OPERATOR STATION
HEATER GPMIRROR GP
OPERATOR STATION
HEATER GP#SEBP49791040
250-2933: LINES GP-HEATER
250-2933 LINES GP-HEATER -CAB
S/N B9F1-UP
PART OF 233-3149, 361-3133 AIR CONDITIONER GP
S/N B9F1-UP
PART OF 233-3149, 361-3133 AIR CONDITIONER GP
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-2488 | [4] | CLAMP-HOSE | |
| 2. | 260-5806 | [1] | PLATE AS | |
| 3. | 278-3354 | [1] | FILM-INSTRUCTION (HVAC WATER, DRAINING, FILLING) | |
| 4. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 5. | 6D-1641 | [1] | CLIP (LOOP) | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 8. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 9. | 136-1953 E | HOSE (85-CM) | ||
| 9A. | 136-1953 E | HOSE (87-CM) | ||
| 10. | 5P-5637 D | SEAL (0.6-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49791041
273-1878: LINES GP-HEATER
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-2488 | [4] | CLAMP-HOSE | |
| 2. | 273-0343 | [1] | PLATE AS | |
| 3. | 278-3354 | [1] | FILM-INSTRUCTION (HVAC WATER, DRAINING, FILLING) | |
| 4. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 5. | 6D-1641 | [1] | CLIP (LOOP) | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 8. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 9. | 136-1953 E | HOSE (87-CM EACH) | ||
| 10. | 5P-5637 D | SEAL (0.6-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49791042
339-6165: MIRROR GP
339-6165 MIRROR GP -INTERIOR, REAR
S/N B9F1-UP
PART OF 260-6120, 344-5494, 350-5385, 364-3735, 364-3740, 369-5238 OPTION AR-REGIONAL, 352-2105, 369-5967 ROADING AR
S/N B9F1-UP
PART OF 260-6120, 344-5494, 350-5385, 364-3735, 364-3740, 369-5238 OPTION AR-REGIONAL, 352-2105, 369-5967 ROADING AR
#SEBP49791043
339-8788: MIRROR GP
339-8788 MIRROR GP -EXTERIOR
S/N B9F1-UP
PART OF 260-6120, 344-5494, 350-5385, 364-3735, 364-3740, 369-5238 OPTION AR-REGIONAL, 352-2105, 369-5967 ROADING AR
S/N B9F1-UP
PART OF 260-6120, 344-5494, 350-5385, 364-3735, 364-3740, 369-5238 OPTION AR-REGIONAL, 352-2105, 369-5967 ROADING AR
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 339-6167 | [4] | BLOCK | |
| 2. | 339-6168 | [4] | BLOCK | |
| 3. | 466-9209 | [2] | CLIP | |
| 4. | 339-6543 | [2] | MIRROR AS | |
| 5. | 215-4809 | [2] | MIRROR-CONVEX | |
| 6. | 341-3142 | [2] | TUBE | |
| 7. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 8. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4185 M | [8] | BOLT (M10X1.5X50-MM) | |
| 10. | 9X-2027 | [2] | WASHER (11X18X2-MM THK) | |
| M | METRIC PART | |||
#SEBP49791044
105-9659: MIRROR GP-REAR VIEW
105-9659 MIRROR GP-REAR VIEW -INTERIOR
S/N B9F1-1299
PART OF 233-3208 MIRROR GP-REAR VIEW
S/N B9F1-1299
PART OF 233-3208 MIRROR GP-REAR VIEW
#SEBP49791045
233-3208: MIRROR GP-REAR VIEW
233-3208 MIRROR GP-REAR VIEW -INTERIOR
S/N B9F1-1299
PART OF 254-5399, 365-2969, 379-3677, 389-5970 CAB AR
S/N B9F1-1299
PART OF 254-5399, 365-2969, 379-3677, 389-5970 CAB AR
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 105-9659 Y | [1] | MIRROR GP-REAR VIEW (INTERIOR) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49791046
233-3295: MIRROR GP-REAR VIEW
233-3295 MIRROR GP-REAR VIEW -EXTERIOR
S/N B9F1-UP
DUAL
PART OF 353-5006 DISTRIBUTION AR, 350-5385, 397-3499 OPTION AR-REGIONAL, 352-2105 ROADING AR
CANNOT BE USED WITH @@@@@233-3296@@@@@, @@@@@344-0984@@@@@
S/N B9F1-UP
DUAL
PART OF 353-5006 DISTRIBUTION AR, 350-5385, 397-3499 OPTION AR-REGIONAL, 352-2105 ROADING AR
CANNOT BE USED WITH @@@@@233-3296@@@@@, @@@@@344-0984@@@@@
#SEBP49791047
233-3296: MIRROR GP-REAR VIEW
233-3296 MIRROR GP-REAR VIEW -EXTERIOR, HEATED
S/N B9F1-621
ELECTRIC
PART OF 286-9017 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@233-3295@@@@@
S/N B9F1-621
ELECTRIC
PART OF 286-9017 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@233-3295@@@@@
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 123-4586 | [4] | BLOCK | |
| 2. | 236-4630 | [1] | SWITCH AS-ROCKER (HEATED MIRRORS) | |
| 3. | 259-4759 | [2] | MIRROR AS | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 265-8941 | [2] | TUBE AS | |
| 5. | 291-9154 | [4] | BLOCK | |
| 6. | 189-5358 M | [8] | BOLT (M10X1.5X60-MM) | |
| 7. | 297-0760 | [1] | RELAY AS (24-VDC, 20-AMPERE)(HEATED MIRROR TIMER) | |
| 8. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 9. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP49791048
233-3296: MIRROR GP-REAR VIEW
233-3296 MIRROR GP-REAR VIEW -EXTERIOR, HEATED
S/N B9F622-UP
ELECTRIC
PART OF 286-9017 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@233-3295@@@@@
S/N B9F622-UP
ELECTRIC
PART OF 286-9017 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@233-3295@@@@@
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 123-4586 | [4] | BLOCK | |
| 2. | 343-1824 CY | [1] | SWITCH GP-ROCKER (HEATED MIRRORS) | |
| 3. | 259-4759 | [2] | MIRROR AS | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 265-8941 | [2] | TUBE AS | |
| 5. | 291-9154 | [4] | BLOCK | |
| 6. | 189-5358 M | [8] | BOLT (M10X1.5X60-MM) | |
| 7. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49791049
310-9291: MIRROR GP-REAR VIEW
310-9291 MIRROR GP-REAR VIEW
S/N B9F1-UP
FLAT
PART OF 349-8722 OPTION AR-REGIONAL
S/N B9F1-UP
FLAT
PART OF 349-8722 OPTION AR-REGIONAL
Parts for your 12M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-6877 | [2] | MIRROR AS (RH, LH) | |
| (EACH INCLUDES) | ||||
| 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 5P-9865 | [2] | SPACER (10X25.4X17.5-MM THK) | ||
| 6V-2286 | [2] | NUT-ACORN (3/8-16-THD) | ||
| 2. | 6G-8829 | [2] | CLAMP | |
| 3. | 6G-8831 | [2] | CLAMP | |
| 4. | 123-4586 | [4] | BLOCK | |
| 5. | 265-8941 | [2] | TUBE AS | |
| 6. | 291-9154 | [6] | BLOCK | |
| 7. | 310-9292 Y | [2] | MIRROR GP-REAR VIEW (RH, LH) | |
| 8. | 097-8516 | [2] | CAM | |
| 9. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 11. | 8T-4185 M | [8] | BOLT (M10X1.5X50-MM) | |
| 12. | 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | |
| 13. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 14. | 9C-5928 | [4] | SPACER (10X19X5.15-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
OPERATOR STATION
HEATER GP
Special Instruction
Procedure to Improve the Hose Routing for the Heater Lines Group on Certain Motor Graders{1812, 7304}
Procedure to Improve the Hose Routing for the Heater Lines Group on Certain Motor Graders{1812, 7304}
Procedure to Improve the Hose Routing for the Heater Lines Group on Certain Motor Graders{1812, 7304}
Procedure to Replace the Water Valve for the Heater Coil on Certain Motor Graders and Off-Highway Trucks {7304}
Procedure to Replace the Water Valve for the Heater Coil on Certain Motor Graders and Off-Highway Trucks {7304}
Procedure to Replace the Water Valve for the Heater Coil on Certain Motor Graders and Off-Highway Trucks {7304}
Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Systems Operation
Testing and Adjusting
Troubleshooting
Troubleshooting Heating and Air Conditioning Control System
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control Panel Troubleshooting - 584 and 584HD Forwarders
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Automatic Temperature Control System (ECM Controlled) Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines
Air Conditioning and Heating R134a for All Caterpillar Machines
Disassembly and Assembly
Blower Motor (Air Conditioner and Heater) - Remove and Install
120M and 12M Motor Grader Machine Systems
120M and 12M Motor Grader Machine Systems
Service Magazine
New Hose Clamps are Now Used for the Heater Lines Group on Certain Motor Graders {1812, 7304}
2011/01/17
2011/01/17
A Procedure Is Used to Replace the Water Valve for the Heater Coil On Certain Motor Graders and Off-Highway Trucks {7304}
A Procedure Is Used to Replace the Water Valve for the Heater Coil On Certain Motor Graders and Off-Highway Trucks {7304}
A Procedure Is Used to Replace the Water Valve for the Heater Coil On Certain Motor Graders and Off-Highway Trucks {7304}
