233-3288 WIRING GP-GRADE CONTROL -CAB S/N B9C1-341 PART OF 254-5399 CAB AR ALSO AN ATTACHMENT 120M MOTOR GRADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 233-3288 WIRING GP-
1. 356-3638 WIRING GP-
2. 356-3638 WIRING GP-
3. 291-2909 WIRING GP-
4. 292-1874 WIRING GP-
5. 253-1964 WIRING GP-
6. 253-1967 WIRING GP-
7. 352-1595 WIRING GP-
8. 431-4286 WIRING GP-
9. 246-5719 WIRING GP-
0. INFORMATION

MOTOR GRADER 120M MOTOR GRADER B9C
120M Motor Grader B9C00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4980 120M B9C (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

356-3635 WIRING GP-FRONT

233-3288 WIRING GP-GRADE CONTROL

356-3638 WIRING GP-GRADE CONTROL

291-2909 WIRING GP-LIGHTING

#SEBP49800470

233-3288: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

233-3288 WIRING GP-GRADE CONTROL -CAB
S/N B9C1-341
PART OF 254-5399 CAB AR
ALSO AN ATTACHMENT

i02775846 SEBP4980

2333288 WIRING GP-GRADE CONTROL Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)
2.	3S-2093	[17]	STRAP-CABLE
3.	296-4925	[1]	HARNESS AS-CONTROL (ACCUGRADE)
	3R-9965	[1]	PLUG AS-CONNECTOR (8-PIN)
	6D-5257	[1]	PLUG AS-CONNECTOR (8-PIN)
	9X-1054	[1]	PLUG AS-CONNECTOR (4-PIN)
	155-2256	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	9X-7145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
4.	320-9861	[1]	GASKET
5.	130-5300	[1]	CLIP
6.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
7.	5C-9553 M	[1]	BOLT (M6X1X16-MM)
8.	8T-0285 M	[4]	SCREW-MACHINE (M4X0.7X12-MM)
9.	8T-0328	[4]	WASHER-HARD (5.5X10X1-MM THK)
10.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

#SEBP49800471

356-3638: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

356-3638 WIRING GP-GRADE CONTROL -ACCUGRADE
S/N B9C1-UP
PART OF 365-1331, 383-2702, 397-5165, 415-1183, 462-6388, 462-6389 GRADE CONTROL AR
AN ATTACHMENT

i04270753 SEBP4980

3563638 WIRING GP-GRADE CONTROL Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6D-3033	[16]	SCREW-SOCKET HEAD (4-40X0.5-IN)
2.	7K-1181	[25]	STRAP-CABLE
3.	9C-5344	[2]	SPACER (10.5X20X18-MM THK)
4.	132-8487	[4]	NUT-RING
5.	169-5414	[1]	CLIP
6.	236-2356	[1]	HARNESS AS-SENSOR (ANGLE)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-2383 G		HOSE (50-IN)
	8T-5346 E		TUBE-HEAT SHRINK (19.1-MM DIA)(10-CM)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-4385	[1]	PLUG AS-CONNECTOR (6-PIN)
	114-8843 E		SLEEVE-PLASTIC (20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	243-5362	[1]	CAP-DUST
7.	236-8826	[4]	BOSS (1-1/8-18X0.708-IN)
8.	243-3250	[1]	HARNESS AS-SENSOR (ROTATION)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-4385	[1]	PLUG AS-CONNECTOR (6-PIN)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	243-5362	[1]	CAP-DUST
9.	251-1133	[1]	TUBE
10.	255-3482	[1]	BRACKET
11.	308-9398	[1]	BRACKET AS
12.	308-9399	[1]	BRACKET AS
13.	369-0950	[1]	HARNESS AS-CHASSIS (BLADE)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-1424 G		HOSE (100.8-IN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	174-0503	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	210-8958 E		TUBE-HEAT SHRINK (24-MM DIA)(16-CM)
	368-2369 B		TAPE
	368-2370 B		TAPE
14.	319-5176	[2]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
15.	327-0560	[1]	BRACKET (RH)
16.	327-0561	[1]	BRACKET (LH)
17.	356-3629	[1]	BRACKET
18.	356-3637	[1]	HARNESS AS-CHASSIS
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	7R-3029	[4]	CAP-DUST
	8T-8737	[3]	PLUG-SEAL
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-4385	[1]	PLUG AS-CONNECTOR (6-PIN)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(115-CM)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	174-0503	[4]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	228-3323	[4]	CLIP-SPRING
	243-5362	[1]	CAP-DUST
19.	092-5524 M	[2]	BOLT (M12X1.75X80-MM)
20.	130-5300	[2]	CLIP
21.	174-9692	[4]	SPACER (20.5X35X16-MM THK)
22.	131-3539 M	[4]	SCREW-FLAT HEAD (M8X1.25X30-MM)
23.	1J-6762	[4]	BOLT-PLOW (3/4-10X3-IN)
24.	1K-6870	[1]	LOCKNUT (3/4-10-THD)
25.	223-3490	[1]	CLIP
26.	2J-3506	[4]	NUT-FULL (3/4-10-THD)
27.	4P-7428	[1]	CLIP (LADDER)
28.	4P-7429	[2]	CLIP (LADDER)
29.	4P-7581	[1]	CLIP (LADDER)
30.	5P-1076	[8]	WASHER-HARD (13.5X30X4-MM THK)
31.	5P-4135	[1]	BOLT (3/4-10X8-IN)
33.	6D-4246	[2]	CLIP (LOOP)
35.	9X-8250	[4]	CLIP (LOOP)
36.	7X-0619	[4]	WASHER-HARD (20X30X2.5-MM THK)
37.	8C-6857	[4]	BOLT (3/4-10X2.75-IN)
38.	8C-8585 M	[2]	SCREW-BUTTON HEAD (M10X1.5X20-MM)
39.	8M-2773	[5]	CLIP (LOOP)
40.	8T-4121	[22]	WASHER-HARD (11X21X2.5-MM THK)
41.	8T-4123	[4]	WASHER (22X35X3.5-MM THK)
42.	8T-4137 M	[17]	BOLT (M10X1.5X20-MM)
43.	8T-4192 M	[1]	BOLT (M12X1.75X25-MM)
44.	8T-4194 M	[4]	BOLT (M12X1.75X50-MM)
45.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
46.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
47.	8T-4244 M	[2]	NUT (M12X1.75-THD)
48.	9M-8406	[2]	CLIP (LOOP)
49.	125-8534	[1]	PLATE AS
50.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART

#SEBP49800472

356-3638: WIRING GP-GRADE CONTROL

WIRING GP-GRADE CONTROL

356-3638 WIRING GP-GRADE CONTROL -ACCUGRADE
S/N B9C1423-UP
PART OF 365-1331, 383-2702, 462-6388, 462-6389 GRADE CONTROL AR
AN ATTACHMENT

i06928103 SEBP4980

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-1716	[16]	SCREW (4-1/2-40X0.63-IN)
2.	7K-1181 C	[24]	STRAP-CABLE
3.	125-8534	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
4.	127-9323 C	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	132-8487	[4]	NUT-RING
6.	169-5414	[1]	CLIP
7.	236-8826	[4]	BOSS (1-1/8-18X0.708-IN)
8.	251-1133	[1]	TUBE
9.	255-3482	[1]	BRACKET
10.	511-2430	[1]	BRACKET AS (LH)
11.	511-2431	[1]	BRACKET AS (RH)
12.	319-5176	[2]	BRACKET AS
13.	327-0560	[1]	BRACKET (RH)
14.	327-0561	[1]	BRACKET (LH)
15.	356-3629	[1]	BRACKET
16.	356-3637	[1]	HARNESS AS-CHASSIS
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	7R-3029	[4]	CAP-DUST
	8T-8737	[3]	PLUG-SEAL
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-4385	[1]	PLUG AS-CONNECTOR (6-PIN)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(115-CM)
	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	174-0503	[4]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	228-3323	[4]	CLIP-SPRING
	243-5362	[1]	CAP-DUST
17.	369-0950 Y	[1]	HARNESS AS-CHASSIS (BLADE)
18.	448-1893 C	[1]	BRACKET AS
19.	448-1938 CY	[1]	HARNESS AS-SENSOR (INCLINATION)
20.	474-5410 CY	[1]	HARNESS AS-SENSOR (ROTATION SENSOR)
21.	111-9251 C	[4]	WASHER-HARD (20X35X1.6-MM THK)
22.	130-5300	[2]	CLIP
23.	131-3539 M	[4]	SCREW-FLAT HEAD (M8X1.25X30-MM)
24.	174-9692	[4]	SPACER (20.5X35X16-MM THK)
25.	1J-6762	[4]	BOLT-PLOW (3/4-10X3-IN)
26.	1K-6870	[1]	LOCKNUT (3/4-10-THD)
27.	223-3490	[1]	CLIP
28.	2J-3506	[4]	NUT-FULL (3/4-10-THD)
29.	329-3356 CM	[1]	NUT (M12X1.75-THD)
30.	344-5675 CM	[1]	NUT (M10X1.5-THD)
31.	4P-7581 C	[3]	CLIP (LADDER)
32.	5K-3294 C	[1]	CLIP (SLOT)
33.	5P-1076	[8]	WASHER-HARD (13.5X30X4-MM THK)
34.	5P-4135	[1]	BOLT (3/4-10X8-IN)
35.	6D-4246	[2]	CLIP (LOOP)
36.	8C-6857	[4]	BOLT (3/4-10X2.75-IN)
37.	8C-8585 M	[2]	SCREW-BUTTON HEAD (M10X1.5X20-MM)
38.	8M-2770 C	[5]	CLIP (LOOP)
39.	8M-2773	[5]	CLIP (LOOP)
40.	8T-4121 C	[27]	WASHER-HARD (11X21X2.5-MM THK)
41.	8T-4123	[4]	WASHER (22X35X3.5-MM THK)
42.	8T-4136 CM	[4]	BOLT (M10X1.5X25-MM)
43.	8T-4137 CM	[19]	BOLT (M10X1.5X20-MM)
44.	8T-4192 M	[1]	BOLT (M12X1.75X25-MM)
45.	8T-0558 M	[4]	BOLT-SELF-LOCKING (M12X1.75X50-MM)
46.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
47.	8T-4223 C	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
48.	9C-5344	[2]	SPACER (10.5X20X18-MM THK)
49.	9X-8250	[4]	CLIP (LOOP)
50.	7X-7729	[2]	WASHER (11X25X3-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49800473

291-2909: WIRING GP-LIGHTING

WIRING GP-LIGHTING

291-2909 WIRING GP-LIGHTING -WORK LIGHTS
S/N B9C1-341
PART OF 254-5399 CAB AR
ALSO AN ATTACHMENT

i02779049 SEBP4980

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[34]	STRAP-CABLE
2.	291-2908	[1]	HARNESS AS-LIGHTING
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[14]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[14]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)

#SEBP49800474

292-1874: WIRING GP-LIGHTING

WIRING GP-LIGHTING

292-1874 WIRING GP-LIGHTING -WORK LIGHTS
S/N B9C1-341
PART OF 254-5399 CAB AR
ALSO AN ATTACHMENT

i02779191 SEBP4980

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	292-1868	[1]	HARNESS AS-LIGHTING
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)

#SEBP49800475

253-1964: WIRING GP-MONITOR

WIRING GP-MONITOR

253-1964 WIRING GP-MONITOR -CD700 DISPLAY
S/N B9C1-UP
PART OF 292-7975 DISPLAY AR-MONITOR

i02788465 SEBP4980

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
2.	114-6658	[2]	WASHER (6.5X17X1-MM THK)
3.	140-7480	[1]	BRACKET-MOUNTING
4.	167-8610	[1]	BRACKET AS
5.	222-9151	[2]	WASHER-HARD (11X32X5-MM THK)
6.	245-8334	[2]	KNOB
7.	252-5190	[1]	HARNESS AS-FRONT CHASSIS
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	248-5358	[1]	PLUG AS-CONNECTOR (39-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
8.	253-1963	[1]	BRACKET AS
9.	253-7461	[1]	HARNESS AS-RADIO
	190-7614	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	167-8987	[1]	PLUG AS-CONNECTOR (8-PIN)
10.	273-1719	[1]	BRACKET AS
11.	273-5924	[1]	KNOB
12.	300-7909	[1]	BRACKET AS
	205-7047 M	[2]	INSERT-THREADED (M4X0.7-THD)
13.	295-8369	[1]	PLATE
14.	295-8370	[1]	BRACKET AS
	7T-1099	[2]	LINK
	6V-9632 M	[1]	NUT-WELD (M6X1-THD)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
	9X-2032 M	[4]	NUT-WELD (M4X0.7-THD)
15.	295-8381	[1]	PLATE AS
16.	296-1067	[1]	HARNESS AS-WIRING (LIGHT BAR)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	230-5008	[3]	PLUG AS-CONNECTOR (4-PIN)
17.	096-6166	[6]	WASHER-HARD (4.5X9X1-MM THK)
18.	117-8929	[1]	WASHER (6.6X22X2-MM THK)
19.	130-5300	[2]	CLIP
20.	6B-8193	[2]	PIN-CLEVIS
21.	204-0813	[3]	BOLT (M6X1X40-MM)
22.	225-3109 M	[4]	SCREW-TRUSS HEAD (M4X0.7X14-MM)
23.	3B-4610	[2]	PIN-COTTER
24.	4L-7125	[4]	LOCKWASHER
25.	5C-7261 M	[2]	NUT (M8X1.25-THD)
26.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
27.	5P-6419	[1]	GROMMET
28.	5S-7349	[2]	BOLT (1/4-20X0.5-IN)
29.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
30.	8C-5607	[6]	MOUNT-ISOLATION
31.	8C-5608	[3]	SPACER (6.5X9.5X25.4-MM THK)
32.	8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
33.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
34.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
35.	8T-7852 M	[6]	BOLT (M4X0.7X10-MM)
36.	8T-9394	[2]	BOLT-SOCKET HEAD (10-24X0.5-IN)
37.	9X-2045 M	[2]	SCREW-TRUSS HEAD (M6X1X20-MM)
38.	9X-6165	[3]	WASHER (6.5X22X2.5-MM THK)
39.	5P-7657 BD		SEAL
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP49800476

253-1967: WIRING GP-MONITOR

WIRING GP-MONITOR

253-1967 WIRING GP-MONITOR -CD610 DISPLAY
S/N B9C1-UP
PART OF 292-7980 DISPLAY AR-MONITOR

i02788460 SEBP4980

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	095-0817	[2]	LOCKWASHER
2.	167-8712	[1]	ALARM (CAES)
3.	167-8713	[1]	BAFFLE AS
4.	167-8714	[1]	WIRE AS
5.	248-2284	[2]	KNOB-CONTROL
6.	251-0077	[1]	BRACKET AS
7.	251-9571	[1]	BRACKET AS
			(EACH BRACKET AS INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
8.	295-8963	[1]	PLATE
9.	296-4922	[1]	HARNESS AS-MONITOR
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-6772	[2]	STRAP-CABLE
	126-1774	[1]	COVER-CONNECTOR
	147-1444	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
10.	130-5300	[3]	CLIP
11.	4L-7125	[4]	LOCKWASHER
12.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
13.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	5P-7657 D		SEAL (0.2-M)
	D		ORDER BY THE METER
	M		METRIC PART

#SEBP49800477

352-1595: WIRING GP-POWER RECEPTACLE

WIRING GP-POWER RECEPTACLE

352-1595 WIRING GP-POWER RECEPTACLE
S/N B9C1-UP
SHIELDED CABLE
PART OF 364-3740 OPTION AR-REGIONAL, 352-2105, 369-5967 ROADING AR
AN ATTACHMENT

i03902619 SEBP4980

3521595 WIRING GP-POWER RECEPTACLE Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	7K-1181	[13]	STRAP-CABLE
3.	9X-9365	[1]	BRACKET (LAMP)
4.	240-7192	[4]	RESISTOR AS (1500-OHM, 1-WATT)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
5.	253-9557	[2]	BLOCK AS-JUNCTION
6.	286-3043	[1]	SPACER (13.5X15.9X60.7-MM THK)
7.	389-9478	[1]	RECEPTACLE AS
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(16-CM)
		[1]	COVER-TERMINAL
	109-0887 E		SLEEVE (74-CM)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
	368-2369 B		TAPE
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(19-CM)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
8.	350-2048	[1]	CABLE AS
	328-8425	[1]	COVER-TERMINAL (RED)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.6-M)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	194-4046	[1]	COVER AS-TERMINAL (00-GA, POSITIVE, RED)
	274-9183	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
9.	350-2049	[1]	CABLE AS
	328-8425		COVER-TERMINAL (RED)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8729	[1]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8737	[1]	PLUG-SEAL
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
10.	350-2051	[1]	CABLE AS
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.3-M)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	177-9648	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
	190-3849	[1]	COVER-TERMINAL (RED)(FLAG)
	276-1786	[1]	COVER-TERMINAL (RED)
	315-0180	[1]	TERMINAL-RING (00-GA, 3/8-IN SCREW)
11.	350-2052	[1]	CABLE AS
	328-8425	[2]	COVER-TERMINAL (RED)
	1S-7252	[2]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.6-M)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8729	[1]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECPTACLE AS & WEDGE)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12.	350-2053	[1]	CABLE AS
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.6-M)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9G-0004	[1]	COVER AS-TERMINAL (RED)
	8C-5917	[1]	TERMINAL AS-BATTERY (POSITIVE)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	276-1786	[1]	COVER-TERMINAL (RED)
13.	350-2054	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.3-M)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
14.	091-9035	[1]	SPACER (11X25X20-MM THK)
15.	130-5300	[2]	CLIP
16.	150-4086 M	[4]	SCREW (M4X0.7X16-MM)
17.	4S-1962	[8]	CLIP (LOOP)
18.	5C-2890 M	[4]	NUT (M6X1-THD)
19.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
20.	5P-8939	[8]	GROMMET
21.	6K-8178	[1]	CLIP (LOOP)
22.	105-3482 M	[4]	BOLT-SOCKET HEAD (M8X1.25X16-MM)
23.	8S-2634	[1]	COVER AS
24.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4133 M	[1]	NUT (M10X1.5-THD)
26.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
27.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
28.	8T-4178 M	[1]	BOLT (M10X1.5X90-MM)
29.	8T-4179 M	[5]	BOLT (M12X1.75X20-MM)
30.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
31.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
32.	9M-8406	[12]	CLIP (LOOP)
33.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
34.	4P-7581	[1]	CLIP (LADDER)
35.	355-5076	[1]	WIRE AS
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49800478

431-4286: WIRING GP-POWER RECEPTACLE

WIRING GP-POWER RECEPTACLE

431-4286 WIRING GP-POWER RECEPTACLE
S/N B9C1-UP
SHIELDED CABLE
PART OF 481-4879 OPTION AR-REGIONAL, 369-5967 ROADING AR
AN ATTACHMENT

i05346812 SEBP4980

4314286 WIRING GP-POWER RECEPTACLE Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	7K-1181	[24]	STRAP-CABLE
3.	8S-2634	[1]	COVER AS
4.	9X-9365	[1]	BRACKET (LAMP)
5.	240-7192	[4]	RESISTOR AS (1500-OHM, 1-WATT)
6.	253-9557	[2]	BLOCK AS-JUNCTION
7.	286-3043	[1]	SPACER (13.5X15.9X60.7-MM THK)
8.	350-2049	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8737	[1]	PLUG-SEAL
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	328-8425	[1]	COVER-TERMINAL (RED)
9.	350-2051	[1]	CABLE AS
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.3-M)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	177-9648	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
	190-3849	[1]	COVER-TERMINAL (RED)
	276-1786	[1]	COVER-TERMINAL (RED)
	315-0180	[1]	TERMINAL-RING (00-GA, 3/8-IN SCREW)
10.	350-2052	[1]	CABLE AS
	1S-7252	[2]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.6-M)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8729	[1]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	177-9645	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	328-8425	[2]	COVER-TERMINAL (RED)
11.	350-2053	[1]	CABLE AS
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.6-M)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9G-0004	[1]	COVER AS-TERMINAL (RED)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	8C-5917	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	177-9648	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	276-1786	[1]	COVER-TERMINAL (RED)
12.	350-2054	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.3-M)
	2L-8077	[2]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	8T-2225 E		TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)
13.	355-5076	[1]	WIRE AS
14.	389-9478	[1]	RECEPTACLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	3S-2093	[1]	STRAP-CABLE
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(1.0-M)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	109-0887 E		SLEEVE (74-CM)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(19-CM)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	159-8050 E		CABLE (00-GA, BLACK)(16-CM)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
		[1]	COVER-TERMINAL
	368-2369 B		TAPE
15.	396-9722	[1]	HARNESS AS-POWER (STARTER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
16.	430-9715	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.9-M)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-4519	[1]	BOOT (RED)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(20-CM)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	194-4046	[1]	COVER AS-TERMINAL (00-GA, POSITIVE, RED)
	368-2369 B		TAPE
17.	091-9035	[1]	SPACER (11X25X20-MM THK)
18.	105-3482 M	[4]	BOLT-SOCKET HEAD (M8X1.25X16-MM)
19.	130-5300	[2]	CLIP
20.	150-4086 M	[4]	SCREW (M4X0.7X16-MM)
21.	4P-7581	[1]	CLIP (LADDER)
22.	4S-1962	[6]	CLIP (LOOP)
23.	5C-2890 M	[4]	NUT (M6X1-THD)
24.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
25.	5P-8939	[6]	GROMMET
26.	6K-8178	[1]	CLIP (LOOP)
27.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
28.	8T-4133 M	[1]	NUT (M10X1.5-THD)
29.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
30.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
31.	8T-4178 M	[1]	BOLT (M10X1.5X90-MM)
32.	8T-4179 M	[5]	BOLT (M12X1.75X20-MM)
33.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
34.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
35.	9M-8406	[12]	CLIP (LOOP)
36.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP49800479

246-5719: WIRING GP-REAR

WIRING GP-REAR

246-5719 WIRING GP-REAR
S/N B9C1-231
PART OF 234-7715 COMMON AR

i02793827 SEBP4980

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	106-0735 Y	[1]	SENSOR GP-TEMPERATURE (TRANSMISSION, HYDRAULIC OIL)
3.	139-2116	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	189-3158	[2]	SUPPRESSOR-ARC
5.	194-6722 Y	[1]	SENSOR GP-PRESSURE (TURBOCHARGER INLET)
6.	197-6453	[1]	BRACKET AS
7.	240-7193	[1]	RESISTOR AS (500-OHM, 2-WATT)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
8.	251-3265	[2]	LINK AS
9.	258-8949	[4]	SPACER (7.5X12X56-MM THK)
10.	264-3086	[2]	BLOCK
11.	264-4389	[1]	CHANNEL AS
12.	266-1467 Y	[2]	SENSOR GP-POSITION (ROTARY)(ARTICULATION ANGLE)
13.	266-6698	[1]	BRACKET
14.	268-8235	[1]	BRACKET AS
15.	279-9658	[2]	LEVER
16.	286-7286	[1]	HARNESS AS-PUMP
17.	286-7287	[1]	HARNESS AS-REAR CHASSIS
18.	286-7289	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	9G-8909	[2]	COVER-TERMINAL (BLACK)
	030-1709	[1]	TERMINAL-RING (0-GA, 1/4-IN SCREW)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(10-CM)
19.	286-7298	[1]	CABLE AS
	8N-0869	[1]	COVER-TERMINAL (RED)
	9X-0195	[1]	TERMINAL-RING (0-GA, 3/8-IN SCREW)
	9X-9120	[1]	BOOT (RED)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(10-CM)
	159-8047 E		CABLE-ELECTRICAL (0-GA, RED)(201-CM)
	170-3794	[1]	RING-TERMINAL
20.	287-6687	[1]	BRACKET AS
21.	288-0701	[1]	WIRE AS
22.	291-2162	[1]	BRACKET AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
23.	301-3034	[1]	PLATE AS
24.	301-7321	[1]	HARNESS AS-SENSOR (ARTICULATION ANGLE)
25.	301-7323	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	4D-1248	[1]	TERMINAL (00-GA, 3/8-IN SCREW)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(40-CM)
	159-8050 E		CABLE (00-GA, BLACK)(22-CM)
26.	302-7325	[1]	HARNESS AS-REAR CHASSIS
27.	033-8248	[6]	CLIP (LOOP)
28.	124-1479	[1]	CLIP
29.	130-5300	[18]	CLIP
30.	132-5789	[9]	CLIP (LADDER)
31.	133-3260	[2]	SPACER (11X19X10-MM THK)
32.	133-6934	[1]	SPACER (11X20X25-MM THK)
33.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
34.	134-3355	[1]	STRAP AS
35.	147-0385	[1]	CLIP
36.	156-6175	[1]	CLIP (LADDER)
37.	166-0690	[2]	BLOCK AS-MOUNTING
38.	174-5907	[2]	CLIP (LOOP)
39.	1P-7009	[1]	CLIP
40.	1S-0994	[1]	CLIP (LOOP)
41.	286-7278	[1]	HARNESS AS-VALVE
42.	2F-7888	[4]	SCREW-MACHINE (10-32X1.25-IN)
43.	3B-4619	[2]	PIN-COTTER
44.	3E-5169	[1]	GUARD-SWITCH
45.	3E-5239	[1]	RELAY AS (24-VOLT)(FUEL PUMP RELAY)
45A.	3E-5239	[1]	RELAY AS (24-VOLT)(BACKUP ALARM)
45B.	3E-5239	[1]	RELAY AS (24-VOLT)(AIR CONDITIONER)
45C.	3E-5239	[1]	RELAY AS (24-VOLT)(SECONDARY STEERING)
46.	3J-1907	[1]	SEAL-O-RING
47.	3K-0360	[1]	SEAL-O-RING
48.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
49.	4D-7388	[2]	CLIP (LOOP)
50.	4D-7794	[4]	CLIP
51.	4D-8123	[1]	CLIP (LOOP)
52.	4D-9517	[1]	CLIP (SLOT)
53.	4K-8864	[8]	CLIP (LOOP)
54.	4P-7429	[1]	CLIP (LADDER)
55.	4P-7581	[7]	CLIP (LADDER)
56.	4S-1962	[2]	CLIP (LOOP)
57.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
58.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
59.	5P-7854	[1]	CLIP (LOOP)
60.	6D-4244	[1]	CLIP (LOOP)
61.	6K-8178	[1]	CLIP (LOOP)
62.	6V-0894	[2]	SEAL-O-RING
63.	6V-1228	[1]	CLIP
64.	6V-1249	[2]	GROMMET (22-MM ID)
65.	6V-1889	[1]	CLIP (LOOP)
66.	6V-7357 M	[2]	BOLT (M6X1X25-MM)
67.	6V-7744 M	[2]	LOCKNUT (M10X1.5-THD)
68.	6W-6672	[1]	SPACER (10.5X20X38-MM THK)
69.	7C-4354	[3]	CLIP
70.	7D-7233	[5]	CLIP (LOOP)
71.	7K-1181	[34]	STRAP-CABLE
72.	7V-6571	[3]	GROMMET
73.	8C-3793	[4]	BOLT (1/4-20X3.75-IN)
74.	8M-2773	[1]	CLIP (LOOP)
75.	8R-0721	[1]	SPACER (11X16X35-MM THK)
76.	8T-4121	[63]	WASHER-HARD (11X21X2.5-MM THK)
77.	8T-4133 M	[1]	NUT (M10X1.5-THD)
78.	8T-4136 M	[19]	BOLT (M10X1.5X25-MM)
79.	8T-4137 M	[33]	BOLT (M10X1.5X20-MM)
80.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
81.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
82.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
83.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
84.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
85.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
86.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
87.	8T-6870 M	[2]	BOLT (M8X1.25X70-MM)
88.	9C-5344	[1]	SPACER (10.5X20X18-MM THK)
89.	9X-8256	[8]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Fuses - Replace
120M and 12M Motor Graders

Circuit Breakers - Reset
120M and 12M Motor Graders

Battery Disconnect Switch
120M and 12M Motor Graders

Engine Shutdown Switch
120M and 12M Motor Graders

Engine Shutdown Switch - Check
120M and 12M Motor Graders

Battery or Battery Cable - Inspect/Replace
120M and 12M Motor Graders

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}

A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}

Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}
Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}

Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}
Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}

Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}
Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Install a Forward Facing Camera on the Front Cover on Certain Motor Graders{1408, 7348}
Procedure to Install a Forward Facing Camera on the Front Cover on Certain Motor Graders{1408, 7348}

Instructions for Reworking the Cross Slope Sensor Bracket on Certain Motor Graders {1408}
Instructions for Reworking the Cross Slope Sensor Bracket on Certain Motor Graders {1408}

Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}

Installation of Rotation Sensor Mounting Brackets and Collar on Certain Motor Graders {1408}
Installation of Rotation Sensor Mounting Brackets and Collar on Certain Motor Graders {1408}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SECONDARY STEERING HARNESS ON CERTAIN 120M AND 12M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SECONDARY STEERING HARNESS ON CERTAIN 120M AND 12M MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINE ON CERTAIN 120M DEFENSE PRODUCTS MOTOR GRADERS AND 12M AND 120M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAT GRADE CONTROL ROTATION SENSOR MOUNTS ON CERTAIN 120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 14M, 160M 2, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAT GRADE CONTROL ROTATION SENSOR MOUNTS ON CERTAIN 120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 14M, 160M 2, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION OIL PRESSURE SENSOR ON CERTAIN 120M, 120M 2, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION OIL PRESSURE SENSOR ON CERTAIN 120M, 120M 2, 140M, 140M 2, 160M, AND 160M 2 MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE ROTATION SENSOR MOUNTING ON CERTAIN MOTOR GRADERS THAT ARE EQUIPPED WITH CAT CROSS SLOPE
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ROTATION SENSOR MOUNTING ON CERTAIN MOTOR GRADERS THAT ARE EQUIPPED WITH CAT CROSS SLOPE

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}
Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}

Specifications

Magnetic Switch (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Solenoid Valve (Hydraulic Fan)
120M and 12M Motor Graders Braking and Hydraulic Fan System

Pressure Sensor (Brake Oil Accumulator) - Use with the <B>251-8256</B> Control Manifold Gp
120M and 12M Motor Graders Braking and Hydraulic Fan System

Temperature Sensor (Transmission Oil)
120M, 12M, 140M and 160M Motor Graders Power Train

Speed Sensor (Transmission) - Intermediate
120M, 12M, 140M and 160M Motor Graders Power Train

Pressure Sensor (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Toggle Switch (Ground Level Shutdown)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Speed Sensor (Transmission) - Input and Output
120M, 12M, 140M and 160M Motor Graders Power Train

Ball Switch (Centershift Indicator)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train

Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Pressure Sensor (Brake Oil Accumulator)
120M and 12M Motor Graders Braking and Hydraulic Fan System

Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Electrical Connector - Inspect
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Electric Starting System - Test
C6.6 Engines for Caterpillar Built Machines

Magnetic Switch (Secondary Steering Relay) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Electrical Connector - Inspect
AccuGrade® GPS v11 for CD700

Wiring Harness (Open Circuit) - Test
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

Wiring Harness (Short Circuit) - Test
AccuGrade® GPS v11 for CD700

Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Electrical Connector - Inspect
Cat^® Grade Control Cross Slope System for Motor Graders

Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Electrical Connector - Inspect
AccuGrade^® (CD610)

Wiring Harness (Open Circuit) - Test
AccuGrade^® (CD610)

Wiring Harness (Short Circuit) - Test
AccuGrade^® (CD610)

Connector Contact Description
AccuGrade^® (CD610)

Connector Contact Description
AccuGrade® GPS v11 for CD700

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

System Schematic
MSS3s Machine Security System

Connector Contact Description
Cat^® Grade Control Cross Slope System for Motor Graders

Troubleshooting

Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0070 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0070 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Switch Circuits
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 082 - CID 0490 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0490 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 0368 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0368 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Electrical Power Supply
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 114 - CID 1396 - FMI 03
AccuGrade® GPS v11 for CD700

MID 114 - CID 1396 - FMI 05
AccuGrade® GPS v11 for CD700

MID 114 - CID 1396 - FMI 06
AccuGrade® GPS v11 for CD700

MID 027 - CID 2304 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2304 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2304 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0627 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0627 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Electrical Connectors - Inspect
C6.6 Engines For Caterpillar Built Machines

ECM Harness Connector Terminals
C6.6 Engines For Caterpillar Built Machines

CID 0168 FMI 00
C6.6 Engines For Caterpillar Built Machines

CID 0168 FMI 01
C6.6 Engines For Caterpillar Built Machines

CID 0172 FMI 03
C6.6 Engines For Caterpillar Built Machines

CID 0172 FMI 04
C6.6 Engines For Caterpillar Built Machines

Connector Locations
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

CID 0168 FMI 02
C6.6 Engines For Caterpillar Built Machines

CID 1785 FMI 03
C6.6 Engines For Caterpillar Built Machines

CID 1785 FMI 04
C6.6 Engines For Caterpillar Built Machines

CID 1785 FMI 10
C6.6 Engines For Caterpillar Built Machines

CID 1834 FMI 02
C6.6 Engines For Caterpillar Built Machines

Sensors and Electrical Connectors
C6.6 Engines For Caterpillar Built Machines

Engine Wiring Information
C6.6 Engines For Caterpillar Built Machines

CAN Data Link
AccuGrade^® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders

MID 145 - CID 0650 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 145 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

CID 0168 FMI 03
C6.6 Engines For Caterpillar Built Machines

CID 0168 FMI 04
C6.6 Engines For Caterpillar Built Machines

Ignition Keyswitch Circuit and Battery Supply Circuit - Test
C6.6 Engines For Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

MID 027 - CID 2976 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2976 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2976 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
Cat^® Grade Control Cross Slope System for Motor Graders

Wiring Harness (Short Circuit) - Test
Cat^® Grade Control Cross Slope System for Motor Graders

Disassembly and Assembly

Battery - Remove and Install
120M and 12M Motor Graders Engine Supplement

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

A new Cab Wiring Group Updates the Cab Arrangement {1408, 7301, 7332}
2008/10/13

New Parts Update the Rear Wiring Group {1408}
2009/02/23

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2011/01/06

A New Circuit Breaker and a Cover are Available for the High Intensity Discharge Lights on Certain Motor Graders {1420, 1434}
2009/12/21

New Wiring Harnesses Are Now Used on Certain M-Series Motor Graders {1408}
2010/02/10

A New Design for the Secondary Steering Relay is Now Used on Some M-Series Motor Graders {1408, 4344, 7499}
2009/12/24

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

New Steering Cylinder Sensor Harnesses are now Available for Certain M Series Motor Graders {1408}
2011/05/09

An Improved Flasher Assembly Is Now Used On Certain M Series and M 2 Series Motor Graders {1430, 4493}
2011/09/28

Heated Anti-Icing Glass is Now Available for Certain M and M Series 2 Motor Graders {1408, 7305, 7308, 7310}
2011/12/26

Improvements Have Been Made to the Steering Position Sensing System on Certain M Series Motor Graders {1408, 430S, 7620}
2012/01/11

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

New Cable Strap and Cable Tie Mounting for the Rear Wiring Group is Now Used on Certain Motor Graders {1408}
2012/12/11

New Joystick Kit Is Now Available as a Service Replacement for Push Button Faceplate on Certain M Series and M Series 2 Motor Graders {1408, 3168, 4343, 5063, 5705}
2013/06/13

A New Flasher Assembly for the Turn Signal Is Now Available for Certain M and M Series 2 Motor Graders {1408}
2014/01/15

An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/11/12

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

New Lighting Harness As Is Now Available for Certain M Series, and M Series 2 Motor Graders {1408, 1429}
New Lighting Harness As Is Now Available for Certain M Series, and M Series 2 Motor Graders {1408, 1429}

A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}
A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}

Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}
Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Special Instruction, "Instructions for Reworking the Cross Slope Sensor Bracket on Certain Motor Graders", is Now Available {1408}
Special Instruction, "Instructions for Reworking the Cross Slope Sensor Bracket on Certain Motor Graders", is Now Available {1408}

A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}

New AccuGrade Brackets are Now Used on Certain K and M Series Motor Graders {1408}
New AccuGrade Brackets are Now Used on Certain K and M Series Motor Graders {1408}

The Grade Control Wiring Harness and related components have been updated on Certain Motor Graders {1408}
The Grade Control Wiring Harness and related components have been updated on Certain Motor Graders {1408}

New Collar and Longer Screw Hardware Improvement is Now Available for RS400 Rotation Sensor on Certain Motor Graders {1408}
New Collar and Longer Screw Hardware Improvement is Now Available for RS400 Rotation Sensor on Certain Motor Graders {1408}

Caterpillar Parts SIS Catalog 120M :

356-3635 WIRING GP-FRONT

246-5725 WIRING GP-FRONT

246-5721 WIRING GP-FRONT

246-5718 WIRING GP-FRONT

335-9447 WIRING GP-FAN

356-3638 WIRING GP-GRADE CONTROL

291-2909 WIRING GP-LIGHTING

292-1874 WIRING GP-LIGHTING

253-1964 WIRING GP-MONITOR

253-1967 WIRING GP-MONITOR

352-1595 WIRING GP-POWER RECEPTACLE

431-4286 WIRING GP-POWER RECEPTACLE

Truck sale:

212,000

Caterpillar 120M2, Construction
- motor graders

317,000

Caterpillar 120M2, Construction
- motor graders
HOLT CAT

On Request

Caterpillar 120M2, Construction
- motor graders
BERGERAT MONNOYEUR S.A.S.
France

Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.