AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

524-8603 EXTENSION GP-BLADE S/N B9D1-UP BLADE EXTENSION ATTACHMENT KIT 140M MOTOR GRADER


WORK TOOLS
BLADE GP
HYDRAULIC SYSTEM
LIFT GP
WORK TOOLS
BLADE GP
RIPPER GP

MOTOR GRADER 140M MOTOR GRADER B9D
 140M Motor Grader B9D00001-UP (MACHINE) SEBP4976 140M B9D   (2007)

WORK TOOLS

BLADE GP
EXTENSION GP-BLADE
452-3132 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3133 EXTENSION GP-BLADE
524-8603 EXTENSION GP-BLADE
524-8604 EXTENSION GP-BLADE
LIFT GP-BLADE
261-8536 LIFT GP-BLADE
LIFT GP-BLADE
296-3008 LIFT GP-BLADE
 

#SEBP49761790
 

524-8603: EXTENSION GP-BLADE

524-8603 EXTENSION GP-BLADE
S/N B9D1-UP
BLADE EXTENSION ATTACHMENT KIT
i06922559 SEBP4976
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  452-3137 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  232-2146 [1] EDGE-CUTTING  
  250-0613 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  452-3135 [1] PLATE AS  
  110-5334 [2] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP49761791
 

524-8604: EXTENSION GP-BLADE

524-8604 EXTENSION GP-BLADE
S/N B9D1-UP
BLADE ATTACHMENT KIT
i06922561 SEBP4976
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  452-3137 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-2165 [1] EDGE-CUTTING  
  133-7524 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  452-3134 [1] PLATE AS  
  110-5334 [3] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP49761792
 

261-8536: LIFT GP-BLADE

261-8536 LIFT GP-BLADE
S/N B9D1-1703
PART OF 234-7721 COMMON AR
i02780365 SEBP4976
2618536 LIFT GP-BLADE Parts scheme 2618536 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
7. 8X-5106 [1] STUD-BALL  
8. 8X-5107 [1] PIN  
9. 8X-5109 [1] BAR AS  
  8X-5108 [2] BUSHING  
  124-5836 [5] BUSHING  
10. 123-8187 B [2] WASHER-THRUST (76.6X146X1-MM THK)  
11. 201-8034 M [6] BOLT (M20X2.5X120-MM)  
12. 259-2627 M [4] BOLT (M12X1.75X40-MM)  
13. 259-4483 [2] PIN  
14. 259-4492 [2] LOCK  
15. 261-8537 [1] ARM AS (LH)  
  7D-8889 [1] BEARING (76.35-MM ID)  
  8D-8168 [1] BEARING (63.65-MM ID)  
16. 261-8538 [1] ARM AS (RH)  
  7D-8889 [1] BEARING (76.35-MM ID)  
  8D-8168 [1] BEARING (63.65-MM ID)  
17. 261-8541 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
18. 261-8543 [2] RETAINER  
19. 261-8545 [1] PLATE  
20. 261-8547 [2] LOCK  
21. 288-0735 M [1] BOLT (M12X1.75X60-MM)  
22. 112-3926 M [4] BOLT (M20X2.5X110-MM)  
23. 267-3508 [16] WASHER-HARD (22X35X3.5-MM THK)  
24. 279-6632 [5] WASHER (13.5X25.5X3-MM THK)  
25. 286-0742 M [6] NUT (M20X2.5-THD)  
26. 3P-1461 [4] SEAL-LIP TYPE  
27. 5F-0149 [2] SEAL-O-RING  
28. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
29. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
30. 7D-8883 [2] SEAL  
31. 7D-8884 [2] SEAL  
32. 7H-2444 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49761793
 

296-3008: LIFT GP-BLADE

296-3008 LIFT GP-BLADE
S/N B9D1704-UP
PART OF 234-7721, 349-2551 COMMON AR
i03304403 SEBP4976
2963008 LIFT GP-BLADE Parts scheme 2963008 LIFT GP-BLADE Parts scheme 2963008 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
7. 8X-5106 [1] STUD-BALL  
8. 8X-5107 [1] PIN  
9. 381-0356 [1] BAR AS-LINK  
9A. 8X-5108 [2] BUSHING  
9B. 382-4604 [7] BUSHING  
10. 123-8187 B [6] WASHER-THRUST (76.6X146X1-MM THK)  
11. 201-8034 M [6] BOLT (M20X2.5X120-MM)  
12. 8T-0558 M [4] BOLT-SELF-LOCKING (M12X1.75X50-MM)  
13. 259-4483 [2] PIN  
14. 259-4492 [2] LOCK  
15. 296-3004 [1] ARM AS-LIFT (LH)  
15A. 7D-8889 [1] BEARING (76.35-MM ID)  
15B. 8D-8168 [1] BEARING (63.65-MM ID)  
16. 296-3005 [1] ARM AS-LIFT (RH)  
16A. 7D-8889 [1] BEARING (76.35-MM ID)  
16B. 8D-8168 [1] BEARING (63.65-MM ID)  
17. 261-8541 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
18. 261-8543 [2] RETAINER  
19. 261-8545 [1] PLATE  
20. 261-8547 [2] LOCK  
21. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
22. 112-3926 M [4] BOLT (M20X2.5X110-MM)  
23. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
24. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4131 M [6] NUT (M20X2.5-THD)  
26. 3P-1461 [4] SEAL-LIP TYPE  
27. 5F-0149 [2] SEAL-O-RING  
28. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
29. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
30. 7D-8883 [2] SEAL  
31. 7D-8884 [2] SEAL  
32. 7H-2444 [2] SEAL-O-RING  
33. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49761794
 

293-5556: LIFT GP-WORK TOOL

293-5556 LIFT GP-WORK TOOL
S/N B9D1-UP
PART OF 312-2204 LIFT GP-WORK TOOL
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
i05382843 SEBP4976
2935556 LIFT GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  293-5559 FY [1] BRACE GP (WORK TOOL LIFT)  
   
1. 1F-6762 [4] BOLT (1-1/2-12X4.5-IN)  
2. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
3. 3B-8489 [11] FITTING-GREASE (1/8-27 PTF)  
4. 4H-6511 [1] BOLT (1-1/4-12X6.5-IN)  
5. 5F-9891 [4] BOLT (1-1/2-12X6-IN)  
6. 9X-2521 [8] NUT-FULL  
7. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
8. 170-4910 [1] FRAME AS-COUPLER  
9. 172-8121 [2] SPACER (34.925X60.325X14.2-MM THK)  
10. 172-8122 [2] PIN AS  
11. 172-8125 [3] PIN (SNAP)  
12. 172-8126 [1] FILM-WARNING (CRUSH HAZARD)  
13. 172-8127 [1] PIN AS (LOCKING)  
14. 172-8287 I [1] HOSE AS  
15. 172-8288 I [1] HOSE AS  
16. 194-3655 [2] BEARING GP  
17. 195-3330 [1] PLATE AS-MOUNTING  
18. 217-3501 Y [1] CYLINDER GP-HYDRAULIC (WORK TOOL LIFT)  
19. 284-7971 [1] ARM AS (LOWER)  
20. 284-7972 [1] ARM AS (UPPER)  
22. 2M-9780 [4] SEAL-O-RING  
23. 3J-1907 [4] SEAL-O-RING  
24. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 6V-8397 [4] SEAL-O-RING  
26. 6V-8636 [1] CONNECTOR  
27. 6V-8724 [3] ELBOW (90-DEG)  
28. 9X-8875 [4] BOLT (1/2-13X3.5-IN)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP49761795
 

293-5556: LIFT GP-WORK TOOL

293-5556 LIFT GP-WORK TOOL
S/N B9D1-UP
PART OF 312-2204 LIFT GP-WORK TOOL
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
i02788557 SEBP4976
2935556 LIFT GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-6762 [4] BOLT (1-1/2-12X4.5-IN)  
2. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
3. 3B-8489 [11] FITTING-GREASE (1/8-27 PTF)  
4. 4H-6511 [1] BOLT (1-1/4-12X6.5-IN)  
5. 5F-9891 [4] BOLT (1-1/2-12X6-IN)  
6. 9X-2521 [8] NUT-FULL  
7. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
8. 170-4910 [1] FRAME AS-COUPLER  
9. 172-8121 [2] SPACER (34.925X60.325X14.2-MM THK)  
10. 172-8122 [2] PIN AS  
11. 172-8125 [3] PIN (SNAP)  
12. 172-8126 [1] FILM-WARNING (CRUSH HAZARD)  
13. 172-8127 [1] PIN AS (LOCKING)  
14. 172-8287 I [1] HOSE AS  
15. 172-8288 I [1] HOSE AS  
16. 194-3655 [2] BEARING GP  
17. 195-3330 [1] PLATE AS-MOUNTING  
18. 217-3501 Y [1] CYLINDER GP-HYDRAULIC (WORK TOOL LIFT)  
19. 284-7971 [1] ARM AS (LOWER)  
20. 284-7972 [1] ARM AS (UPPER)  
22. 2M-9780 [4] SEAL-O-RING  
23. 3J-1907 [4] SEAL-O-RING  
24. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 6V-8397 [4] SEAL-O-RING  
26. 6V-8636 [1] CONNECTOR  
27. 6V-8724 [3] ELBOW (90-DEG)  
28. 9X-8875 [4] BOLT (1/2-13X3.5-IN)  
   
  293-5559 FY [1] BRACE GP (WORK TOOL LIFT)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP49761796
 

312-2204: LIFT GP-WORK TOOL

312-2204 LIFT GP-WORK TOOL
S/N B9D1-UP
FOR USE WITH @@@@@359-3925@@@@@, @@@@@365-3354@@@@@, @@@@@365-3355@@@@@, @@@@@365-3368@@@@@, @@@@@365-3369@@@@@
CANNOT BE USED WITH @@@@@250-3071@@@@@, @@@@@309-6809@@@@@, @@@@@351-5178@@@@@
FOR USAGE REFER TO CHART @@@@@309-9859@@@@@, @@@@@309-9873@@@@@
i02788354 SEBP4976
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  293-5556 Y [1] LIFT GP-WORK TOOL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49761797
 

252-7086: MOUNTING GP-BLADE

252-7086 MOUNTING GP-BLADE
S/N B9D1-3662
PART OF 243-6660 CIRCLE GP
i05659664 SEBP4976
2527086 MOUNTING GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 194-4175 [4] BUSHING  
 

#SEBP49761798
 

252-7086: MOUNTING GP-BLADE

252-7086 MOUNTING GP-BLADE
S/N B9D3663-UP
PART OF 243-6660 CIRCLE GP
i04396027 SEBP4976
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP49761799
 

248-1323: MOUNTING GP-RIPPER

248-1323 MOUNTING GP-RIPPER
S/N B9D1-UP
PART OF 248-1322, 296-3528 RIPPER AR
CANNOT BE USED WITH @@@@@264-2392@@@@@, @@@@@248-1322@@@@@, @@@@@296-3528@@@@@
i02783083 SEBP4976
2481323 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [2] SPACER (47X80X20-MM THK)  
2. 3W-7256 [2] SPACER (47X80X16-MM THK)  
3. 6P-5647 [2] BOSS  
4. 104-4523 [2] CAM AS  
5. 248-1326 [1] PLATE AS  
  104-4522 [2] PLATE  
6. 291-6300 [2] LINK AS  
    (EACH INCLUDES)
  3V-2024 [1] BOSS  
7. 293-2476 [2] PIN  
8. 106-4175 M [8] BOLT (M20X2.5X60-MM)  
9. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
10. 267-3506 [6] WASHER-HARD (26X44X4-MM THK)  
11. 267-3508 [8] WASHER-HARD (22X35X3.5-MM THK)  
12. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
13. 7X-2544 M [2] BOLT (M10X1.5X140-MM)  
14. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
15. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
16. 9W-7469 [2] PIN  
17. 9W-7470 [2] PIN  
18. 9X-2615 M [6] BOLT (M24X3X60-MM)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Moldboard Blade
140M Motor Grader
Moldboard Wear Strip - Inspect/Adjust/Replace
140M Motor Grader
Special Instruction
Instructions for Installing New Mounting Components for Rotation Sensor on Certain Motor Graders Equipped With Cat<SUP>&reg;</SUP> Grade Control{5060, 6151, 7220}
Instructions for Installing New Mounting Components for Rotation Sensor on Certain Motor Graders Equipped With Cat® Grade Control{5060, 6151, 7220}
Specifications
Blade Lift
120M, 12M, 140M and 160M Motor Graders Machine Systems
Blade Lift
120M, 12M, 140M and 160M Motor Graders Machine Systems
Systems Operation
Blade Cushion - If Equipped
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Troubleshooting
MID 082 - CID 0908 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 0908 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 3694 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 3694 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
Disassembly and Assembly
Blade - Remove and Install
140M Motor Grader
Blade Lift Arm - Remove
140M Motor Grader
Blade Lift Arm - Install
140M Motor Grader
Service Magazine
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
2011/12/26
Improvement For The AccuGrade<SUP>&reg;</SUP> Rotation Sensor On The M-Series Motor Graders {5060, 6151, 7220}
2009/11/18
Additional Sleeve Bearings can be Installed in the Blade Mounting Groups on Certain Motor Graders {6151}
2014/03/19
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
New Blade Mounting Group Wear Strips are Now Available On Certain H, M, and M Series 2 Motor Graders {6151}
2013/11/22
A Choke Check Valve Can Be Added to Improve Mastless Snow Wing Downward Blade Movement on Certain Motor Graders {6158}
A Choke Check Valve Can Be Added to Improve Mastless Snow Wing Downward Blade Movement on Certain Motor Graders {6158}

Caterpillar Parts SIS Catalog 140M :

EXTENSION GP-BLADE
452-3133 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3132 EXTENSION GP-BLADE
EXTENSION GP-BLADE
250-0615 EXTENSION GP-BLADE
EXTENSION GP-BLADE
243-6685 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5327 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5326 EXTENSION GP-BLADE
EDGE-CUTTING
9W-2341 EDGE-CUTTING
EDGE-CUTTING
9W-2330 EDGE-CUTTING
524-8604 EXTENSION GP-BLADE
LIFT GP-BLADE
261-8536 LIFT GP-BLADE
LIFT GP-BLADE
296-3008 LIFT GP-BLADE
LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
312-2204 LIFT GP-WORK TOOL
MOUNTING GP-BLADE
252-7086 MOUNTING GP-BLADE
252-7086 MOUNTING GP-BLADE

Truck sale:

Caterpillar 140M2, Construction
176,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
164,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
139,800 
Caterpillar 140M2, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Caterpillar TRADE-IN 140M2, Construction
 
Caterpillar TRADE-IN 140M2, Construction
- motor graders
TRACTORS AND EQUIPMENT (I.T.E.) LTD.
Israel
Caterpillar 140M2, Construction
167,614 
Caterpillar 140M2, Construction
- motor graders
CAVPOWER
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.