AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

290-8687 LINES GP-REAR ATTACHMENT S/N AEC1500-UP; AGN1500-UP PART OF 294-2144 HYDRAULIC AR AN ATTACHMENT D7R II


HYDRAULIC SYSTEM
LINES GP-REAR
LINES GP-RIPPER
LINES GP-CYLINDER
LINES GP-WINCH
MANIFOLD GP

TRACK-TYPE TRACTOR D7R II TRACK-TYPE TRACTOR AEC
 D7R Series II TRACK-TYPE TRACTOR STD, XR Differential Steering AEC01500-UP (MACHINE) POWERED BY 3176C Engine SEBP4977 D7R II AEC   (1999)

HYDRAULIC SYSTEM

LINES GP-REAR
LINES GP-REAR ATTACHMENT
290-8687 LINES GP-REAR ATTACHMENT
 

#SEBP49770570
 

290-8687: LINES GP-REAR ATTACHMENT

290-8687 LINES GP-REAR ATTACHMENT
S/N AEC1500-UP; AGN1500-UP
PART OF 294-2144 HYDRAULIC AR
AN ATTACHMENT
i07473915 SEBP4977
2908687 LINES GP-REAR ATTACHMENT Parts scheme 2908687 LINES GP-REAR ATTACHMENT Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-4305 [3] SPACER (0.531X1X0.56-IN THK)  
2. 5R-5718 [6] PLUG-DUST  
3. 5R-6304 [6] COUPLER AS-QUICK DISCONNECT (FEMALE)  
4. 8W-4202 I [1] HOSE AS  
5. 101-3129 M [2] STUD (M10X1.5-THD)  
6. 170-4891 [1] HARNESS AS-SOLENOID (WINCH, REAR)  
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  114-8843 E SLEEVE-PLASTIC (40-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
7. 172-4620 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [2] SEAL-O-RING  
  6Y-2349 [1] CONNECTOR  
8. 180-8569 Y [1] VALVE GP-DIVERTER (IMPLEMENT PILOT OIL)  
9. [1] PLATE AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
10. 235-0678 I [1] HOSE AS  
11. 235-0679 I [1] HOSE AS  
12. 235-0680 I [1] HOSE AS  
13. 235-0681 I [1] HOSE AS  
14. 235-2154 I [1] HOSE AS  
15. 290-8683 I [1] HOSE AS  
16. 294-2146 I [1] HOSE AS  
17. 294-2148 I [1] HOSE AS  
18. [1] PLATE AS  
19. [1] PLATE AS  
20. 296-7747 I [1] HOSE AS  
21. 296-7748 I [1] HOSE AS  
22. 148-8327 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
23. 148-8362 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-6684 [1] ELBOW  
24. 148-8371 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
25. 148-8378 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
26. 148-8433 [1] TEE AS  
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
27. 148-8435 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  6V-8781 [1] TEE  
28. 148-8439 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  6V-8774 [1] TEE  
29. 164-4058 [1] REDUCER AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8948 [1] REDUCER  
30. 164-5592 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  8C-3751 [1] ELBOW  
31. 1P-4577 [12] FLANGE-HALF  
32. 271-8566 [1] FILM-IDENTIFICATION (IMPLEMENT CONTROL)  
33. 4J-0520 [10] SEAL-O-RING  
34. 5F-7055 [2] CLIP  
35. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
36. 6D-4246 [4] CLIP (LOOP)  
37. 7G-5984 [2] CLIP (TAB)  
38. 7G-5985 [2] CLIP (SLOT)  
39. 7G-5986 [2] GROMMET  
40. 7X-0590 [3] WASHER-HARD (13.5X44.5X6-MM THK)  
41. 8T-4121 [24] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4133 M [2] NUT (M10X1.5-THD)  
43. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
44. 8T-4196 M [24] BOLT (M10X1.5X35-MM)  
45. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
46. 8T-4835 [3] BOLT (1/2-13X2-IN)  
47. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
48. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
49. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
50. 8T-8919 [2] BOLT (1/2-13X1.75-IN)  
51. 8T-9389 [2] BOLT (1/2-13X2.75-IN)  
52. 9X-6772 [1] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49770571
 

164-4990: LINES GP-RIPPER

164-4990 LINES GP-RIPPER
S/N 7TP1-UP
ADJUSTABLE MULTI-SHANK
PART OF 164-4717 RIPPER AR
AN ATTACHMENT
i01080680 SEBP4977
1644990 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-6024 I [1] HOSE AS (LH)  
2. 9M-2904 [12] CLAMP-HOSE  
3. 9U-9540 I [1] HOSE AS (RH)  
4. 130-1977 [12] SHIELD  
5. 130-9191 [6] GROMMET  
6. 139-2455 [3] SHIELD  
7. 139-2456 [3] SHIELD (LH)  
8. 167-7640 I [2] HOSE AS (RH)  
9. 167-7641 I [1] HOSE AS (LH)  
10. 167-7642 I [1] HOSE AS (RH)  
11. 167-7643 I [2] HOSE AS  
12. 4J-0520 [12] SEAL-O-RING  
13. 4J-5267 [4] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP49770572
 

228-7368: LINES GP-RIPPER

228-7368 LINES GP-RIPPER
S/N AEC1500-UP; AGN1500-UP
PART OF 228-7816 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02554540 SEBP4977
2287368 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4196 M [52] BOLT (M10X1.5X35-MM)  
2. 211-9491 [1] MANIFOLD  
3. 229-2353 I [1] HOSE AS  
4. 229-2355 I [1] HOSE AS  
5. 229-2356 I [1] HOSE AS  
6. 229-2357 I [1] HOSE AS  
7. 229-2359 [1] BRACKET AS  
8. 4J-0520 [8] SEAL-O-RING  
9. 5P-1075 [58] WASHER-HARD (10.2X22.5X3-MM THK)  
10. 7G-5984 [2] CLIP (TAB)  
11. 7G-5985 [2] CLIP (SLOT)  
12. 7G-5986 [2] GROMMET  
13. 8C-3206 [24] FLANGE-HALF  
14. 8T-4133 M [4] NUT (M10X1.5-THD)  
15. 8T-4185 M [2] BOLT (M10X1.5X50-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49770573
 

270-8486: LINES GP-RIPPER

270-8486 LINES GP-RIPPER -RIPPER
S/N AEC1500-UP; AGN1500-UP
AN ATTACHMENT
i02379752 SEBP4977
2708486 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 270-8481 [1] HOSE AS (COLD WEATHER)  
2. 270-8482 [1] HOSE AS (COLD WEATHER)  
3. 270-8483 [2] HOSE AS (COLD WEATHER)  
4. 270-8484 [1] HOSE AS (COLD WEATHER)  
5. 270-8485 [1] HOSE AS (COLD WEATHER)  
6. 270-8487 [2] HOSE AS (COLD WEATHER)  
 

#SEBP49770574
 

213-6169: LINES GP-TILT CYLINDER

213-6169 LINES GP-TILT CYLINDER
S/N J1L1-UP; J6L1-UP; J8L1-UP
PART OF 212-7420, 212-7421 BULLDOZER AR-SEMI-UNIVERSAL, 212-7422, 218-7469 BULLDOZER AR-STRAIGHT, 212-7416, 212-7417 BULLDOZER AR-UNIVERSAL
AN ATTACHMENT
i01770783 SEBP4977
2136169 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-1325 [1] BLOCK  
2. 1U-1344 [2] CLAMP  
3. 4T-6440 [1] GUARD AS  
  3J-5169 [2] NUT-WELD (5/8-11-THD)  
4. 4T-6443 [1] PLATE  
5. 4T-6483 [1] GUARD AS  
6. 4T-6484 [1] GUARD  
8. 9U-8544 I [2] HOSE AS  
9. 1P-4576 [4] FLANGE-HALF  
10. 4J-5140 [1] SEAL-O-RING  
11. 4J-5267 [4] SEAL-O-RING  
12. 5C-6565 [2] BOLT (1/2-13X1.125-IN)  
13. 5P-8112 [2] GROMMET  
14. 7G-3832 [1] GROMMET  
15. 7G-3833 [1] CLIP (TAB)  
16. 7G-3834 [1] CLIP (SLOT)  
17. 7X-0274 [4] BOLT (5/16-18X2.75-IN)  
18. 7X-0344 [2] BOLT (5/8-11X1.375-IN)  
19. 7X-0365 [2] BOLT (3/4-10X1.5-IN)  
20. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
21. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
22. 8T-4133 M [2] NUT (M10X1.5-THD)  
23. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
24. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
25. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 8T-4994 [9] WASHER-HARD (20X36.5X3.5-MM THK)  
27. 8T-9398 [7] BOLT (3/4-10X1.75-IN)  
28. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49770575
 

222-1158: LINES GP-TILT CYLINDER

222-1158 LINES GP-TILT CYLINDER
S/N AEC1500-UP; AGN1500-UP
PART OF 270-0515 HYDRAULIC AR
i02565477 SEBP4977
2221158 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 226-7906 [1] MANIFOLD  
2. 228-6679 [1] BRACKET AS  
3. 228-6680 [1] BRACKET AS  
4. 228-6681 [1] BRACKET AS  
5. 228-6682 [1] BRACKET AS  
6. 228-6683 I [1] HOSE AS  
7. 228-6684 I [1] HOSE AS  
8. 1L-4684 [1] CLAMP-HOSE  
9. 2D-8426 [2] STUD-TAPERLOCK (1/2-13X3.19-IN)  
10. 4J-0520 [2] SEAL-O-RING  
11. 4J-5267 [4] SEAL-O-RING  
12. 5H-4018 [2] COVER  
13. 5P-1075 [23] WASHER-HARD (10.2X22.5X3-MM THK)  
14. 5P-2228 [1] BOLT (1/2-13X1-IN)  
15. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
16. 6V-8188 [2] NUT (1/2-13-THD)  
17. 7G-3832 [5] GROMMET  
18. 7G-3833 [5] CLIP (TAB)  
19. 7G-3834 [5] CLIP (SLOT)  
20. 8C-3205 [8] FLANGE-HALF  
21. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
22. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
23. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
24. 8T-4196 M [18] BOLT (M10X1.5X35-MM)  
25. 8T-4223 [14] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-8917 [3] BOLT (1/2-13X1.25-IN)  
27. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49770576
 

9U-8547: LINES GP-TILT CYLINDER

9U-8547 LINES GP-TILT CYLINDER -DUAL
S/N AEC1500-UP; AGN1500-UP
PART OF 9U-8610 CYLINDER AR-DUAL TILT
AN ATTACHMENT
i00441119 SEBP4977
9U8547 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-8712 [4] BLOCK  
2. 4J-5140 [2] SEAL-O-RING  
3. 1P-4574 [4] FLANGE-HALF  
4. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
5. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
7. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
8. 9W-0194 [1] GUARD AS  
9. 9B-7237 [32] BOLT (3/8-16X1.25-IN)  
10. 8T-4896 [32] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 4J-5267 [10] SEAL-O-RING  
12. 1P-4576 [16] FLANGE-HALF  
13. 4T-6224 I [2] HOSE AS  
14. 8T-9398 [6] BOLT (3/4-10X1.75-IN)  
15. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
16. 5C-6565 [4] BOLT (1/2-13X1.125-IN)  
17. 9W-8864 I [2] HOSE AS  
18. 9W-8865 I [2] HOSE AS  
19. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
20. 6V-8188 [2] NUT (1/2-13-THD)  
21. 9W-8681 [2] BRACKET  
22. 9W-8682 [1] GUARD AS  
  4T-6220 [1] GUARD AS  
23. 9W-0199 [2] TUBE AS  
24. 5P-7464 [2] CLIP (SLOT)  
  5P-7465 [2] CLIP (TAB)  
  6V-1249 [2] GROMMET (22-MM ID)  
25. 9W-0400 [1] TUBE AS  
26. 6V-5782 [8] BOLT (5/16-18X1.125-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP49770577
 

228-7369: LINES GP-WINCH

228-7369 LINES GP-WINCH
S/N AEC1500-UP; AGN1500-UP
PART OF 228-7818 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02554529 SEBP4977
2287369 LINES GP-WINCH Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-8893 Y [1] MANIFOLD GP-HYDRAULIC (WINCH)  
2. 170-0462 I [1] HOSE AS  
3. 170-0463 I [1] HOSE AS  
4. 170-4891 [1] HARNESS AS-SOLENOID (WINCH, REAR)  
  114-8843 E SLEEVE-PLASTIC (40-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE(S) & INTERFACE SEAL)
5. 229-6243 I [1] HOSE AS  
6. 148-8353 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-9001 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
7. 148-8354 [1] ELBOW AS  
  6V-9002 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
8. 148-8407 [1] PLUG AS  
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
9. 148-8411 [1] PLUG AS  
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
10. 148-8441 [1] TEE AS  
  6V-9032 [1] TEE-O-RING  
  2M-9780 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
11. 155-3624 [1] PLUG AS  
  9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
12. 1P-3703 [4] SEAL-RECTANGULAR  
13. 1P-5766 [4] FLANGE-HALF  
14. 5P-0047 [2] COVER  
15. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 5P-7458 [3] CLIP (SLOT)  
17. 5P-7459 [3] CLIP (TAB)  
18. 6V-0400 [4] FLANGE-HALF  
19. 8C-6877 [16] BOLT (7/16-14X1.75-IN)  
20. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
21. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
22. 8T-5360 [16] WASHER (12X22.5X2.5-MM THK)  
23. 8E-3430 [1] STRIP AS  
  8E-3431 [1] PLATE  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
24. 1P-3702 [2] SEAL-RECTANGULAR  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49770578
 

226-4751: MANIFOLD GP-CONTROL

226-4751 MANIFOLD GP-CONTROL -IMPLEMENT PILOT PRESSURE-IMPLEMENT
S/N AEC1500-UP; AGN1500-UP
PART OF 222-1156 LINES GP-PILOT
i02407505 SEBP4977
2264751 MANIFOLD GP-CONTROL Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 158-9956 Y [1] VALVE GP-CHECK (PILOT PRESSURE SUPPLY)  
2. 170-3357 Y [1] VALVE GP-PRESSURE REDUCING (IMPLEMENT PILOT OIL)  
3. 225-8026 Y [1] VALVE GP-RELIEF (IMPLEMENT PILOT OIL)  
4. 201-0950 Y [1] VALVE GP-SOLENOID (HYDRAULIC LOCKOUT)  
5. 6E-5066 [1] SCREEN (HYDRAULIC)(IMPLEMENT PILOT OIL)  
6. 9S-8002 [1] PLUG (7/16-20-THD)  
7. 9S-8004 [1] PLUG (9/16-18-THD)  
8. 3J-7354 [1] SEAL-O-RING  
9. 3J-1907 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49770579
 

161-8893: MANIFOLD GP-HYDRAULIC

161-8893 MANIFOLD GP-HYDRAULIC -WINCH
S/N AEC1500-UP; AGN1500-UP
PART OF 228-7369 LINES GP-WINCH
AN ATTACHMENT
i01038385 SEBP4977
1618893 MANIFOLD GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D7R II TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
2. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 4P-7581 [1] CLIP (LADDER)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
 

Information:

Caterpillar Parts SIS Catalog D7R II :

LINES GP-PUMP
222-1155 LINES GP-PUMP
LINES GP-PILOT
271-5642 LINES GP-PILOT
LINES GP-PILOT
222-1180 LINES GP-PILOT
LINES GP-PILOT
222-1179 LINES GP-PILOT
LINES GP-PILOT
222-1156 LINES GP-PILOT
LINES GP-LIFT CYLINDER
222-1157 LINES GP-LIFT CYLINDER
270-8490 LINES GP-CYLINDER
270-8489 LINES GP-CYLINDER
LINES GP-RIPPER
164-4990 LINES GP-RIPPER
LINES GP-RIPPER
228-7368 LINES GP-RIPPER
LINES GP-RIPPER
270-8486 LINES GP-RIPPER
LINES GP-TILT CYLINDER
213-6169 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
222-1158 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9U-8547 LINES GP-TILT CYLINDER
LINES GP-WINCH
228-7369 LINES GP-WINCH
MANIFOLD GP-CONTROL
226-4751 MANIFOLD GP-CONTROL

Truck sale:

Caterpillar D7RII, Construction
238,939 
Caterpillar D7RII, Construction
- Dozers
WESTRAC PTY. LTD. (NSW)
Australia
 
260,337 
Caterpillar D7RII, Construction
- Dozers
WESTRAC PTY. LTD. (NSW)
Australia
Caterpillar D7RIILGP, Construction
220,000 
Caterpillar D7RIILGP, Construction
- Dozers
ZIEGLER CAT
Caterpillar D7RIILGP, Construction
179,000 
Caterpillar D7RIILGP, Construction
- Dozers
FOLEY, INC.
Caterpillar D7RIILGP, Construction
244,500 
Caterpillar D7RIILGP, Construction
- Dozers
YANCEY BROS. CO.
GA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.