ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP49830500
434-8053: WIRING GP-GRADE CONTROL
434-8053 WIRING GP-GRADE CONTROL
S/N JJA1-3526
PART OF 435-1549 GRADE CONTROL AR
S/N JJA1-3526
PART OF 435-1549 GRADE CONTROL AR
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [22] | STRAP-CABLE | |
| 2. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 3. | 9L-1566 | [2] | SUPPORT | |
| 4. | 9W-1446 | [1] | FUSE (20-AMPERE) | |
| 5. | 132-8487 | [4] | NUT-RING | |
| 6. | 169-5414 | [1] | CLIP | |
| 7. | 236-2356 Y | [1] | HARNESS AS-SENSOR (ANGLE) | |
| 8. | 236-8826 | [4] | BOSS (1-1/8-18X0.708-IN) | |
| 9. | 243-3250 Y | [1] | HARNESS AS-SENSOR (ROTATION) | |
| 10. | 244-5880 | [1] | BRACKET | |
| 11. | 255-3482 | [1] | BRACKET | |
| 12. | 260-7647 Y | [1] | APPLICATION GP-POWER TRAIN | |
| 13. | 288-5508 | [1] | BRACKET AS (LH) | |
| 14. | 288-5509 | [1] | BRACKET AS (RH) | |
| 15. | 313-4670 | [1] | BRACKET AS | |
| 16. | 323-5592 Y | [1] | HARNESS AS-CHASSIS | |
| 17. | 324-3364 | [1] | PLATE | |
| 18. | 324-3366 | [1] | PLATE AS | |
| 19. | 327-0560 | [1] | BRACKET (RH) | |
| 20. | 327-0561 | [1] | BRACKET (LH) | |
| 21. | 331-1102 | [1] | BRACKET AS | |
| 22. | 339-5505 Y | [1] | HARNESS AS-CHASSIS (FRONT FRAME, REAR) | |
| 23. | 339-5506 Y | [1] | HARNESS AS-CHASSIS (FRONT FRAME, LH) | |
| 24. | 033-8248 | [1] | CLIP (LOOP) | |
| 25. | 111-4871 | [2] | RELAY (24-VOLT) | |
| 26. | 130-5300 | [4] | CLIP | |
| 27. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 28. | 147-0385 | [1] | CLIP | |
| 29. | 174-5907 | [1] | CLIP (LOOP)(LOOP) | |
| 30. | 174-9692 | [4] | SPACER (20.5X35X16-MM THK) | |
| 31. | 1J-6762 | [4] | BOLT-PLOW (3/4-10X3-IN) | |
| 32. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
| 33. | 1P-7009 | [2] | CLIP | |
| 34. | 2Y-3812 | [1] | CLIP | |
| 35. | 3P-2404 | [1] | CLIP | |
| 36. | 4D-7794 | [1] | CLIP | |
| 37. | 4K-8302 | [2] | CLIP (LOOP)(LOOP) | |
| 38. | 4K-8864 | [2] | CLIP (LOOP)(LOOP) | |
| 39. | 4S-1962 | [6] | CLIP (LOOP)(LOOP) | |
| 40. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 41. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 42. | 5M-3062 | [27] | BOLT (3/8-16X0.75-IN) | |
| 43. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
| 44. | 5P-9085 | [1] | CLIP (LOOP)(LOOP) | |
| 45. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 46. | 6D-3033 | [16] | SCREW-SOCKET HEAD (4-40X0.5-IN) | |
| 47. | 6D-4244 | [4] | CLIP (LOOP)(LOOP) | |
| 48. | 6K-8178 | [1] | CLIP (LOOP)(LOOP) | |
| 49. | 6V-1889 | [7] | CLIP (LOOP)(LOOP) | |
| 50. | 6V-8182 | [4] | NUT (3/4-10-THD) | |
| 51. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 52. | 7X-0550 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 53. | 7X-0579 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 54. | 7X-0619 | [4] | WASHER-HARD (20X30X2.5-MM THK) | |
| 55. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 56. | 7Y-0589 M | [2] | BOLT (M12X1.75X90-MM) | |
| 57. | 8C-6857 | [4] | BOLT (3/4-10X2.75-IN) | |
| 58. | 8M-2773 | [4] | CLIP (LOOP)(LOOP) | |
| 59. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 60. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 61. | 8T-4137 M | [13] | BOLT (M10X1.5X20-MM) | |
| 62. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 63. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 64. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 65. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 66. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 67. | 8T-4896 | [31] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 68. | 8T-6869 M | [4] | BOLT (M8X1.25X60-MM) | |
| 69. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 70. | 9M-8406 | [4] | CLIP (LOOP)(LOOP) | |
| 71. | 9X-8250 | [1] | CLIP (LOOP) | |
| 72. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49830501
434-8053: WIRING GP-GRADE CONTROL
434-8053 WIRING GP-GRADE CONTROL
S/N JJA3527-UP
PART OF 435-1549 GRADE CONTROL AR
S/N JJA3527-UP
PART OF 435-1549 GRADE CONTROL AR
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 C | [23] | STRAP-CABLE | |
| 2. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 3. | 9L-1566 | [2] | SUPPORT | |
| 4. | 9W-1446 | [1] | FUSE (20-AMPERE) | |
| 5. | 132-8487 | [4] | NUT-RING | |
| 6. | 169-5414 | [1] | CLIP | |
| 7. | 236-2356 Y | [1] | HARNESS AS-SENSOR (ANGLE) | |
| 8. | 236-8826 | [4] | BOSS (1-1/8-18X0.708-IN) | |
| 9. | 243-3250 Y | [1] | HARNESS AS-SENSOR (ROTATION) | |
| 10. | 244-5880 | [1] | BRACKET | |
| 11. | 255-3482 | [1] | BRACKET | |
| 12. | 304-5687 | [1] | CONTROL GP-UNPROGRAMMED | |
| 13. | 516-2801 C | [1] | BRACKET AS (LH) | |
| 14. | 516-2802 C | [1] | BRACKET AS (RH) | |
| 15. | 313-4670 | [1] | BRACKET AS | |
| 16. | 323-5592 Y | [1] | HARNESS AS-CHASSIS (ROTATION, INCLINATION) | |
| 17. | 324-3364 | [1] | PLATE | |
| 18. | 324-3366 | [1] | PLATE AS | |
| 19. | 327-0560 | [1] | BRACKET (RH) | |
| 20. | 327-0561 | [1] | BRACKET (LH) | |
| 21. | 331-1102 | [1] | BRACKET AS | |
| 22. | 339-5505 Y | [1] | HARNESS AS-CHASSIS (FRONT FRAME, REAR) | |
| 23. | 339-5506 Y | [1] | HARNESS AS-CHASSIS (FRONT FRAME, LH) | |
| 24. | 033-8248 | [1] | CLIP (LOOP) | |
| 25. | 111-4871 | [1] | RELAY (24-VOLT)(IMPLEMENT) | |
| 25A. | 111-4871 | [1] | RELAY (24-VOLT)(POWER MODULE) | |
| 26. | 130-5300 | [4] | CLIP | |
| 27. | 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | |
| 28. | 147-0385 | [1] | CLIP | |
| 29. | 174-5907 | [1] | CLIP (LOOP) | |
| 30. | 174-9692 | [4] | SPACER (20.5X35X16-MM THK) | |
| 31. | 1J-6762 | [4] | BOLT-PLOW (3/4-10X3-IN) | |
| 32. | 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | |
| 33. | 1P-7009 | [2] | CLIP | |
| 34. | 2Y-3812 | [1] | CLIP | |
| 35. | 352-3964 C | [1] | CLIP (LADDER) | |
| 36. | 4D-7794 | [1] | CLIP | |
| 37. | 4K-8302 | [2] | CLIP (LOOP) | |
| 38. | 4K-8864 | [2] | CLIP (LOOP) | |
| 39. | 4S-1962 | [6] | CLIP (LOOP) | |
| 40. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 41. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 42. | 5M-3062 | [27] | BOLT (3/8-16X0.75-IN) | |
| 43. | 5P-4135 | [1] | BOLT (3/4-10X8-IN) | |
| 44. | 5P-9085 | [1] | CLIP (LOOP) | |
| 45. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 46. | 107-1716 C | [16] | SCREW (4-1/2-40X0.63-IN) | |
| 47. | 6D-4244 | [4] | CLIP (LOOP) | |
| 48. | 6K-8178 | [1] | CLIP (LOOP) | |
| 49. | 6V-1889 | [7] | CLIP (LOOP) | |
| 50. | 6V-8182 | [4] | NUT (3/4-10-THD) | |
| 51. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 52. | 7X-0550 | [8] | WASHER-HARD (13.5X32X5-MM THK) | |
| 53. | 7X-0579 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 54. | 7X-0619 | [4] | WASHER-HARD (20X30X2.5-MM THK) | |
| 55. | 7X-7729 | [3] | WASHER (11X25X3-MM THK) | |
| 56. | 7Y-0589 M | [2] | BOLT (M12X1.75X90-MM) | |
| 57. | 8C-6857 | [4] | BOLT (3/4-10X2.75-IN) | |
| 58. | 8M-2773 | [4] | CLIP (LOOP) | |
| 59. | 8T-4121 | [14] | WASHER-HARD (11X21X2.5-MM THK) | |
| 60. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 61. | 8T-4137 M | [13] | BOLT (M10X1.5X20-MM) | |
| 62. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 63. | 8T-0558 M | [4] | BOLT-SELF-LOCKING (M12X1.75X50-MM) | |
| 64. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 65. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 66. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 67. | 8T-4896 | [31] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 68. | 8T-6869 M | [4] | BOLT (M8X1.25X60-MM) | |
| 69. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 70. | 9M-8406 | [4] | CLIP (LOOP) | |
| 71. | 9X-8250 | [1] | CLIP (LOOP) | |
| 72. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 73. | 241-8488 | [1] | PLATE | |
| 74. | 225-3109 M | [1] | SCREW-TRUSS HEAD (M4X0.7X14-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49830502
528-1021: WIRING GP-GRADE CONTROL
528-1021 WIRING GP-GRADE CONTROL -BLADE SLOPE
S/N JJA20100-UP
DRAWBAR
PART OF 533-1247, 547-8995 OPTION AR-CIRCLE
S/N JJA20100-UP
DRAWBAR
PART OF 533-1247, 547-8995 OPTION AR-CIRCLE
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [12] | STRAP-CABLE | |
| 2. | 150-5785 | [2] | DOWEL | |
| 3. | 501-1450 | [1] | SENSOR AS-POSITION (INERTIAL MEASUREMENT UNIT) | |
| 4. | 528-1022 Y | [1] | HARNESS AS-WIRING (BLADE SLOPE) | |
| 5. | 533-1187 | [1] | BRACKET-SENSOR (GRADE CONTROL) | |
| 6. | 533-5116 | [1] | PLATE | |
| 7. | 551-1681 Y | [1] | HARNESS AS-SENSOR (BLADE SLOPE) | |
| 8. | 130-5300 | [2] | CLIP | |
| 9. | 329-3356 M | [1] | NUT (M12X1.75-THD) | |
| 10. | 344-5675 M | [3] | NUT (M10X1.5-THD) | |
| 11. | 4P-7428 | [1] | CLIP (LADDER)(LADDER) | |
| 12. | 4P-7581 | [6] | CLIP (LADDER) | |
| 13. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 14. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| 15. | 6D-4244 | [2] | CLIP (LOOP)(LOOP) | |
| 16. | 7X-2537 M | [3] | BOLT (M8X1.25X35-MM) | |
| 17. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-4176 M | [1] | BOLT (M12X1.75X90-MM) | |
| 20. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 21. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 23. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 24. | 8T-5005 M | [3] | BOLT (M10X1.5X70-MM) | |
| 25. | 9X-8250 | [1] | CLIP (LOOP) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49830503
551-1811: WIRING GP-GRADE CONTROL
551-1811 WIRING GP-GRADE CONTROL -BLADE SLOPE
S/N JJA20100-UP
DRAWBAR
PART OF 533-1252 OPTION AR-CIRCLE
S/N JJA20100-UP
DRAWBAR
PART OF 533-1252 OPTION AR-CIRCLE
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [13] | STRAP-CABLE | |
| 2. | 150-5785 | [2] | DOWEL | |
| 3. | 501-1450 | [1] | SENSOR AS-POSITION (INERTIAL MEASUREMENT UNIT) | |
| 4. | 528-1022 Y | [1] | HARNESS AS-WIRING (BLADE SLOPE) | |
| 5. | 533-1187 | [1] | BRACKET-SENSOR | |
| 6. | 533-5116 | [1] | PLATE | |
| 7. | 551-1681 Y | [1] | HARNESS AS-SENSOR (BLADE SLOPE) | |
| 8. | 130-5300 | [2] | CLIP | |
| 9. | 329-3356 M | [1] | NUT (M12X1.75-THD) | |
| 10. | 344-5675 M | [3] | NUT (M10X1.5-THD) | |
| 11. | 352-3970 | [1] | CLIP (LADDER) | |
| 12. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 4P-7581 | [6] | CLIP (LADDER) | |
| 14. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 15. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| 16. | 6D-4244 | [4] | CLIP (LOOP) | |
| 17. | 7X-2537 M | [3] | BOLT (M8X1.25X35-MM) | |
| 18. | 8T-4121 | [13] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 20. | 8T-4176 M | [1] | BOLT (M12X1.75X90-MM) | |
| 21. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 22. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 25. | 8T-5005 M | [3] | BOLT (M10X1.5X70-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49830504
528-3430: WIRING GP-MONITOR
528-3430 WIRING GP-MONITOR -INDICATION DISPLAY
S/N JJA20100-UP
PART OF 533-4521, 533-4522 OPTION AR-REGIONAL
Type 1
S/N JJA20100-UP
PART OF 533-4521, 533-4522 OPTION AR-REGIONAL
Type 1
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 3. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 4. | 100-3245 | [2] | LAMP (24-VOLT, 0.17-AMPERE) | |
| 5. | 386-1372 | [1] | MODULE GP-DISPLAY (INSTRUMENT CLUSTER) | |
| 364-8277 | [1] | FILM-IDENTIFICATION (CAT) | ||
| 552-3605 | [1] | SOFTWARE GP-MONITOR (INSTRUMENT PANEL) | ||
| 6. | 528-3431 Y | [1] | HARNESS AS-PANEL (INSTRUMENT PANEL) | |
| 7. | 263-5928 M | [8] | SCREW-TRUSS HEAD (M5X0.8X25-MM) | |
| 8. | 4P-7581 | [2] | CLIP (LADDER) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49830505
528-3430: WIRING GP-MONITOR
528-3430 WIRING GP-MONITOR -INDICATION DISPLAY
S/N JJA20100-UP
PART OF 533-4521, 533-4522 OPTION AR-REGIONAL
Type 2
S/N JJA20100-UP
PART OF 533-4521, 533-4522 OPTION AR-REGIONAL
Type 2
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [2] | STRAP-CABLE | |
| 2. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 3. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 4. | 100-3245 | [2] | LAMP (24-VOLT, 0.17-AMPERE) | |
| 5. | 516-6868 C | [1] | DISPLAY GP-MONITOR | |
| 364-8277 | [1] | FILM-IDENTIFICATION (CAT) | ||
| 552-3605 | [1] | SOFTWARE GP-MONITOR (INSTRUMENT PANEL) | ||
| 6. | 528-3431 Y | [1] | HARNESS AS-PANEL (INSTRUMENT PANEL) | |
| 7. | 263-5928 M | [8] | SCREW-TRUSS HEAD (M5X0.8X25-MM) | |
| 8. | 4P-7581 | [2] | CLIP (LADDER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49830506
311-0794: WIRING GP-REAR
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(FUEL PRIMING) | |
| 2. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 3. | 7W-9943 | [1] | SENDER-TEMPERATURE (ENGINE COOLANT) | |
| 4B-4274 | [1] | WASHER (5.5X13X1.2-MM THK) | ||
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 4. | 8W-8527 | [1] | SLEEVE | |
| 5. | 123-3688 | [1] | PLATE AS | |
| 7L-0811 | [1] | DOWEL | ||
| 6. | 123-3689 | [1] | PLATE AS | |
| 9D-1541 | [1] | STUD | ||
| 7. | 123-3692 | [1] | ARM | |
| 8. | 123-3695 | [1] | PLATE | |
| 9. | 139-2116 Y | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 10. | 177-2215 | [4] | STRAP-DUAL CLAMP | |
| 11. | 187-1008 | [1] | SENDER AS-POSITION (ARTICULATION) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (15-CM) | |||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 308-0291 | [1] | HARNESS AS-SENSOR (TRANSMISSION SPEED) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 126-1766 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 13. | 308-6403 | [1] | BRACKET AS | |
| 14. | 322-7341 | [1] | BRACKET AS | |
| 15. | 326-3120 | [1] | BRACKET AS | |
| 16. | 334-0575 | [1] | HARNESS AS-TRANSMISSION | |
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(88-CM) | |||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2255 | [4] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [25] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 3E-6287 | [1] | PLUG AS-CONNECTOR | ||
| 110-6844 | [1] | SEAL | ||
| 101-0205 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 110-6844 | SEAL | |||
| 8T-8737 | [69] | PLUG-SEAL | ||
| 8T-8730 | [67] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [77] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(45-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 9X-3402 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 17. | 334-0576 | [1] | HARNESS AS-REAR CHASSIS (RELAY) | |
| 235-2765 E | CONDUIT-FLEXIBLE (27.6-MM ID)(91-CM) | |||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 127-5483 | [2] | PLUG AS-CONNECTOR (1-PIN) | ||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1547 | [2] | SOCKET-CONNECTOR (6-GA) | ||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 9X-4997 | [1] | TERMINAL AS | ||
| 9X-4998 | [1] | SOCKET (14-GA TO 16-GA) | ||
| 131-1489 | [2] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 2L-8079 | [3] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 18. | 334-0577 | [1] | HARNESS AS-SENSOR (ENGINE) | |
| 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 19. | 334-0578 | [1] | HARNESS AS-REAR CHASSIS (TAIL) | |
| 235-2765 E | CONDUIT-FLEXIBLE (27.6-MM ID)(83-CM) | |||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [11] | PLUG-SEAL | ||
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 20. | 109-0361 | [1] | FILM-INSTRUCTION (ENGINE SHUTDOWN) | |
| 21. | 130-5300 | [8] | CLIP | |
| 22. | 132-5789 | [3] | CLIP (LADDER) | |
| 23. | 133-3260 | [1] | SPACER (11X19X10-MM THK) | |
| 24. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 25. | 147-0385 | [1] | CLIP | |
| 26. | 172-6833 | [1] | CLIP (LOOP) | |
| 27. | 193-2550 Y | [1] | SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT) | |
| 28. | 1V-1984 | [1] | CLIP | |
| 29. | 277-1873 | [1] | CLIP (LADDER) | |
| 30. | 3E-5169 | [1] | GUARD-SWITCH | |
| 31. | 2A-1162 | [1] | GASKET | |
| 32. | 4D-7794 | [10] | CLIP | |
| 33. | 4D-8123 | [3] | CLIP (LOOP) | |
| 34. | 4K-8864 | [4] | CLIP (LOOP) | |
| 35. | 4S-1936 | [1] | CLIP | |
| 36. | 4S-1962 | [2] | CLIP (LOOP) | |
| 37. | 4S-4455 | [7] | CLIP | |
| 38. | 5P-8167 | [3] | BOLT (3/8-16X0.625-IN) | |
| 39. | 5P-9085 | [1] | CLIP (LOOP) | |
| 40. | 6D-3479 | [4] | CLIP (LOOP) | |
| 41. | 6D-4244 | [4] | CLIP (LOOP) | |
| 42. | 6D-4246 | [4] | CLIP (LOOP) | |
| 43. | 4P-7581 | [1] | CLIP (LADDER) | |
| 45. | 6V-3265 | [2] | CLIP | |
| 46. | 6V-6893 | [3] | BOLT (6-32X0.375-IN) | |
| 47. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 48. | 130-2792 M | [1] | SCREW (M6X1X16-MM) | |
| 49. | 7C-4354 | [2] | CLIP | |
| 50. | 7D-7233 | [1] | CLIP (LOOP) | |
| 51. | 7K-1181 | [27] | STRAP-CABLE | |
| 52. | 7N-3718 | [1] | CLIP | |
| 53. | 8D-9671 | [1] | CLIP | |
| 54. | 8M-2773 | [1] | CLIP (LOOP) | |
| 55. | 8T-4121 | [58] | WASHER-HARD (11X21X2.5-MM THK) | |
| 56. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 57. | 8T-4137 M | [52] | BOLT (M10X1.5X20-MM) | |
| 58. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 59. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 60. | 8T-4226 | [1] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 61. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 62. | 8T-9364 | [2] | BOLT (1/4-20X0.625-IN) | |
| 63. | 8W-8909 | [1] | SLEEVE | |
| 64. | 8X-5489 | [4] | SLEEVE | |
| 65. | 9M-4972 | [1] | CLIP (LOOP) | |
| 66. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 67. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 68. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49830507
311-0802: WIRING GP-REAR
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT) | |
| 2. | 4S-5719 | [1] | SPACER (10.31X25X12.7-MM THK) | |
| 3. | 6V-4283 | [1] | PLATE-IDENTIFICATION (ALTERNATOR RESET) | |
| 4. | 6V-7555 | [1] | STRAP-CABLE | |
| 5. | 7K-1181 | [11] | STRAP-CABLE | |
| 6. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 7. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 8. | 9G-2758 | [1] | LOCKOUT-SWITCH | |
| 9. | 135-2543 | [2] | BOOT (RED) | |
| 10. | 171-2212 | [1] | CIRCUIT BREAKER AS (105-AMPERE)(MAIN) | |
| 10A. | 171-2212 | [1] | CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR) | |
| (EACH INCLUDES) | ||||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 11. | 186-3223 | [1] | PLATE AS | |
| 12. | 189-0108 | [1] | PLATE | |
| 13. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC AIR) | |
| 14. | 204-8000 | [1] | MOUNTING-CABLE TIE | |
| 15. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT) | |
| 16. | 289-9354 | [1] | CABLE AS | |
| 6V-2369 | [1] | CABLE (4-GA, BLACK) | ||
| 9G-4343 | [1] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 135-2543 | [2] | BOOT (RED) | ||
| 17. | 311-9296 | [1] | HARNESS AS-FUEL TANK | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [9] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 18. | 335-0806 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 19. | 344-9564 | [1] | HARNESS AS-SOLENOID | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 20. | 124-9633 | [1] | CLIP (SLOT) | |
| 21. | 130-5300 | [5] | CLIP | |
| 22. | 132-5789 | [1] | CLIP (LADDER) | |
| 23. | 332-7657 | [1] | SENDER AS-FUEL LEVEL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 24. | 3J-1907 | [1] | SEAL-O-RING | |
| 25. | 4D-7794 | [1] | CLIP | |
| 26. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 27. | 5L-4507 | [4] | SCREW-MACHINE (10-32X0.875-IN) | |
| 28. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 29. | 6V-7699 | [4] | WASHER-HARD (5.5X13X1.6-MM THK) | |
| 30. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 32. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 33. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 34. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 35. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 36. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 37. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| 38. | 8C-8422 B | SEALANT | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49830508
311-0802: WIRING GP-REAR
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-3534 CY | [1] | SWITCH GP-MAGNETIC (24-VOLT) | |
| 2. | 4S-5719 | [1] | SPACER (10.31X25X12.7-MM THK) | |
| 3. | 6V-4283 | [1] | PLATE-IDENTIFICATION (ALTERNATOR RESET) | |
| 4. | 6V-7555 | [1] | STRAP-CABLE | |
| 5. | 7K-1181 | [11] | STRAP-CABLE | |
| 6. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 7. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 8. | 9G-2758 | [1] | LOCKOUT-SWITCH | |
| 9. | 135-2543 | [2] | BOOT (RED) | |
| 10. | 171-2212 | [1] | CIRCUIT BREAKER AS (105-AMPERE)(MAIN) | |
| 10A. | 171-2212 | [1] | CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR) | |
| (EACH INCLUDES) | ||||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 11. | 186-3223 | [1] | PLATE AS | |
| 12. | 189-0108 | [1] | PLATE | |
| 13. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC AIR) | |
| 14. | 204-8000 | [1] | MOUNTING-CABLE TIE | |
| 15. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT) | |
| 16. | 289-9354 | [1] | CABLE AS | |
| 6V-2369 D | CABLE (4-GA, BLACK)(0.3-M) | |||
| 131-1478 | [1] | TERMINAL AS | ||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 135-2543 | [2] | BOOT (RED) | ||
| 17. | 311-9296 | [1] | HARNESS AS-FUEL TANK | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [9] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 18. | 335-0806 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 19. | 289-9355 C | [1] | CABLE AS | |
| 5P-5689 D | WIRE (8-GA, BLACK)(0.4-M) | |||
| 20. | 124-9633 | [1] | CLIP (SLOT) | |
| 21. | 130-5300 | [5] | CLIP | |
| 22. | 132-5789 | [1] | CLIP (LADDER) | |
| 23. | 332-7657 | [1] | SENDER AS-FUEL LEVEL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 24. | 3J-1907 | [1] | SEAL-O-RING | |
| 25. | 4D-7794 | [1] | CLIP | |
| 26. | 5C-9553 M | [5] | BOLT (M6X1X16-MM) | |
| 27. | 5L-4507 | [4] | SCREW-MACHINE (10-32X0.875-IN) | |
| 28. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 29. | 6V-7699 | [4] | WASHER-HARD (5.5X13X1.6-MM THK) | |
| 30. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 32. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 33. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 34. | 8T-4138 CM | [3] | BOLT (M6X1X20-MM) | |
| 35. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 36. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 37. | 9X-8256 C | [4] | WASHER (6.6X12X2-MM THK) | |
| 38. | 8C-8422 B | SEALANT | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49830509
373-6942: WIRING GP-REAR
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 3E-5239 | [1] | RELAY AS (24-VOLT)(FUEL PRIMING) | |
| 3. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 4. | 7K-1181 | [27] | STRAP-CABLE | |
| 5. | 8W-8527 | [1] | SLEEVE | |
| 6. | 109-0361 | [1] | FILM-INSTRUCTION (ENGINE SHUTDOWN) | |
| 7. | 123-3688 | [1] | PLATE AS | |
| 7L-0811 | [1] | DOWEL | ||
| 8. | 123-3689 | [1] | PLATE AS | |
| 9D-1541 | [1] | STUD | ||
| 9. | 123-3692 | [1] | ARM | |
| 10. | 123-3695 | [1] | PLATE | |
| 11. | 130-2792 M | [1] | SCREW (M6X1X16-MM) | |
| 13. | 177-2215 | [2] | STRAP-DUAL CLAMP | |
| 14. | 187-1008 | [1] | SENDER AS-POSITION (ARTICULATION) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 9X-1813 E | SLEEVE (15-CM) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 15. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 16. | 308-0291 | [1] | HARNESS AS-SENSOR (TRANSMISSION SPEED) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 17. | 308-6403 | [1] | BRACKET AS | |
| 18. | 318-1178 Y | [1] | SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT) | |
| 19. | 326-3120 | [1] | BRACKET AS | |
| 20. | 383-3442 | [1] | HARNESS AS-SENSOR (ENGINE) | |
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 21. | 334-0578 | [1] | HARNESS AS-REAR CHASSIS (TAIL) | |
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [11] | PLUG-SEAL | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 235-2765 E | CONDUIT-FLEXIBLE (27.6-MM ID)(83-CM) | |||
| 311-4859 E | TUBE-HEAT SHRINK (48-MM DIA)(30-CM) | |||
| 22. | 353-4515 | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 23. | 373-6943 | [1] | HARNESS AS-TRANSMISSION | |
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [25] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [107] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [119] | PLUG-SEAL | ||
| 9W-0844 | [15] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [82] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7K-1181 | [6] | STRAP-CABLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 126-1774 | [3] | COVER-CONNECTOR | ||
| 2L-8069 | [3] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2255 | [4] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2257 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(86-CM) | |||
| 311-4859 E | TUBE-HEAT SHRINK (48-MM DIA)(30-CM) | |||
| 24. | 373-6944 | [1] | HARNESS AS-REAR CHASSIS (RELAY) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1547 | [2] | SOCKET-CONNECTOR (6-GA) | ||
| 8T-8729 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [9] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [17] | PLUG-SEAL | ||
| 9W-1795 | [1] | BOOT | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8051 | [2] | TERMINAL-RING (6-GA, 5/16-IN SCREW) | ||
| -OR- | ||||
| 5P-3455 | [2] | TERMINAL-RING (8-GA, 5/16-IN SCREW) | ||
| 2L-8079 | [2] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 7N-9017 | [1] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 235-2765 E | CONDUIT-FLEXIBLE (27.6-MM ID)(91-CM) | |||
| 311-4859 E | TUBE-HEAT SHRINK (48-MM DIA)(30-CM) | |||
| 25. | 130-5300 | [8] | CLIP | |
| 26. | 132-5789 | [3] | CLIP (LADDER) | |
| 27. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 28. | 198-4777 | [2] | WASHER-HARD (11X25X10-MM THK) | |
| 29. | 1V-1984 | [1] | CLIP | |
| 30. | 277-1873 | [1] | CLIP (LADDER) | |
| 31. | 2A-1162 | [1] | GASKET | |
| 32. | 4D-7388 | [2] | CLIP (LOOP) | |
| 33. | 4D-7794 | [9] | CLIP | |
| 34. | 4D-8123 | [3] | CLIP (LOOP) | |
| 35. | 4K-8864 | [4] | CLIP (LOOP) | |
| 36. | 4P-8134 | [1] | CLIP (LADDER) | |
| 37. | 4P-7581 | [2] | CLIP (LADDER) | |
| 38. | 4S-1962 | [3] | CLIP (LOOP) | |
| 39. | 4S-4455 | [6] | CLIP | |
| 40. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 41. | 5P-8167 | [2] | BOLT (3/8-16X0.625-IN) | |
| 42. | 5P-9085 | [1] | CLIP (LOOP) | |
| 43. | 6D-3479 | [5] | CLIP (LOOP) | |
| 44. | 6D-4244 | [4] | CLIP (LOOP) | |
| 45. | 6D-4246 | [4] | CLIP (LOOP) | |
| 46. | 6V-3265 | [2] | CLIP | |
| 47. | 6V-6893 | [3] | BOLT (6-32X0.375-IN) | |
| 48. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 49. | 7C-4354 | [1] | CLIP | |
| 50. | 7D-7233 | [1] | CLIP (LOOP) | |
| 51. | 7N-3718 | [1] | CLIP | |
| 52. | 8D-9671 | [1] | CLIP | |
| 53. | 8M-2773 | [1] | CLIP (LOOP) | |
| 54. | 8T-4121 | [54] | WASHER-HARD (11X21X2.5-MM THK) | |
| 55. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 56. | 8T-4137 M | [47] | BOLT (M10X1.5X20-MM) | |
| 57. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 58. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 59. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 60. | 8T-4226 | [1] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 61. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 62. | 8T-9364 | [2] | BOLT (1/4-20X0.625-IN) | |
| 63. | 8W-8909 | [1] | SLEEVE | |
| 64. | 8X-5489 | [4] | SLEEVE | |
| 65. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 66. | 344-0050 | [1] | BRACKET AS | |
| 67. | 4B-4274 | [6] | WASHER (5.5X13X1.2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
