233-3145 CONTROL & MTG GP-IMPLEMENT S/N B9D1-3499 PART OF 254-5399 CAB AR 140M MOTOR GRADER

ELECTRICAL AND STARTING SYSTEM

ELECTRONICS GP-IMPLEMENT

0. 233-3145 CONTROL &

ELECTRONICS GP-POWER TRAIN

1. 238-8808 CONTROL &

CONTROL GP

2. 435-2072 CONTROL AR
3. 458-2072 CONTROL AR
4. 483-2354 CONTROL AR

ELECTRONICS GP-COMMUNICATION

5. 417-4722 CONTROL GP
6. 456-3346 CONTROL GP
7. 456-3347 CONTROL GP
8. 456-3348 CONTROL GP
9. 459-0786 CONTROL GP
0. INFORMATION

MOTOR GRADER 140M MOTOR GRADER B9D
140M Motor Grader B9D00001-UP (MACHINE) SEBP4976 140M B9D (2007)

ELECTRICAL AND STARTING SYSTEM

ELECTRONICS GP-IMPLEMENT

233-3145 CONTROL & MTG GP-IMPLEMENT

250-9257 ELECTRONICS GP-IMPLEMENT

250-9258 ELECTRONICS GP-IMPLEMENT

250-9259 ELECTRONICS GP-IMPLEMENT

311-8592 ELECTRONICS GP-IMPLEMENT

#SEBP49760410

233-3145: CONTROL & MTG GP-IMPLEMENT

CONTROL & MTG GP-IMPLEMENT

233-3145 CONTROL & MTG GP-IMPLEMENT
S/N B9D1-3499
PART OF 254-5399 CAB AR

i02775589 SEBP4976

2333145 CONTROL & MTG GP-IMPLEMENT Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-1418	[8]	SPACER (8.2X12.7X28.7-MM THK)
2.	8T-9655	[16]	MOUNT-ISOLATION
3.	324-8176	[1]	BRACKET
4.	275-8969 Y	[1]	CONTROL GP-UNPROGRAMMED (IMPLEMENT 2)
5.	275-8970 Y	[1]	CONTROL GP-UNPROGRAMMED (IMPLEMENT 1)
6.	7X-0818 M	[8]	BOLT (M8X1.25X45-MM)
7.	5P-4116	[8]	WASHER-HARD (8.8X20.5X2-MM THK)
8.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49760411

238-8808: CONTROL & MTG GP-POWER TRAIN

CONTROL & MTG GP-POWER TRAIN

238-8808 CONTROL & MTG GP-POWER TRAIN -ALL WHEEL DRIVE
S/N B9D1-UP
PART OF 261-0153 AXLE AR-FRONT

i02785764 SEBP4976

2388808 CONTROL & MTG GP-POWER TRAIN Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
3.	8T-9655	[8]	MOUNT-ISOLATION
4.	110-6109	[2]	KNOB-CONTROL (AWD MODE)
5.	114-6658	[3]	WASHER (6.5X17X1-MM THK)
6.	235-6177	[1]	HARNESS AS-CONTROL (ALL WHEEL DRIVE)
	3S-2093	[4]	STRAP-CABLE
	186-3735	[18]	PIN-CONNECTOR (16-GA TO 18-GA)
	186-3736	[23]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[101]	PLUG-SEAL
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3402	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-7143	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	126-1766	[37]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	126-1768	[10]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1774	[2]	COVER-CONNECTOR
	2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	147-1446	[1]	PLUG AS-CONNECTOR (70-PIN)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7.	238-8809 Y	[1]	SWITCH GP-ALL WHEEL DRIVE
8.	242-3282	[1]	LAMP AS-LED (24-VOLT, RED)
9.	250-2299	[1]	LAMP AS-LED (24-VOLT, GREEN)
10.	297-4156	[1]	PANEL-COVER
11.	276-8488	[1]	FILM-INSTRUCTION (ALL WHEEL DRIVE)
12.	297-4159	[1]	PLATE AS
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	304-5687	[1]	CONTROL GP-UNPROGRAMMED (ALL WHEEL DRIVE)
15.	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
16.	250-9260 Y	[1]	ELECTRONICS GP-POWER TRAIN (ALL WHEEL DRIVE)
17.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
18.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
19.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
20.	7X-0818 M	[4]	BOLT (M8X1.25X45-MM)
21.	9X-2045 M	[3]	SCREW-TRUSS HEAD (M6X1X20-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP49760412

435-2072: CONTROL AR-ELECTRIC

CONTROL AR-ELECTRIC

435-2072 CONTROL AR-ELECTRIC -AUTO ARTICULATION
S/N B9D1-UP
PART OF 492-0730 OPTION AR-GRADE CONTROL

i05811521 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
435-8660	[1]	CONFIGURATION-PREMIUM
		(DLR INSTALL CONFIG: SEE IRM: EES03-01)
419-0845	[1]	SWITCH AS-ROCKER (AUTO ARTICULATION)

#SEBP49760413

458-2072: CONTROL AR-ELECTRIC

CONTROL AR-ELECTRIC

458-2072 CONTROL AR-ELECTRIC
S/N B9D1-UP
ANTI BOUNCE
PART OF 492-0730 OPTION AR-GRADE CONTROL

i06280819 SEBP4976

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
457-5046 Y	[1]	SENSOR & MOUNTING GP

461-9801 J	[1]	CONFIGURATION-PREMIUM
J		DLR INSTALL CONFIG: SEE IRM: EES03-01
Y		SEPARATE ILLUSTRATION

#SEBP49760414

483-2354: CONTROL AR-ELECTRIC

CONTROL AR-ELECTRIC

483-2354 CONTROL AR-ELECTRIC -AUTO ARTICULATION
S/N B9D1-UP
CANNOT BE USED WITH @@@@@435-2072@@@@@

i06636216 SEBP4976

4832354 CONTROL AR-ELECTRIC Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	419-0845	[1]	SWITCH AS-ROCKER (AUTO ARTICULATION)
2.	481-7206	[1]	FILM-IDENTIFICATION (AUTO ARTICULATION)

	435-8660 FJ	[1]	CONFIGURATION-PREMIUM
	F		NOT SHOWN
	J		DLR INSTALL CONFIG: SEE IRM: EES03-01

#SEBP49760415

417-4722: CONTROL GP-COMMUNICATION

CONTROL GP-COMMUNICATION

417-4722 CONTROL GP-COMMUNICATION -NETWORK MANAGER
S/N B9D1-UP
PART OF 463-9613 APPLICATION GP-MONITOR

i06139639 SEBP4976

4174722 CONTROL GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	459-0786 Y	[1]	CONTROL GP-COMMUNICATION (NETWORK MANAGER)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP49760416

456-3346: CONTROL GP-COMMUNICATION

CONTROL GP-COMMUNICATION

456-3346 CONTROL GP-COMMUNICATION -SATELLITE
S/N B9D1-UP
PART OF 463-5584 CONTROL GP-ELECTRONIC

i06139632 SEBP4976

4563346 CONTROL GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	8C-5607	[8]	MOUNT-ISOLATION
3.	385-5989	[1]	HARNESS AS-CHASSIS
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2256	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	237-0336	[1]	COVER (CONNECTOR)
	359-5179	[1]	PLUG AS-CONNECTOR (14-PIN)
	374-7468	[2]	CAP-SEAL
	8T-8737	[57]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[70]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[70]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	134-2540	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	9X-3401	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[11]	PIN-CONNECTOR (14-GA TO 16-GA)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
4.	558-6550	[1]	ANTENNA AS
	361-1045	[1]	NUT-SPECIAL (5/8-18-THD)
	460-4049	[1]	CAP AS (CONNECTOR)(CONNECTOR)
5.	448-2602	[1]	COVER
6.	373-8970	[1]	CABLE AS-COMMUNICATION
7.	463-9613 Y	[1]	APPLICATION GP-MONITOR (PLE601 NETWORK MANAGER)
8.	463-9615 Y	[1]	APPLICATION GP-MONITOR (PRODUCT LINK 631 SATELLITE)
9.	156-6175	[1]	CLIP (LADDER)
10.	344-5673 M	[8]	NUT (M6X1-THD)
11.	4P-7428	[1]	CLIP (LADDER)
12.	5P-4115	[5]	WASHER-HARD (7.2X19X2-MM THK)
13.	7X-2535 M	[7]	BOLT (M6X1X60-MM)
14.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
15.	8T-3844 M	[1]	BOLT (M6X1X70-MM)
16.	8T-4138 M	[5]	BOLT (M6X1X20-MM)
17.	9X-2038	[1]	WASHER (7X19X2-MM THK)
18.	9X-6165	[8]	WASHER (6.5X22X2.5-MM THK)
19.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49760417

456-3347: CONTROL GP-COMMUNICATION

CONTROL GP-COMMUNICATION

456-3347 CONTROL GP-COMMUNICATION -CELLULAR
S/N B9D1-UP
PART OF 463-5585 CONTROL GP-ELECTRONIC

i06139633 SEBP4976

4563347 CONTROL GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-5607	[8]	MOUNT-ISOLATION
2.	385-5989	[1]	HARNESS AS-CHASSIS
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2256	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE(S) & INTERFACE SEAL)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	237-0336	[1]	COVER (CONNECTOR)
	359-5179	[1]	PLUG AS-CONNECTOR (14-PIN)
	374-7468	[2]	CAP-SEAL
	8T-8737	[57]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[70]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[70]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	134-2540	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	9X-3401	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[11]	PIN-CONNECTOR (14-GA TO 16-GA)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
3.	448-2602	[1]	COVER
4.	463-9613 Y	[1]	APPLICATION GP-MONITOR (PLE601 NETWORK MANAGER)
5.	463-9614 Y	[1]	APPLICATION GP-MONITOR (PL641I CELLULAR)
6.	156-6175	[1]	CLIP (LADDER)
7.	344-5673 M	[8]	NUT (M6X1-THD)
8.	3S-2093	[4]	STRAP-CABLE
9.	4P-7428	[1]	CLIP (LADDER)
10.	5P-4115	[5]	WASHER-HARD (7.2X19X2-MM THK)
11.	7X-2535 M	[7]	BOLT (M6X1X60-MM)
12.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
13.	8T-3844 M	[1]	BOLT (M6X1X70-MM)
14.	8T-4138 M	[5]	BOLT (M6X1X20-MM)
15.	9X-2038	[1]	WASHER (7X19X2-MM THK)
16.	9X-6165	[8]	WASHER (6.5X22X2.5-MM THK)
17.	9X-8256	[3]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49760418

456-3348: CONTROL GP-COMMUNICATION

CONTROL GP-COMMUNICATION

456-3348 CONTROL GP-COMMUNICATION -DUAL
S/N B9D1-UP
PART OF 463-5586 CONTROL GP-ELECTRONIC

i06139635 SEBP4976

4563348 CONTROL GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	8C-5607	[8]	MOUNT-ISOLATION
3.	385-5989	[1]	HARNESS AS-CHASSIS
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2256	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE(S) & INTERFACE SEAL)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	237-0336	[1]	COVER (CONNECTOR)
	359-5179	[1]	PLUG AS-CONNECTOR (14-PIN)
	374-7468	[2]	CAP-SEAL
	8T-8737	[57]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[70]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[70]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	134-2540	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	9X-3401	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[11]	PIN-CONNECTOR (14-GA TO 16-GA)
	147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
4.	443-8462	[1]	ANTENNA AS (CELLULAR)
	361-1045	[1]	NUT-SPECIAL (5/8-18-THD)
	385-8201	[1]	CAP AS-CONNECTOR
5.	448-2602	[1]	COVER
6.	373-8970	[2]	CABLE AS-COMMUNICATION
7.	463-9613 Y	[1]	APPLICATION GP-MONITOR (PLE601 NETWORK MANAGER)
8.	463-9614 Y	[1]	APPLICATION GP-MONITOR (PL641I CELLULAR)
9.	463-9615 Y	[1]	APPLICATION GP-MONITOR (PRODUCT LINK 631 SATELLITE)
10.	156-6175	[1]	CLIP (LADDER)
11.	344-5673 M	[12]	NUT (M6X1-THD)
12.	4P-7428	[1]	CLIP (LADDER)
13.	5P-4115	[5]	WASHER-HARD (7.2X19X2-MM THK)
14.	7X-2535 M	[11]	BOLT (M6X1X60-MM)
15.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
16.	8T-3844 M	[1]	BOLT (M6X1X70-MM)
17.	8T-4138 M	[5]	BOLT (M6X1X20-MM)
18.	9X-2038	[1]	WASHER (7X19X2-MM THK)
19.	9X-6165	[8]	WASHER (6.5X22X2.5-MM THK)
20.	9X-8256	[7]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49760419

459-0786: CONTROL GP-COMMUNICATION

CONTROL GP-COMMUNICATION

459-0786 CONTROL GP-COMMUNICATION
S/N B9D1-UP
PART OF 463-9613 APPLICATION GP-MONITOR, 417-4722 CONTROL GP-COMMUNICATION

i06574299 SEBP4976

4590786 CONTROL GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	175-4168	[12]	SCREW-PAN HEAD (6-32X0.37-IN)
2.	272-2379	[1]	FILM-WARNING (EXPLOSION HAZARD, READ OMM)
3.	7X-6315	[1]	STRAP AS-GROUND
	5P-6006 D		TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)
	2L-8078	[1]	TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
4.	8C-8514	[1]	SCREW-MACHINE (8-32X0.375-IN)
5.	134-4126	[1]	WASHER (4.52X8.28X0.76-MM THK)
	D		ORDER BY THE METER

Information:

ELECTRICAL AND STARTING SYSTEM

ELECTRONICS GP-IMPLEMENT

Operation and Maintenance Manual

Welding on Machines and Engines with Electronic Controls
140M Motor Grader

Special Instruction

Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610}
Procedure to Use a Machine Electronic Control Module (ECM) for Machine Testing{7610}

Procedure for Downloading Motor Grader Electronic Steering Event Data Files in Caterpillar Electronic Technician (Cat® ET){0785, 4300, 7610}
Procedure for Downloading Motor Grader Electronic Steering Event Data Files in Caterpillar Electronic Technician (Cat^® ET){0785, 4300, 7610}

Rework Procedure to Accommodate a Single Articulation Angle Position Sensor on Certain M-Series and M-Series 2 Motor Graders.{4806, 7610}
Rework Procedure to Accommodate a Single Articulation Angle Position Sensor on Certain M-Series and M-Series 2 Motor Graders.{4806, 7610}

Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ^® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR FLASHING NEW IMPLEMENT, TRANSMISSION/CHASSIS, MONITOR, AND ALL WHEEL DRIVE SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR FLASHING NEW IMPLEMENT, TRANSMISSION/CHASSIS, MONITOR, AND ALL WHEEL DRIVE SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR FLASHING NEW SOFTWARE AND INSTALLING HYDRAULIC COMPONENTS ON CERTAIN 120M, 12M, 140M, 160M AND 14M MOTOR GRADERS TO IMPROVE THE PERFORMANCE OF THE STEERING, BRAKING, AND TRANSMISSION SYSTEMS ALONG WITH OTHER MULTIPLE MACHINE ENHANCEMENTS
PRODUCT IMPROVEMENT PROGRAM FOR FLASHING NEW SOFTWARE AND INSTALLING HYDRAULIC COMPONENTS ON CERTAIN 120M, 12M, 140M, 160M AND 14M MOTOR GRADERS TO IMPROVE THE PERFORMANCE OF THE STEERING, BRAKING, AND TRANSMISSION SYSTEMS ALONG WITH OTHER MULTIPLE MACHINE ENHANCEMENTS

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW SOFTWARE AND CERTAIN HARDWARE COMPONENTS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW SOFTWARE AND CERTAIN HARDWARE COMPONENTS ON CERTAIN 140M AND 160M MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW SOFTWARE AND A NEW OPERATION AND MAINTENANCE MANUAL ON CERTAIN 120M, 12M, 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW SOFTWARE AND A NEW OPERATION AND MAINTENANCE MANUAL ON CERTAIN 120M, 12M, 140M, 160M, AND 14M MOTOR GRADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Compatibility with Software for Electronic Control Modules{7620}
Compatibility with Software for Electronic Control Modules{7620}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Features
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Data Link
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Features
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Service Letter-APD

Testing and Adjusting

Position Sensor (Steering Cylinder) - Set
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Electronic Control Module (ECM) - Replace
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

New Steering Cylinder Group - Set
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Calibration
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Electronic Control Module (ECM) - Configure
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Electronic Control Module (ECM) - Flash Program
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Auxiliary Hydraulic System - Configure
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Troubleshooting

MID 027 - CID 0596 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 082 - CID 0967 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0967 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2650 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2650 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2650 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2202 - FMI 12
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 1558 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2203 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2203 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 2199 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2199 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2199 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Diagnostic Code List
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Event Code List
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

General Information
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Diagnostic Capabilities
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0247 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0247 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0248 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0248 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2143 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 0596 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 082 - CID 2954 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 0596 - FMI 12
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 145 - CID 0248 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 145 - CID 0248 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 145 - CID 1960 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 053 - CID 0596 - FMI 09
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

MID 053 - CID 0596 - FMI 14
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

MID 053 - CID 1558 - FMI 09
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

MID 053 - CID 1558 - FMI 14
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

MID 082 - CID 0246 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0246 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2203 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2203 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Service Magazine

M-Series Motor Grader Shipping Mode {5701, 7590, 7610, 7620}
2007/07/30

New Software is Now Available {7620}
2007/12/31

New AccuGrade® Software Is Now Available {7220, 7620}
2008/05/05

New Software For The AccuGrade® Electric Mast Is Now available {7620, 79NS}
2008/05/19

New Machine Software is Now Used {7620}
2009/01/26

M Series Motor Grader Software Updates Are Now Used {7620}
2009/09/28

Blade Lift Modulation that is Selectable is Available {5063, 5102, 7300, 7451, 7610, 7620}
2009/09/07

New Software is Now Available For Certain M-Series Motor Graders {7610, 7620}
2009/12/25

Improved Monitoring System Is Now Used for the Steering System on M-Series Motor Graders {509T, 7490, 7620}
2009/11/24

A New Parameter Is Now Used for Selecting the Hydraulic Oil Type on M-Series Motor Grader {509T, 7490, 7620}
2009/11/24

New Software Is Now Used for the Steering System on M-Series Motor Grader {509T, 7490, 7620}
2009/11/24

New Software Is Now Used for the M-Series Motor Grader {7620}
2010/03/22

Compatibility of Implement Software and Power Train Software on M-Series Motor Graders {7620}
2010/03/31

New Software Is Now Used On M-Series Motor Graders {7620}
2010/10/29

New Software Is Now Used on Series M Motor Graders {1920, 7620}
2010/11/15

An Improved Procedure for Using an ECM for a Machine Test Is Now Available {7610}
2011/01/12

New Software Is Now Used On Certain M Series Motor Graders {1920, 7620}
2011/10/17

Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/04/08

New Software Is Now Used on Certain M Series Motor Graders {7620}
2012/05/18

New Software Is Now Used on Certain M Series Motor Graders {7620}
2012/08/13

New Software Is Now Used on Certain M Series and M Series 2 Motor Graders {7620}
2012/09/10

New Software Is Now Used On Certain M-Series Motor Graders and M-Series 2 Motor Graders {4808, 7610, 7620}
2012/10/10

New Software Is Now Used on Certain M Series and M Series II Motor Graders {7620}
2012/12/06

Guidelines For Performing Welding Procedures On Certain M-Series Motor Graders {7000}
2013/05/22

New Software Is Now Used On Certain M-Series Motor Graders {1920, 7620}
2013/08/23

Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

New Software Is Now Used on Certain Cat® Products {1920, 7620}
2014/06/30

New Software Is Now Used On Certain M-Series Motor Graders {1920, 7620}
New Software Is Now Used On Certain M-Series Motor Graders {1920, 7620}

New Software Is Now Used On Certain M Series Motor Graders {1920, 7620}
2014/12/19

New Software is Now Used on Certain M Series Motor Graders and the 14L Motor Grader {7620}
2015/09/22

Caterpillar Parts SIS Catalog 140M :

334-3855 CONTROL & MTG GP-ENGINE ELEK

246-9365 CONTROL & MTG GP-ENGINE ELEK

246-9345 CONTROL & MTG GP-ENGINE ELEK

391-4396 CAMERA AR

278-1842 CAMERA AR

236-1924 BATTERY & WIRING GP

233-4611 BATTERY & WIRING GP

233-4603 BATTERY & WIRING GP

238-8808 CONTROL & MTG GP-POWER TRAIN

435-2072 CONTROL AR-ELECTRIC

458-2072 CONTROL AR-ELECTRIC

483-2354 CONTROL AR-ELECTRIC

417-4722 CONTROL GP-COMMUNICATION

456-3346 CONTROL GP-COMMUNICATION

456-3347 CONTROL GP-COMMUNICATION

456-3348 CONTROL GP-COMMUNICATION

Truck sale:

176,000

Caterpillar 140M2, Construction
- motor graders
HOLT CAT

164,000

Caterpillar 140M2, Construction
- motor graders
HOLT CAT

139,800

Caterpillar 140M2, Construction
- motor graders
FOLEY EQUIPMENT COMPANY

Caterpillar TRADE-IN 140M2, Construction
- motor graders
TRACTORS AND EQUIPMENT (I.T.E.) LTD.
Israel

167,614

Caterpillar 140M2, Construction
- motor graders
CAVPOWER
Australia