AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

452-3132 EXTENSION GP-BLADE -LH S/N B9C1-UP 2-FT CANNOT BE USED WITH ANY OTHER EXTENSION GP, ACCUGRADE AR, GRADER AR, 12-FT BLADE PACKAGE, 14-FT BLADE PACKAGE AN ATTACHMENT 120M


WORK TOOLS
BLADE GP
HYDRAULIC SYSTEM
LIFT GP
WORK TOOLS
RIPPER GP

MOTOR GRADER 120M MOTOR GRADER B9C
 120M Motor Grader B9C00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4980 120M B9C   (2007)

WORK TOOLS

BLADE GP
EXTENSION GP-BLADE
110-5327 EXTENSION GP-BLADE
EXTENSION GP-BLADE
243-6685 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3132 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3133 EXTENSION GP-BLADE
524-8603 EXTENSION GP-BLADE
524-8604 EXTENSION GP-BLADE
 

#SEBP49801400
 

452-3132: EXTENSION GP-BLADE

452-3132 EXTENSION GP-BLADE -LH
S/N B9C1-UP
2-FT
CANNOT BE USED WITH ANY OTHER EXTENSION GP, ACCUGRADE AR, GRADER AR, 12-FT BLADE PACKAGE, 14-FT BLADE PACKAGE
AN ATTACHMENT
i05841314 SEBP4980
4523132 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-7524 [1] EXTENSION  
2. 3G-2165 [1] EDGE-CUTTING  
3. 452-3134 [1] PLATE AS  
4. 110-5334 [3] SPACER (3-MM THK)  
5. 452-3137 [1] ANGLE AS  
6. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
7. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
8. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
9. 2A-1538 [2] BOLT (3/4-10X2.25-IN)  
10. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP49801401
 

452-3133: EXTENSION GP-BLADE

452-3133 EXTENSION GP-BLADE -LH
S/N B9C1-UP
2-FT
CANNOT BE USED WITH ANY OTHER EXTENSION GP, ACCUGRADE AR, GRADER AR, 14-FT BLADE PACKAGE
AN ATTACHMENT
i05841315 SEBP4980
4523133 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-5334 [2] SPACER (3-MM THK)  
2. 452-3137 [1] ANGLE AS  
3. 176-5642 B [1] SPACER (2-MM THK)  
4. 176-5643 B [2] SPACER (1-MM THK)  
5. 232-2146 [1] EDGE-CUTTING  
6. 250-0613 [1] EXTENSION  
7. 452-3135 [1] PLATE AS  
8. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
9. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
10. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
11. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
12. 9X-8885 [2] BOLT (3/4-10X2.25-IN)  
  B   USE AS REQUIRED
 

#SEBP49801402
 

524-8603: EXTENSION GP-BLADE

524-8603 EXTENSION GP-BLADE
S/N B9C1-UP
BLADE EXTENSION ATTACHMENT KIT
FIELD INSTALLATION
i06922559 SEBP4980
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  452-3137 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  232-2146 [1] EDGE-CUTTING  
  250-0613 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  452-3135 [1] PLATE AS  
  110-5334 [2] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP49801403
 

524-8604: EXTENSION GP-BLADE

524-8604 EXTENSION GP-BLADE
S/N B9C1-UP
BLADE ATTACHMENT KIT
FIELD INSTALLATION
i06922561 SEBP4980
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  452-3137 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-2165 [1] EDGE-CUTTING  
  133-7524 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  452-3134 [1] PLATE AS  
  110-5334 [3] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP49801404
 

265-1100: LIFT GP-BLADE

265-1100 LIFT GP-BLADE
S/N B9C1-425
PART OF 234-7715 COMMON AR
i02793412 SEBP4980
2651100 LIFT GP-BLADE Parts scheme 2651100 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8X-2881 [2] LOCK  
7. 8X-4644 [1] STUD-BALL  
8. 8X-4884 [1] PIN  
9. 8X-5028 [1] BAR AS  
  8X-5021 [2] BEARING  
10. 9D-1530 B [2] WASHER-THRUST (2.265X4.5X0.075-IN THK)  
11. 9D-2753 [2] LOCK  
12. 124-0360 B [2] WASHER-THRUST (57.5X114.3X1-MM THK)  
13. 261-8541 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
14. 261-8543 [2] RETAINER  
15. 265-1094 [1] ARM AS (LH)  
16. 265-1095 [1] ARM AS (RH)  
    (EACH ARM AS INCLUDES)
  7D-8889 [1] BEARING (76.35-MM ID)  
  8D-8168 [1] BEARING (63.65-MM ID)  
17. 265-1096 [2] PIN  
18. 288-0735 M [1] BOLT (M12X1.75X60-MM)  
19. 129-7261 [1] PLATE  
20. 279-6632 [5] WASHER (13.5X25.5X3-MM THK)  
21. 5F-0149 [2] SEAL-O-RING  
22. 259-2627 M [4] BOLT (M12X1.75X40-MM)  
23. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
24. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
25. 7D-8883 [2] SEAL  
26. 7D-8884 [2] SEAL  
27. 7H-2444 [2] SEAL-O-RING  
28. 7K-9203 [4] SEAL-LIP TYPE  
29. 7X-2565 M [4] BOLT (M20X2.5X100-MM)  
30. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
31. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
32. 8T-4131 M [4] NUT (M20X2.5-THD)  
33. 8T-4175 M [4] BOLT (M16X2X90-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49801405
 

302-6330: LIFT GP-BLADE

302-6330 LIFT GP-BLADE
S/N B9C426-UP
PART OF 234-7715, 349-2548 COMMON AR
i02939568 SEBP4980
3026330 LIFT GP-BLADE Parts scheme 3026330 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8X-2881 [2] LOCK  
7. 8X-4644 [1] STUD-BALL  
8. 8X-4884 [1] PIN  
9. 399-4567 [1] BAR AS  
9A. 382-4604 [1] BUSHING  
9B. 8X-5021 [2] BEARING  
10. 9D-1530 B [2] WASHER-THRUST (2.265X4.5X0.075-IN THK)  
11. 9D-2753 [2] LOCK  
12. 124-0360 B [6] WASHER-THRUST (57.5X114.3X1-MM THK)  
13. 8T-0558 M [4] BOLT-SELF-LOCKING (M12X1.75X50-MM)  
14. 261-8541 [2] YOKE AS  
    (EACH INCLUDES)
14A. 2G-8233 [1] RING  
15. 261-8543 [2] RETAINER  
16. 265-1096 [2] PIN  
17. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
18. 302-6326 [1] ARM AS (RH)  
18A. 7D-8889 [1] BEARING (76.35-MM ID)  
18B. 8D-8168 [1] BEARING (63.65-MM ID)  
19. 302-6328 [1] ARM AS (LH)  
19A. 7D-8889 [1] BEARING (76.35-MM ID)  
19B. 8D-8168 [1] BEARING (63.65-MM ID)  
20. 129-7261 [1] PLATE  
21. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 5F-0149 [2] SEAL-O-RING  
23. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
24. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
25. 7D-8883 [2] SEAL  
26. 7D-8884 [2] SEAL  
27. 7H-2444 [2] SEAL-O-RING  
28. 7K-9203 [4] SEAL-LIP TYPE  
29. 7X-2565 M [4] BOLT (M20X2.5X100-MM)  
30. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
31. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
32. 8T-4131 M [4] NUT (M20X2.5-THD)  
33. 7X-2556 M [4] BOLT (M16X2X100-MM)  
34. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49801406
 

293-5556: LIFT GP-WORK TOOL

293-5556 LIFT GP-WORK TOOL
S/N B9C1-UP
PART OF 312-2204 LIFT GP-WORK TOOL
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
AN ATTACHMENT
i02788557 SEBP4980
2935556 LIFT GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-6762 [4] BOLT (1-1/2-12X4.5-IN)  
2. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
3. 3B-8489 [11] FITTING-GREASE (1/8-27 PTF)  
4. 4H-6511 [1] BOLT (1-1/4-12X6.5-IN)  
5. 5F-9891 [4] BOLT (1-1/2-12X6-IN)  
6. 9X-2521 [8] NUT-FULL  
7. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
8. 170-4910 [1] FRAME AS-COUPLER  
9. 172-8121 [2] SPACER (34.925X60.325X14.2-MM THK)  
10. 172-8122 [2] PIN AS  
11. 172-8125 [3] PIN (SNAP)  
12. 172-8126 [1] FILM-WARNING (CRUSH HAZARD)  
13. 172-8127 [1] PIN AS (LOCKING)  
14. 172-8287 I [1] HOSE AS  
15. 172-8288 I [1] HOSE AS  
16. 194-3655 [2] BEARING GP  
17. 195-3330 [1] PLATE AS-MOUNTING  
18. 217-3501 Y [1] CYLINDER GP-HYDRAULIC (WORK TOOL LIFT)  
19. 284-7971 [1] ARM AS (LOWER)  
20. 284-7972 [1] ARM AS (UPPER)  
22. 2M-9780 [4] SEAL-O-RING  
23. 3J-1907 [4] SEAL-O-RING  
24. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 6V-8397 [4] SEAL-O-RING  
26. 6V-8636 [1] CONNECTOR  
27. 6V-8724 [3] ELBOW (90-DEG)  
28. 9X-8875 [4] BOLT (1/2-13X3.5-IN)  
   
  293-5559 FY [1] BRACE GP (WORK TOOL LIFT)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP49801407
 

312-2204: LIFT GP-WORK TOOL

312-2204 LIFT GP-WORK TOOL
S/N B9C1-UP
CANNOT BE USED WITH @@@@@250-3071@@@@@, @@@@@309-6809@@@@@, @@@@@351-5178@@@@@
AN ATTACHMENT
i02788354 SEBP4980
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  293-5556 Y [1] LIFT GP-WORK TOOL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49801408
 

201-7371: MOUNTING GP-RIPPER

201-7371 MOUNTING GP-RIPPER
S/N B9C1-UP
PART OF 201-7352 RIPPER AR
AN ATTACHMENT
i01683698 SEBP4980
2017371 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [2] SPACER (47X80X20-MM THK)  
2. 6P-5647 [2] BOSS  
3. 104-4523 [2] CAM AS  
4. 113-0995 [2] LINK AS  
  2K-4233 [1] BOSS  
5. 144-8001 [2] SHIM (3-MM THK)  
6. 201-6614 [1] PLATE AS  
7. 113-0993 [1] PIN  
8. 124-6679 [2] PIN  
9. 1K-6872 [3] LOCKNUT (1/2-13-THD)  
10. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
11. 7X-0293 [2] BOLT (3/8-16X4.75-IN)  
12. 7X-0331 [3] BOLT (1/2-13X4.25-IN)  
13. 7X-0403 [10] BOLT (1-8X2.25-IN)  
14. 8J-3326 [2] PIN  
15. 8T-5361 [10] WASHER-HARD (28X49X5-MM THK)  
16. 8T-9378 [2] BOLT (3/8-16X4-IN)  
17. 9J-0090 [2] PIN  
 

#SEBP49801409
 

265-5265: MOUNTING GP-RIPPER

265-5265 MOUNTING GP-RIPPER
S/N B9C1-UP
PART OF 265-5264 RIPPER AR
CANNOT BE USED WITH @@@@@265-5264@@@@@, @@@@@269-0477@@@@@, @@@@@296-3527@@@@@, @@@@@264-2392@@@@@
AN ATTACHMENT
i02829261 SEBP4980
2655265 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [4] SPACER (47X80X20-MM THK)  
2. 104-4523 [2] CAM AS  
3. 266-5358 [1] PLATE AS  
4. 286-1315 [2] LINK AS  
    (EACH INCLUDES)
  2K-4233 [1] BOSS  
5. 286-1320 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
6. 299-2432 [2] PIN  
7. 106-4175 M [8] BOLT (M20X2.5X60-MM)  
8. 109-6776 [2] PIN  
9. 113-0993 [1] PIN  
10. 129-3180 M [3] LOCKNUT (M12X1.75-THD)  
11. 267-3506 [6] WASHER-HARD (26X44X4-MM THK)  
12. 267-3508 [8] WASHER-HARD (22X35X3.5-MM THK)  
13. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
14. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
15. 7X-2549 M [3] BOLT (M12X1.75X100-MM)  
16. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
17. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
18. 8T-4198 M [2] BOLT (M10X1.5X100-MM)  
19. 9J-0090 [2] PIN  
20. 9X-2615 M [6] BOLT (M24X3X60-MM)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Moldboard Blade
120M and 12M Motor Graders
Moldboard Wear Strip - Inspect/Adjust/Replace
120M and 12M Motor Graders
Special Instruction
Instructions for Installing New Mounting Components for Rotation Sensor on Certain Motor Graders Equipped With Cat<SUP>&reg;</SUP> Grade Control{5060, 6151, 7220}
Instructions for Installing New Mounting Components for Rotation Sensor on Certain Motor Graders Equipped With Cat® Grade Control{5060, 6151, 7220}
Specifications
Blade Lift
120M, 12M, 140M and 160M Motor Graders Machine Systems
Systems Operation
Blade Cushion - If Equipped
120M and 12M Motor Graders Hydraulic and Steering System
Troubleshooting
MID 082 - CID 0908 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 0908 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 3694 - FMI 09
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 3694 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
Disassembly and Assembly
Blade - Remove and Install
120M and 12M Motor Grader Machine Systems
Blade Lift Arm - Remove
120M and 12M Motor Grader Machine Systems
Blade Lift Arm - Install
120M and 12M Motor Grader Machine Systems
Service Magazine
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Improvement For The AccuGrade<SUP>&reg;</SUP> Rotation Sensor On The M-Series Motor Graders {5060, 6151, 7220}
2009/11/18
Additional Sleeve Bearings can be Installed in the Blade Mounting Groups on Certain Motor Graders {6151}
2014/03/19
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
New Blade Mounting Group Wear Strips are Now Available On Certain H, M, and M Series 2 Motor Graders {6151}
2013/11/22

Caterpillar Parts SIS Catalog 120M :

EXTENSION GP-BLADE
243-6685 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5327 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5326 EXTENSION GP-BLADE
EDGE-CUTTING
349-0883 EDGE-CUTTING
EDGE-CUTTING
346-3285 EDGE-CUTTING
EDGE-CUTTING
132-1072 EDGE-CUTTING
233-7144 EDGE GP-CUTTING
233-7143 EDGE GP-CUTTING
EXTENSION GP-BLADE
452-3133 EXTENSION GP-BLADE
524-8603 EXTENSION GP-BLADE
524-8604 EXTENSION GP-BLADE
LIFT GP-BLADE
265-1100 LIFT GP-BLADE
LIFT GP-BLADE
302-6330 LIFT GP-BLADE
LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
312-2204 LIFT GP-WORK TOOL
MOUNTING GP-RIPPER
201-7371 MOUNTING GP-RIPPER

Truck sale:

 
212,000 
Caterpillar 120M2, Construction
- motor graders

Caterpillar 120M2, Construction
317,000 
Caterpillar 120M2, Construction
- motor graders
HOLT CAT
 
On Request 
Caterpillar 120M2, Construction
- motor graders
BERGERAT MONNOYEUR S.A.S.
France
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.