HYDRAULIC SYSTEM
CYLINDER GPDRIVE GP
FILTER GP
HYDRAULIC SYSTEM
CYLINDER GP#SEBP49761280
389-6062: CYLINDER GP-STEERING
389-6062 CYLINDER GP-STEERING
S/N B9D4519-UP
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 390-0593 CYLINDER & MTG GP-STEERING
Type 1
S/N B9D4519-UP
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 390-0593 CYLINDER & MTG GP-STEERING
Type 1
Parts for your 140M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4T-5613 J | [1] | RING-WEAR | |
2. | 6J-1972 J | [1] | SEAL AS | |
3. | 6J-5731 J | [1] | RING-BACKUP | |
4. | 151-7038 | [1] | HEAD | |
5. | 217-3312 | [1] | MAGNET | |
6. | 223-3353 J | [1] | RING-WEAR | |
7. | 289-2935 J | [1] | SEAL AS-BUFFER | |
8. | 289-2946 J | [1] | SEAL-U-CUP | |
9. | 308-1845 J | [1] | SEAL-WIPER | |
10. | 350-3842 M | [2] | SETSCREW (M8X1.25X12.3-MM) | |
11. | 451-2628 | [1] | SENSOR GP-POSITION (LINEAR)(STEERING CYLINDER) | |
118-8586 J | [1] | SEAL-O-RING | ||
420-5767 J | [1] | RING-BACKUP | ||
12. | 376-8250 | [1] | SPRING-WAVE | |
13. | 383-7670 | [1] | PISTON | |
14. | 389-6077 | [1] | CYLINDER AS-STEERING | |
289-6002 | [1] | ELBOW AS | ||
1N-5999 | [2] | PLUG-O-RING | ||
7J-0204 | [2] | SEAL-O-RING | ||
15. | 449-5422 | [1] | ROD AS | |
16. | 435-3388 | [1] | RECEPTACLE AS | |
17. | 109-1393 M | [3] | BOLT-SOCKET HEAD (M4X0.7X10-MM) | |
18. | 1H-7339 J | [1] | SEAL-O-RING | |
19. | 3J-7354 | [1] | SEAL-O-RING | |
20. | 5S-4455 | [1] | RING-RETAINING | |
21. | 8T-9102 M | [1] | SETSCREW-SOCKET (M5X0.8X10-MM) | |
22. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
AVAILABLE REPAIR KIT(S): | ||||
471-0161 J | [1] | KIT-HYD CYLINDER SEAL | ||
(INCLUDES RINGS, O-RINGS & SEALS) | ||||
J | KIT MARKED J SERVICED PARTS MARKED J | |||
M | METRIC PART |
#SEBP49761281
389-6062: CYLINDER GP-STEERING
389-6062 CYLINDER GP-STEERING
S/N B9D4519-UP
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 390-0593 CYLINDER & MTG GP-STEERING
Type 2
S/N B9D4519-UP
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 390-0593 CYLINDER & MTG GP-STEERING
Type 2
Parts for your 140M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4T-5613 | [1] | RING-WEAR | |
2. | 6J-1972 | [1] | SEAL AS | |
3. | 6J-5731 | [1] | RING-BACKUP | |
4. | 151-7038 | [1] | HEAD | |
5. | 217-3312 | [1] | MAGNET | |
6. | 223-3353 | [1] | RING-WEAR | |
7. | 289-2935 | [1] | SEAL AS-BUFFER | |
8. | 289-2946 | [1] | SEAL-U-CUP | |
9. | 308-1845 | [1] | SEAL-WIPER | |
10. | 350-3842 M | [2] | SETSCREW (M8X1.25X12.3-MM) | |
11. | 451-2628 | [1] | SENSOR GP-POSITION (LINEAR)(STEERING CYLINDER) | |
118-8586 | [1] | SEAL-O-RING | ||
420-5767 | [1] | RING-BACKUP | ||
12. | 376-8250 | [1] | SPRING-WAVE | |
13. | 383-7670 | [1] | PISTON | |
14. | 389-6077 | [1] | CYLINDER AS-STEERING | |
289-6002 | [1] | ELBOW AS | ||
1N-5999 | [2] | PLUG-O-RING | ||
7J-0204 | [2] | SEAL-O-RING | ||
15. | 449-5422 | [1] | ROD AS | |
16. | 435-3388 | [1] | RECEPTACLE AS | |
17. | 109-1393 M | [3] | BOLT-SOCKET HEAD (M4X0.7X10-MM) | |
18. | 1H-7339 | [1] | SEAL-O-RING | |
19. | 3J-7354 | [1] | SEAL-O-RING | |
20. | 5S-4455 | [1] | RING-RETAINING | |
21. | 8T-9102 M | [1] | SETSCREW-SOCKET (M5X0.8X10-MM) | |
22. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
M | METRIC PART |
#SEBP49761282
249-5299: CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
S/N B9D1488-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.8-IN) STROKE
PART OF 260-8713 CYLINDER & MTG GP-WHEEL LEAN
S/N B9D1488-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.8-IN) STROKE
PART OF 260-8713 CYLINDER & MTG GP-WHEEL LEAN
Parts for your 140M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 251-1550 | [1] | CYLINDER AS | |
1A. | 2G-8631 | [1] | BUSHING | |
2. | 173-9683 M | [1] | BOLT (M30X3.5X90-MM) | |
3. | 9X-8399 | [1] | WASHER (33X56X6-MM THK) | |
4. | 4T-8054 J | [1] | SEAL AS | |
5. | 7J-9885 J | [1] | RING-WEAR | |
6. | 9T-9040 | [1] | PISTON | |
7. | 175-7898 J | [1] | SEAL-O-RING | |
8. | 1S-0669 J | [1] | RING (BACKUP) | |
9. | 6E-4974 | [1] | HEAD | |
308-1845 | [1] | SEAL-WIPER | ||
10. | 121-9245 | [1] | ROD AS | |
10A. | 2G-8631 | [1] | BUSHING | |
11. | 308-1845 J | [1] | SEAL-WIPER | |
12. | 356-8331 J | [1] | SEAL-U-CUP | |
13. | 289-2935 J | [1] | SEAL AS-BUFFER | |
14. | 4T-5613 J | [1] | RING-WEAR | |
AVAILABLE REPAIR KIT(S): | ||||
376-9011 J | [1] | KIT-HYD CYLINDER SEAL | ||
(INCLUDES RINGS & SEALS) | ||||
(FOR USE WITH REHS1392) | ||||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP49761283
253-4677: DRIVE GP-CIRCLE
Parts for your 140M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1B-4038 | [2] | CUP-BEARING | |
2. | 1B-4046 | [2] | CONE-BEARING | |
3. | 2G-0478 | [5] | PLATE-CLUTCH | |
4. | 2G-6695 | [1] | BRACKET | |
5. | 5K-5288 | [1] | SEAL GP-DUO-CONE | |
5K-5129 | [2] | RING-SEALING | ||
6. | 6G-5533 | [1] | GEAR-WORM (36-TEETH) | |
7. | 6G-5534 | [1] | COVER AS | |
6G-5537 | [1] | BEARING | ||
8. | 6G-5538 | [1] | COVER | |
9. | 6G-5542 | [2] | SPACER (119.2X178X9.3-MM THK) | |
10. | 6G-6122 | [1] | SPRING-DISC | |
11. | 6Y-7953 | [6] | DISC-FRICTION | |
12. | 7D-8983 B | [10] | SHIM (0.005-IN THK) | |
13. | 7D-8984 B | [6] | SHIM (0.007-IN THK) | |
14. | 8D-7423 | [1] | WASHER-SPECIAL (81.03X48.41X1.6MM THK) | |
15. | 8D-7424 | [1] | SPACER (48X81X6-MM THK) | |
16. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
17. | 312-0782 | [1] | WORM-CIRCLE DRIVE | |
18. | 9D-1491 | [1] | COUPLING | |
19. | 105-3196 Y | [1] | MOTOR GP-GEROTOR (CIRCLE DRIVE) | |
20. | 253-4678 | [1] | HOUSING AS-DRIVE | |
2D-8154 | [4] | STUD-TAPERLOCK (1/2-13X2.36-IN) | ||
8D-7426 | [1] | BUSHING | ||
160-0011 M | [4] | STUD-TAPERLOCK (M20X2.5X85-MM) | ||
21. | 261-8553 | [1] | PINION-CIRCLE DRIVE | |
22. | 307-1958 | [1] | SHAFT-PINION DRIVE | |
23. | 307-1959 B | [6] | SHIM (0.13-MM THK) | |
24. | 307-1960 B | [1] | SHIM (0.25-MM THK) | |
25. | 307-1961 | [1] | PLATE | |
26. | 307-1962 B | [4] | SHIM (0.5-MM THK) | |
27. | 0S-1585 | [4] | BOLT (1/2-13X1.5-IN) | |
28. | 1A-1415 | [1] | NUT (1-7/8-12-THD) | |
29. | 1B-5174 | [1] | PLUG-PIPE | |
30. | 1F-7958 | [4] | NUT-FULL (1/2-13-THD) | |
31. | 1H-7339 | [1] | SEAL-O-RING | |
32. | 2B-7410 | [1] | PLUG-PIPE (OIL DRAIN) | |
33. | 2H-9247 | [1] | SEAL-O-RING | |
34. | 4F-9653 | [1] | SEAL-O-RING | |
35. | 4H-6996 | [1] | PIN-SPRING | |
36. | 5H-4909 | [1] | SEAL-O-RING | |
37. | 5K-8454 | [3] | BOLT (1/2-13X1.12-IN) | |
38. | 5P-8245 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
39. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
40. | 6G-5539 | [1] | GASKET | |
41. | 6G-5548 | [1] | SPACER (69.5X89X0.8-MM THK) | |
42. | 6H-1717 | [5] | BOLT (1/2-13X1.125-IN) | |
43. | 6V-5686 M | [3] | BOLT (M16X2X50-MM) | |
44. | 8D-5054 | [3] | WASHER-HARD (17X30X3-MM THK) | |
45. | 8D-7425 | [2] | WASHER-THRUST (2.81X4.25X0.12-IN THK) | |
46. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
B | USE AS REQUIRED | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP49761284
253-4677: DRIVE GP-CIRCLE
Parts for your 140M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1B-4038 | [2] | CUP-BEARING | |
2. | 1B-4046 | [2] | CONE-BEARING | |
3. | 2G-0478 | [5] | PLATE-CLUTCH | |
4. | 2G-6695 | [1] | BRACKET | |
5. | 5K-5288 | [1] | SEAL GP-DUO-CONE | |
5K-5129 | [2] | RING-SEALING | ||
6. | 323-8674 C | [1] | GEAR-WORM (36-TEETH) | |
7. | 6G-5534 | [1] | COVER AS | |
6G-5537 | [1] | BEARING | ||
8. | 6G-5538 | [1] | COVER | |
9. | 6G-5542 | [2] | SPACER (119.2X178X9.3-MM THK) | |
10. | 6G-6122 | [1] | SPRING-DISC | |
11. | 6Y-7953 | [6] | DISC-FRICTION | |
12. | 7D-8983 B | [10] | SHIM (0.005-IN THK) | |
13. | 7D-8984 B | [6] | SHIM (0.007-IN THK) | |
14. | 8D-7423 | [1] | WASHER-SPECIAL (81.03X48.41X1.6MM THK) | |
15. | 8D-7424 | [1] | SPACER (48X81X6-MM THK) | |
16. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
17. | 323-8675 C | [1] | WORM-CIRCLE DRIVE | |
18. | 9D-1491 | [1] | COUPLING | |
19. | 105-3196 Y | [1] | MOTOR GP-GEROTOR (CIRCLE DRIVE) | |
20. | 253-4678 | [1] | HOUSING AS-DRIVE | |
2D-8154 | [4] | STUD-TAPERLOCK (1/2-13X2.36-IN) | ||
8D-7426 | [1] | BUSHING | ||
286-2631 M | [4] | STUD-TAPERLOCK (M20X2.5X85-MM) | ||
21. | 261-8553 | [1] | PINION-CIRCLE DRIVE | |
22. | 307-1958 | [1] | SHAFT-PINION DRIVE | |
23. | 307-1959 B | [6] | SHIM (0.13-MM THK) | |
24. | 307-1960 B | [1] | SHIM (0.25-MM THK) | |
25. | 307-1961 | [1] | PLATE | |
26. | 307-1962 B | [4] | SHIM (0.5-MM THK) | |
27. | 0S-1585 | [4] | BOLT (1/2-13X1.5-IN) | |
28. | 1A-1415 | [1] | NUT (1-7/8-12-THD) | |
29. | 1B-5174 | [1] | PLUG-PIPE | |
30. | 1F-7958 | [4] | NUT-FULL (1/2-13-THD) | |
31. | 1H-7339 | [1] | SEAL-O-RING | |
32. | 2B-0858 | [1] | PLUG-PIPE (OIL DRAIN) | |
33. | 2H-9247 | [1] | SEAL-O-RING | |
34. | 4F-9653 | [1] | SEAL-O-RING | |
35. | 4H-6996 | [1] | PIN-SPRING | |
36. | 5H-4909 | [1] | SEAL-O-RING | |
37. | 5K-8454 | [3] | BOLT (1/2-13X1.12-IN) | |
38. | 5P-8245 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
39. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
40. | 6G-5539 | [1] | GASKET | |
41. | 6G-5548 | [1] | SPACER (69.5X89X0.8-MM THK) | |
42. | 6H-1717 | [5] | BOLT (1/2-13X1.125-IN) | |
43. | 6V-5686 M | [3] | BOLT (M16X2X50-MM) | |
44. | 8D-5054 | [3] | WASHER-HARD (17X30X3-MM THK) | |
45. | 8D-7425 | [2] | WASHER-THRUST (2.81X4.25X0.12-IN THK) | |
46. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP49761285
423-9923: DRIVE GP-CIRCLE
Parts for your 140M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1B-4038 | [2] | CUP-BEARING | |
2. | 1B-4046 | [2] | CONE-BEARING | |
3. | 2G-0478 | [5] | PLATE-CLUTCH | |
4. | 2G-6695 | [1] | BRACKET | |
5. | 5K-5288 | [1] | SEAL GP-DUO-CONE | |
5A. | 5K-5129 | [2] | RING-SEALING | |
6. | 6G-5534 | [1] | COVER AS | |
6A. | 6G-5537 | [1] | BEARING | |
7. | 6G-5538 | [1] | COVER | |
8. | 6G-5542 | [2] | SPACER (119.2X178X9.3-MM THK) | |
9. | 6G-6122 B | [1] | SPRING-DISC | |
10. | 6Y-7953 | [6] | DISC-FRICTION | |
11. | 7D-8983 B | [10] | SHIM (0.005-IN THK) | |
12. | 7D-8984 B | [6] | SHIM (0.007-IN THK) | |
13. | 457-0799 | [1] | LOCKNUT | |
14. | 8D-7424 | [1] | SPACER (48X81X6-MM THK) | |
15. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
16. | 9D-1491 | [1] | COUPLING | |
17. | 105-3196 Y | [1] | MOTOR GP-GEROTOR (CIRCLE DRIVE) | |
18. | 253-4678 | [1] | HOUSING AS-DRIVE | |
18A. | 8D-7426 | [1] | BUSHING | |
2D-8154 | [4] | STUD-TAPERLOCK (1/2-13X2.36-IN) | ||
286-2631 M | [4] | STUD-TAPERLOCK (M20X2.5X85-MM) | ||
19. | 307-1959 B | [6] | SHIM (0.13-MM THK) | |
20. | 307-1960 B | [1] | SHIM (0.25-MM THK) | |
21. | 307-1961 | [1] | PLATE | |
22. | 307-1962 B | [4] | SHIM (0.5-MM THK) | |
23. | 323-8674 | [1] | GEAR-WORM (36-TEETH) | |
24. | 323-8675 | [1] | WORM-CIRCLE DRIVE | |
25. | 458-3867 | [1] | SHAFT-DRIVE | |
26. | 458-3868 | [1] | PINION-CIRCLE DRIVE | |
27. | 0S-1585 | [4] | BOLT (1/2-13X1.5-IN) | |
28. | 1A-1415 | [1] | NUT (1-7/8-12-THD) | |
29. | 1B-5174 | [1] | PLUG-PIPE | |
30. | 1F-7958 | [4] | NUT-FULL (1/2-13-THD) | |
31. | 1H-7339 | [1] | SEAL-O-RING | |
32. | 2B-0858 | [1] | PLUG-PIPE | |
33. | 2H-3935 | [1] | SEAL-O-RING | |
34. | 2B-8293 | [1] | SEAL-O-RING | |
35. | 4H-6996 | [1] | PIN-SPRING | |
36. | 5H-4909 | [1] | SEAL-O-RING | |
37. | 5K-8454 | [3] | BOLT (1/2-13X1.12-IN) | |
38. | 5P-8245 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
39. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
40. | 6G-5539 | [1] | GASKET | |
41. | 6G-5548 | [1] | SPACER (69.5X89X0.8-MM THK) | |
42. | 6H-1717 | [5] | BOLT (1/2-13X1.125-IN) | |
43. | 6V-5686 M | [3] | BOLT (M16X2X50-MM) | |
44. | 8D-5054 | [3] | WASHER-HARD (17X30X3-MM THK) | |
45. | 8D-7425 | [2] | WASHER-THRUST (2.81X4.25X0.12-IN THK) | |
46. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
B | USE AS REQUIRED | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP49761286
250-3507: FILTER & MTG GP-HYDRAULIC
250-3507 FILTER & MTG GP-HYDRAULIC
S/N B9D1-UP
PART OF 231-5061 SERVICE CENTER AR
S/N B9D1-UP
PART OF 231-5061 SERVICE CENTER AR
Parts for your 140M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 148-8407 | [1] | PLUG AS | |
9S-4191 | [1] | PLUG (9/16-18-THD) | ||
3J-1907 | [1] | SEAL-O-RING | ||
3. | 242-0407 | [1] | VALVE AS-DRAIN (HYDRAULIC FILTER) | |
4. | 245-7603 | [1] | TUBE AS | |
5. | 245-8964 | [1] | BLOCK | |
6. | 249-2307 Y | [1] | FILTER GP-OIL (HYDRAULIC TANK RETURN) | |
7. | 257-8897 | [1] | HOSE-MOLDED | |
8. | [2] | PLUG AS | ||
(EACH INCLUDES) | ||||
9S-4183 | [1] | PLUG (1-1/16-12-THD) | ||
3D-2824 | [1] | SEAL-O-RING | ||
9. | 156-4283 | [1] | CONNECTOR AS | |
8T-7926 | [1] | CONNECTOR | ||
6K-6307 | [1] | SEAL-O-RING | ||
8T-0315 | [1] | SEAL-O-RING | ||
10. | 294-9701 | [1] | TUBE AS | |
11. | 294-9702 | [1] | TUBE AS | |
12. | 4J-0524 | [2] | SEAL-O-RING | |
13. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
14. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
15. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
16. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
17. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
18. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
19. | 8T-6703 | [4] | CLAMP-HOSE | |
20. | 8X-5489 | [1] | SLEEVE | |
21. | 122-6908 G | HOSE-HYDRAULIC (6.3-IN) | ||
22. | 9X-2023 E | HOSE (31-CM) | ||
E | ORDER BY THE CENTIMETER | |||
G | ORDER BY THE INCH | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP49761287
191-9784: FILTER GP-OIL
191-9784 FILTER GP-OIL -STEERING LINES
S/N B9D1-UP
PART OF 237-6423, 355-0117, 473-0556 LINES GP-PUMP
S/N B9D1-UP
PART OF 237-6423, 355-0117, 473-0556 LINES GP-PUMP
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP49761288
249-2307: FILTER GP-OIL
249-2307 FILTER GP-OIL -HYDRAULIC TANK RETURN
S/N B9D1-UP
INTERNAL BYPASS
PART OF 250-3507 FILTER & MTG GP-HYDRAULIC
Type 1
S/N B9D1-UP
INTERNAL BYPASS
PART OF 250-3507 FILTER & MTG GP-HYDRAULIC
Type 1
Parts for your 140M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1R-1809 | [1] | FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC TANK) | |
2. | 241-3352 | [1] | HOUSING AS (OIL FILTER) | |
3J-1907 | [1] | SEAL-O-RING | ||
9S-8004 | [1] | PLUG (9/16-18-THD) | ||
3. | 249-2308 Y | [1] | BASE GP-OIL FILTER (INTERNAL BYPASS) | |
4. | 3J-1907 | [1] | SEAL-O-RING | |
5. | 3J-7354 | [1] | SEAL-O-RING | |
6. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
7. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
8. | 130-0229 | [1] | SEAL-O-RING | |
9. | 316-5366 | [1] | RING-BACKUP | |
Y | SEPARATE ILLUSTRATION |
#SEBP49761289
249-2307: FILTER GP-OIL
249-2307 FILTER GP-OIL -HYDRAULIC TANK RETURN
S/N B9D1-UP
INTERNAL BYPASS
PART OF 250-3507 FILTER & MTG GP-HYDRAULIC
Type 2
S/N B9D1-UP
INTERNAL BYPASS
PART OF 250-3507 FILTER & MTG GP-HYDRAULIC
Type 2
Parts for your 140M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 338-3540 | [1] | FILTER ELEMENT-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC TANK) | |
2. | 321-5967 C | [1] | HOUSING GP-FILTER (OIL) | |
9S-8004 | [1] | PLUG (9/16-18-THD) | ||
214-7568 | [1] | SEAL-O-RING | ||
3. | 249-2308 Y | [1] | BASE GP-OIL FILTER (HYDRAULIC TANK RETURN) | |
4. | 214-7568 | [1] | SEAL-O-RING | |
5. | 6V-5048 | [1] | SEAL-O-RING | |
6. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
7. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
8. | 130-0229 | [1] | SEAL-O-RING | |
8L-2786 F | [1] | SEAL-O-RING | ||
C | CHANGE FROM PREVIOUS TYPE | |||
F | NOT SHOWN | |||
Y | SEPARATE ILLUSTRATION |
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
MANUAL INSTALLATION OF STEERING CYLINDER POSITION SENSOR SETUP PARAMETERS{430S}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 140M AND 160M ALL WHEEL DRIVE MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 140M AND 160M ALL WHEEL DRIVE MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 140M AND 160M ALL WHEEL DRIVE MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 140M AND 160M ALL WHEEL DRIVE MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 140M AND 160M ALL WHEEL DRIVE MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 140M AND 160M ALL WHEEL DRIVE MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
Technical Information Bulletin
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
The "2007A Version 1.1" of CAT ET is Unable to Read Cylinder Trim Files{0785, 4303}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER BOOTS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS (NON ALL WHEEL DRIVE)
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO REWORK THE POWER SUPPLY CIRCUIT FOR THE RIGHT STEERING CYLINDER POISITION SENSOR ON CERTAIN 12M, 140M, 14L, AND 160M MOTOR GRADERS
Testing and Adjusting
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Troubleshooting
MID 082 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 027 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Disassembly and Assembly
Service Magazine
Blade Lift Modulation that is Selectable is Available {5063, 5102, 7300, 7451, 7610, 7620}
2009/09/07
2009/09/07
Optional Guards are Now Available for Certain M Series and M Series 2 Motor Graders {7164}
2011/11/07
2011/11/07
Steering Cylinder Bearing Bore Specifications Have Been Updated on Certain Motor Graders {4303}
2011/12/23
2011/12/23
An Improved Blade Tip Hydraulic Cylinder Group Is Now Used on Certain M Series Motor Graders {7562}
2014/09/29
2014/09/29
New Shear Pin for Circle Group Is Now Available for Certain Motor Graders Used in Snow Removal Applications {5106}
New Shear Pin for Circle Group Is Now Available for Certain Motor Graders Used in Snow Removal Applications {5106}
New Shear Pin for Circle Group Is Now Available for Certain Motor Graders Used in Snow Removal Applications {5106}
The Assembly Procedure For The Blade Lift Cylinder Has Been Improved On Certain Motor Graders {5102}
2015/02/27
2015/02/27
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}