OPERATOR STATION
CONTROL GPOPERATOR STATION
CONTROL GP
#SEBP49711050
344-2765: CONTROL GP-ELECTROHYDRAULIC
344-2765 CONTROL GP-ELECTROHYDRAULIC
S/N B9R1-UP
PART OF 309-9847 CONTROL AR-HYDRAULIC
Type 1
S/N B9R1-UP
PART OF 309-9847 CONTROL AR-HYDRAULIC
Type 1
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 251-2247 | [1] | GROMMET | |
| 2. | 279-5308 | [1] | LAMP AS-LED (24-VOLT, GREEN) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 358-4932 | [1] | CONTROL AS-PROPORTIONAL (RIPPER) | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3137 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 4. | 281-0387 | [1] | PLATE (REAR) | |
| 5. | 281-0390 | [1] | GRIP | |
| 6. | 281-0431 | [1] | PLATE AS | |
| 7. | 286-0276 | [1] | FILM-INSTRUCTION (FLOAT) | |
| 8. | 299-1030 | [1] | ENCLOSURE AS | |
| 9. | 334-9395 | [1] | KNOB | |
| 10. | 351-8482 | [1] | BRACKET | |
| 11. | 352-1502 | [1] | BEARING | |
| 12. | 352-2586 | [1] | BOLT-SPECIAL | |
| 13. | 127-2170 M | [2] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 14. | 225-3109 M | [5] | SCREW-TRUSS HEAD (M4X0.7X14-MM) | |
| 15. | 282-0808 E | SLEEVE (31-CM) | ||
| 16. | 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49711051
344-2765: CONTROL GP-ELECTROHYDRAULIC
344-2765 CONTROL GP-ELECTROHYDRAULIC
S/N B9R1-UP
PART OF 309-9847 CONTROL AR-HYDRAULIC
Type 2
S/N B9R1-UP
PART OF 309-9847 CONTROL AR-HYDRAULIC
Type 2
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 251-2247 | [1] | GROMMET | |
| 2. | 279-5308 | [1] | LAMP AS-LED (24-VOLT, GREEN) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 466-0908 C | [1] | CONTROL AS-PROPORTIONAL (RIPPER) | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3137 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 4. | 281-0387 | [1] | PLATE (REAR) | |
| 5. | 281-0390 | [1] | GRIP | |
| 6. | 281-0431 | [1] | PLATE AS | |
| 7. | 286-0276 | [1] | FILM-INSTRUCTION (FLOAT) | |
| 8. | 299-1030 | [1] | ENCLOSURE AS | |
| 9. | 334-9395 | [1] | KNOB | |
| 10. | 351-8482 | [1] | BRACKET | |
| 11. | 352-1502 | [1] | BEARING | |
| 12. | 352-2586 | [1] | BOLT-SPECIAL | |
| 13. | 127-2170 M | [2] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 14. | 225-3109 M | [5] | SCREW-TRUSS HEAD (M4X0.7X14-MM) | |
| 15. | 282-0808 E | SLEEVE (31-CM) | ||
| 16. | 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49711052
344-2766: CONTROL GP-ELECTROHYDRAULIC
344-2766 CONTROL GP-ELECTROHYDRAULIC
S/N B9R1-UP
PART OF 365-4015 CONTROL AR-HYDRAULIC
Type 1
S/N B9R1-UP
PART OF 365-4015 CONTROL AR-HYDRAULIC
Type 1
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 358-4931 | [1] | CONTROL AS-PROPORTIONAL (REAR IMPLEMENT) | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3136 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 2. | 251-2247 | [1] | GROMMET | |
| 3. | 279-5308 | [1] | LAMP AS-LED (24-VOLT, GREEN) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 358-4932 | [1] | CONTROL AS-PROPORTIONAL (FRONT IMPLEMENT) | |
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3137 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 5. | 281-0387 | [1] | PLATE (REAR) | |
| 6. | 281-0390 | [1] | GRIP | |
| 7. | 281-0431 | [1] | PLATE AS | |
| 8. | 286-0274 | [1] | FILM-INSTRUCTION (FLOAT/NO FLOAT) | |
| 9. | 299-1030 | [1] | ENCLOSURE AS | |
| 10. | 334-9395 | [1] | KNOB | |
| 11. | 351-8482 | [1] | BRACKET | |
| 12. | 352-1502 | [1] | BEARING | |
| 13. | 352-2586 | [1] | BOLT-SPECIAL | |
| 14. | 127-2170 M | [2] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 15. | 225-3109 M | [5] | SCREW-TRUSS HEAD (M4X0.7X14-MM) | |
| 16. | 282-0808 E | SLEEVE (31-CM) | ||
| 17. | 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49711053
344-2766: CONTROL GP-ELECTROHYDRAULIC
344-2766 CONTROL GP-ELECTROHYDRAULIC
S/N B9R1-UP
PART OF 365-4015 CONTROL AR-HYDRAULIC
Type 2
S/N B9R1-UP
PART OF 365-4015 CONTROL AR-HYDRAULIC
Type 2
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 466-0907 C | [1] | CONTROL AS-PROPORTIONAL (REAR IMPLEMENT) | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3136 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 2. | 251-2247 | [1] | GROMMET | |
| 3. | 279-5308 | [1] | LAMP AS-LED (24-VOLT, GREEN) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 466-0908 C | [1] | CONTROL AS-PROPORTIONAL (FRONT IMPLEMENT) | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3137 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 5. | 281-0387 | [1] | PLATE (REAR) | |
| 6. | 281-0390 | [1] | GRIP | |
| 7. | 281-0431 | [1] | PLATE AS | |
| 8. | 286-0274 | [1] | FILM-INSTRUCTION (FLOAT/NO FLOAT) | |
| 9. | 299-1030 | [1] | ENCLOSURE AS | |
| 10. | 334-9395 | [1] | KNOB | |
| 11. | 351-8482 | [1] | BRACKET | |
| 12. | 352-1502 | [1] | BEARING | |
| 13. | 352-2586 | [1] | BOLT-SPECIAL | |
| 14. | 127-2170 M | [2] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 15. | 225-3109 M | [5] | SCREW-TRUSS HEAD (M4X0.7X14-MM) | |
| 16. | 282-0808 E | SLEEVE (31-CM) | ||
| 17. | 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49711054
360-7615: CONTROL GP-ELECTROHYDRAULIC
360-7615 CONTROL GP-ELECTROHYDRAULIC -AUXILIARY CONTROL
S/N B9R1-UP
POD
PART OF 309-9858, 309-9872, 365-3351, 365-3352, 365-3353 CONTROL AR-HYDRAULIC
S/N B9R1-UP
POD
PART OF 309-9858, 309-9872, 365-3351, 365-3352, 365-3353 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS#SEBP49711055
360-7616: CONTROL GP-ELECTROHYDRAULIC
360-7616 CONTROL GP-ELECTROHYDRAULIC -AUXILIARY CONTROL
S/N B9R1-UP
PART OF 365-3349, 365-3350 CONTROL AR-HYDRAULIC
S/N B9R1-UP
PART OF 365-3349, 365-3350 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS#SEBP49711056
233-3118: CONTROL GP-JOYSTICK
233-3118 CONTROL GP-JOYSTICK -RH
S/N B9R1-UP
PART OF 233-3146 CONTROL & MTG GP-JOYSTICK
S/N B9R1-UP
PART OF 233-3146 CONTROL & MTG GP-JOYSTICK
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS#SEBP49711057
300-6464: CONTROL GP-JOYSTICK
300-6464 CONTROL GP-JOYSTICK -LH
S/N B9R1-UP
PART OF 233-3146 CONTROL & MTG GP-JOYSTICK
FIELD REPLACEMENT ORDER @@@@@308-5204@@@@@
S/N B9R1-UP
PART OF 233-3146 CONTROL & MTG GP-JOYSTICK
FIELD REPLACEMENT ORDER @@@@@308-5204@@@@@
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 247-0733 | [1] | BOOT | |
| 3. | 9X-3401 | [23] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| -OR- | ||||
| 126-1767 | [23] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 4. | 8T-8737 | [5] | PLUG-SEAL | |
| 5. | 271-2811 | [1] | KIT-RECEPTACLE (12-PIN) | |
| 6. | 151-9274 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
#SEBP49711058
308-5203: CONTROL GP-JOYSTICK
308-5203 CONTROL GP-JOYSTICK -RH
S/N B9R1-UP
PART OF 309-5955 CONTROL & MTG GP-JOYSTICK, 319-8714 WIRING GP-CAB
FIELD REPLACEMENT ORDER @@@@@356-3609@@@@@
S/N B9R1-UP
PART OF 309-5955 CONTROL & MTG GP-JOYSTICK, 319-8714 WIRING GP-CAB
FIELD REPLACEMENT ORDER @@@@@356-3609@@@@@
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 169-0705 | [9] | SEAL | |
| 2. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 247-0733 | [1] | BOOT | |
| 4. | 9X-3401 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 5. | 8T-8737 | [9] | PLUG-SEAL | |
| 6. | 271-2811 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
#SEBP49711059
308-5204: CONTROL GP-JOYSTICK
308-5204 CONTROL GP-JOYSTICK -LH
S/N B9R1-UP
PART OF 309-5955 CONTROL & MTG GP-JOYSTICK, 319-8714 WIRING GP-CAB
FIELD REPLACEMENT ORDER @@@@@356-3607@@@@@
FIELD REPLACEMENT FOR @@@@@300-6464@@@@@
S/N B9R1-UP
PART OF 309-5955 CONTROL & MTG GP-JOYSTICK, 319-8714 WIRING GP-CAB
FIELD REPLACEMENT ORDER @@@@@356-3607@@@@@
FIELD REPLACEMENT FOR @@@@@300-6464@@@@@
For full view, you need register
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 169-0705 | [5] | SEAL | |
| 2. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 247-0733 | [1] | BOOT | |
| 4. | 9X-3401 | [23] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 5. | 8T-8737 | [5] | PLUG-SEAL | |
| 6. | 271-2811 | [1] | KIT-RECEPTACLE (12-PIN) | |
| 7. | 151-9274 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 342-9971 | [1] | SWITCH AS (FORWARD, NEUTRAL, REVERSE) | |
Information:
OPERATOR STATION
CONTROL GP
Special Instruction
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Installation and Removal of the Detent in the Joystick Control for the Steering in M-Series Motor Graders {3168, 4343, 5063, 5705}
Installation and Removal of the Detent in the Joystick Control for the Steering in M-Series Motor Graders {3168, 4343, 5063, 5705}
Installation and Removal of the Detent in the Joystick Control for the Steering in M-Series Motor Graders {3168, 4343, 5063, 5705}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Inadvertent Advanced Control Joystick (ACJ) Float Control Activation Occurs On Certain Motor Graders {3168, 4343, 5063, 5705, 7000}
Inadvertent Advanced Control Joystick (ACJ) Float Control Activation Occurs On Certain Motor Graders {3168, 4343, 5063, 5705, 7000}
Inadvertent Advanced Control Joystick (ACJ) Float Control Activation Occurs On Certain Motor Graders {3168, 4343, 5063, 5705, 7000}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 360-2987 CONTROL GROUP - JOYSTICK ON CERTAIN 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Service Magazine
