AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

515-2775 STEERING AR-SECONDARY S/N JJA1-UP 12K MOTOR GRADER


HYDRAULIC SYSTEM
STEERING GP
PUMP GP
SWIVEL GP
TANK GP
VALVE & LINKAGE GP

MOTOR GRADER 12K MOTOR GRADER JJA
 12K Motor Grader JJA00001-UP (MACHINE) POWERED BY C7 Engine SEBP4983 12K JJA   (2009)

HYDRAULIC SYSTEM

STEERING GP
515-2775 STEERING AR-SECONDARY
 

#SEBP49830790
 

515-2775: STEERING AR-SECONDARY

515-2775 STEERING AR-SECONDARY
S/N JJA1-UP
i06890501 SEBP4983
  For full view, you need register

Parts for your 12K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  512-9878 Y [1] ACCUMULATOR & MTG GP-HYDRAULIC  
  501-7250 Y [1] LINES GP-SECONDARY STEERING  
  516-7319 Y [1] MOUNTING GP  
  515-0060 Y [1] WIRING GP-SECONDARY STEERING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49830791
 

100-3416: SWASHPLATE GP

100-3416 SWASHPLATE GP -VARIABLE
S/N JJA1-UP
PART OF 6E-3137 PUMP GP-PISTON
i00125613 SEBP4983
1003416 SWASHPLATE GP Parts scheme
  For full view, you need register

Parts for your 12K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-0532 [2] BLOCK-STOP  
2. 8F-7219 [2] SEAL-O-RING  
 

#SEBP49830792
 

260-6502: SWIVEL GP

260-6502 SWIVEL GP -CIRCLE DRIVE
S/N JJA1-UP
PART OF 106-4787, 372-3879, 434-8069, 434-8070 LINES GP-HYDRAULIC
i02322216 SEBP4983
2606502 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 12K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 8J-2331 [7] SEAL  
3. 173-1008 [1] ROTOR  
4. 173-1009 [1] RETAINER  
5. 223-0580 [1] COVER  
7. 260-6501 [1] BODY  
8. 173-1007 [2] SEAL  
9. 1P-3700 [4] SEAL-RECTANGULAR  
10. 2H-3928 [7] SEAL-O-RING  
11. 4J-9964 [2] SEAL  
12. 5P-2566 [6] BOLT (1/2-13X1.5-IN)  
13. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
 

#SEBP49830793
 

260-6502: SWIVEL GP

260-6502 SWIVEL GP -CIRCLE DRIVE
S/N JJA484-UP
PART OF 106-4787, 372-3879, 434-8069, 434-8070, 532-8161 LINES GP-HYDRAULIC
i06627839 SEBP4983
2606502 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 12K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 8J-2331 [7] SEAL  
3. 454-3032 [1] ROTOR  
4. 173-1009 [1] RETAINER  
5. 5P-2566 C [2] BOLT (1/2-13X1.5-IN)  
6. 454-2957 [1] BODY  
7. 148-8395 C [4] PLUG AS  
    (EACH INCLUDES)
  9S-8005 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
8. 173-1007 [2] SEAL  
9. 2H-3928 [7] SEAL-O-RING  
10. 4J-9964 [2] SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP49830794
 

214-1984: TANK & FILTER GP-HYDRAULIC

214-1984 TANK & FILTER GP-HYDRAULIC
S/N JJA1-UP
PART OF 214-1983 TANK & MTG GP-HYDRAULIC
i01747049 SEBP4983
2141984 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 12K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-2913 [1] PIN-CLEVIS  
2. 1R-0774 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)  
3. 2S-5100 [1] VALVE-MANUAL (HYDRAULIC TANK)  
4. 3F-1547 [1] SEAL-O-RING  
6. 4M-6921 [1] WASHER-SPRING  
7. 5D-1911 [1] COVER-HYDRAULIC CAP  
8. 226-2871 [1] ROD  
9. 9J-1979 [1] RETAINER AS  
12. 9J-3047 [1] STRAINER (HYDRAULIC)  
13. 9M-7394 [1] LEVER  
14. 141-9661 [1] SPACER (20X128X6-MM THK)  
15. 226-2870 [1] CAP AS (HYDRAULIC TANK)  
16. 214-1982 [1] TANK AS  
17. 217-2661 [1] GAUGE-SIGHT (HYDRAULIC)  
18. 086-0507 [1] PIN  
19. 1L-5072 [1] DOWEL  
20. 2D-4202 [1] PLATE  
21. 2J-7761 [1] RING-RETAINING  
22. 3K-6060 [1] LOCKNUT (3/8-16-THD)  
23. 3G-0361 [1] GASKET (HYDRAULIC TANK FILL CAP)  
25. 7D-1195 [1] SEAL-O-RING  
26. 7H-1447 [1] CAP-FILLER (HYDRAULIC TANK)  
27. 8T-2275 [1] BALL  
28. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 9H-6454 [1] GASKET  
31. 3B-4611 [1] PIN-COTTER  
  M   METRIC PART
 

#SEBP49830795
 

214-1983: TANK & MTG GP-HYDRAULIC

214-1983 TANK & MTG GP-HYDRAULIC
S/N JJA1-UP
PART OF 346-3710 GENERAL AR, 434-8090 HYDRAULIC AR
i01707184 SEBP4983
2141983 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 12K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP  
  5P-8500 [1] KEY  
2. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 214-1984 Y [1] TANK & FILTER GP-HYDRAULIC  
4. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49830796
 

341-6675: VALVE & LINKAGE GP

341-6675 VALVE & LINKAGE GP
S/N JJA1-UP
PART OF 355-6242 CONTROL AR-HYDRAULIC
i03627275 SEBP4983
3416675 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 341-6220 Y [1] VALVE GP-BANK 6 (RH)  
2. 124-3329 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (RIPPER)  
4A. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
5A. 8D-5634 [1] LEVER (CENTERSHIFT)  
6. 8X-4277 [11] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
7. 8D-5633 [1] LEVER (SIDESHIFT)  
7A. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
8A. 101-2458 [1] LEVER (SCARIFIER)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [13] BEARING  
11. 8D-5636 B [10] SHIM (0.254-MM THK)  
12. 8D-5637 B [10] SHIM (0.762-MM THK)  
13. 6L-1962 [11] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [22] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [22] LOCKWASHER  
16. 8D-5641 [11] BEARING  
17. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
18. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
19. 2G-6749 [1] KNOB-SIDESHIFT  
20. 2G-6747 [1] KNOB-BLADE TIP  
21. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
21A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
22. 2G-6751 [1] KNOB-CIRCLE DRIVE  
23. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
24. 2G-6756 [1] KNOB-WHEEL LEAN  
25. 2G-6752 [1] KNOB-ARTICULATION  
26. 2G-6755 [1] KNOB-CENTERSHIFT  
27. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 9M-1853 [6] MOUNTING  
29. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 2G-6753 [1] KNOB-SCARIFIER  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
41. 2G-6740 [1] KNOB-RIPPER  
42. 103-1597 [1] LEVER (BULLDOZER LIFT, PLOW)  
43. 8W-0456 [2] SHAFT  
44. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
45. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49830797
 

341-8565: VALVE & LINKAGE GP

341-8565 VALVE & LINKAGE GP -6-BANK, RH; 5-BANK, LH
S/N JJA1-UP
PART OF 355-6244 CONTROL AR-HYDRAULIC
i03627290 SEBP4983
3418565 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [22] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [11] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [10] SHIM (0.254-MM THK)  
8. 8D-5637 B [10] SHIM (0.762-MM THK)  
9. 8D-5640 [13] BEARING  
10. 8D-5641 [11] BEARING  
11. 8W-0456 [2] SHAFT  
12. 8X-4277 [11] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [1] LEVER (RIPPER)  
15A. 101-2457 [1] LEVER (ARTICULATION)  
16. 101-2458 [1] LEVER (BLADE TIP)  
16A. 101-2458 [1] LEVER (SCARIFIER)  
17. 103-1597 [1] LEVER (BULLDOZER LIFT, PLOW)  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4516 [1] SHAFT  
23. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
24. 244-2585 [1] TUBE AS  
25. 244-2589 [1] TUBE AS  
26. 244-2594 [1] TUBE AS  
27. 244-2598 [1] TUBE AS  
28. 250-0550 Y [1] VALVE GP-BANK 5 (LH)  
29. 341-6226 Y [1] VALVE GP-BANK 6 (RH)  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
32. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  206-5122 [1] TEE  
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
33. 2G-6740 [1] KNOB-RIPPER  
34. 2G-6747 [1] KNOB-BLADE TIP  
35. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
36. 2G-6749 [1] KNOB-SIDESHIFT  
37. 2G-6751 [1] KNOB-CIRCLE DRIVE  
38. 2G-6752 [1] KNOB-ARTICULATION  
39. 2G-6753 [1] KNOB-SCARIFIER  
40. 2G-6755 [1] KNOB-CENTERSHIFT  
41. 2G-6756 [1] KNOB-WHEEL LEAN  
42. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
43. 3J-1907 [4] SEAL-O-RING  
44. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
45. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
46. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
47. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
48. 6V-8188 [2] NUT (1/2-13-THD)  
49. 6V-8397 [8] SEAL-O-RING  
50. 6V-9836 [2] TEE-SWIVEL  
51. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
52. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
53. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
54. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
55. 8T-9041 [4] CONNECTOR  
56. 8T-9043 [22] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49830798
 

342-2154: VALVE & LINKAGE GP

342-2154 VALVE & LINKAGE GP -4-BANK, RH; 4-BANK, LH
S/N JJA1-3177
PART OF 346-3710 GENERAL AR
i03572513 SEBP4983
3422154 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3327 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
5A. 8D-5634 [1] LEVER (CENTERSHIFT)  
6. 8X-4277 [8] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
7. 8D-5633 [1] LEVER (SIDESHIFT)  
7A. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [10] SHIM (0.254-MM THK)  
12. 8D-5637 B [10] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
22A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49830799
 

342-2154: VALVE & LINKAGE GP

342-2154 VALVE & LINKAGE GP -4-BANK, RH; 4-BANK, LH
S/N JJA10100-UP
i06923788 SEBP4983
3422154 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 12K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3032 CY [1] VALVE GP-BANK 4 (RH)  
2. 6E-3038 CY [1] VALVE GP-BANK 4 (LH)  
3. 490-1143 [2] RETAINER  
4. 490-1103 C [1] LEVER (ARTICULATION)  
5. 490-1104 C [1] LEVER (BLADE LIFT, LH)  
5A. 490-1104 C [1] LEVER (CENTERSHIFT)  
6. 490-1110 CY [8] ROD AS-ADJUSTING  
7. 490-1105 C [1] LEVER (SIDESHIFT)  
7A. 490-1105 C [1] LEVER (WHEEL LEAN)  
8. 490-1107 C [1] LEVER (BLADE TIP)  
9. 512-5977 C [2] SPACER  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [10] SHIM (0.254-MM THK)  
12. 8D-5637 B [10] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 490-1106 C [1] LEVER (CIRCLE DRIVE)  
22A. 490-1106 C [1] LEVER (BLADE LIFT, RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 12K :

SHAFT GP-PUMP DRIVE
311-0514 SHAFT GP-PUMP DRIVE
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
ROTATING GP-PUMP
100-3412 ROTATING GP-PUMP
ROD AS-ADJUSTING
490-1110 ROD AS-ADJUSTING
PUMP GP-PISTON
6E-3137 PUMP GP-PISTON
PUMP GP-PISTON
6E-3136 PUMP GP-PISTON
PUMP & MTG GP-STEERING
434-8063 PUMP & MTG GP-STEERING
PUMP & MTG GP-STEERING
299-5543 PUMP & MTG GP-STEERING
SWASHPLATE GP
100-3416 SWASHPLATE GP
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
VALVE & LINKAGE GP
341-6675 VALVE & LINKAGE GP
VALVE & LINKAGE GP
341-8565 VALVE & LINKAGE GP
VALVE & LINKAGE GP
342-2154 VALVE & LINKAGE GP

Truck sale:

 
 
Caterpillar 12K
- motor graders
FINNING CHILE S.A.
 
 
Caterpillar 12K
- motor graders
FINNING CHILE S.A.
Caterpillar 12 K
 
Caterpillar 12 K
- motor graders
TRACSA
Caterpillar 12 K
 
Caterpillar 12 K
- motor graders
Finning Bolivia S.A.
Caterpillar 12K, motor graders, Construction
167,000 
Caterpillar 12K, motor graders, Construction
- motor graders
Finning Bolivia S.A.
Bolivia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.