1270 [1] TUBE-OIL  
30. 330-3685 [4] CLAMP  
31. 330-3687 [4] CLAMP  
32. 330-5467 [4] ISOLATOR  
33. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
34. 278-5202 [2] SEAL-O-RING  
35. 336-8180 [1] LINE-FUEL INJECTION  
36. 336-8174 [1] LINE-FUEL INJECTION (CYL NO. 1)  
37. 336-8175 [1] LINE-FUEL INJECTION (CYL NO. 2)  
38. 336-8176 [1] LINE-FUEL INJECTION (CYL NO. 3)  
39. 336-8177 [1] LINE-FUEL INJECTION (CYL NO. 4)  
40. 336-8178 [1] LINE-FUEL INJECTION (CYL NO. 5)  
41. 336-8179 [1] LINE-FUEL INJECTION (CYL NO. 6)  
42. 320-0690 Y [6] INJECTOR GP-FUEL  
43. 300-2940 [1] BRACKET  
44. 331-7539 [1] CONTROL GP-UNPROGRAMMED (ENGINE)  
   
  278-4138 F [4] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP49710163
 

311-4517: PUMP GP-FUEL INJECTION

311-4517 PUMP GP-FUEL INJECTION
S/N C6E22185-22364
PART OF 283-6282 ENGINE AR-PRIMARY
i04545240 SEBP4971
3114517 PUMP GP-FUEL INJECTION Parts scheme 3114517 PUMP GP-FUEL INJECTION Parts scheme 3114517 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [2] BOLT (M8X1.25X20-MM)  
2. 6I-0254 CM [3] BOLT (M8X1.25X30-MM)  
3. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
4. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
6. 6I-4793 CM [3] BOLT (M8X1.25X50-MM)  
7. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 346-0007 [2] WASHER  
10. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
12. 346-0006 [1] BOLT-SPECIAL  
13. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
15. 278-5168 [6] CLAMP-INJECTOR  
16. 278-5170 [6] BOLT  
17. 278-5180 [2] CLIP  
18. 278-5201 [2] CONNECTION  
19. 278-5225 [1] KIT-SENSOR  
19A. 199-9267 [1] SEAL-O-RING  
20. 278-5272 [1] KIT-SENSOR  
20A. 278-5226 [1] SEAL-O-RING  
21. 278-5273 [1] KIT-SENSOR  
21A. 199-9252 [1] SEAL-O-RING  
22. 278-5307 [1] KIT-SENSOR  
22A. 199-9267 [1] SEAL-O-RING  
23. 287-6838 [1] BRACKET  
24. 287-6839 [2] BOLT  
25. 317-8021 Y [1] PUMP GP-FUEL INJECTION  
26. 310-7918 [1] BRACKET-SUPPORT  
27. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
27A. 274-1639 [1] SEAL  
  238-0120 [1] SENSOR GP-SPEED  
28. 358-6634 [1] RAIL GP-FUEL  
28A. 305-5291 [1] VALVE AS-RELIEF  
29. 321-1270 [1] TUBE-OIL  
30. 330-3685 C [3] CLAMP  
31. 330-3687 C [3] CLAMP  
32. 330-5467 C [3] ISOLATOR  
33. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
34. 228-7100 [2] SEAL-O-RING  
35. 355-1582 C [1] TUBE AS  
36. 336-8174 [1] LINE-FUEL INJECTION (CYL NO. 1)  
37. 336-8175 [1] LINE-FUEL INJECTION (CYL NO. 2)  
38. 336-8176 [1] LINE-FUEL INJECTION (CYL NO. 3)  
39. 336-8177 [1] LINE-FUEL INJECTION (CYL NO. 4)  
40. 336-8178 [1] LINE-FUEL INJECTION (CYL NO. 5)  
41. 336-8179 [1] LINE-FUEL INJECTION (CYL NO. 6)  
42. 320-0690 Y [6] INJECTOR GP-FUEL  
44. 331-7539 [1] CONTROL GP-UNPROGRAMMED (ENGINE)  
45. 280-1892 C [3] BOLT  
46. 1N-3361 C [1] SPACER  
   
  278-4138 F [4] KIT-FUEL LINE PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP49710164
 

317-8021: PUMP GP-FUEL INJECTION

317-8021 PUMP GP-FUEL INJECTION
S/N C6E1-UP
PART OF 311-4517, 368-0006 PUMP GP-FUEL INJECTION
i03173763 SEBP4971
3178021 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-0172 [1] FITTING-FUEL  
2. 228-7100 [3] SEAL-O-RING  
3. 238-0120 [1] SENSOR GP-SPEED (SECONDARY, TIMING)  
4. 247-6019 [1] SEAL-O-RING  
5. 248-1066 [1] FITTING-FUEL  
6. 257-2381 [2] PIN  
7. 257-2382 [2] PLUG  
8. 258-8149 [2] SPRING  
9. 294-3031 [1] BOLT-SPECIAL  
10. 294-3032 [1] WASHER-SPECIAL  
11. 295-4801 M [1] NUT (M14X1.5-THD)  
12. 426-4806 [1] PUMP GP-FUEL TRANSFER  
13. 117-1385 [1] SEAL-O-RING  
14. 287-7272 [1] CONNECTOR  
  3E-4296 [1] SEAL-O-RING  
15. 334-2932 [1] SEAL-O-RING  
16. 3B-4509 [1] LOCKWASHER  
17. 5A-3604 M [5] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
18. 8C-3076 [1] SEAL-O-RING  
19. 8L-2779 [1] SEAL-O-RING  
20. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
 

#SEBP49710165
 

351-0973: PUMP GP-FUEL INJECTION

351-0973 PUMP GP-FUEL INJECTION
S/N C6E5433-UP
PART OF 311-4517 PUMP GP-FUEL INJECTION
i03975992 SEBP4971
3510973 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-0172 [1] FITTING-FUEL  
2. 228-7100 [3] SEAL-O-RING  
3. 238-0120 [1] SENSOR GP-SPEED (SECONDARY, TIMING)  
4. 248-1066 [1] FITTING-FUEL  
5. 257-2381 [2] PIN  
6. 257-2382 [2] PLUG  
7. 258-8149 [2] SPRING  
8. 294-3031 [1] BOLT-SPECIAL  
9. 294-3032 [1] WASHER-SPECIAL  
10. 295-4801 M [1] NUT (M14X1.5-THD)  
11. 296-3542 [1] LOCKWASHER  
12. 351-2799 [1] FITTING  
13. 117-1385 [1] SEAL-O-RING  
14. 334-2932 [1] SEAL-O-RING  
15. 5A-3604 M [5] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
16. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
17. 247-6019 [1] SEAL-O-RING  
18. 8L-2779 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP49710166
 

368-0006: PUMP GP-FUEL INJECTION

368-0006 PUMP GP-FUEL INJECTION
S/N C6E1-UP
PART OF 283-6282, 284-5729, 367-6737, 368-4773, 435-1681 ENGINE AR-PRIMARY
i04667134 SEBP4971
3680006 PUMP GP-FUEL INJECTION Parts scheme 3680006 PUMP GP-FUEL INJECTION Parts scheme 3680006 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [6] BOLT (M8X1.25X20-MM)  
2. 6I-0254 M [3] BOLT (M8X1.25X30-MM)  
3. 6I-0260 M [4] BOLT (M8X1.25X25-MM)  
4. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
5. 6I-4793 M [3] BOLT (M8X1.25X50-MM)  
6. 7W-2632 [1] WASHER (8.5X16.8X1.6-MM THK)  
7. 101-3895 M [1] BOLT (M8X1.25X35-MM)  
8. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
9. 155-0576 [8] MOUNT-ISOLATION  
10. 217-0099 [4] SPACER (8.2X25X2-MM THK)  
11. 230-8989 [1] GEAR-FUEL PUMP (68-TEETH)  
12. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
15. 278-5168 [6] CLAMP-INJECTOR  
16. 278-5170 [6] BOLT  
17. 278-5180 [2] CLIP  
18. 278-5201 [2] CONNECTION  
19. 228-7100 [2] SEAL-O-RING  
20. 278-5203 [4] SPACER  
21. 278-5225 [1] KIT-SENSOR  
21A. 199-9267 [1] SEAL-O-RING  
22. 278-5272 [1] KIT-SENSOR  
22A. 278-5226 [1] SEAL-O-RING  
23. 278-5273 [1] KIT-SENSOR  
23A. 199-9252 [1] SEAL-O-RING  
24. 278-5307 [1] KIT-SENSOR  
24A. 199-9267 [1] SEAL-O-RING  
25. 280-1892 [3] BOLT  
26. 287-6838 [1] BRACKET  
27. 287-6839 [2] BOLT  
28. 293-9901 [1] BRACKET  
29. 268-6678 [1] BRACKET AS  
29A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
30. 268-6677 [1] BRACKET AS  
30A. 260-3939 M [1] SCREW-HEX HEAD (M6X1X25-MM)  
31. 320-0690 Y [6] INJECTOR GP-FUEL  
33. 311-6342 [1] SENSOR AS-PRESSURE (FUEL)  
33A. 309-8006 WASHER  
34. 310-7918 [1] BRACKET-SUPPORT  
36. 311-3858 [1] KIT-SENSOR (ENGINE SPEED)  
36A. 274-1639 [1] SEAL  
  238-0120 [1] SENSOR GP-SPEED  
37. 1N-3361 [1] SPACER  
38. 317-8021 Y [1] PUMP GP-FUEL INJECTION  
39. 438-3416 [1] RAIL AS-FUEL  
39A. 416-7101 [1] VALVE AS-RELIEF  
  228-7102 [1] SEAL-O-RING  
40. 355-1582 [1] TUBE AS  
41. 321-1270 [1] TUBE-OIL  
42. 330-3685 [3] CLAMP  
43. 330-3687 [3] CLAMP  
44. 330-5467 [3] ISOLATOR  
45. 331-7539 [1] CONTROL GP-UNPROGRAMMED  
46. 336-8174 [1] LINE-FUEL INJECTION (CYL NO. 1)  
47. 336-8175 [1] LINE-FUEL INJECTION (CYL NO. 2)  
48. 336-8176 [1] LINE-FUEL INJECTION (CYL NO. 3)  
49. 336-8177 [1] LINE-FUEL INJECTION (CYL NO. 4)  
50. 336-8178 [1] LINE-FUEL INJECTION (CYL NO. 5)  
51. 336-8179 [1] LINE-FUEL INJECTION (CYL NO. 6)  
52. 346-0006 [1] BOLT-SPECIAL  
53. 346-0007 [2] WASHER  
   
  278-4138 F [4] KIT-FUEL LINE PROTECTION  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP49710167
 

212-3657: PUMP GP-FUEL PRM & WATER SEP

212-3657 PUMP GP-FUEL PRM & WATER SEP -ELECTRIC
S/N B9R1-UP
PART OF 247-4030 LINES GP-FUEL
i01699680 SEBP4971
2123657 PUMP GP-FUEL PRM & WATER SEP Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-9570 Y [1] FILTER GP-WATER SEP & FUEL (PRIMING)  
2. 217-8339 [1] PUMP GP-FUEL PRIMING (24-VOLT)  
  6D-5801 [2] LOCKNUT (8-32-THD)  
  9S-2437 [3] SCREW-TAPPING (10-24X19.05-MM)  
  9S-8002 [1] PLUG (7/16-20-THD)  
  179-7400 [2] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49710168
 

250-9200: RECEIVER GP-FAST FILL FUEL

250-9200 RECEIVER GP-FAST FILL FUEL
S/N B9R1-UP
PART OF 281-6780 ADAPTER GP-FAST FILL FUEL
i02738225 SEBP4971
2509200 RECEIVER GP-FAST FILL FUEL Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 232-1767 [1] RECEIVER AS (FAST FILL FUEL)  
2. 250-3865 [1] VALVE AS-SHUTOFF (FAST FILL FUEL)  
3. 1P-4582 [2] FLANGE-HALF  
4. 4J-0527 [1] SEAL-O-RING  
5. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
 

#SEBP49710169
 

248-4765: TANK GP-FUEL

248-4765 TANK GP-FUEL
S/N B9R1-UP
PART OF 281-5636, 281-5637 TANK GP-FUEL
i02736417 SEBP4971
2484765 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 12M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5053 [1] ADAPTER  
2. 250-9305 [1] BUSHING  
3. 268-1543 [1] ELBOW AS  
  2T-1925 [1] ELBOW  
  6V-8397 [1] SEAL-O-RING  
4. 3J-1907 [1] SEAL-O-RING  
5. 7M-8485 [1] SEAL-O-RING  
6. 9M-7958 [3] CLAMP-HOSE  
7. 9S-4181 [1] PLUG (1-5/16-12-THD)  
8. 9S-4191 [1] PLUG (9/16-18-THD)  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
High Leak-off of the Electronic Unit Injector on C6.6 and C4.4 Engines {1251, 1290}
High Leak-off of the Electronic Unit Injector on C6.6 and C4.4 Engines {1251, 1290}
Adjusting the Settings on Engine Data Logs on C6.6 and C4.4 Engines{0701, 1714}
Adjusting the Settings on Engine Data Logs on C6.6 and C4.4 Engines{0701, 1714}
Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288}
Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288}
Improved Fuel System Diagnostic Test Documentation for Certain C4.4 and C6.6 Engines{1250, 1280}
Improved Fuel System Diagnostic Test Documentation for Certain C4.4 and C6.6 Engines{1250, 1280}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Fuel Injection Nozzles
C6.6 Engines for Caterpillar Built Machines
Fuel Injection Pump
C6.6 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
PRODUCT LINE EXPANSION: REMAN COMMON RAIL FUEL PUMPS FOR CERTAIN TIER III C4.2, C4.4, C6.4, C6.6 Engines
PRODUCT LINE EXPANSION: REMAN COMMON RAIL FUEL PUMPS FOR CERTAIN TIER III C4.2, C4.4, C6.4, C6.6 Engines
PRODUCT LINE INTRODUCTION: REMAN COMMON RAIL FUEL INJECTORS FOR CERTAIN C4.4, C6.6 TIER III ENGINES AND CERTAIN SMALL AND MEDIUM EXCAVATORS
PRODUCT LINE INTRODUCTION: REMAN COMMON RAIL FUEL INJECTORS FOR CERTAIN C4.4, C6.6 TIER III ENGINES AND CERTAIN SMALL AND MEDIUM EXCAVATORS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
CAT REMAN BRINGS TO THE MARKET SEVERAL NEW FUEL INJECTOR AND PUMP SOLUTIONS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
Testing and Adjusting
Fuel Injection Timing - Check
C6.6 Engines for Caterpillar Built Machines
Troubleshooting
Injector Trim File
C6.6 Engines For Caterpillar Built Machines
CID 0005 FMI 02
C6.6 Engines For Caterpillar Built Machines
CID 0005 FMI 05
C6.6 Engines For Caterpillar Built Machines
CID 0005 FMI 06
C6.6 Engines For Caterpillar Built Machines
CID 0005 FMI 07
C6.6 Engines For Caterpillar Built Machines
CID 0006 FMI 02
C6.6 Engines For Caterpillar Built Machines
CID 0006 FMI 05
C6.6 Engines For Caterpillar Built Machines
CID 0006 FMI 06
C6.6 Engines For Caterpillar Built Machines
CID 0006 FMI 07
C6.6 Engines For Caterpillar Built Machines
CID 0001 FMI 05
C6.6 Engines For Caterpillar Built Machines
CID 0001 FMI 06
C6.6 Engines For Caterpillar Built Machines
CID 0002 FMI 05
C6.6 Engines For Caterpillar Built Machines
CID 0002 FMI 06
C6.6 Engines For Caterpillar Built Machines
CID 0003 FMI 05
C6.6 Engines For Caterpillar Built Machines
CID 0003 FMI 06
C6.6 Engines For Caterpillar Built Machines
CID 0004 FMI 05
C6.6 Engines For Caterpillar Built Machines
CID 0004 FMI 06
C6.6 Engines For Caterpillar Built Machines
CID 0001 FMI 02
C6.6 Engines For Caterpillar Built Machines
CID 0002 FMI 02
C6.6 Engines For Caterpillar Built Machines
CID 0004 FMI 02
C6.6 Engines For Caterpillar Built Machines
CID 0001 FMI 07
C6.6 Engines For Caterpillar Built Machines
CID 0002 FMI 07
C6.6 Engines For Caterpillar Built Machines
CID 0003 FMI 07
C6.6 Engines For Caterpillar Built Machines
CID 0004 FMI 07
C6.6 Engines For Caterpillar Built Machines
CID 1779 FMI 05
C6.6 Engines For Caterpillar Built Machines
CID 1779 FMI 06
C6.6 Engines For Caterpillar Built Machines
Injector Data Incorrect - Test
C6.6 Engines For Caterpillar Built Machines
Injector Solenoid Circuit - Test
C6.6 Engines For Caterpillar Built Machines
CID 0003 FMI 02
C6.6 Engines For Caterpillar Built Machines
Fuel Rail Pump Solenoid - Test
C6.6 Engines For Caterpillar Built Machines
CID 1627 FMI 05
C6.6 Engines For Caterpillar Built Machines
CID 1627 FMI 06
C6.6 Engines For Caterpillar Built Machines
Disassembly and Assembly
Electronic Unit Injector - Install
C6.6 Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove
C6.6 Engines for Caterpillar Built Machines
Fuel Injection Pump - Install
C6.6 Engines for Caterpillar Built Machines
Fuel Injection Pump Gear - Remove
C6.6 Engines for Caterpillar Built Machines
Fuel Injection Pump Gear - Install
C6.6 Engines for Caterpillar Built Machines
Electronic Unit Injector - Remove
C6.6 Engines for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Fuel Transfer Pump {1251}
2008/06/30
Support for Fuel Injection Pumps {1251}
2008/07/14
Improved Electronic Unit Injectors for C6.6 and C4.4 Engines {1251, 1290}
2009/07/20
Improved Fuel Injection Pump Timing Tool {1251}
2009/01/26
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
New Pressure Relief Valve {1251, 1715}
2009/06/01
New Fuel Injection Lines {1251, 1252}
2009/08/24
Fuel Injection Pump Gear on 3054C, C3.3, C6.6, C4.4 and C4.4 (Mech) Engines {1251, 1290}
2009/12/09
New Fuel Manifold (Rail) for C6.6 and C4.4 Machine Engines {1288}
2010/12/08
Fuel Injection Pump on Certain C6.6 and C6.4 Engines {1251, 1274}
2011/11/23
New Clamp for Fuel Injection Lines on C6.6 Machine Engines {1251, 1290, 7553}
2012/10/11
Improved Diagnostic Process is Available for the High Pressure Fuel System on C6.6 and C4.4 Machine Engines {1251, 1290}
2012/08/02
Procedure to Program Injector Trim Files When Injector Trim Files Are Missing in the ECM of Certain Machine Engines {1290, 1920}
2012/10/09

Caterpillar Parts SIS Catalog 12M :

MOUNTING GP-FUEL TANK
281-5635 MOUNTING GP-FUEL TANK
LINES GP-FUEL
279-9346 LINES GP-FUEL
LINES GP-FUEL
279-9346 LINES GP-FUEL
LINES GP-FUEL
279-9346 LINES GP-FUEL
LINES GP-FUEL
247-4030 LINES GP-FUEL
LINES GP-FUEL
247-4030 LINES GP-FUEL
LINES GP-FUEL
247-4030 LINES GP-FUEL
INJECTOR GP-FUEL
320-0690 INJECTOR GP-FUEL
PUMP GP-FUEL INJECTION
282-3232 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
311-4517 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
311-4517 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
317-8021 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
351-0973 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
368-0006 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRM & WATER SEP
212-3657 PUMP GP-FUEL PRM & WATER SEP
RECEIVER GP-FAST FILL FUEL
250-9200 RECEIVER GP-FAST FILL FUEL

Truck sale:

 
181,000 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
 
187,500 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
 
289,000 
Caterpillar 12M2, Construction
- motor graders
WAGNER EQUIPMENT CO
 
170,000 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
Caterpillar 12M2, Construction
205,000 
Caterpillar 12M2, Construction
- motor graders
CAROLINA CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.